X-ray crystal structure and molecular mechanics calculations of (2,6-iso-dipropyl-phenylamide) dimethyl (tetra-methylcyclopenta-dienyl) silane titanium dichloride

Crystal and molecular structure of (2.6-dipropylphenylamide) dimethyl (tetra-methyl cyclopentadienyl) silane titanium dichloride (I) was fully characterized by X-ray diffraction. The crystal is obtained from a mixture of ether/hexane as orthorhombic. with a = 12.658 (3) Angstrom. b = 16.62 (3) Angstrom. c = 11.760 (2) Angstrom. V = 2474.2 (9) Angstrom(3). Z = 4, space group Pnma. R = 0.0399; Componud I compose of the pi-bounded ring with its dimethylsilyl-dipropyl phenyl amido group and the two terminal chloride atoms coordinated to central metal to form a so-called constrained geometry catalyst (CGC) structure. The result of molecular mechanics (MM) calculations on compound I shows that bond lengths and bond angles from the MM calculation are comparable to the data obtained from the X-ray diffraction study. The relation of the structure of CGCs and their catalytic activity by MM calculations is also discussed.

THE EFFECT OF MOBILITY OF MOLECULES ON RADIATION-INDUCED CHAIN SCISSION AND RACEMIZATION OF ISO-POLY(METHYL METHACRYLATE)

The radiation-induced chain-scission and racemization of isotactic poly(methylmethacrylate)(iso-PMMA) in amorphous and semi-crystalline state as well as in solution have been studied with nuclear magnetic resonance and molar mass deter-mination. It is shown that the chain-scission is dominant for iso-PMMA in dilute solution while the racemization reaction is not favorable in this case. On the contrary, the racemization is favorable when iso-PMMA was irradiated in its crystalline state while chain-scission is not. Such experimental results could be well explained by the mobility of molecules and "cage effect". The hypothesis, we proposed previously that the chain-scission, racemization and recombination are in competition and the final result depends on the state of molecular motion at which iso-PMMA was irradiated, has been verified verified once again.

分子活动性对iso-PMMA辐射裂解和消旋的影响

以全同立构聚甲基丙烯酸甲酯(iso-PMMA)为对象,用核磁共振谱和分子量测定等手段,研究了不同物理状态,即无定型固态,结晶态和稀溶液状态下的辐射裂解和辐射消旋反应.结果表明,在稀溶液状态下辐照,其裂解反应最强,而消旋反应最弱;结晶状态下辐照,则裂解反应最弱而消旋反应最强.这充分说明了分子的活动性对反应的影响,进一步验证了前已提出的高分子链断裂-重合-消旋的平衡反应机理.

Acreditação de ensaios do Laboratório de Análise de Sementes da Embrapa Milho e Sorgo pela ISO/IEC 17025:2005 e obtenção do Renasem.

2009

Impacto da certificação NP EN ISO 9001 na satisfação dos clientes

Dissertação apresentada à Universidade Fernando Pessoa como parte dos requisitos para a obtenção do grau de Mestre em Gestão da Qualidade

ISO-SWS observations of CO2 and H2O in R cassiopeiae

We present ISO-SWS spectra of the O-rich Mira variable R Gas, showing CO2 in absorption and emission, and H2O in absorption. The CO2 absorption feature is the 01(1)0 - 00(0)0 ro-vibrationaI band at 14.97 mu m. The emission features are the 10(0)0-01(1)0 and 11(1)0 - 02(2)0 re-vibrational transitions at 13.87 and 13.48 mu m respectively. The water absorption spectrum shows the nu(1) and nu(3) re-vibrational bands in the 2.75 - 3 mu m region. Using LTE models, we derive physical parameters for the features. We find the CO2 emission temperature to be similar to 1100 K. We discuss the nature of the CO2 feature at 15 mu m and show that it can be modeled as an emission/absorption band by deviating front thermal equilibrium for the population of the 01(1)0 vibrational level. The H2O absorption spectrum is shown to arise from gas at different temperatures, but can be fit reasonably well with two components at T = 950 K and T = 250 K. The CO2 emission and hut H2O absorption temperatures an similar, suggesting chat these features probe the same region of the inner envelope. We discuss the inner envelope chemistry using molecular equilibrium calculations and recent modeling work by Duari et al. (1999), and find our observations consistent with the results.

EMAS and ISO 14001 in the German industry – complements or substitutes?

The two environmental management system (EMS) standards EMAS and ISO 14001 have been available in Europe for the last 15 years. ISO 14001 has been taken up at a much larger scale but many firms in the German automotive and engineering industry have certified their EMSs according to both standards. Two research questions are addressed: (i) What explains why companies adopt both EMAS and ISO 14001? (ii) Are EMAS and ISO 14001 complements or substitutes? Based on 21 interviews with industrial and institutional representatives, this study finds that, first, the two standards are adopted for completely different reasons: while ISO 14001 is often done as a response to external pressure, EMAS tends to be motivated internally. Second, it is argued that EMAS and ISO 14001 are likely in a situation of direct competition at present which may well turn into complementarity in the future.

