994 resultados para IT Steering Committees
Resumo:
Potential home buyers may initiate contact with a real estate agent by asking to see a particular advertised house. This paper asks whether an agent's response to such a request depends on the race of the potential buyer or on whether the house is located in an integrated neighborhood. We build on previous research about the causes of discrimination in housing by using data from fair housing audits, a matched-pair technique for comparing the treatment of equllay qualified black and white home buyers. However, we shift the focus from differences in the treatment of paired buyers to agent decisions concerning an individual housing unit using a sample of all houses seen during he 1989 Housing Discrimination study. We estimate a random effect, multinomial logit model to explain a real estate agent's joint decisions concerning whether to show each unit to a black auditor and to a white auditor. We find evidence that agents withhold houses in suburban, integrated neighborhoods from all customers (redlining), that agents' decisions to show houses in integrated neighborhoods are not the same for black and white customers (steering), and that the houses agents show are more likely to deviate from the initial request when the customeris black than when the customer is white. These deviations are consistent with the possibility that agents act upon the belief that some types of transactions are relatively unlikely for black customers (statistical discrimination).
Resumo:
The antenna presented in this article will be developed for satellite communications onboard systems based on the recommendations ITU-R S.580-6 and ITU-R S.465-5. The antenna consists of printed elements grouped in an array, this terminal works in a frequency band from 7.25 up to 8.4 GHz (14.7% of bandwidth), where both bands, reception (7.25 - 7.75 GHz) and transmission (7.9 - 8.4 GHz), are included simultaneously. The antenna reaches a gain about 31 dBi, and it has a radiation pattern with a beamwidth smaller than 10° and a dual circular polarization. The antenna has the capability to steer in elevation from 90° to 40° electronically and 360° in azimuth with a motorized junction.
Resumo:
This work provides the development of an antenna for satellite communications onboard systems based on the recommendations ITU-R S.580-6 [1] and ITU-R S.465-5 [2]. The antenna consists of printed elements grouped in an array, working in a frequency band from 7.25 up to 8.4 GHz (15% of bandwidth). In this working band, transmission and reception are included simultaneously. The antenna reaches a gain about 31 dBi, has a radiation pattern with a beam width smaller than 10oand dual circular polarization. It has the capability to steer in elevation through a Butler matrix to 45
Resumo:
In this work, a dual circular polarized steering antenna for satellite communications in X band is presented. The antenna consists of printed elements grouped in an array. This terminal works in a frequency band from 7.25 GHz up to 8.4 GHz (15% of bandwidth), where both bands, reception (RX) and transmission (TX) are included simultaneously and Left Handed Circular Polarization (LHCP) and Right Handed Circular Polarization (RHCP) are interchangeable. The antenna is compact, narrow bandwidth and reaches a gain of 16 dBi. It has the capability to steer in elevation to 45±, 75±, 105± and 135± electronically with a Butler matrix and 360± in azimuth with a motorized junction.
Resumo:
In this letter, a dual circular polarized steering antenna for satellite communications in X-band is presented. This antenna consists of printed elements grouped in an array, able to work from 7.25 up to 8.4 GHz in both polarizations: left-handed circular polarization (LHCP) and right-handed circular polarization (RHCP). The module antenna is compact, with narrow beamwidth, and reaches a gain of 16 dBi. It has the capability to steer in elevation to and electronically with a Butler matrix. In order to reduce the mutual coupling between adjacent patches, electromagnetic band-gap (EBG) structures are introduced. These EBGs combine double-layer and edge location via in order to reduce the size, without changing the low-permittivity substrate, and therefore maintaining the high radiation efficiency of the antenna.
Resumo:
The arrangement of atoms at the surface of a solid accounts for many of its properties: Hardness, chemical activity, corrosion, etc. are dictated by the precise surface structure. Hence, finding it, has a broad range of technical and industrial applications. The ability to solve this problem opens the possibility of designing by computer materials with properties tailored to specific applications. Since the search space grows exponentially with the number of atoms, its solution cannot be achieved for arbitrarily large structures. Presently, a trial and error procedure is used: an expert proposes an structure as a candidate solution and tries a local optimization procedure on it. The solution relaxes to the local minimum in the attractor basin corresponding to the initial point, that might be the one corresponding to the global minimum or not. This procedure is very time consuming and, for reasonably sized surfaces, can take many iterations and much effort from the expert. Here we report on a visualization environment designed to steer this process in an attempt to solve bigger structures and reduce the time needed. The idea is to use an immersive environment to interact with the computation. It has immediate feedback to assess the quality of the proposed structure in order to let the expert explore the space of candidate solutions. The visualization environment is also able to communicate with the de facto local solver used for this problem. The user is then able to send trial structures to the local minimizer and track its progress as they approach the minimum. This allows for simultaneous testing of candidate structures. The system has also proved very useful as an educational tool for the field.
Resumo:
This paper presents a study of three possible solutions that can be taken into account to control the phase shift between elements in an antenna array. Because commercial digital phase shifters have become a strategic element by U.S. Government, these elements have increased their price. For this reason, it is necessary to adopt some solutions that allow us to deal with the design and construction of antenna arrays.
