Teollisuusjätevesien sadetustyöryhmän loppuraportti

Spray irrigation of industrial waste water.

Teollisuuden jätevedet

Engl. summary: Industrial waste water

Effects of surface treatments and size of fly ash particles on the compressive properties of epoxy based particulate composites

Particulate reinforcements for polymers are selected with dual objective of improving composite properties and save on the total cost of the system. In the present study fly ash, an industrial waste with good properties is used as filler in epoxy and the compressive properties of such composites are studied. Particle surfaces are treated chemically using a silane-coupling agent to improve the compatibility with the matrix. The compressive properties of these are compared with those made of untreated fly ash particulates. Furthermore properties of fly ash composites with two different average particle sizes are first compared between themselves and then with those made using the as-received bimodal nature of particle size distribution. Microscopic observations of compression tested samples revealed a better adherence of the particles with the matrix in case of treated particles and regards the size effect the composites with lower average particle size showed improved strength at higher filler contents. Experimental values of strengths and modulii are compared with some of the theoretical models for composite properties. (C) 2002 Kluwer Academic Publishers.

Evaluation of isopentane, R-245fa and their mixtures as working fluids for organic Rankine cycles

Low grade thermal energy from sources such as solar, geothermal and industrial waste heat in the temperature range of 380-425 K can be converted to electrical energy with reasonable efficiency using isopentane and R-245fa. While the former is flammable and the latter has considerable global warming potential, their mixture in 0.7/0.3 mole fraction is shown to obviate these disadvantages and yet retain dominant merits of each fluid. A realistic thermodynamic analysis is carried out wherein the possible sources of irreversibilities such as isentropic efficiencies of the expander and the pump and entropy generation in the regenerator, boiler and condenser are accounted for. The performance of the system in the chosen range of heat source temperatures is evaluated. A technique of identifying the required source temperature for a given output of the plant and the maximum operating temperature of the working fluid is developed. This is based on the pinch point occurrence in the boiler and entropy generation in the boiling and superheating regions of the boiler. It is shown that cycle efficiencies of 10-13% can be obtained in the range investigated at an optimal expansion ratio of 7-10. (C) 2012 Elsevier Ltd. All rights reserved.

Discharge Plasma Combined With Bauxite Residue for Biodiesel Exhaust Cleaning: A Case Study on NOx Removal

Experiments were conducted at laboratory level to treat the oxides of nitrogen (NOx) present in raw and dry biodiesel exhaust utilizing a combination of electric discharge plasma and bauxite residue, i. e., red mud, an industrial waste byproduct from the aluminum industry. In this paper, the adsorption and a possible catalytic property of bauxite residue are discussed. Nonthermal plasma was generated using dielectric barrier discharges initiated by ac/repetitive pulse energization. The effect of corona electrodes on the plasma generation was qualitatively studied through NOx cleaning. The plasma reactor and adsorbent reactors were connected in cascade while treating the exhaust. The diesel generator, running on biodiesel fuel, was electrically loaded to study the effectiveness of the cascade system in cleaning the exhaust. Interestingly, under the laboratory conditions studied, plasma-bauxite residue combination has shown good synergistic properties and enhanced the NOx removal up to about 90%. With proper scaling up, the suggested cascade system may become an economically feasible option to treat the exhaust in larger installations. The results were discussed emphasizing the role of bauxite residue as an adsorbent and as a room temperature catalyst.

Biodiesel Exhaust Treatment with HFAC Plasma supported by Red Mud: Study on DeNOx and power consumption

The concentration of Nitrogen Oxides (NOx) in engines which use biodiesel as fuel is higher compared to conventional diesel engine exhaust. In this paper, an attempt has been made to treat this exhaust using a combination of High frequency AC (HFAC) plasma and an industrial waste, Red Mud which shows proclivity towards Nitrogen dioxide (NO2) adsorption. The high frequency AC source in combination with the proposed compact double dielectric plasma reactors is relatively more efficient in converting Nitric Oxide (NO) to NO2. It has been shown that the plasma treated gas enhances the activity of red mud as an adsorbent/catalyst and about 60-72% NOx removal efficiency was observed at a specific energy of 250 J/L. The advantage in this method is the cost effectiveness and abundant availability of the waste red mud in the industry. Further, power estimation studies were carried out using Manley's equation for the two reactors employed in the experiment and a close agreement between experimental and predicted powers was observed. (C) 2015 The Authors. Published by Elsevier Ltd.

