Evaluation of a micro PV-Wind hybrid system in Nordic climate conditions

A one year data analysis for a micro PV-Wind hybrid system (0.52 kW + 1 kW), installed in Borlänge/Sweden is presented in this paper. The system performance was evaluated according the guidelines of the IEC 61724 standard. The parameters obtained allow a comparison with similar systems. The measurement data are also used to evaluate the sizing and operation of the hybrid system. In addition, the system was modelled in HOMER to study sizing options.

Evaluation of a Micro PV-Diesel Hybrid System in Tanzania

In April 2011 a monitoring system was installed to enable studies of the performance and the usage of a micro PV-Diesel Hybrid system at the Ihushi Development Center (IDC) near Mwanza in Tanzania. Estimations of the load have been obtained by a survey of installed appliances and interviews with users of installed equipment. The load profile obtained by measurements has been analyzed and compared to estimations of the energy use. Further, the system size and performance were studied.

A user guide to simple monitoring and sustainable operation of PV-diesel hybrid systems : Handbook for system users and operators

This report contains a suggestion for a simple monitoring and evaluation guideline for PV-diesel hybrid systems. It offers system users a way to better understand if their system is operated in a way that will make it last for a long time. It also gives suggestions on how to act if there are signs of unfavourable use or failure. The application of the guide requires little technical equipment, but daily manual measurements. For the most part, it can be managed by pen and paper, by people with no earlier experience of power systems.The guide is structured and expressed in a way that targets PV-diesel hybrid system users with no, or limited, earlier experience of power engineering. It is less detailed in terms of motivations for certain choices and limitations, but rich in details concerning calculations, evaluation procedures and maintenance routines. A more scientific description of the guide can be found in a related journal article.

Evaluation of hybrid models for static and multistage transmission system planning

Neste trabalho é analisada a aplicação de algoritmos heurísticos para o Modelo Híbrido Linear - Hybrid Linear Model (HLM) - no problema de planejamento da expansão de sistemas de transmissão. O HLM é um modelo relaxado que ainda não foi suficientemente explorado. Assim, é realizada uma análise das características do modelo matemático e das técnicas de solução que podem ser usadas para resolver este tipo de modelo. O trabalho analisa em detalhes um algoritmo heurístico construtivo para o HLM e faz uma extensão da modelagem e da técnica de solução para o planejamento multi-estágio da expansão de sistemas de transmissão. Dentro deste contexto, também é realizada uma avaliação da qualidade das soluções encontradas pelo HLM e as possibilidades de aplicação deste modelo em planejamento de sistemas de transmissão. Finalmente, são apresentados testes com sistemas conhecidos na literatura especializada.

Evaluation of the Smear Layer and Hybrid Layer in Noncarious and Carious Dentin Prepared by Air Abrasion System and Diamond Tips

Purpose: To analyze the smear layer and the hybrid layer in noncarious and carious dentin prepared by different cutting instruments and restored with composite resin. Study design: Cavities were randomly prepared in 160 specimens (noncarious and artificial carious dentin) by high-speed diamond tips (KG Sorensen 1013), air abrasion system (Prepstart, Danville Engineering), ultrasonic tip (CVDentus 8.3231-1), and ultrasonic tip associated with ultrasonic cavitation by water for 10 s. Half of the cavities in each group were conditioned with 37% phosphoric acid for 15 s. The amount of smear layer and dentinal tubules present were analyzed using scanning electron microscopy and graded from 0 to 3. Cavities were prepared in another 20 noncarious specimens and 20 carious specimens and restored with adhesive composite resin system. The restorations were hemisected longitudinally and analyzed using scanning electron microscopy to evaluate the hybrid layer and resinous prolongation characteristics, using scores ranging from 1 to 6. Results: The data were statistically analyzed using Kruskal-Wallis and Dunn tests at 5% of significance level. There was evidence that the most efficient smear layer removal was the acid etching in the noncarious dentin and the water ultrasonic cavitation in the carious dentin. The hybrid layer formed on the noncarious and carious dentin prepared by the ultrasonic tip was more regular than in the specimens prepared by high-speed diamond tip, with many resinous prolongations. Conclusion: The ultrasonic tip seems to be a promising tool for carious dentin cavity preparation. Microsc. Res. Tech. 73:597-605, 2010. (C) 2009 Wiley-Liss, Inc.

The distribution of the P-M hybrid dysgenesis system in Drosophila melanogaster strains from Brazil

Wild-caught flies of Drosophila melanogaster from seven natural populations of extreme regions of Brazil (Sao Luis, MA; Teresina, PI; Rio Cipo, MG; Maringa, PR; Sao Jose do Rio Preto, SP; Joinville, SC; and Porto Alegre, RS) were studied with the purpose of evaluating hybrid dysgenesis due to mobilization of P elements and the regulatory capacity of the strains' cytotypes. Diagnostic crosses were made and the strains classified according to their P-M phenotypes. Four strains were classified as moderate P (MA, MG, PI, and SP), two as Q (PR and RS) and one as M' (SC). Females of southern strains (PR, SC, and RS) presented in A crosses lower degrees of gonadal dysgenesis scores than those from northern strains (MA and PI).

