Dietary Phytase: an ideal approach for a cost effective and low-polluting aquafeed

Global fishmeal production from wild-catch sources cannot continue to increase indefinitely; suitable alternatives have to be found for sustainable aquaculture. Plant-based aquafeed seems to be the ideal alternative to this, but has its own limitations. Plant ingredients are rich in phytic acid, which reduces the bioavailability of nutrients like minerals and protein to the fish, thereby causing aquaculture pollution. Dietary phytase treatment reduces the aquaculture pollution by improving the bioavailability of nutrients, and reduces the feed cost as evident from poultry and piggery. Phytase activity is highly dependent upon the pH of the gut. Unlike mammals, fish are either gastric or agastric, and hence, the action of dietary phytase varies from species to species. In this article, the authors attempt to summarise various effects of phytase on nutrient utilization, growth of fish and aquatic pollution.

Compreendendo a utopia realizável: uma defesa do ideal de justiça distributiva da teoria de John Rawls

O trabalho tem por objetivo articular uma defesa da teoria de justiça distributiva de John Rawls, considerando-se, para tal, as mudanças que o autor efetuou em sua teoria de justiça como equidade. Assim, a pesquisa tomará como base não somente o critério de justiça distributiva que se consolidou em Uma Teoria de Justiça, através do princípio da diferença, mas também avaliará de que forma este ideal continua presente nos textos posteriores do autor: O Liberalismo Político e O Direito dos Povos. Para tal, o estudo retomará as críticas cosmopolitas à proposta de internacionalização da teoria de justiça como equidade e, à luz destas, apresentará uma defesa do projeto de Rawls, evidenciando elementos do mesmo que estão alinhados ao projeto de justiça distributiva e sugerindo que sua proposta teórica é coerente com as premissas de Uma Teoria de Justiça, apesar de o princípio da diferença não estar presente entre os princípios fundamentais que devem ser estabelecidos entre os povos. Logo, trata-se também de uma proposta interpretativa que se vincula à compreensão (minoritária) de que as mudanças teóricas efetuadas por Rawls em sua teoria não a tornaram incompatível com seu projeto originário estabelecido em Uma Teoria de Justiça.

Croton tiglium (Linn) seed as an ideal eradicant of pests and predators in fish farms

The toxicity of Croton tiglium seed is very effective in the eradication of most of the aquatic fauna except a few species of hard shelled crustaceans such as crabs and prawns which are resistant to even very high concentrations of it. Its toxicity ranged between 0.4 and 2.2 p.p.m. for different species of fishes. Application of homogenized C. tiglium seed at the rate of 10 kg/ha (0.5 m depth) is found effective for the eradication of aquatic pests and predators of fish farms. While its toxicity lasts for 5-8 days in still water ponds, it is only for 1-3 days in tidal ponds with frequent replenishment of water. This method is thus most useful for the initial preparation of the ponds for pisciculture.

Comparing crowding in human and ideal observers.

A visual target is more difficult to recognize when it is surrounded by other, similar objects. This breakdown in object recognition is known as crowding. Despite a long history of experimental work, computational models of crowding are still sparse. Specifically, few studies have examined crowding using an ideal-observer approach. Here, we compare crowding in ideal observers with crowding in humans. We derived an ideal-observer model for target identification under conditions of position and identity uncertainty. Simulations showed that this model reproduces the hallmark of crowding, namely a critical spacing that scales with viewing eccentricity. To examine how well the model fits quantitatively to human data, we performed three experiments. In Experiments 1 and 2, we measured observers' perceptual uncertainty about stimulus positions and identities, respectively, for a target in isolation. In Experiment 3, observers identified a target that was flanked by two distractors. We found that about half of the errors in Experiment 3 could be accounted for by the perceptual uncertainty measured in Experiments 1 and 2. The remainder of the errors could be accounted for by assuming that uncertainty (i.e., the width of internal noise distribution) about stimulus positions and identities depends on flanker proximity. Our results provide a mathematical restatement of the crowding problem and support the hypothesis that crowding behavior is a sign of optimality rather than a perceptual defect.

