Bryophytes of urban industrial streetscapes in Victoria, Australia

The bryophyte floristics of industrial/commercial streetscapes of urban Victoria and the importance of various substrata to species richness were explored. Species richness was low compared to healthy natural environments. Thirty mosses from 14 families, and six liverworts, each from different families, were identified. Most species occurred at fewer than 30% of sites, showing the patchy nature of their distribution. Only three species occurred at more than half the sites. Markedly higher species richness occurred on soil than on any other substratum. Epiphytes were extremely few. The low bryodiversity of streetscapes, the patchy nature of the bryophytes and the high number of colonists suggest that the streetscapes have not fulfilled their potential in providing connectivity between urban and non-urban areas. Colonists characteristically occur early in the successional sequence of disturbed areas but, as streetscapes are continually disturbed, colonists effectively are climax species for this habitat. Better management of streetscapes to provide more complex habitat is needed to enable colonisation of these areas by bryophyte species that are more representative of our ever-shrinking natural habitats.

Alterações hematológicas induzidas por poluição industrial em moradores e industriários de Cubatão, SP (Brasil)

Foram analisados 496 indivíduos de Cubatão, SP (Brasil), cidade com alto teor de poluição industrial, com o objetivo de verificar alterações hematológicas induzidas por poluentes industriais. Dos estudos citológicos dos eritrócitos dessa população estudada, foram observadas 188 (38%) com alterações, isoladas ou combinadas em um único indivíduo, das quais 26% apresentaram policromatofilia, 24% com pontilhados basófilos, 15% com corpos de Heinz, e 8% com reticulocitose. As freqüências de metahemoglobinemia e sulfohemoglobinemia foram,respectivamente, de 35% e 32% em moradores da vila Parisi - um bairro cercado pela maioria das indústrias de Cubatão - 15% e 5% em operários das indústrias, e 12% e 4% em habitantes de áreas distantes entre 3 e 8 km do polo industrial. Esses resultados indicam que as alterações são causadas por poluentes tóxico-oxidantes e que as conseqüências fisio-patológicas no sangue dos moradores de Cubatão parecem indicar que estão relacionadas com o tempo de exposição e com a proximidade dos focos emissores de poluentes.

Precipitation chemistry in semi-arid areas of Southern Africa: A case study of a rural and an industrial site

Experimental data on the precipitation chemistry in the semi-arid savanna of South Africa is presented in this paper. A total of 901 rainwater samples were collected with automatic wet-only samplers at a rural site, Louis Trichardt, and at an industrial site, Amersfoort, from July 1986 to June 1999. The chemical composition of precipitation was analysed for seven inorganic and two organic ions, using ion chromatography. The most abundant ion was SO(4)(2-) and a large proportion of the precipitation is acidic, with 98% of samples at Amersfoort and 94% at Louis Trichardt having a pH below 5.6 ( average pH of 4.4 and 4.9, respectively). This acidity results from a mixture of mineral and organic acids, with mineral acids being the primary contributors to the precipitation acidity in Amersfoort, while at Louis Trichardt, organic and mineral acids contribute equal amounts of acidity. It was found that the composition of rainwater is controlled by five sources: marine, terrigenous, nitrogenous, biomass burning and anthropogenic sources. The relative contributions of these sources at the two sites were calculated. Anthropogenic sources dominate at Amersfoort and biomass burning at Louis Trichardt. Most ions exhibit a seasonal pattern at Louis Trichardt, with the highest concentrations occurring during the austral spring as a result of agricultural activities and biomass combustion, while at Amersfoort it is less pronounced due to the dominance of relatively constant industrial emissions. The results are compared to observations from other African regions.

Influence of Sources and Meteorology on Surface Concentrations of Gases and Aerosols in a Coastal Industrial Complex

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Lidar observation campaign of sugar cane fires and industrial emissions in the State of São Paulo, Brazil

Brazil has an important role in the biomass burning, with the detection of approximately 100,000 burning spots in a single year (2007). Most of these spots occur in the southern part of the Amazon basin during the dry season (from August to november) and these emissions reach the southeast of the country, a highly populated region and with serious urban air pollution problems. With the growing demand on biofuels, sugarcane is considerably expanding in the state of São Paulo, being a strong contributor to the bad air quality in this region. In the state of São Paulo, the main land use are pasture and sugarcane crop, that covers around 50% and 10% of the total area, respectively. Despite the aerosol from sugarcane burning having reduced atmospheric residence time, from a few days to some weeks, they might get together with those aerosol which spread over long distances (hundreds to thousands of kilometers). In the period of June through February 2010 a LIDAR observation campaign was carried in the state of São Paulo, Brazil, in order to observe and characterize optically the aerosols from two distinct sources, namely, sugar cane biomass burning and industrial emissions. For this purpose 2 LIDAR systems were available, one mobile and the other placed in a laboratory, both working in the visible (532 nm) and additionally the mobile system had a Raman channel available (607 nm). Also this campaign counted with a SODAR, a meteorological RADAR specially set up to detect aerosol echoes and gas-particle analyzers. To guarantee a good regional coverage 4 distinct sites were available to deploy the instruments, 2 in the near field of biomass burning activities (Rio Claro and Bauru), one for industrial emissions (Cubatão) and others from urban sources (São Paulo). The whole campaign provide the equivalent of 30 days of measurements which allowed us to get aerosol optical properties such as backscattering/extinction coefficients, scatter and LIDAR ratios, those were used to correlate with air quality and meteorological indicators and quantities. In this paper we should focus on the preliminary results of the Raman LIDAR system and its derived aerosol optical quantities. © 2010 Copyright SPIE - The International Society for Optical Engineering.

