Avaliação do potencial de uso agrícola da fluorita com óxido silício (AgroSiCa), derivado da fabricação de fertilizantes fosfatados

Phosphate fertilizers are critical for crop production in tropical soils, which are known for having high phosphate-fixing capacity and aluminium saturation, as well as low pH and calcium contents. Fluorine is a component of many phosphate rocks used to make phosphate fertilizers, via a process that generates hexafluorosilicic acid (H2SiF6). While many treatment technologies have been proposed for removal of fluorine in industrial facilities, little attention has been given to a process of neutralizing H2SiF6 with calcium oxide aiming to find out an alternative and sustainable use of a by-product with a great potential for beneficial use in tropical agriculture. This study evaluated the effect of a by-product of phosphoric acid production (fluorite with silicon oxide, hereafter called AgroSiCa) in levels of phosphorus (P), calcium (Ca), silicon (Si), aluminum (Al) and fluorine (F) and some others parameters in soils as on growth of soybean and corn. Experiments were conducted in a greenhouse condition at the Federal University of Lavras (UFLA), Lavras, Minas Gerais, using different types of soils in tropical regions and different doses of AgroSiCa. The application of AgroSiCa resulted in a slight increase in soil pH and significant increases in calcium, phosphorus and silicon in the soil solution and the shoots of corn and soybeans. We also found very low levels of fluoride in all soil leachates. A significant reduction of labile aluminum levels found in all soils after the cultivation of corn and soybeans. In sum, AgroSiCa improved soil properties and contributed to better growth of both cultures. In sum, AgroSiCa improved soil properties and contributed to a better growth of both crops. Our results show that reacting H2SiF6 derived from the wet-process phosphoric acid production with calcium oxide leads to a by-product with potential for agricultural use, especially when applied in highly-weathered soils. Besides providing calcium and silicon to plants, the use of such by-product in soils with high phosphate-fixing capacity and high aluminium saturation delivers additional benefits, since fluoride and silicon can play an important role in improving soil conditions due to the formation of less plant-toxic forms of aluminium, as well as upon decreasing phosphate fixation, thus improving root development and making fertilizer-derived phosphate more available for plant growth.

Avaliação do lodo de curtume como fonte de nutrientes para o crescimento inicial de eucalipto

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Alterações nos atributos químicos do solo e comportamento de cultivares de feijão em resposta à calagem superficial em sistema plantio direto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito do uso do solo sobre seus atributos na microrregião de Chapadinha-MA

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Potential and limitations of organic and fair trade cotton for improving livelihoods of smallholders: evidence from Central Asia

Cotton is a leading agricultural non-food commodity associated with soil degradation, water pollution and pesticide poisoning due to high levels of agrochemical inputs. Organic farming is often promoted as a means of addressing the economic, environmental and health risks of conventional cotton production, and it is slowly gaining ground in the global cotton market. Organic and fair trade cotton are widely seen as opportunities for smallholder farmers to improve their livelihoods thanks to higher returns, lower input costs and fewer risks. Despite an increasing number of studies comparing the profitability of organic and non-organic farming systems in developing and industrialized countries, little has been published on organic farming in Central Asia. The aim of this article is to describe the economic performance and perceived social and environmental impacts of organic cotton in southern Kyrgyzstan, drawing on a comparative field study conducted by the author in 2009. In addition to economic and environmental aspects, the study investigated farmers’ motivations toward and assessment of conversion to organic farming. Cotton yields on organic farms were found to be 10% lower, while input costs per unit were 42% lower; as a result, organic farmers’ cotton revenues were 20% higher. Due to lower input costs as well as organic and fair trade price premiums, the average gross margin from organic cotton was 27% higher. In addition to direct economic benefits, organic farmers enjoy other benefits, such as easy access to credit on favorable terms, provision of uncontaminated cottonseed cooking oil and cottonseed cake as animal feed, and marketing support as well as extension and training services provided by newly established organic service providers. The majority of organic farmers perceive improved soil quality, improved health conditions, and positively assess their initial decision to convert to organic farming. The major disadvantage of organic farming is the high manual labor input required. In the study area, where manual farm work is mainly women's work and male labor migration is widespread, women are most affected by this negative aspect of organic farming. Altogether, the results suggest that, despite the inconvenience of a higher workload, the advantages of organic farming outweigh its disadvantages and that conversion to organic farming improves the livelihoods of small-scale farmers.