Trace Metal Sensors for Coastal Monitoring, Seaside, California, April 11-13, 2005: workshop proceedings

The Alliance for Coastal Technologies (ACT) Workshop on Trace Metal Sensors for Coastal Monitoring was convened April 11-13, 2005 at the Embassy Suites in Seaside, California with partnership from Moss Landing Marine Laboratories (MLML) and the Monterey Bay Aquarium Research Institute (MBARI). Trace metals play many important roles in marine ecosystems. Due to their extreme toxicity, the effects of copper, cadmium and certain organo-metallinc compounds (such as tributyltin and methylmercury) have received much attention. Lately, the sublethal effects of metals on phytoplankton biochemistry, and in some cases the expression of neurotoxins (Domoic acid), have been shown to be important environmental forcing functions determining the composition and gene expression in some groups. More recently the role of iron in controlling phytoplankton growth has led to an understanding of trace metal limitation in coastal systems. Although metals play an important role at many different levels, few technologies exist to provide rapid assessment of metal concentrations or metal speciation in the coastal zone where metal-induced toxicity or potential stimulation of harmful algal blooms, can have major economic impacts. This workshop focused on the state of on-site and in situ trace element detection technologies, in terms of what is currently working well and what is needed to effectively inform coastal zone managers, as well as guide adaptive scientific sampling of the coastal zone. Specifically the goals of this workshop were to: 1) summarize current regional requirements and future targets for metal monitoring in freshwater, estuarine and coastal environments; 2) evaluate the current status of metal sensors and possibilities for leveraging emerging technologies for expanding detection limits and target elements; and 3) help identify critical steps needed for and limits to operational deployment of metal sensors as part of routine water quality monitoring efforts. Following a series of breakout group discussions and overview talks on metal monitoring regulatory issues, analytical techniques and market requirements, workshop participants made several recommendations for steps needed to foster development of in situ metal monitoring capacities: 1. Increase scientific and public awareness of metals of environmental and biological concern and their impacts in aquatic environments. Inform scientific and public communities regarding actual levels of trace metals in natural and perturbed systems. 2. Identify multiple use applications (e.g., industrial waste steam and drinking water quality monitoring) to support investments in metal sensor development. (pdf contains 27 pages)

Modelagem e otimização de misturas ternárias de polipropileno (PP), borracha de etileno-propileno-dieno (EPDM) e pó de pneu (SRT).

O aumento nos rejeitos industriais e a contínua produção de resíduos causam muitas preocupações no âmbito ambiental. Neste contexto, o descarte de pneus usados tem se tornado um grande problema por conta da pequena atenção que se dá à sua destinação final. Assim sendo, essa pesquisa propõe a produção de uma mistura polimérica com polipropileno (PP), a borracha de etileno-propileno-dieno (EPDM) e o pó de pneu (SRT). A Metodologia de Superfície de Resposta (MSR), coleção de técnicas estatísticas e matemáticas úteis para desenvolver, melhorar e optimizar processos, foi aplicada à investigação das misturas ternárias. Após o processamento adequado em extrusora de dupla rosca e a moldagem por injeção, as propriedades mecânicas de resistência à tração e resistência ao impacto foram determinadas e utilizadas como variáveis resposta. Ao mesmo tempo, a microscopia eletrônica de varredura (MEV) foi usada para a investigação da morfologia das diferentes misturas e melhor interpretação dos resultados. Com as ferramentas estatísticas específicas e um número mínimo de experimentos foi possível o desenvolvimento de modelos de superfícies de resposta e a otimização das concentrações dos diferentes componentes da mistura em função do desempenho mecânico e além disso com a modificação da granulometria conseguimos um aumento ainda mais significativo deste desempenho mecânico.