Characterization of vertical Mo/diamond Schottky barrier diode from non-ideal I-V and C-V measurements based on MIS model

In this study, we investigated non-ideal characteristics of a diamond Schottky barrier diode with Molybdenum (Mo) Schottky metal fabricated by Microwave Plasma Chemical Vapour Deposition (MPCVD) technique. Extraction from forward bias I-V and reverse bias C- 2-V measurements yields ideality factor of 1.3, Schottky barrier height of 1.872 eV, and on-resistance of 32.63 mö·cm2. The deviation of extracted Schottky barrier height from an ideal value of 2.24 eV (considering Mo workfunction of 4.53 eV) indicates Fermi level pinning at the interface. We attributed such non-ideal behavior to the existence of thin interfacial layer and interface states between metal and diamond which forms Metal-Interfacial layer-Semiconductor (MIS) structure. Oxygen surface treatment during fabrication process might have induced them. From forward bias C-V characteristics, the minimum thickness of the interfacial layer is approximately 0.248 nm. Energy distribution profile of the interface state density is then evaluated from the forward bias I-V characteristics based on the MIS model. The interface state density is found to be uniformly distributed with values around 1013 eV - 1·cm- 2. © 2013 Elsevier B.V.

Investigation of ideal zirconium-doped perovskite-type ceramic membrane materials for oxygen separation

Zirconium-doped perovskite-type membrane materials of BaCo0.4Fe0.6-xZrxO3-delta (x = 0-0.4) with mixed oxygen ion and electron conductivity were synthesized through a method of combining citric and EDTA acid complexes. The results of X-ray diffraction (XRD), oxygen temperature-programmed desorption (O-2-TPD) and hydrogen temperature-programmed reduction (H-2-TPR) showed that the incorporation of proper amount of zirconium into BaCo0.4Fe0.6O3-delta could stabilize the ideal and cubic structure of perovskite. Studies on the oxygen permeability of the as-synthesized membrane disks under air/He gradient indicated that the content of zirconium in these materials had great effects on oxygen permeation flux, activation energy for oxygen permeation and operation stability. The high oxygen permeation flux of 0.90 ml cm(-2) min(-1) at 950degreesC, the single activation energy for oxygen permeation in the range of 600-950 degreesC and the long-term operation stability at a relatively lower operational temperature of 800 degreesC under air/He gradient were achieved for the BaCo0.4Fe0.4Zr0.2O3-delta material. Meanwhile, the effect of carbon dioxide on structural stability and oxygen permeability of this material was also studied in detail, which revealed that the reversible stability could be attained for it. (C) 2002 Elsevier Science B.V. All rights reserved.

Novel and ideal zirconium-based dense membrane reactors for partial oxidation of methane to syngas

A novel and ideal dense catalytic membrane reactor for the reaction of partial oxidation of methane to syngas (POM) was constructed from the stable mixed conducting perovskite material of BaCo0.4Fe0.4Zr0.2O3-delta and the catalyst of LiLaNiO/gamma-Al2O3. The POM reaction was performed successfully. Not only was a short induction period of 2 h obtained, but also a high catalytic performance of 96-98% CH4 conversion, 98-99% CO selectivity and an oxygen permeation flux of 5.4-5.8 ml cm(-2) min(-1) (1.9-2.) mumol m(-2) S-1 Pa-1) at 850 degreesC were achieved. Moreover, the reaction has been steadily carried out for more than 2200 h, and no interaction between the membrane material and the catalyst took place.

Triangular flow in event-by-event ideal hydrodynamics in Au+Au collisions at √SNN = 200A GeV

The first calculation of triangular flow ν3 in Au+Au collisions at √sNN = 200A GeV from an event-by-event (3 + 1) d transport+hydrodynamics hybrid approach is presented. As a response to the initial triangularity Ie{cyrillic, ukrainian}3 of the collision zone, ν3 is computed in a similar way to the standard event-plane analysis for elliptic flow ν2. It is found that the triangular flow exhibits weak centrality dependence and is roughly equal to elliptic flow in most central collisions. We also explore the transverse momentum and rapidity dependence of ν2 and ν3 for charged particles as well as identified particles. We conclude that an event-by-event treatment of the ideal hydrodynamic evolution startingwith realistic initial conditions generates the main features expected for triangular flow. © 2010 The American Physical Society.

Multi-zone TAP-reactors theory and application - IV. Ideal and non-ideal boundary conditions

We study the influence of non-ideal boundary and initial conditions (BIC) of a temporal analysis of products (TAP) reactor model on the data (observed exit flux) analysis. The general theory of multi-response state-defining experiments for a multi-zone TAP reactor is extended and applied to model several alternative boundary and initial conditions proposed in the literature. The method used is based on the Laplace transform and the transfer matrix formalism for multi-response experiments. Two non-idealities are studied: (1) the inlet pulse not being narrow enough (gas pulse not entering the reactor in Dirac delta function shape) and (2) the outlet non-ideality due to imperfect vacuum. The effect of these non-idealities is analyzed to the first and second order of approximation. The corresponding corrections were obtained and discussed in detail. It was found that they are negligible. Therefore, the model with ideal boundary conditions is proven to be completely adequate to the description and interpretation of transport-reaction data obtained with TAP-2 reactors.