Biochar and Managed Perennial Ecosystems

Biochar is a carbon-rich material that is similar to charcoal. It is produced when biomass is burned in the absence of oxygen, a process otherwise known as pyrolysis. Pyrolysis and the production of biochar are currently being promoted as a means to both produce domestic fuel (bio-oil) while concurrently producing a co-product that increases crop yield and sequesters carbon in the soil (biochar). While there may be many potential benefits in the application of biochar to agricultural soils, such as enhanced soil fertility and improved soil water status, there are no studies of higher-order ecological and ecosystem effects of biochar and its potential synergistic interactions (either positive or negative) on complex perennial systems. The goal of this field experiment is to determine how biochar and manure addition directly affect ecosystem structure and function in perennial systems, specifically soil nutrients, water, plants, and soil organisms.

Long-term Evaluation of Hybrid, Nitrogen, and Potassium Interactions in Continuous Corn

A long-term experiment was established in 2009 to study continuous corn responses to potassium (K), nitrogen (N), and hybrid rootworm resistance. Previous research suggested a need for this study. A long-term trial conducted until 2001 at the ISU Northern Research Farm showed that the maximum corn yield level and the N rate that maximized yield was higher when K was optimal or greater. In contrast, the relative yield response to N and the N rate that maximized yield were similar for soil-test phosphorus (P) levels ranging from very low to very high. Other studies have shown that rootworm resistance often increases yield compared with untreated susceptible hybrids. Also, that rootworm resistance does not consistently affect the K rate that maximizes yield, but increases K removal because of the higher yield levels. Therefore, this new study evaluates possible interactions between rootworm resistance and N and K fertilization in corn.

Estudio del empleo de cubiertas vegetales temporales para la regulación del régimen hídrico, crecimiento y manejo sostenible del viñedo