Implicações da Lei n. 12.690 de 2012 para as cooperativas de catadores de materiais recicláveis.

Este trabalho visa analisar as implicações da Lei n. 12.690 de 2012 para as cooperativas de trabalho em relação à situação organizacional, socioeconômica e às condições gerais de trabalho, em particular, no caso das cooperativas de catadores de material recicláveis. A pesquisa tem caráter exploratório e qualitativo. Como procedimento, adotou-se a revisão da literatura, complementada com entrevistas dirigidas às lideranças de cooperativas de catadores localizadas no Estado do Rio de Janeiro. É inegável que esta lei é um marco para os trabalhadores de cooperativas. Dentre outros, ela visa regulamentar os aspectos socioeconômicos da organização e propiciar garantias mínimas nas relações de trabalho, tais como: número mínimo de sete trabalhadores para abrir uma cooperativa; retirada de um salário mínimo mensal; remuneração do trabalho noturno superior à do diurno; duração do trabalho não superior a oito horas diárias e 44 horas semanais; repouso semanal remunerado; além de estabelecer em assembleia, os fundos para possibilitar outros direitos dos sócios, dentre eles a saúde e segurança no trabalho. O estudo concluiu que considerável parte dos entrevistados desconhece a referida lei e que o fator econômico é um dos aspectos de maior impacto na sua aplicação. Contudo, eles poderão ser superados com a efetividade das políticas públicas a fim de compensar os custos adicionais que terão as cooperativas com a aplicação desta lei. Recomenda-se a implantação de programas municipais de coleta seletiva de resíduos com a participação ativa dos catadores, como determina a Política Nacional de Resíduos Sólidos, sendo fundamental o envolvimento de todos os setores da sociedade. Além disso, que a nova lei das cooperativas de trabalho seja mais divulgada e debatida com os setores interessados. Deve-se aperfeiçoar os programas dirigidos às cooperativas de catadores, com maior incentivo à reciclagem, através da redução ou isenção dos impostos para as atividades de reciclagem e dos materiais reciclados, por exemplo. Nas áreas de saúde e segurança do trabalho, é importante a criação de normas específicas para esta categoria de trabalhadores em conformidade com a sua realidade. Espera-se que a pesquisa contribua para a melhor aplicação prática da lei analisada nas cooperativas. Como proposta de estudos futuros, sugere-se a criação de indicadores para o monitoramento da aplicação da Lei n. 12.690 de 2012 após a sua regulamentação, os quais poderão ser utilizados com a finalidade de garantir a melhoria contínua e fortalecer as cooperativas de trabalho, em particular, as de catadores de materiais recicláveis.

Estudo isotópico e geoquímico dos sedimentos costeiros da Costa Verde do Estado do Rio de Janeiro para identificação de atividades antrópicas