Avaliação da presença de vapores no solo em antiga área industrial contaminada por hidrocarbonetos: concentrações medidas e simuladas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da gestão de áreas contaminadas de uma unidade industrial, localizada no município de Cubatão, São Paulo

Pós-graduação em Geociências e Meio Ambiente - IGCE

Assinaturas geoelétricas em área contaminada por hidrocarboneto no pólo industrial de Cubatão - SP

Pós-graduação em Geociências e Meio Ambiente - IGCE

Assessment of surface water in two Amazonian rivers impacted by industrial wastewater, Barcarena City, Pará State (Brazil)

No ano de 2007, águas superficiais foram coletadas a partir de 21 pontos de amostragem na cidade de Barcarena, Região Norte, Brasil: um ponto de amostragem localizado em um pequeno córrego que recebe descarga de resíduos a partir da indústria de beneficiamento do caulim e deságua no Rio Curuperê, três pontos de amostragens localizados próximos de fontes que emergem na margem esquerda e deságuam no Rio Curuperê, nove pontos de amostragem no Rio Curuperê, que deságua no Rio Dendê, e oito no Rio Dendê, afluente da margem esquerda do Rio Pará. Para todas as amostras de água foram quantificadas 14 variáveis físico-químicas e níveis de 12 metais. Os resultados nos pontos próximos das fontes do Rio Curuperê apresentaram perfil físico-químico e níveis de metais típicos para águas superficiais e esses valores foram utilizados como referência para comparar e identificar possíveis alterações nas características químicas para os demais pontos de amostragem. Quando os resultados das fontes do rio Curuperê foram comparados com os resultados do ponto próximo a descarga de resíduos industriais foram observadas fortes alterações nos valores de 6 variáveis físico-químicas (pH, condutividade elétrica (EC), total de sólidos suspensos (TDS), nitrogênio amoniacal (N-NH4), sulfato (SO4) e salinidade) e aumento em magnitude dos níveis de quatro metais (Al, Fe, Mn e Zn), caracterizando que esses resíduos eram descarregados no ambiente sem tratamentos adequados. Os resultados nos demais pontos de amostragem demonstraram que estas condições anômalas também foram encontradas ao longo dos Rios Curuperê e Dendê, principalmente durante a maré baixa. A partir desta caracterização química das águas foram identificadas condições prejudiciais aos ecossistemas aquáticos e potencial risco à saúde da população local que usa os rios para consumo, recreação e transporte.

Utilização de peixes nativos da Amazônia como biomarcadores na avaliação da qualidade da água de uma área industrial no rio Pará - PA - Brasil

A dissertação foi elaborada no formato de artigo, intitulado de “Immunohistochemical and structural biomarkers in two fish species exposed to the industrial area in Amazon Estuary”, submetido à revista Environmental Monitoring and Assessment, formatado segundo os padrões da revista, não contendo resumo em português.

Evaluation of the genotoxicity of waters impacted by domestic and industrial effluents of a highly industrialized region of So Paulo State, Brazil, by the comet assay in HTC cells

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of sample matrix on the alkaline extraction of Cr(VI) in soils and industrial materials

An accurate and efficient determination of the highly toxic Cr(VI) in solid materials is important to determine the total Cr(VI) inventory of contaminated sites and the Cr(VI) release potential from such sites into the environment. Most commonly, total Cr(VI) is extracted from solid materials following a hot alkaline extraction procedure (US EPA method 3060A) where a complete release of water-extractable and sparingly soluble Cr(VI) phase is achieved. This work presents an evaluation of matrix effects that may occur during the hot alkaline extraction and in the determination of the total Cr(VI) inventory of variably composed contaminated soils and industrial materials (cement, fly ash) and is compared to water-extractable Cr(VI) results. Method validation including multiple extractions and matrix spiking along with chemical and mineralogical characterization showed satisfying results for total Cr(VI) contents for most of the tested materials. However, unreliable results were obtained by applying method 3060A to anoxic soils due to the degradation of organic material and/or reactions with Fe2+-bearing mineral phases. In addition, in certain samples discrepant spike recoveries have to be also attributed to sample heterogeneity. Separation of possible extracted Cr(III) by applying cation-exchange cartridges prior to solution analysis further shows that under the hot alkaline extraction conditions only Cr(VI) is present in solution in measurable amounts, whereas Cr(III) gets precipitated as amorphous Cr(OH)3(am). It is concluded that prior to routine application of method 3060A to a new material type, spiking tests are recommended for the identification of matrix effects. In addition, the mass of extracted solid material should to be well adjusted to the heterogeneity of the Cr(VI) distribution in the material in question.