RESUMEN El ensayo se llevo a acabo en un viñedo de Syrah durante 8 años y en un viñedo de Merlot durante 3 años. Ambos viñedos regados y situados en Colmenar de Oreja (Madrid) (40º 8’N, 3º 23’W) con clima típicamente Mediterráneo. Siete tratamientos con cubiertas vegetales se han comparado con dos tratamientos con suelo desnudo usados como control. Las cubiertas vegetales fueron seis tratamientos de cereales (Centeno) y un tratamiento de enyerbado autosembrado (Bromus spp) y los tratamientos de suelo desnudo fueron uno manejado con laboreo y otro manejado con herbicida. Los seis tratamientos de centeno se han manejado de seis formas distintas. La primera sembrada todos los años y eliminada en brotación mediante herbicida de post-emergencia. La segunda sembrada todos los años y eliminada un mes después de la brotación mediante siega. La tercera sembrada todos los años y eliminada en floración mediante siega. La cuarta sembrada todos los años y eliminada en brotación mediante herbicida de post-emergencia. La quinta sembrada todos los años y eliminada un mes después de la brotación mediante siega. La sexta sembrada todos los años y eliminada en floración mediante siega. La utilización de cubiertas vegetales ha tenido efectos beneficiosos sobre el contenido en materia orgánica, la compactación y la infiltración del suelo, mejorando las condiciones para el desarrollo de las raíces. Estas mejoras y la escasa competencia de la competencia durante el crecimiento del sistema radical de la vid han producido un incremento del sistema radical en las plantas mantenidos con cubierta vegetal. La competencia de las cubiertas vegetales ha reducido la disponibilidad hídrica de la vid, incrementándose la absorción en zonas con mayor disponibilidad hídrica (como la línea) antes de floración. El mayor desarrollo radical de las vides con cubierta autosembrada ha permitido agotar más intensamente las reservas de agua en el suelo. La competencia de las cubiertas ha reducido en mayor medida el desarrollo vegetativo que el productivo. Lo que ha disminuido, en algunas cubiertas vegetales, el consumo hídrico de la vid, aumentando el potencial hídrico foliar y la fotosíntesis durante la maduración. Sin embargo, el incremento en la fotosíntesis no ha compensado el mayor desarrollo foliar de los tratamientos con suelo desnudo, lo que ha provocado que estos tratamientos presenten la producción de materia seca más elevada. El empleo de cubiertas vegetales ha reducido la producción principalmente limitando el número de bayas por racimo, ya que el aporte de riego ha minimizado los efectos del manejo del suelo sobre el tamaño de baya. La utilización de cubiertas vegetales temporales ha mejorado la iluminación de los racimos, lo que ha producido un aumento de la síntesis de antocianos durante las primeras fases de la maduración, pero un incremento de la degradación de los mismos al final de la maduración. Esto ha provocado que durante la vendimia los tratamientos de suelo desnudo presenten un mayor contenido de antocianos por baya que los tratamientos mantenidos con cubierta temporal. Estos resultados muestran que el efecto del manejo del suelo depende en gran medida de las condiciones del medio, y que sus efectos en climas calidos y secos son muy distintos a los observados en climas frescos y húmedos. ABSTRACT The trial was conducted over a period of 8 years in a Syrah vineyard and over a period of 3 years in a Merlot vineyard. Both vineyards were irrigated and situated near Colmenar de Oreja (Madrid) (40º 8’N, 3º 23’W) a typical Mediterranean climate. Seven Annual cover crops treatments were compared to two bare soil treatments, used as control. Cover crops were six cereals treatments (Rye) and one auto-sowing treatment (Bromus spp) and the treatments of bare soil were one tilled management treatment and another with herbicide treatment. The six Cereal treatments were managed in different manners. First sowing every year and were eliminated in bud breaking with post-emergency herbicide. The second sowing annually and were eliminated one month after bud breaking through harvesting. The third sowing annually and were eliminated in flowering by mowing. The fourth sowing annually and were eliminated with post-emergency herbicide in bud breaking. The fifth sowing annually and were eliminated by mowing one month after bud breaking. . The third sowing annually was eliminated by mowing in flowering. The use of annual cover crop have improved soil organic matter, soil infiltration rate and soil solidity, resulting in a more favourable environment for roots growth. These improvements and low competitive ability during root growing have increases grapevine root density in plant management with cover crop. The Cover crop ability reduced plant available water, increasing root water uptake in the soil with more available water (such us line) before flowering. More growth of grapevine root density with auto-sowed cover crops has allowed using the water under soil more rapidly. The cover crop ability has reduced vegetative growth more than yield. What has been reduced in some vegetative cover crop has been the consumption of water, and increasing the leaf water potential and foliar and photosynthesis during growth activity. Moreover, the increased in photosynthesis activity could not “Compensate” higher leaf growth of treatment of bare soil, where these treatments had resulted in the greatest amount of dry material. The use of cover crops has reduced the crop mainly reducing the fruit set, because the irrigation had reduced the cover crop effect in the berry growth. The use of temporary cover crop increased berry sunlight exposure and skin anthocyanin synthesis during early rippenig, but excessively high temperature increased anthocyanin degradation during last part of ripenning. So, at the vineyard harvest period the treatments with bare soil plant had a more anthocyanin content per grape than the temporary cover crop plant treatments. These results suggest that the effects of soil handling mainly depends on the environmental condition, and their effects in hot and dry climate are so different from the effects in cold and moist climates.

Effects of sheep and horse manure and pine bark amendments on metal distribution and chemical properties of contaminated mine soils.

