Ionic liquid adsorption and nanotribology at the silica-oil interface: hundred-fold dilution in oil lubricates as effectively as the pure ionic liquid

The remarkable physical properties of ionic liquids (ILs) make them potentially excellent lubricants. One of the challenges for using ILs as lubricants is their high cost. In this article, atomic force microscopy (AFM) nanotribology measurements reveal that a 1 mol % solution of IL dissolved in an oil lubricates the silica surface as effectively as the pure IL. The adsorption isotherm shows that the IL surface excess need only be approximately half of the saturation value to prevent surface contact and effectively lubricate the sliding surfaces. Using ILs in this way makes them viable for large-scale applications.

High-efficient production of boron nitride nanosheets via an optimized ball milling process for lubrication in oil

Although tailored wet ball milling can be an efficient method to produce a large quantity of two-dimensional nanomaterials, such as boron nitride (BN) nanosheets, milling parameters including milling speed, ball-to-powder ratio, milling ball size and milling agent, are important for optimization of exfoliation efficiency and production yield. In this report, we systematically investigate the effects of different milling parameters on the production of BN nanosheets with benzyl benzoate being used as the milling agent. It is found that small balls of 0.1-0.2 mm in diameter are much more effective in exfoliating BN particles to BN nanosheets. Under the optimum condition, the production yield can be as high as 13.8% and the BN nanosheets are 0.5-1.5 μm in diameter and a few nanometers thick and of relative high crystallinity and chemical purity. The lubrication properties of the BN nanosheets in base oil have also been studied. The tribological tests show that the BN nanosheets can greatly reduce the friction coefficient and wear scar diameter of the base oil.

Fabrication of superhydrophobic surfaces by smoke deposition and application in oil-water separation

 Utilizing the smoke emitted by discarded silicone combustion, a simple method of smoke deposition is presented for fabricating a superhydrophobic surface with outstanding water repellence, which exhibited a water contact angle of 164 ± 0.8° and a sliding angle of lower than 1°. In addition, the as-prepared surface possesses favourable heat, water impact and water immersion stabilities. Oil leakages seriously endanger both the environment and the social economy. By this simple smoke deposition method, a selective-wettability copper mesh has been fabricated to separate oil-water mixtures. The smoke-deposited mesh achieved a high separation efficiency of over 93% for various oils, and showed excellent reusability, maintaining a high separation efficiency over 10 cycles. The water repellence of the used mesh can be refreshed by recoating with silicone and smoke deposition. This work provides a new strategy to utilize discarded silicone to fabricate superhydrophobic surfaces and oil-water separation meshes.

Dissolved radioelements in (oil) water wells in Parana basin, Brazil

This paper describes the results of a study on groundwaters from Tubarao Group at the Parana sedimentary basin, São Paulo State, Brazil. The purpose of this study was to integrate chemical and U-isotopes data in order to evaluate the models for quantifying different relative volumes of mixing waters in a resultant water. Despite it was possible to generate a typical triangle involving U-238 and its daughter U-234, the U-isotopes model failed to interpret the major hydrochemical facies observed in the studied localities.

Ultrasonic characterization of emulsions: milk and water in oil

Measurements of ultrasonic attenuation and velocity in milk and low concentration water-in-oil (W/O) emulsion were conducted, using a measurement cell with a double-element transducer that eliminates diffraction losses. The milk is characterized by the attenuation coefficient, while in the case of water-in-oil emulsions, the characterization is best represented by the propagation velocity.

Selective factors involved in oil flotation isolation of black yeasts from the environment

The oil flotation isolation technique has been successfully applied to recover chaetothyrialean black yeasts and relatives from the environment. The selective mechanisms playing a role in isolation are unknown. The fungi concerned are supposed to occupy specialized microniches in nature, taking advantage of (1) oligotrophism. Mineral oil as a main selective agent may be based on (2) hydrophobicity or on (3) assimilation. All three hypotheses are tested in this paper. Results show that cell wall hydrophobicity is unlikely to be a selective factor. Incubation under poor nutrient conditions provides competitive advantage for black yeasts, especially for Exophiala strains, which are subsequently enriched by mineral oil which enhances growth in this group of fungi. Incubation under mineral media and mineral oil can be used as selective factor.

Simple and direct potentiometric determination of potassium ions in biodiesel microemulsions at a glassy carbon electrode modified with nickel(II) hexacyanoferrate nanoparticles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Magnetic non-destructive evaluation of ruptures of tensile armor in oil risers

Risers are flexible multilayered pipes formed by an inner flexible metal structure surrounded by polymer layers and spiral wound steel ligaments, also known as armor wires. Since these risers are used to link subsea pipelines to floating oil and gas production installations, and their failure could produce catastrophic consequences, some methods have been proposed to monitor the armor integrity. However, until now there is no practical method that allows the automatic non-destructive detection of individual armor wire rupture. In this work we show a method using magnetic Barkhausen noise that has shown high efficiency in the detection of armor wire rupture. The results are examined under the cyclic and static load conditions of the riser. This work also analyzes the theory behind the singular dependence of the magnetic Barkhausen noise on the applied tension in riser armor wires.

Development of a novel autonomous robot for navigation and inspect in oil wells

This paper proposes a novel robotic system that is able to move along the outside of the oil pipelines used in Electric Submersible Pumps (ESP) and Progressive Cavity Pumps (PCP) applications. This novel design, called RETOV, proposes a light weight structure robot that can be equipped with sensors to measure environmental variables avoiding damage in pumps and wells. In this paper, the main considerations and methodology of design and implementation are discussed. Finally, the first experimental results that show RETOV moving in vertical pipelines are analyzed.

Modelling and testing volatility spillovers in oil and financial markets for USA, UK and China

The primary purpose of the paper is to analyze the conditional correlations, conditional covariances, and co-volatility spillovers between international crude oil and associated financial markets. The paper investigates co-volatility spillovers (namely, the delayed effect of a returns shock in one physical or financial asset on the subsequent volatility or co-volatility in another physical or financial asset) between the oil and financial markets. The oil industry has four major regions, namely North Sea, USA, Middle East, and South-East Asia. Associated with these regions are two major financial centers, namely UK and USA. For these reasons, the data to be used are the returns on alternative crude oil markets, returns on crude oil derivatives, specifically futures, and stock index returns in UK and USA. The paper will also analyze the Chinese financial markets, where the data are more recent. The empirical analysis will be based on the diagonal BEKK model, from which the conditional covariances will be used for testing co-volatility spillovers, and policy recommendations. Based on these results, dynamic hedging strategies will be suggested to analyze market fluctuations in crude oil prices and associated financial markets.

Electric Submersible Pumps in Oil Production and Their Efficiency Analysis

The paper describes the structure of electricity consumption of electric submersible pumps. Analyzed the loss of all elements of the pumping unit: the motor, the cable line,transformer, control stations and pump. Discusses how to optimize power consumption of oil production.

Injuries in oil and gas drilling and services.

Chiefly tables.

Technology and labor in oil and gas, extraction and commercial banking.

Mode of access: Internet.