Hardware Comparison of the ISO/IEC 29192-2 Block Ciphers

As ubiquitous computing becomes a reality, sensitive information is increasingly processed and transmitted by smart cards, mobile devices and various types of embedded systems. This has led to the requirement of a new class of lightweight cryptographic algorithm to ensure security in these resource constrained environments. The International Organization for Standardization (ISO) has recently standardised two low-cost block ciphers for this purpose, Clefia and Present. In this paper we provide the first comprehensive hardware architecture comparison between these ciphers, as well as a comparison with the current National Institute of Standards and Technology (NIST) standard, the Advanced Encryption Standard.

Partial purification of lymphokine activities by iso-electric focusing

A continuous cell-line has been shown to be adaptable to preparation of supernatants containing lymphokine activities. Separation and partial purification of migration inhibiting, colony stimulating and interferon activities from such preparations has been achieved by the use of density gradient iso-electric focusing.

Evaluating Asymmetric Multicore Systems-on-Chip using Iso-Metrics

The end of Dennard scaling has pushed power consumption into a first order concern for current systems, on par with performance. As a result, near-threshold voltage computing (NTVC) has been proposed as a potential means to tackle the limited cooling capacity of CMOS technology. Hardware operating in NTV consumes significantly less power, at the cost of lower frequency, and thus reduced performance, as well as increased error rates. In this paper, we investigate if a low-power systems-on-chip, consisting of ARM's asymmetric big.LITTLE technology, can be an alternative to conventional high performance multicore processors in terms of power/energy in an unreliable scenario. For our study, we use the Conjugate Gradient solver, an algorithm representative of the computations performed by a large range of scientific and engineering codes.

Overview of the current ISO tests for photocatalytic materials

The current eight published ISO standards associated with semiconductor photocatalysis are considered. These standards cover: (1) air purification (specifically, the removal of NO, acetaldehyde and toluene), (2) water purification (the photobleaching of methylene blue and oxidation of DMSO) (3) self-cleaning surfaces (the removal of oleic acid and subsequent change in water droplet contact angle), (4) photosterilisation (specifically probing the antibacterial action of semiconductor photocatalyst films) and (5) UV light sources for semiconductor photocatalytic ISO work. For each standard, the background is first considered, followed by a brief discussion of the standard particulars and concluding in a discussion of the pros and cons of the standard, with often recommendations for their improvement. Other possible standards for the future which would either compliment or enhance the current ones are discussed briefly. 

Iso-Quality of Service: Fairly Ranking Servers for Real-Time Data Analytics

We present a mathematically rigorous Quality-of-Service (QoS) metric which relates the achievable quality of service metric (QoS) for a real-time analytics service to the server energy cost of offering the service. Using a new iso-QoS evaluation methodology, we scale server resources to meet QoS targets and directly rank the servers in terms of their energy-efficiency and by extension cost of ownership. Our metric and method are platform-independent and enable fair comparison of datacenter compute servers with significant architectural diversity, including micro-servers. We deploy our metric and methodology to compare three servers running financial option pricing workloads on real-life market data. We find that server ranking is sensitive to data inputs and desired QoS level and that although scale-out micro-servers can be up to two times more energy-efficient than conventional heavyweight servers for the same target QoS, they are still six times less energy efficient than high-performance computational accelerators.

The nitric oxide ISO photocatalytic reactor system: Measurement of NOx removal activity and capacity

Although the NO removal-based air-purification ISO method ISO 22197-1:2007 is well established, its preconditioning requirements mean that only the initial activity of the photocatalyst under test is measured owing to the often-reported, gradual alteration of the surface kinetics for NO oxidation by air through the accumulation of surface HNO3. Herein, we compare the photocatalytic NO removal abilities of a number of different, common TiO2 materials, surface-saturated with photogenerated HNO3, with their behaviours observed during the typical 5 h-long ISO standard test. It is found that all the TiO2 materials studied eventually become largely NO to NO2 converters after sufficient exposure to NO under irradiation (>5 h) due to the accumulation of surface HNO3. The UV exposure time, t*, necessary to reach this HNO3 saturated condition is different for each different catalyst. As a consequence, an alternative preconditioning process for the ISO method is proposed which can be used to provide a more realistic measure of the photocatalytic activity of the underlying material and provide a measure of the NOx removing capacity of the photocatalytic material under test.

Evaluating fault tolerance on asymmetric multicore systems-on-chip using iso-metrics

The end of Dennard scaling has promoted low power consumption into a firstorder concern for computing systems. However, conventional power conservation schemes such as voltage and frequency scaling are reaching their limits when used in performance-constrained environments. New technologies are required to break the power wall while sustaining performance on future processors. Low-power embedded processors and near-threshold voltage computing (NTVC) have been proposed as viable solutions to tackle the power wall in future computing systems. Unfortunately, these technologies may also compromise per-core performance and, in the case of NTVC, xreliability. These limitations would make them unsuitable for HPC systems and datacenters. In order to demonstrate that emerging low-power processing technologies can effectively replace conventional technologies, this study relies on ARM’s big.LITTLE processors as both an actual and emulation platform, and state-of-the-art implementations of the CG solver. For NTVC in particular, the paper describes how efficient algorithm-based fault tolerance schemes preserve the power and energy benefits of very low voltage operation.