Mine soils usually contain large levels of heavy metals and poor fertility conditions which limit their reclamation and the application of phyto-remediation technologies. Two organic waste materials (pine bark compost and sheep and horse manure compost), with different pHs and varying degrees of humification and nutrient contents, were applied as amendments to assess their effects on copper (Cu) and zinc (Zn) bioavailability and on fertility conditions of mine soils. Soil samples collected from two abandoned mining areas near Madrid (Spain) were mixed with 0, 30 and 60 t ha?1 of the organic amendments. The concentrations of metals among the different mineral and organic fractions of soil were determined by several extraction procedures to study the metal distribution in the solid phase of the soil affected by the organic amendments. The results showed that the manure amendment increased the soil pH and the cation exchange capacity and enhanced the nutrient levels of these soils. The pine bark amendment decreased the soil pH and did not significantly change the nutrient status of soil. Soil pH, organic matter content and its degree of humification, which were altered by the amendments, were the main factors affecting Cu fractionation. Zn fractionation was mainly affected by soil pH. The addition of manure not only improved soil fertility, but also decreased metal bioavailability resulting in a reduction of metal toxicity. Conversely, pine bark amendment increased metal ioavailability. The use of sheep and horse manure could be a cost-effective practice for the restoration of contaminated mine soils.

Phytostabilization of metals in mine soils using Brassica juncea in combination with organic amendments

Background and aims The high metal bioavailability and the poor conditions of mine soils yield a low plant biomass, limiting the application of phytoremediation techniques. A greenhouse experiment was performed to evaluate the effects of organic amendments on metal stabilization and the potential of Brassica juncea L. for phytostabilization in mine soils. Methods Plants were grown in pots filled with soils collected from two mine sites located in Central Spain mixed with 0, 30 and 60 tha?1 of pine bark compost and horse- and sheep-manure compost. Plant biomass and metal concentrations in roots and shoots were measured. Metal bioavailability was assessed using a rhizosphere-based method (rhizo), which consists of a mixture of low-molecular-weight organic acids to simulate root exudates. Results Manure reduced metal concentrations in shoots (10?50 % reduction of Cu and 40?80 % of Zn in comparison with non-amended soils), bioconcentration factor (10?50 % of Cu and 40?80 % of Zn) and metal bioavailability in soil (40?50 % of Cu and 10?30 % of Zn) due to the high pH and the contribution of organic matter. Manure improved soil fertility and was also able to increase plant biomass (5?20 times in shoots and 3?30 times in roots), which resulted in a greater amount of metals removed from soil and accumulated in roots (increase of 2?7 times of Cu and Zn). Plants grown in pine bark treatments and in non-amended soils showed a limited biomass and high metal concentrations in shoots. Conclusions The addition of manure could be effective for the stabilization of metals and for enhancing the phytostabilization ability of B. juncea in mine soils. In this study, this species resulted to be a potential candidate for phytostabilization in combination with manure, differing from previous results, in which B. juncea had been recognized as a phytoextraction plant.

Diseño basado en técnicas de fiabilidad del tratamiento de mejora del terreno mediante columnas de grava

