Repercusión económica de la certificación medioambiental ISO 14001

Este trabajo ha sido realizado bajo el marco de objetivos del Grupo de Investigación de Excelencia CREVALOR reconocido por la Diputación General de Aragón.

Análisis de las necesidades del cliente y su satisfacción en la industria del mueble según las normas ISO 9000: un estudio de casos

[ES] La necesidad de determinar los requerimientos del cliente y satisfacerlos se ha convertido en el principal objetivo de las empresas. Gestionar esa actividad, comúnmente asociada al departamento de marketing, ha llegado a ser el fin de cualquier sistema de calidad, y por ende, del resto de departamentos de la organización. A través de un estudio de casos, este trabajo pretende identificar cuales son las prácticas de marketing habituales en la industria del mueble, y plantear un marco de actuación idóneo de acuerdo con los procedimientos establecidos en las normas de calidad ISO 9000:2000.

Implantación de la normativa ISO 9000 en las Comunidades Autónomas de Cataluña y el País Vasco: conclusiones de dos estudios empíricos

Durante los últimos años se ha podido observar cómo, con cada vez mayor claridad, ha fraguado en el ámbito empresarial y académico, una nueva cultura, movimiento o paradigma de la calidad, que ha llegado incluso a popularizarse en exceso. Uno de los pilares fundamentales de este moderno paradigma de la calidad lo ha constituido el Total Quality Management. Asimismo, esta nueva cultura de la calidad, se ha venido asociando, muy amenudo, a las siglas de la conocida normativa de Aseguramiento de la Calidad ISO 9000.

Regulación empresarial voluntaria y medio ambiente : análisis de la adopción de ISO 14001 en las organizaciones de la CAPV

578 p.

Iso-specific Ziegler-Natta polymerization of α-olefins with a single-component organoyttrium catalyst

The synthesis of a sterically tailored ligand array (M)_2((C_5H_2-2-Si(CH_3)_3-4-C(CH_3)_3)S_2i(CH_3)_2]("M_2Bp") (M = Li, 16; K, 19) is described. Transmetallation of Li_2Bp with YCl_3(THF)_3 affords exclusively the C_2 symmetric product rac-[BpY(µ_2-Cl)_2Li(THF)_2], 20. A X-ray crystal structure of 20 has been determined; triclinic, P1, a= 13.110 (8), b = 17.163 (15), c = 20.623 (14) Å, α = 104.02 (7), β = 99.38 (5), γ = 100.24 (6)° , Z = 4, R = 0.056. Transmetallation of K_2Bp with YCl_3(THF)_3 affords the halide free complex rac-BpYCl, 23. The corresponding rac-BpLaCl, 28, is prepared in an anlogous manner. In all cases the achiral meso isomer is not obtained since only for the racemic isomers are the unfavorable steric interactions between the Si(CH3)_3 groups in the narrow portion of the [Cp-M'-Cp] wedge avoided. Alkylation of 20 or 23 with LiCH(Si(CH_3)_3)_2 affords rac-BpYCH(Si(CH_3)_3)_2, 26 in good yield. Alkylation of 28 with LiCH(Si(CH_3)_3)_2 affords rac-BpLaCH(Si(CH_3)_3)_2 29. Hydrogenation of 26 cleanly affords the bridging hydride species [BpY(µ_2-H)]_2, 27, as the homochiral (R,R) and (S,S) dimeric pairs. 26 is an efficient initiator for the polymerization of ethylene to high molecular weight linear polyethylene. 27 catalyzes the polymerization of propylene (25% v/v in methylcyclohexane) and neat samples of 1-butene, 1-pentene, 1-hexene to moderately high molecular weight polymers: polypropylene (M_n = 4,200, PDI 2.32, T_m 157 °C); poly-1-butene (M_n = 8,500, PDI 3.44, T_m 105 °C); poly-1-pentene (M_n = 20,000, PDI 1.99, T_m 73 °C); poly-1-hexene (M_n = 24,000, PDI 1.75, T_m < 25 °C). ^(13)C NMR spectra at the pentad analysis level indicates that the degree of isotacticity is 99% mmmm for all polymer samples. 27 is the first single component iso-specific α-olefin polymerization catalyst. The presumed origins of the high isospecificity are presented.

Effects of sensing temperature on the NO2-sensing properties of octa-iso-pentyloxymetallonaphthalocyanine spin-coated films

A kind of 1,6,10,15,19,24,28,33-octa-iso-pentyloxy-2,3-metallonaphthalocyanines complexes MNc(iso-PeO)(8) (M = Co, Cu, Pd) are used as spincoating film-forming materials. The surface morphologies of the films prepared were studied first. These films were then used for the experiments of NO2 sensing. The effects of sensing temperature as well as the NO concentration on the sensing properties were studied. The experimental results showed that the three MNc(iso-PeO)(8) films were uniform, smooth and dense. Due to the different metal ions (M) on the center of naphthalocyanine, the CoNc(iso-PeO)(8) film had a higher film resistance and response-recovery rate in the NO2 sensing experiments. On the contrary, the response to NO2 of the PdNc(iso-PeO)(8) and CuNc(iso-PeO)(8) films were superior to that of CoNc(iso-PeO)(8). By varying the sensing temperature, it was found that the elevation of sensing temperature could improve the sensing response, recovery ratio, and sensitivity of the sensing films. At high concentrations of NO2, the response time became shorter. (c) 2007 Elsevier B.V. All rights reserved.