Resumo:
To bind at an enzyme’s active site, a ligand must diffuse or be transported to the enzyme’s surface, and, if the binding site is buried, the ligand must diffuse through the protein to reach it. Although the driving force for ligand binding is often ascribed to the hydrophobic effect, electrostatic interactions also influence the binding process of both charged and nonpolar ligands. First, electrostatic steering of charged substrates into enzyme active sites is discussed. This is of particular relevance for diffusion-influenced enzymes. By comparing the results of Brownian dynamics simulations and electrostatic potential similarity analysis for triose-phosphate isomerases, superoxide dismutases, and β-lactamases from different species, we identify the conserved features responsible for the electrostatic substrate-steering fields. The conserved potentials are localized at the active sites and are the primary determinants of the bimolecular association rates. Then we focus on a more subtle effect, which we will refer to as “ionic tethering.” We explore, by means of molecular and Brownian dynamics simulations and electrostatic continuum calculations, how salt links can act as tethers between structural elements of an enzyme that undergo conformational change upon substrate binding, and thereby regulate or modulate substrate binding. This is illustrated for the lipase and cytochrome P450 enzymes. Ionic tethering can provide a control mechanism for substrate binding that is sensitive to the electrostatic properties of the enzyme’s surroundings even when the substrate is nonpolar.
Resumo:
This CEPS Special Report analyses the composition of the 20 committees in the new European Parliament and how representative they are of the 28 member states, identifying which policy areas or committees are of particular interest to MEPs from certain countries. It also examines the allocation of committee chairs and party coordinator positions to assess whether the country of origin matters and if so, why. The study reveals that in general the countries’ share of representatives in the committees is very similar in most of the cases to their representation in Parliament. Still, some policy areas have a special relevance for some countries and attract their MEPs in larger numbers. Due to the procedure used in the allocation of the committee chairs, which favours the largest political groups and the largest national parties within them, MEPs from larger member states tend to hold most of these coveted positions. The internal process followed by the political groups in appointing their coordinators in the respective committees is predisposed towards MEPs with seniority, experience and good connections. All in all, the strategic relevance that national parties attach to these positions makes a difference.
Resumo:
How does the non-executant state ensure that its agents are fulfilling their obligations to deliver nationally determined policies? In the case of elected local government in England and Wales, this function is carried out by the Audit Commission (AC) for Local Authorities and the Health Service for England and Wales. Since being established in 1983, it is the means by which local authorities are held to account by central government, both for its own purposes and on behalf of other interested stakeholders. Although the primary function of the AC is to ensure that local authorities are fulfilling their obligations, it does so by using different methods. By acting as a regulator, an independent expert, an opinion former and a mediator, the AC steers local authorities to ensure that they are compliant with the regulatory regime and are implementing legislation properly.
Resumo:
Consultation between the police and the community was a recommendation of Lord Scarman in his report into the Brixton riots in 1981. By 1982 the West Midlands Police Authority had established local consultative committees on each police sub-division. This thesis is a study of four Police Consultative Committees in Birmingham, using qualitative methods of attendance at committee meetings and interviews with committee members. The research was carried out between 1990 and 1992 - ten years after formal consultation was established, and aimed to examine the relationship between the micro social processes of the committees and key sociological theoretical concepts. The analysis of the four committees contextualises them within the social and political parameters of urban policing in the late 1980s. Each committee is taken as a case study to highlight the following aspects of consultation:- relations between the police and black communities; membership, representation and accountability; responding to community conflict; crime prevention agencies and networks of social control. The findings are then generalised to the sociological theoretical concepts of hegemony, legitimation, community conflict and social control. The central proposition of this thesis is that, whilst these committees are not fulfilling the role Lord Scarman envisaged for them (of involving local community representatives in policing strategies and policies), they do have important policing and political roles. It is argued that they offer a platform from which senior police officers can engage local people into supporting policing objectives without actually involving them in determining those objectives. Furthermore, such committees have political symbolism in that they enable the government to be seen to be responding to the issues of accountability and relations between the police and black communities following the urban disorders, without actually devolving any statutory powers to the community.
Resumo:
The Report of the Robens Committee (1972), the Health and Safety at Work Act (1974) and the Safety Representatives and Safety Committees Regulations (1977) provide the framework within which this study of certain aspects of health and safety is carried out. The philosophy of self-regulation is considered and its development is set within an historical and an industrial relations perspective. The research uses a case study approach to examine the effectiveness of self-regulation in health and safety in a public sector organisation. Within this approach, methodological triangulation employs the techniques of interviews, questionnaires, observation and documentary analysis. The work is based in four departments of a Scottish Local Authority and particular attention is given to three of the main 'agents' of self-regulation - safety representatives, supervisors and safety committees and their interactions, strategies and effectiveness. A behavioural approach is taken in considering the attitudes, values, motives and interactions of safety representatives and management. Major internal and external factors, which interact and which influence the effectiveness of joint self-regulation of health and safety, are identified. It is emphasised that an organisation cannot be studied without consideration of the context within which it operates both locally and in the wider environment. One of these factors, organisational structure, is described as bureaucratic and the model of a Representative Bureaucracy described by Gouldner (1954) is compared with findings from the present study. An attempt is made to ascertain how closely the Local Authority fits Gouldner's model. This research contributes both to knowledge and to theory in the subject area by providing an in-depth study of self-regulation in a public sector organisation, which when compared with such studies as those of Beaumont (1980, 1981, 1982) highlights some of the differences between the public and private sectors. Both empirical data and hypothetical models are used to provide description and explanation of the operation of the health and safety system in the Local Authority. As data were collected during a dynamic period in economic, political and social terms, the research discusses some of the effects of the current economic recession upon safety organisation.