Estudo para a implementação de um sistema de desbaste de cobre para manufatura de placas de circuito impresso

This paper presents a study on the development of a manufacturing system of printed circuit boards through copper milling. An advantage of this system is the replacement of chemical processes by physical process presenting a sustainable solution. The paper uses programs that will generate G-code needed to establish the coordinates where the milling forms the tracks. After obtaining the code, it will be transformed into steps that will be sent through the serial port to the microcontroller and the serial communication control will be in software. After obtaining information the microcontroller will execute the movement of the stepper motors through their drivers, H-bridge, the microcontroller also drives the spindle motor responsible for rotating the grinding tool, using a driver with a optocoupler and TRIAC

A visibilidade do idoso no jornalismo impresso: uma análise das matérias culturais da Folha de São Paulo

The improvements on the quality of life are causing the number of the elderly to grow on a global level, which is causing changes in our society. This new phenomenon demands that some actions are executed in several areas. On the communications field, it is needed to put the older people in the spotlight, so they can know themselves better and be included in the society. The goal of this work is to investigate if there is visibility for the elderly on Folha de São Paulo, using the daily cultural section (Ilustrada) and the weekly papers (the extinct Mais! and Ilustríssima) as a basis for the study. In order to find out the main aspects of the newspaper’s coverage, the Content Analysis is going to be used, a methodology that includes quantitative and qualitative techniques and which intent is to reveal the material’s implicit content. Through it, it will to be possible to understand how the elderly are treated on Folha de São Paulo, and what can be done to better their position in the newspaper

Reciclagem de poliestireno expandido: compósito com fibras de algodão para a confecção de placas de circuito impresso

In this work polymeric composites reinforced with cotton fibers, from the textile industry, were developed in order to manufacture printed circuit boards. It was used expanded polystyrene (EPS) as a thermoplastic matrix by melting it. For the obtention of 10% and 15% of fiber volume fraction in cotton fibers composites, it was used wasted cotton fibers as an incentive of recycling and reusing of the domestic and industrial wastes as well as for Expanded Polystyrene(EPS). The mechanical properties of the composites were evaluated by tensile and flexural strength from standardized test methods. Composites were characterized by a Scanning Electron Microscopy (SEM), Thermogravimetry (TG/DTG), Differential Scanning Calorimetry (DSC) and dielectric analysis. The analysis of the results showed that fiber in the composite directly influenced in the thermal and mechanical properties

Reciclagem de poliestireno expandido: compósito com fibras de sisal para confecção de placas de circuito impresso

In this work polystyrene composites reinforced with recycled sisal fibers were processed, in order to apply in the manufacture of printed circuit boards. A thermoplastic matrix of recycled polystyrene was used, this material came from waste expanded polystyrene (EPS) used in appliance's packages. Composites were prepared with 15% and 25% of sisal fibers. To obtain the composites, wasted EPS and natural sisal fibers were chosen, to encourage recycling and reuse of household waste and also the use of renewable resources. The composites were analyzed by standard tensile and flexural test, in order to verify the mechanical properties of the material. The characterization of the composite was done by scanning electron microscopy (SEM) , thermogravimetry (TGA / DTG) , differential scanning calorimetry (DSC) and dielectric analysis . The analysis of the results showed that the percentage of fibers in the composite influences directly the thermal and mechanical properties. Plates with a lower percentage of fibers showed superior properties at a higher percentage. The composite material obtained is easy to process and it's use is feasible for the confection of printed circuit boards, considering it's mechanical, thermal and insulative properties

Implantação do sistema kanban para elementos de fixação em maquinas de movimentação de terra

Always seeking the maximum profit under the reduced production time and lower number of failures, companies are increasingly evolving and going after continuous improvement in order to remain competitive in the market. Thus, increasingly there is investment in the management system Lean manufacturing. Lean system is very important, because through it, the maximum value is added in the final product. Being measured by the efficiency and reducing failures to zero. In the studied company, Lean manufacturing system came into effect through the kanban system for purchasing, control and distribution of bulk material used in the assembly of the final product, which are earth-moving machines. It is very important to check the great change made in the company with the implementation of kanban. All inventory management becomes visual, elements are arranged in an organized manner, with addresses in structures, calculated in special boxes and finally, assemblers have the guarantee of an item supply, with the distribution cars located on their assembly area. This study participates effectively assuring the supply. Avoiding any failure on the lack of material, non-compliance of delivery times to the customer and maintenance of over-stock or obsolete inventory, in which case both cause financial loss to the company

A influência da música nas atividades físicas e sua impressão no corpo e nos estados de ânimo

Numerous studies in physical education and music's area have been conducted to improve the quality of life and health of people, all of them under physiological, psychological and social fields. Thus, when properly analyzed, both Areas are connected, because the movement itself, main subject of physical education, has a close proximity to the rhythm, an essential element of music. That's why it is important to discover the benefits of this relationship, because, in many of its practices, physical education makes use of music, for example, in aerobic gymnastic and dance classes. As a consequence, this study aims to investigate, through literature, the influence of music in physical activities and its imprinting in the states of mind and body of practitioners, as well as clarify the criteria for choice of songs that are used in such practice. This research occurred under literary explore, done through theoretical analysis of the thematic. At first place, a contextualization of the auditory system and its relationship with the music and the perception of sound were made, then the main theme was explored. The music, even before generate and influence motor and psychic movements in the human body, is already moving in space, because it is formed through vibrations of molecules. It is decoded first as a movement from the ears, and then decoded as sound, when in the brain. It is important to worry about sounds at high intensities and also with those which are outside the hearing thresholds within physical activities involving music, because they may be harmful to health and also to states of mind. As far as music and movement is concerned, they are closely linked, and the human being has an instinctive sense of rhythm that can be seen when listening to music, because the motor cortex is also activated. Therefore, it is important to work the sound and body movement together, because in practice they are inseparable and they contribute greatly to...

Referenciação multimodal: a construção de objetos-de-discurso no jornal impresso Folha de S. Paulo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Utilização de material alternativo para a obtenção e caracterização de biomodelos, por meio da técnica de impressão 3DPRINTER

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Um processo para utilizar a tecnologia de impressão 3D na construção de instrumentos didáticos para o ensino de Ciências

Pós-graduação em Educação para a Ciência - FC

A utilização de material didático impresso para o ensino de um modelo de classificação do esporte na educação física escolar

Pós-graduação em Desenvolvimento Humano e Tecnologias - IBRC