A Costa Verde se localiza no estado do Rio Janeiro, onde também está localizada a Ilha Grande, importante polo turístico do estado. É composta pelas baías Sepetiba e Ilha Grande, que podem ser compartimentadas em diversas enseadas. As principais enseadas são Sepetiba, Marambaia, Mangaratiba, Angra dos Reis, Ribeira, Frade e Paraty. O presente estudo foi realizado nas enseadas de Mangaratiba, Angra dos Reis e Ribeira e foram compilados dados de Sepetiba e Marambaia estudado por outros autores. O objetivo do estudo destas enseadas foi identificar os metais e suas fontes e os mecanismos que os controlam, além de propor novos parâmetros de concentração de metais que indiquem processos de contaminação. O método utilizado foi a coleta de sedimento de fundo através da utilização de Van Veen e analisados por digestão total em espectrômetro de massa da qual se obteve a concentração dos elementos Ca, Cd, Co, Cr, Cu, K, Pb, Na, Ni, Sr, S, U, V e Zn, além das razões isotópicas de chumbo, com prioridade da razão 206Pb/207Pb. Foram obtidos resultados que indicam que a enseada de Mangaratiba apresenta as maiores concentrações de metais e com predominante contribuição antrópica cujas fontes são, os empreendimentos localizados na costa dessa enseada, incluindo o TEBIG. A enseada de Angra dos Reis também apresenta concentrações elevadas de metais, provenientes de efluentes domésticos, rejeito industrial ao qual se inclui o estaleiro Verolme e com forte controle do embasamento da enseada. A enseada da Ribeira tem seus metais fornecidos pelo porto de Bracuhy e uma fonte desconhecida que são controlados, em parte, pelos efluentes da CNAAA. Em relação a interação entre as cinco enseadas existe mútua troca de metais controlados pela dinâmica da Costa e acentuada pelo Canal de Ilha Grande (que liga as duas baias), onde a dispersão dos metais também é controlada por temperatura, fração sedimentar, profundidade e salinidade. Os principais metais relacionados às fontes antrópicas na Costa Verde são Co, Cr, Cu, Mn, Ni, Pb e Zn. As concentrações hoje apresentadas na resolução CONAMA não atendem a realidade da Costa Sul brasileira, sendo então propostos novos parâmetros de controle, menos permissivo

Ecology and settlement of marine fouling in the Suez Bay, Egypt

This study deals with seasonal variations, natural correlations and similarities of fouling assemblages on exposure panels in the Suez Bay during January 1992 to January 1993. Three main sources of pollutions flow into the bay; industrial waste products, domestic drainage of Suez city and ships' oil and refuse.The fouling assemblages on the test pan els after various periods (1, 2 and 3 months) belonged mainly to the algae (Ulva rigida), polychaetes (Hydroides elegans), Cirripedes (Balanus amphitrite) and amphipods. The fouling at the lst station was relatively more dense than at the 2nd station during the summer and autumn seasons. The lowest productivity was achieved at the 3rd station which was considered less polluted being offshore water. The overall paucity of fouling in the bay is because of the silt covering the submerged surfaces, particularly at the 2nd station, leading to the prevention of the settlements or establishment of fouling organisms. The seasonal changes in the intensity of fouling assemblages on submerged surfaces in seawater seems to be closely related to seasonal variations in water temperature. The great fouling communities on the buoys and long exposure panels showed a remarkable variety of species and density rather than on short term exposures, which were more dense during warmer months.

Heavy metals in certain commercially important finfish off Mahim in Mumbai coastal waters

The coastal water of the metropolitan city of Mumbai has deteriorated due to the indiscriminate discharge of untreated sewage and industrial waste in huge quantities. Mahim creek is one such locality surrounded by a large number of industrial units discharging heavy metals. The accumulation of the heavy metals Cu, Cd, Zn and Pb in finfishes (Coilia dussumeri, Lepturacanthus savala, Harpodon nehereus and Johnieops elongates) from this locality along with that in the sediment was studied. The rate of accumulation of Cu was high compared to Cd, Zn and Pb. A gradual increase in the bioaccumulation of heavy metals was noticed in fishes with increase in average body weight and length, perhaps due to biomagnification. A declining trend in concentration of heavy metals horizontally from inshore to offshore was observed in these fishes.

Biomonitoring of polycyclic aromatic hydrocarbons (PAH) and heavy metals Ni, V in sediments and anodonts of the Anzali Lagoon and applicability of netural red retention assay (NRR) as biomarkers of these pollutants