El proyecto geotécnico de columnas de grava tiene todas las incertidumbres asociadas a un proyecto geotécnico y además hay que considerar las incertidumbres inherentes a la compleja interacción entre el terreno y la columna, la puesta en obra de los materiales y el producto final conseguido. Este hecho es común a otros tratamientos del terreno cuyo objetivo sea, en general, la mejora “profunda”. Como los métodos de fiabilidad (v.gr., FORM, SORM, Monte Carlo, Simulación Direccional) dan respuesta a la incertidumbre de forma mucho más consistente y racional que el coeficiente de seguridad tradicional, ha surgido un interés reciente en la aplicación de técnicas de fiabilidad a la ingeniería geotécnica. Si bien la aplicación concreta al proyecto de técnicas de mejora del terreno no es tan extensa. En esta Tesis se han aplicado las técnicas de fiabilidad a algunos aspectos del proyecto de columnas de grava (estimación de asientos, tiempos de consolidación y aumento de la capacidad portante) con el objetivo de efectuar un análisis racional del proceso de diseño, considerando los efectos que tienen la incertidumbre y la variabilidad en la seguridad del proyecto, es decir, en la probabilidad de fallo. Para alcanzar este objetivo se ha utilizado un método analítico avanzado debido a Castro y Sagaseta (2009), que mejora notablemente la predicción de las variables involucradas en el diseño del tratamiento y su evolución temporal (consolidación). Se ha estudiado el problema del asiento (valor y tiempo de consolidación) en el contexto de la incertidumbre, analizando dos modos de fallo: i) el primer modo representa la situación en la que es posible finalizar la consolidación primaria, parcial o totalmente, del terreno mejorado antes de la ejecución de la estructura final, bien sea por un precarga o porque la carga se pueda aplicar gradualmente sin afectar a la estructura o instalación; y ii) por otra parte, el segundo modo de fallo implica que el terreno mejorado se carga desde el instante inicial con la estructura definitiva o instalación y se comprueba que el asiento final (transcurrida la consolidación primaria) sea lo suficientemente pequeño para que pueda considerarse admisible. Para trabajar con valores realistas de los parámetros geotécnicos, los datos se han obtenido de un terreno real mejorado con columnas de grava, consiguiendo, de esta forma, un análisis de fiabilidad más riguroso. La conclusión más importante, obtenida del análisis de este caso particular, es la necesidad de precargar el terreno mejorado con columnas de grava para conseguir que el asiento ocurra de forma anticipada antes de la aplicación de la carga correspondiente a la estructura definitiva. De otra forma la probabilidad de fallo es muy alta, incluso cuando el margen de seguridad determinista pudiera ser suficiente. En lo que respecta a la capacidad portante de las columnas, existen un buen número de métodos de cálculo y de ensayos de carga (tanto de campo como de laboratorio) que dan predicciones dispares del valor de la capacidad última de las columnas de grava. En las mallas indefinidas de columnas, los resultados del análisis de fiabilidad han confirmado las consideraciones teóricas y experimentales existentes relativas a que no se produce fallo por estabilidad, obteniéndose una probabilidad de fallo prácticamente nula para este modo de fallo. Sin embargo, cuando se analiza, en el contexto de la incertidumbre, la capacidad portante de pequeños grupos de columnas bajo zapatas se ha obtenido, para un caso con unos parámetros geotécnicos típicos, que la probabilidad de fallo es bastante alta, por encima de los umbrales normalmente admitidos para Estados Límite Últimos. Por último, el trabajo de recopilación sobre los métodos de cálculo y de ensayos de carga sobre la columna aislada ha permitido generar una base de datos suficientemente amplia como para abordar una actualización bayesiana de los métodos de cálculo de la columna de grava aislada. El marco bayesiano de actualización ha resultado de utilidad en la mejora de las predicciones de la capacidad última de carga de la columna, permitiendo “actualizar” los parámetros del modelo de cálculo a medida que se dispongan de ensayos de carga adicionales para un proyecto específico. Constituye una herramienta valiosa para la toma de decisiones en condiciones de incertidumbre ya que permite comparar el coste de los ensayos adicionales con el coste de una posible rotura y , en consecuencia, decidir si es procedente efectuar dichos ensayos. The geotechnical design of stone columns has all the uncertainties associated with a geotechnical project and those inherent to the complex interaction between the soil and the column, the installation of the materials and the characteristics of the final (as built) column must be considered. This is common to other soil treatments aimed, in general, to “deep” soil improvement. Since reliability methods (eg, FORM, SORM, Monte Carlo, Directional Simulation) deals with uncertainty in a much more consistent and rational way than the traditional safety factor, recent interest has arisen in the application of reliability techniques to geotechnical engineering. But the specific application of these techniques to soil improvement projects is not as extensive. In this thesis reliability techniques have been applied to some aspects of stone columns design (estimated settlements, consolidation times and increased bearing capacity) to make a rational analysis of the design process, considering the effects of uncertainty and variability on the safety of the project, i.e., on the probability of failure. To achieve this goal an advanced analytical method due to Castro and Sagaseta (2009), that significantly improves the prediction of the variables involved in the design of treatment and its temporal evolution (consolidation), has been employed. This thesis studies the problem of stone column settlement (amount and speed) in the context of uncertainty, analyzing two failure modes: i) the first mode represents the situation in which it is possible to cause primary consolidation, partial or total, of the improved ground prior to implementation of the final structure, either by a pre-load or because the load can be applied gradually or programmed without affecting the structure or installation; and ii) on the other hand, the second mode implies that the improved ground is loaded from the initial instant with the final structure or installation, expecting that the final settlement (elapsed primary consolidation) is small enough to be allowable. To work with realistic values of geotechnical parameters, data were obtained from a real soil improved with stone columns, hence producing a more rigorous reliability analysis. The most important conclusion obtained from the analysis of this particular case is the need to preload the stone columns-improved soil to make the settlement to occur before the application of the load corresponding to the final structure. Otherwise the probability of failure is very high, even when the deterministic safety margin would be sufficient. With respect to the bearing capacity of the columns, there are numerous methods of calculation and load tests (both for the field and the laboratory) giving different predictions of the ultimate capacity of stone columns. For indefinite columns grids, the results of reliability analysis confirmed the existing theoretical and experimental considerations that no failure occurs due to the stability failure mode, therefore resulting in a negligible probability of failure. However, when analyzed in the context of uncertainty (for a case with typical geotechnical parameters), results show that the probability of failure due to the bearing capacity failure mode of a group of columns is quite high, above thresholds usually admitted for Ultimate Limit States. Finally, the review of calculation methods and load tests results for isolated columns, has generated a large enough database, that allowed a subsequent Bayesian updating of the methods for calculating the bearing capacity of isolated stone columns. The Bayesian updating framework has been useful to improve the predictions of the ultimate load capacity of the column, allowing to "update" the parameters of the calculation model as additional load tests become available for a specific project. Moreover, it is a valuable tool for decision making under uncertainty since it is possible to compare the cost of further testing to the cost of a possible failure and therefore to decide whether it is appropriate to perform such tests.

