981 resultados para Ice cream
Resumo:
This degree project was made in cooperation with AssiDomän Frövi and Charlotte Andersson and the main objectivehas been to create to ice cream pacbges from 250 gsm Frövi Light board. The paekages are intended to be easilyresealable while decreasing in size together with the ice cream. The project also describes the food packaging labelsand symbols currently present in the European common market.Both capsules utilize a separate lid for resealing. One of the paekages (Capsuie A) is indended to be cut along withthe ice cream and thereby decrease in size. The other one (Capsuie B) uses a series of flaps for contracting and expandingwhich enab1es adjusting of the size without cutting the package up.The design for Capsuie A is created both as a series of flavours with a super-hero theme intended for children andwith a colfee flavour for a maturer audience. For Capsule B, a design was created for a sorbet.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Nowadays, Brazil has both the greatest goat herd and the greatest goat milk production of South America. The state of Rio Grande do Norte, located in northeast of Brazil, has an average year production of three thousand cubic meters of goat milk in natura. Part of this milk production is homemade and it comes from small farms, which unite in rural cooperatives created to encourage the production and implementation of industrial processes for preservation and processing of milk. Results presented by literature and obtained from preliminary essays in this thesis show that non conventional dryer of spouted bed with inert particles is able to produce powder milk from in natura milk (cattle or goat), with the same quality of spray dryer, however, operating at low cost. The method of drying in spouted bed consists of injecting milk emulsion on the bed of inert particles gushed by hot air. This emulsion covers the particles with a thin film, which dries and is reduced to powder during the circulation of inerts inside the bed. The powder is dragged by exhaustion air and separated in the cyclone. The friction among particles resulted from the particles circulation, encourages high taxes of shear in the thin film of emulsion, breaking the cohesive forces and making this process possible. Studying the drying process and the powder goat milk production in one unit of spouted bed with inert particles, seeing the development of a low cost technological route for powder milk production is the aim of this thesis. The powder milk produced by this route must attend the local demand of food industries which need an intermediate product to be used as a food ingredient (ice-cream, milk candy). In order to reach this aim, this thesis approaches the aspects related to physical, thermodynamics and physic-chemicals characteristics of goat milk, whose complete data are still inexistent in the literature. The properties of materials are of great importance to the project of any process which involves the operations of transportation of movement, heat and mass quantity, such as the dryers which operate in fluid dynamically active regime, like the spouted bed. It was obtained new data related to the goat milk properties in function of concentration of solids and temperature. It is also important to mention the study developed about the kinetic of solids retention in the bed of inert particles during the drying of goat milk. It was found more adequate processes conditions to the proposed technological route to be implemented in small and micro-industries, with simplifications in the system of milk injection as well as in the form of operation of the dryer. Important data were obtained for a posterior stage of this research which involves the v modeling, simulation, control and optimization of the process. The results obtained in this thesis, in relation to process performance as well as to the quality of produced powder milk validate the proposal of using the spouted bed dryer in the production of powder goat milk
Resumo:
This work targetet the caprine ice cream production added with probiotic bacteria Bifidobacterium animalis subsp. lactis. It is divided into two parts. In the first one, four caprine ice cream formulations were evaluated, in which it was used hydrogenated fat (F1 and F3) or fat substitute (F2 and F4) in two different flavors (F1 and F2, passion fruit, F3 and F4, guava). Statistical differences (p<0.05) were detected for their physical-chemical properties, mainly for total solids and fat, but no differences were observed for melting test results. When it went to sensory acceptance, all four ice cream formulations reached high acceptance indexes, mostly formulation F4, which was selected for further studies. In the second part, F4 formulation was prepared with the addition of probiotic bacteria Bifidobacterium animalis subsp. lactis. The growth kinetics was studied and it was observed that the cellular concentration peak was reached after four fermentation hours (10.14 log UFC/g). This time was selected for pre-fermentation procedure and posterior addition at ice cream syrup. In this part of the study, two experimental groups were evaluated: group G1, in which the probiotic addition occurred before the maturation step and group G2, which included a pre-fermentation step and probiotic addition after ice cream maturation. The physical-chemical properties of these two ice cream groups were similar, except for pH, which