Biochemical ecotoxicology and biomarkers using are a new sciences that are used for biomonitoring in aquatic environment. Biomonitoring plays a vital role in strategies to identify, assess, and control contaminants. On the other hands in recent year's attention to polycyclic Aromatic Hydrocarbons (PAHs) and heavy metals increased in aquatic environments because of their carcinogenic and mutagenic properties combined with their nearly ubiquitous distribution in depositional environments by oil pollution or industrial waste waters. The present research aimed to assess PAHs and Ni, V levels in surface sediments and bivalves (Anodonta cygnea)and the effects of PAHs and heavy metals (Ni,V) on the hemocyte of the Anodonta cygnea were investigated in 2 stations (Mahrozeh, Selke in Anzali Lagoon, North of Iran). Samples were collected during at 2 different periods of the year, Dry and rain seasons, (June & September) and to confirm our first observations, Cage station is added. The bivalves hemocytes were monitored for membrane injury by NRR methods (neutral red retention assay). Heavy metal (Ni, V) concentrations were determined by Atomic Absorption in Anodonta cygnea and the sediments in Anzali Lagoon. The vanadium concentration in bivalves and sediments was ND(not detect )-0.4231 μg/g and 1.4381-306.9603 μg/g dry weight respectively. Nickel concentration in bivalves and sediments was 0.0231-1.3351, 0.4024-19.3561 μg/g dry weight respectively. PAHs concentrations were determined by GC-Mass in Anodonta cygnea and the sediments. Average concentration of PAHs is 115-373.788 ng/g dry weight in bivalves and average concentration of PAHs is 34.85-1339.839 ng/g dry weight in sediments. Bioaccumulation sediments factor(BASF) is high about PAHs (>1) and BASF is low for Ni, V (<1) . Internal Damage mechanisms of bivalves hemocytes (cell mortality, dye leakage, decreased membrane stability, are observed (Lowe Methods). Statistical analysis was used to explore the relationship between altered cellular and above contaminants. There are power and negative correlations between PAHs and NRR method for hemocytes in Anodonta cygnea (P<0.0005), but good correlation is not observed between Ni, V and NRR method for hemocytes in every time. This research indicates that the NRR assay is a useful screening technique able to discriminate polluted sites and at first we announce that Anodonta cygnea hemocytes are efficient biomarker for PAHs pollutants in fresh water.

Polycyclic aromatic hydrocarbons in Ya-Er Lake (Hubei, China): sources and distribution

Sources and distribution of polycyclic aromatic hydrocarbons (PAH) in the Ya-Er Lake area (Hubei, China) sediment cores of 3 ponds in the shallow Ya-Er Lake were investigated for 16 PAH. Analytical procedure included extraction by ultrasonication, clean-up by gel-permeation and quantification by HPLC with fluorescence detection. The total PAH amount in sediment samples of the Ya-Er Lake ranged from 68 to 2242 mu g/kg. Concentrations decreased from pond 1 to pond 3 and from upper to lower sediment layers. In addition a soil sample from Ya-Er Lake area showed a total PAH amount of 58 mu g/kg. The PAH pattern in lower sediment layers were similar to that of the soil sample which indicates an atmospheric deposition into the sediments prior to 1970 only. The PAH profile of upper sediment samples, which differs completely from that of lower layers, may be explained by a gradually increasing input of mixed combustion and raw fuel sources since 1970. Therefore the origin of increased PAH contamination in Ya-Er Lake during the last 3 decades has been probably an industrial waste effluent in pond 1.