Structure repair of a compacted vertisol with wet-dry cycles and crops

We hypothesized that the four rotation crops: wheat (Triticum aestivum L.), sorghum [Sorghum bicolor (L.) Merr.], lablab [Lablab purpureus (L.) Sweet] and mung bean [ Vigna radiata (L.) R. Wilczek] differ in their ability to repair soil structure. The study was conducted on a Typic Haplustert, Queensland, Australia, locally termed a Black Earth and considered a prime cropping soil. Large (0.5-m depth by 0.3-m diam.) soil cores, collected from compacted wheel furrows in an irrigated cotton (Gossypium hirsutum L.) field, were subjected to three, six, or nine wet-dry cycles that simulated local flood irrigation practices. After each cycle, soil profiles were sampled for clod bulk density, image analysis of soil structure, and evapotranspiration. Generally, all crops improved soil structure over the initial field condition but lablab and mung bean gave improvements to greater depths and more rapidly than wheat and sorghum. Mung bean and lablab caused up to a threefold increase in clod porosity in the 0.1- to 0.4-m soil layer after only three wet-dry cycles, whereas sorghum required nine wet-dry cycles to increase clod porosity in only the 0.2- to 0.3-m layer, and wheat gave no improvement even after nine wet-dry cycles. Image analysis of soil structure showed that lablab and mung bean rapidly (by three wet-dry cycles) produced smaller peds with more interconnected pore space than wheat and sorghum. By nine wet-dry cycles, sorghum achieved deep cracking of the soil but the material between the cracks remained large and dense. Evapotranspiration was double under lablab and mung bean compared with wheat and sorghum. Our results indicate greater cycles of wetting and drying under lablab and mung bean than wheat and sorghum that have led to rapid repair of soil compaction.

Application of Naïve Bayesian sequential analysis to primary care optometry

The objective of this study was to investigate the effects of circularity, comorbidity, prevalence and presentation variation on the accuracy of differential diagnoses made in optometric primary care using a modified form of naïve Bayesian sequential analysis. No such investigation has ever been reported before. Data were collected for 1422 cases seen over one year. Positive test outcomes were recorded for case history (ethnicity, age, symptoms and ocular and medical history) and clinical signs in relation to each diagnosis. For this reason only positive likelihood ratios were used for this modified form of Bayesian analysis that was carried out with Laplacian correction and Chi-square filtration. Accuracy was expressed as the percentage of cases for which the diagnoses made by the clinician appeared at the top of a list generated by Bayesian analysis. Preliminary analyses were carried out on 10 diagnoses and 15 test outcomes. Accuracy of 100% was achieved in the absence of presentation variation but dropped by 6% when variation existed. Circularity artificially elevated accuracy by 0.5%. Surprisingly, removal of Chi-square filtering increased accuracy by 0.4%. Decision tree analysis showed that accuracy was influenced primarily by prevalence followed by presentation variation and comorbidity. Analysis of 35 diagnoses and 105 test outcomes followed. This explored the use of positive likelihood ratios, derived from the case history, to recommend signs to look for. Accuracy of 72% was achieved when all clinical signs were entered. The drop in accuracy, compared to the preliminary analysis, was attributed to the fact that some diagnoses lacked strong diagnostic signs; the accuracy increased by 1% when only recommended signs were entered. Chi-square filtering improved recommended test selection. Decision tree analysis showed that accuracy again influenced primarily by prevalence, followed by comorbidity and presentation variation. Future work will explore the use of likelihood ratios based on positive and negative test findings prior to considering naïve Bayesian analysis as a form of artificial intelligence in optometric practice.