was higher for group G2 (p<0.05). G1 samples had superior melting rate (3.566 mL/min) and both groups presented microbiological and sanitary results in accordance to current Brazilian legislation. Also, G1 and G2 were considered sensory accepted due to their acceptance indexes higher than 70%. G1 and G2 sensory profiles were similar (p>0.05), and both ice cream samples exhibited high creaminess (6.76 to 6.91) and mouth melting sensation (6.53 to 6.67) scores, while low sandiness scores (0.85 to 0.86) were observed, positive characteristics for this kind of food product. During the first 24 hours after ice cream production, the population of B. animalis subsp. lactis decreased, reaching 7.15 e 6.92 log CFU/g for G1 and G2, respectively. Probiotic bacteria counts fluctuated in ice cream samples during the first 108 days at frozen storage, especially for G2 group. Decreased probiotic viability was observed for G1 samples during the first 35 days of frozen storage, mild variation between 35 and 63 days and stabilized counts were observed after this time. After 21 days at frozen storage, ice cream samples of G1 and G2 groups reached 1.2 x 109 and 1.3 x 109 CFU/portion, respectively. After 108 days under these storage conditions, the survival rate of B. animalis subsp. lactis was 94.26% and 81.10% for G1 and G2 samples, respectively. After simulation of gastroenteric conditions, G2 group reached 9.72 x 105 CFU/portion. Considering the current requirements of Brazilian legislation, which stipulates that functional foods must have minimum probiotic count between 108 and 109 CFU/portion and detectable probiotic bacteria after being submitted to gastroenteric conditions, it is concluded that the ice cream with the addition of Bifidobacterium animalis subsp. lactis made as shown in this work, can be considered as a dairy functional food
Resumo:
Realizou-se exame microbiológico em 24 amostras de sorvetes não pasteurizados, todos preparados de maneira não industrial e à base de leite (creme, nata, chocolate), fabricados por 12 sorveterias diferentes da cidade de Araraquara, SP. Colheram-se duas amostras de cada sorveteria com intervalo de 15 dias entre as colheitas. Realizaram-se as seguintes provas: contagem de bactérias aeróbicas ou facultativas mesófilas e psicrófilas e de Staphylococcus aureus; determinação do Número Mais Provável (NMP) de coliformes totais e fecais e da presença de Salmonella. As técnicas utilizadas foram aquelas convencionalmente usadas para tais determinações. Não foi encontrada Salmonella em nenhuma das amostras e de cerca de 16,6% delas isolou-se Staphylococcus aureus. em proporções variáveis verificou-se a presença de microrgarnismos deteriorantes e daqueles indicadores de poluição de origem fecal.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Biotecnologia - IQ
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Agronomia (Horticultura) - FCA
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
O consumo de polpas de frutas e seus derivados vem sendo notavelmente incrementado, dadas suas propriedades nutricionais, a grande variedade de sabores e aromas, e a demanda cada vez maior por produtos com características sensoriais do alimento “in natura”. As polpas são utilizadas para consumo direto ou como matéria-prima na indústria de sucos, sorvetes, iogurtes etc. O processo de sua obtenção deve ser realizado em condições de higiene adequadas, seguido de acondicionamento e armazenamento também apropriados, de modo a assegurar a integridade e a qualidade do produto. O objetivo deste estudo foi o de avaliar as condições higiênico-sanitárias de polpas de cupuaçu e bacuri comercializadas no município de Belém, considerando que o seu processamento implica manipulação direta dos frutos, nem sempre por mãos convenientemente preparadas para este ofício. Sua realização contou com o indispensável apoio da Divisão de Vigilância Sanitária da Secretaria Municipal de Saúde, do Laboratório Central do Estado do Pará (LACEN) e do Laboratório de Parasitologia do Centro de Ciências Biológicas da Universidade Federal do Pará. O método correspondeu a análises microbiológicas, microscópica e parasitológica de 33 amostras coletadas em 11 feiras-livres, precisamente aquelas em que esses produtos são regularmente oferecidos à venda, distribuídas em igual número de bairros da cidade de Belém e da vila de Icoaraci. Foram examinadas 22 amostras de cupuaçu e 11 de bacuri. A análise microbiológica correspondeu à pesquisa de coliformes a 45ºC, mediante a técnica do número mais provável (NMP), e à pesquisa de Salmonella sp., em obediência ao prescrito na resolução RDCnº12/2001/ANVISA. Os resultados foram todos negativos. O exame microscópico, realizado em observância à Instrução Normativa nº1/2000 do Ministério da Agricultura e Abastecimento, não logrou revelar a presença de sujidades em qualquer das amostras. A análise parasitológica foi feita pelo método de Faust, todas as amostras apresentando ausência de cistos de protozoários e ovos de helmintos. A despeito da observação macroscópica das condições higiênico-sanitárias do ambiente das feiras-livres, muito sugestivas de fácil contaminação do produto, todas 33 amostras de polpas de cupuaçu e bacuri foram consideradas adequadas para o consumo, por atenderem às exigências da legislação vigente. Isto talvez seja devido ao grau de acidez e à presença de ácido cítrico em ambos os produtos, e ainda ao processo de congelamento a que são submetidos.