Monitoring of industrial exposure for chloracne

This study (1) established comedogenicity dose response curves for the pure compounds of 3,3$\sp\prime$,4,4$\sp\prime$-tetrachloroazobenzene (TCAB) and 3,3$\sp\prime$,4,4$\sp\prime$-tetrachloroazoxybenzene (TCAOB) individually and as a couple-compound using a rabbit ear model; (2) used a rabbit ear model to establish comedogenicity potential for TCAB and TCAOB as they existed in a given industrial herbicide manufacture process; (3) evaluated actual environmental contamination in a herbicide industrial setting by air monitoring and wipe sampling; (4) biologically monitored potentially exposed workers for alterations in follicular orifice size as an index of actual exposure to chloracnegenic compounds; and (5) biologically monitored potentially exposed workers for changes in weight, cholesterol, triglycerides and blood sugar.^ A silastic monomer mold (an objective measure) was used to measure change in follicular orifice size over time. This required taking impressions of (1) skin of the forehead and right and left malar crescents of workers and (2) the skin of the external ear of the rabbit. Molds were stained using a solution of hematoxylin and digitized using a Nikon UFX microscope (magnification 300 X), a drawing tube and a digitizing tablet attached to an IBM Personal Computer. Comedogenicity assays were used to establish dose-response curves for TCAB, TCAOB and the couple-compound TCAB + TCAOB.^ No evidence of chloracne or toxicity was observed in any of the workers. Nor, was there a statistically significant increase in size of follicular orifice means measured over time. This was attributed to extensive personal and environmental hygiene programs along with teaching the workers about chloracne, its cause and its prevention. These programs may have been the greatest factor in preventing the development of chloracne in this group of workers. Monitoring of the plant environment showed relatively high concentrations of the couple-compound (TCAB + TCAOB). Comedogenicity assays showed a linear dose-response relationship over time for TCAB, TCAOB and the couple-compound. An antagonistic action was found for the TCAB/TCAOB of the couple-compound; such action may provide some protection to workers in this type of setting. It is speculated that the observed antagonistic action may be due to the difference in binding affinities of TCAB/TCAOB for receptor sites. ^

Vanguardias figurativas y arquitectura industrial en el período entreguerras (1918-1939)

Una de las características más interesantes que define a las Vanguardias Figurativas de comienzos del siglo XX es su fascinación por el mundo industrial como punto de ruptura con el pasado y fe en el progreso: la velocidad, la industrialización, las posibilidades de la electricidad, el maquinismo?, son elementos comunes a movimientos como el Futurismo o el Constructivismo, donde Arte, Arquitectura e Ingeniería se dan la mano en obras integradoras a medio camino entre lo utópico y lo visionario. De especial interés resulta el estudio de las obras industriales diseñadas y construidas en el período denominado de "entreguerras" (entre la Primera y la Segunda Guerra Mundial, 1918-1939), entre las que podríamos destacar los dibujos de Sant¿Elia, la presa de Klingenberg, de Poelzig y, sobre todo, los proyectos de Casto Fernández-Shaw. Este singular arquitecto ideó, entre 1918 y 1919, lo que él llamaría un "Monumento al Triunfo de la Civilización, a las Grandes Conquistas de la Idea, a las Victorias del Hombre sobre la Naturaleza, a la Paz Universal". Se trata en realidad de una gran presa (construcción que Casto asocia con el avance de la tecnología y el conocimiento humano), de aires egipcios con dos potentísimos pilonos que arrojan sendos haces de luz hacia el cielo. Aunque el proyecto nunca se llevó a cabo, estas ideas futuristas y utópicas nunca abandonarían a Casto y supondrían una notable influencia en el resto de su obra. En esta comunicación analizaremos estos interesantes ejemplos de arquitectura industrial, relacionándolos no sólo entre sí y con el resto de obras de sus autores, sino también con otros edificios construidos posteriormente pero profundamente influidos por estas corrientes vanguardistas (como la presa de Grandas de Salime, 1948-1954, de Joaquín Vaquero Palacios).

O AGENDAMENTO DE TELEJORNAIS BRASILEIROS EM SITES NOTICIOSOS DE CONTEÚDO COLABORATIVO

The thesis investigates if with the free news production, people who post information on collaborative content sites, known as interacting, tend to reproduce information that was scheduled for Tv news. This study is a comparison of the collaborative content vehicles Vc reporter, Vc no G1 and Eu reporter with TV news SBT Brasil, Jornal Nacional, Jornal da Record and Jornal da Band. We sought to determine whether those newscasts guide the collaborative platforms. The hypothesis assumes that Brazilian TV news have been building over time a credible relationship with the viewer, so it is possible to think that the interacting use the same criteria for selecting the broadcasts and reproduce similar information in collaborative content sites. The method used was content analysis, based on the study of Laurence Bardin and the type of research used was quantitative. This research concluded that, within a small portion of the universe surveyed, there are schedules of television news across the collaborative content.