RELATIONSHIP BETWEEN PHYSICAL AND CHEMICAL PROPERTIES OF STRAIGHT AND RECOVERED ASPHALT BINDERS FROM ONTARIO

Thermal and fatigue cracking are the major pavement distresses that contribute to a drastic reduction of the pavement’s service life and performance in Ontario. Chemical oxidation and hardening of asphalt binders deteriorates its physical properties since physical properties of asphalts depend on its chemical composition. This thesis is aimed to establish a relationship between physical and chemical properties of asphalt binders. A secondary objective is to show the strong correlation between CTOD and temperature. All recovered and straight Ministry of Transportation of Ontario (MTO) samples were investigated using conventional Superpave® test method dynamic shear rheometer (DSR) as well as improved MTO test methods such as extended bending beam rheometer (eBBR) and double-edge-notched tension (DENT) test. DENT test was conducted for all Ontario contract samples at three different temperatures based on their performance grade after three hours of thermal conditioning and compared the results in terms of essential work of fracture, plastic work of fracture and CTOD at different temperatures. Good correlation exists between CTOD and temperature according to the DENT data. X-ray fluorescence (XRF) analysis was conducted to detect the presence of heavy metals such as zinc and molybdenum believed to have originated from waste engine oil. Fourier transform infra-red spectroscopy (FTIR) was performed to determine the abundance of functional groups such as carbonyl, sulfoxides, polyisobutylene, etc. XRF and FTIR analysis confirmed that most of the samples contain waste engine oil and/or oxidized residues, which is believed to be a root cause of premature pavement failures.

Tipos de adubação para a videira 'BRS - violeta' cultivada em latossolo vermelho no sudoeste do Paraná

The vineyard culture, in the Southwest of Paraná, has faced an evolution in recently years. However, some technical barriers has contained the expression of its full potential. Among which, the lack of scientific and technical support about the fertilization management and the fertility maintenance of production fields, is the most worrying. This fact, allied with the raising on the consumers demand for ecological correct products, are the motivations for the present study, whose main objective was to evaluate the effects of different fertilizer formulations, based on alternative nutrient sources, on grapevine yield and grape fruit quality, aiming at the improvement of those parameters and the maintenance of soil fertility. To achieve this goal, an experiment has been evaluated since 2008, at the experimental area of the Federal Technological University of Paraná, Campus Pato Branco, where ten treatments were being tested, combining or isolating shale derivates from other alternative nutrient sources. Those are the treatments: T1: Gafsa Rock Phosphate (GRP) + K2SO4; T2: GRP + RPB (Rock Powder Bioland®); T3: GRP + K2SO4 + LH (Laying Hen Litter); T4: GRP+ RPB + LH; T5: GRP + K2SO4 + MBR (Matrix Shale 3); T6: GRP + RPB + MBR; T7: GRP + K2SO4 + MBR + LH; T8: GRP + RPB + LH + MBR; T9: TSP (Triple Superphosphate) + Urea + KCl and T10: absolute control. The usage of fertilization, specially the alternative fertilization, improved soil fertility characteristics and also the yield on the last two evaluated harvests. The potassium sulfate improved the potassium availability on soil, while improved yield on the last three harvests. The MBR improved the phosphorus availability, improved post-harvest conservation and improved the yield on the last evaluated harvest.