Preparation, characterization and gas sensing properties of nickel octa-iso-pentyloxynaphthalocyanine spin-coating films

Spin-coated films of nickel 1,6,10,15,19,24,28,33-octa-iso-pentyloxy-2,3-naphthalocyanine complex were obtained and characterized by UV-vis absorption spectroscopy. A linear relationship between the absorbance and solution concentration was observed. Low concentration solutions could afford smooth and homogeneous film surfaces as indicated by atomic force microscopy. The film structure was studied by small angle X-ray diffraction. The films were used for NO2 sensing experiments. The results indicate that the elevation of sensing temperature can shorten the response time and increase recovery ratio and response magnitude of the sensing films. High NO2 concentration can also shorten response time. (C) 2008 Elsevier B.V. All rights reserved.

Cultura de microalgas marinhas Isochrysis galbana , Green (variedade T. Iso) e Tetraselmis suecica (Kilin) Butch

The experimental cultures of the marine microalgae Isochrysis galbana Green (variety T. Iso) and Tetraselmis suecica (Kylin) Butch for feeding mussel larvae are described in detail.

Avaliações técnico-operacionais em estações de tratamento de água dos municípios das regiões leste e dos lagos do Estado do Rio de Janeiro, com propostas de melhorias para futura implantação de sistema de gestão ambiental baseado nas normas ISO 14.000.

Na gestão de recursos hídricos, as questões relacionadas aos impactos ambientais causados pelas Estações de Tratamento de Água não podem ser negligenciadas, devendo ser avaliadas em todos seus aspectos. Neste trabalho foram avaliadas as condições técnicasoperacionais e a gestão de seis Estações de Tratamento de Água de pequeno porte situadas nas regiões leste e dos lagos do estado do Rio de Janeiro. Os resultados apresentam dados de produção de água tratada, perdas de água contabilizadas com lavagem de filtros e descargas de decantadores e as não contabilizadas, gastos de energia e produtos químicos, produção de resíduos e seu destino final, bem como levantamento da capacitação do pessoal de operação, comparados com valores de literatura para ETAs consideradas eficientes. A partir da discussão dos resultados concluiu-se que há necessidade de correções de operação e manutenção das ETAs e monitoramento da qualidade das águas bruta e tratada, recomendando-se que a empresa de saneamento, efetivamente, implante melhorias para uma posterior implantação, em cada unidade, de um sistema de gestão ambiental, baseado nas normas ISO 14.000.

Effects of iso-nitrogenous fertilizers as nutrient sources on carp polyculture in Bangladesh

A 120-day long experiment was conducted to find out the effects of urea plus triple super phosphate (UT), cow manure (CM) and poultry manure (PM) having iso-nil:rogen content on pond productivity and fish yield. Three fertilizer treatments, with three replicates each, were randomly assigned into nine earthen ponds of 100 m2 each. The stocking fish were rohu (Labeo ruhita), catla ( Catla catla) and mrigal ( Cirrhinus mrigala) in each treatment pond at the rate of 10000/ha with the ratio of 1:1:1. All ponds were fertilized fortnightly at the rate of 125 kg/ha urea plus 100 kg TSP/ha, 7000 kg/ha cow manure and 3500 kg/ha poultry manure for the treatment of UT, CM and PM, respectively, having an iso-nitrogen content of 56 kg in each. Though the physicochemical water quality parameters were more or less similar in all treatment ponds, the chlorophyll-a content and abundance of total plankton were significantly higher (P < 0.05) in the ponds receiving the treatment PM. Final growth as well as per unit production of fish was significantly higher (p

Effects of iso-nitrogenous and iso-phosphorus fertilizers as nutrient sources on carp polyculture in Bangladesh

A 120 day long experiment was conducted to find out the effects of cow manure with urea and triple super phosphate (CUT), poultry manure with urea and triple super phosphate (PUT) and cow manure with poultry manure (CP) having similar quantities of nitrogen and phosphorus on pond productivity and fish yield. The stocking fish were rohu (Labeo rohita), catla ( Catla catla) and mrigal ( Cirrhinus mrigala) in each treatment pond at the rate of 10000/ha. All ponds were fertilized fortnightly at the rate of 4000 kg/ha cow manure with 62 kg/ha urea and 65 kg/ha TSP, 2700 kg/ha poultry manure with 62 kg/ha urea and 16 kg/ha TSP, and 4000kg/ha cow manure with 2700 kg/ha poultry manure for the treatment CUT, PUT and CP respectively. Each treatment contained an iso-nitrogen and iso-phosphorus of 56 kg and 46 kg respectively. Though the physico-chemical parameters were more or less similar in all ponds, the chlorophyll-a content and abundance of total plankton were significantly higher (P< 0.05) in the ponds receiving the fertilizer treatment of PUT than those of other treatments. Final growth as well as per unit production of fish of treatment PUT (1773 kg/ha) was significantly higher (P< 0.05) than that of treatment CP (1528 kg/ha) followed by that of treatment CUT (1336 kg/ha). The over all results showed that poultry manure with urea and triple super phosphate proved to be superior to cow manure with urea and triple super phosphate, and poultry manure with cow manure, even when nitrogen and phosphorus content was similar, in carp polyculture system under prevailing conditions.