Resumo:
It was aimed to evaluate the chemical composition of grass silage-mombasa associated with different additives in four times of opening the silo. The experiment was conducted in UFGD. After harvesting the forage, biomass in natura crushed, was taken to the lab, homogenized and enriched on the basis of natural mass, with the following additives: 5% wheat bran, 5% of waste (broken grain and soy ice cream cone) of soybean, 5% urea in natural matter and the witness (without additive). The silos were opened after (unprocessed material), 15, 30 and 45 days, for the analysis of chemical composition. The data obtained were analyzed through the statistical programme SISVAR and averages were compared to 5% of probability, by Skott-Knot. The grass silage-mombasa without additive presented major (P<0.05) dry matter content compared to other treatments at time 0 and 30 days of silage and did not differ (P>0.05) of grass silage- mombasa associated with 5 of urea in 15 days and 45 of silage. The grass silage-mombasa with 5% urea showed the highest crude protein content at time 0 and differed from other treatments. The silage of mombasa associated with 5% urea provided greater in vitro digestibility of dry matter to 15 days of silage.
Resumo:
Food poisoning can cause infection on its consumers by the presence of pathogenic bacteria, such as Salmonella and Staphylococcus aureus. Therefore, it is important to check its quality, which can be affected by many factors. The sanitary quality of foods can be assessed by thermotolerant coliform. Since food safety is a matter of great concern, this study aimed to evaluate the hygienic sanitary conditions of samples of ice cream and desserts marketed in the city of Botucatu, by determining the most probable number (MPN) of thermotolerant coliform, identification and enumeration of coagulase positive staphylococci and verification of classical enterotoxin production by strains of S. aureus and also for detecting the presence of Salmonella sp. Among the ice cream analyzed, 56.3% were unfit for consumption and between the creamy desserts, the percentage of unfit samples was 33.3%. Coagulase positive Staphylococcus and Salmonella were not found in the samples. It is then an inadequacy in handling and / or storage conditions in a considerable number of samples, indicating need for improvement in the conditions of preparation
Resumo:
Increasingly competitive markets have driven the search for companies in many different ways to win and keep customers. The service level is basically the performance of companies in fulfilling the orders made, or how companies demonstrate to their clients efforts in their behalf. This work aims to solve the difficulties faced by a multinational company present in Brazil, in the distribution of its products in the category Ice Cream in order to improve the service level of their customers. Review the logistics network and concepts related to the distribution system of products is one of several ways to achieve this goal, as well as the use of IT and tools to assist in planning and programming of the physical distribution of products. In this study we used the concept of direct distribution system called Transit Point (TP). The TP provides at the same time, a strategy of rapid response, flexibility, low transportation costs and no inventory. A router - software capable of simulating the actual conditions experienced in the daily distribution - was used to assist in calculations. Results showed reductions of up to 47.5% in transportation costs and better conditions were provided in the distribution of products, positively impacting on service levels and in the maintenance of products quality, with a reduction of 1.6% of the total costs involve
Resumo:
In this work were prepared with three ice cream added peppers of different varieties: Capsicum baccatum, Capsicum annuum and Capsicum frutescens. The peppers were first pasteurized and evaluated in relation to the effect of heat treatment on the ascorbic acid content. Results showed that the Capsicum annuum showed higher ascorbic acid content, but the heat treatment resulted in greater loss of biocompounds. The higher retention of ascorbic acid was observed with Capsicum frutescens, which presented lower content of biocompound, but near of the pepper Capsicum annuum. The follow attributes was performed to evaluate the acceptance of ice cream through the sensory attributes: color, aroma, flavor and texture. Analysis of variance showed no significant difference between ice cream formulations at the 5% level of significance with regard to color, aroma and texture. Regarding taste, the samples differed significantly, at 5% significance, and the most preferred was the ice cream made with pepper Capsicum frutescens.