藻体对水环境中N、P及重金属Cu2+、Pb2+、Cd2+、Cr6+的吸附特征研究

随着全球生态环境的恶化，各国日益重视对水体中各种污染物的治理。利用藻类的吸收、富集和降解作用，可以去除污水中的营养物质、重金属离子和有机污染物，与其他物理、化学及工程的方法相比，该技术具有以下优点：成本低、能耗小、治理效果较好，对环境污染小，有利于资源化，有利于整体生态环境的改善，是治理水质污染的新途径。 本文利用几种大型海藻对富营养化海水进行处理，结果发现孔石莼、刚毛藻均有很强的吸收N、P的能力，吸收能力依次为褶曲刚毛藻>束生刚毛藻>孔石莼。水体中褶曲刚毛藻3 g/L含量，在3～5小时之内，可把中等以上富营养化海水中的N、P降低至一类海水水平。利用刚毛藻处理富营养化地下海水和养殖废水，进行海参和大菱鲆养殖试验，探索藻类净化水质和废水循环利用的新模式，使水体保持较低的营养盐状态，减轻养殖废水对环境的影响，实现了海水养殖业与环境的可持续发展。 刚毛藻在我国近海滩涂分布广泛，利用它来处理富营养化水体，并和水产养殖业相结合，既净化水体，使养殖废水能循环利用，满足水产养殖的需求，又改善水产业生态环境。同时，将回收藻体生产优质饲料、食品和药物等，实现藻类资源的高值利用。刚毛藻营养丰富，用其替代鼠尾藻作海参饲料，资源丰富，成本低，效果好，是一种值得加以开发利用的宝贵资源，具有广泛的应用前景。 生物吸附法是一种经济有效的移除废水中有害重金属离子的方法。由于藻类细胞壁中的多聚糖可提供吸附重金属的位点，廉价而蕴藏丰富的海藻对多种重金属表现出很强的吸附能力。所以本文通过分批实验，研究了非活体刚毛藻对水体中重金属Cu2+、Pb2+和Cd2+的吸附影响因子、吸附热力学、吸附动力学及吸附机理，得到了平衡等温线及动力学数据。吸附过程的最佳pH值为5.0，吸附量随温度的升高而增加，水体中常见的Na+、K+、Ca2+、Mg2+阳离子及Cl-、NO3-、SO42-、C2O42-等阴离子的存在对吸附的影响并不显著。EDTA存在时，吸附百分率大大降低。吸附等温线符合Langmuir和Freundlich方程。刚毛藻对重金属Cu2+、Pb2+和Cd2+的吸附容量很高，25℃时，对Cu2+、Pb2+和Cd2+的最大吸附容量分别为1.61 mmol/g、0.96 mmol/g和0.98 mmol/g，且吸附过程为吸热反应。刚毛藻对重金属Cu2+、Pb2+和Cd2+的吸附过程为化学吸附，在吸附过程中藻体表面的官能团可能与金属离子发生了螯合作用。吸附动力学过程符合pseudo-二级动力学模型，在初始的30min内，吸附速率很快，随后速率逐渐降低。解吸试验表明，用EDTA可以对重金属进行回收，刚毛藻可以循环利用。实验结果表明刚毛藻是一种高效、经济实用的生物吸附材料，可用来吸附回收水体中的重金属Cu2+、Pb2+和Cd2+等。 通过非活体刚毛藻对重金属Cr6+的吸附影响因子、吸附动力学、吸附机理的研究发现，刚毛藻对Cr6+具有很强的还原能力，对电镀废水中的Cr6+的还原去除提供了非常好的方法。吸附过程的最佳pH值为2～3，实际电镀废水通常在此pH范围，因此处理实际废水时，首先在原酸性条件下，对Cr6+进行还原去除，然后调废水pH至5.0，继续进行吸附，去除其他二价离子及被还原的三价Cr离子，实现了利用同一材料还原Cr6+为Cr3+，并将Cr3+和其他重金属离子同时去除。通过对机理的讨论，认为刚毛藻对Cr6+的生物吸附过程不是一个简单的“离子交换过程”，而是一个“吸附还原过程”。在海藻量足够的前提下，只要时间足够长，Cr6+可被彻底还原去除。 利用工业废弃物褐藻渣，对水体中重金属离子Cu2+、Pb2+、Cd2+及Cr6+的生物吸附特性分别进行了讨论，结果表明褐藻渣对重金属离子的吸附特性与刚毛藻一致，吸附等温线符合Langmuir和Freundlich方程，在25℃时，pH为5.0时，由Langmuir方程求出褐藻渣对Cu2+、Pb2+和Cd2+的最大吸附容量分别为4.20 mmol/g、3.13 mmol/g和2.97 mmol/g。褐藻渣对低、高浓度的重金属Cr6+都具有很强的吸附能力，且移除效果比较彻底。实际应用结果表明，褐藻渣是一种高效、经济实用的生物吸附材料，可用来吸附回收水体中的重金属离子，具有广泛的应用前景。