Low optical loss planar waveguides prepared in an organic-inorganic hybrid system

HfO2-(3-glycidoxipropil)trimethoxisilane (GPTS) planar waveguides were prepared by a sol-gel route. A stable sol of Hafnia nanocrystals was prepared and characterized by photon correlation spectroscopy and high resolution transmission electron microscopy. The suspension was incorporated in GPTS host and the resulting sol was deposited on borosilicate substrates by the spin coating technique. Optical properties such as refractive index, thickness, number of propagating modes, and attenuation coefficient were measured at 632.8, 543.5, and 1550 nm by the prism coupling technique as a function of the HfO2 content. (C) 2000 American Institute of Physics. [S0003-6951(00)03348-9].

Hybrid visual-driven decision support system in video monitor manufacturing

An intelligent system that emulates human decision behaviour based on visual data acquisition is proposed. The approach is useful in applications where images are used to supply information to specialists who will choose suitable actions. An artificial neural classifier aids a fuzzy decision support system to deal with uncertainty and imprecision present in available information. Advantages of both techniques are exploited complementarily. As an example, this method was applied in automatic focus checking and adjustment in video monitor manufacturing. Copyright © 2005 IFAC.

Correlation of the hybrid layer thickness and resin tags length with the bond strength of a self-etching adhesive system.

The objective of this study was to measure the thickness of the hybrid layer (HLT), length of resin tags (RTL) and bond strength (BS) in the same teeth, using a self-etching adhesive system Adper Prompt L Pop to intact dentin and to analyze the correlation between HLTand RTL and their BS. Ten human molars were used for the restorative procedures and each restored tooth was sectioned in mesio-distal direction. One section was submitted to light microscopy analysis of HLT and RTL (400x). Another section was prepared and submitted to the microtensile bond test (0.5 mm/min). The fractured surfaces were analyzed using scanning electron microscopy to determine the failure pattern. Correlation between HLT and RTL with the BS data was analyzed by linear regression. The mean values of HLT, RTL and BS were 3.36 microm, 12.97 microm and 14.10 MPa, respectively. No significant relationship between BS and HLT (R2= 0.011, p>0.05) and between BS and RTL (R2= 0.038) was observed. The results suggested that there was no significant correlation between the HLT and RTL with the BS of the self-etching adhesive to dentin.

Observation of tags and hybrid layer of a single bottle conventional adhesive system and a self-etching adhesive system, on sound dentin.

This experimental light microscopy study investigated the formation of a hybrid layer and resin tags on sound dentin, after utilization of conventional and self-etching adhesive systems. After restorative procedures, the specimens were decalcified in a formic acid and sodium citrate solution, embedded in paraffin, sectioned at 6-microm thickness and stained by the Brown & Brenn method for analysis and measurement by light microscopy (AXIOPHOT) (400x). The results were statistically analyzed by analysis of variance, at a significance level of 5%. Based on the results, it could be concluded that the conventional adhesive allowed the formation of a thicker hybrid layer than the self-etching adhesive, with similar penetration into the dentinal tubules (resin tags).

Correlation between hybrid layer thickness, resin tag length and microtensile bond strength of a self-etching adhesive system

The purpose of this study was to evaluate the correlation between the hybrid layer thickness, resin tag length and resin bond strength of a self-etching adhesive system to sound dentin tissue in vivo. After performing restorative procedures and tooth extractions, ten specimens were sectioned in a mesiodistal direction. One dental section was used for light microscope analysis, in which both the resin tag length and hybrid layer thickness were measured, while the other section was analyzed using a microtensile test (0.5 mm/min). The fractured surface of the latter section was characterized using a stereoscopic magnifying glass (40x magnifcation). The results were subject to statistical analysis using the Pearson Correlation Test (a = 0.05). The hybrid layer thickness, resin tag length and resin bond strength mean values were 2.19 microm (0.34), 4.34 microm (0.28) and 9.73 MPa (5,55), respectively. In addition, correlation tests between the resin tag length and the resin bond strength (r=0.014) and also between the hybrid layer thickness and bond strength (r=0.43), showed no statistically significant correlation. The microtensile bond strength of Adper Prompt L Pop self-etching adhesive system does not depend on hybrid layer thickness or resin tag length.

A hybrid method for the solution of a sparse power system matrices on vector computers

This paper describes a methodology for solving a linear system of equations on vector computer. The methodology combines direct and inverse factors. The decomposition and implementation of the direct solution in a CRAY Y-MPZE/232, and the performance results are discussed.

Distributed Hybrid Agent Based Intrusion Detection and Real Time Response System

Wireless LANs are growing rapidly and security has always been a concern. We have implemented a hybrid system, which will not only detect active attacks like identity theft causing denial of service attacks, but will also detect the usage of access point discovery tools. The system responds in real time by sending out an alert to the network administrator.

Numerical optimization,modeling and system evaluation of a thermophotovoltaic hybrid panel

Photovoltaic (PV) solar panels generally produce electricity in the 6% to 16% efficiency range, the rest being dissipated in thermal losses. To recover this amount, hybrid photovoltaic thermal systems (PVT) have been devised. These are devices that simultaneously convert solar energy into electricity and heat. It is thus interesting to study the PVT system globally from different point of views in order to evaluate advantages and disadvantages of this technology and its possible uses. In particular in Chapter II, the development of the PVT absorber numerical optimization by a genetic algorithm has been carried out analyzing different internal channel profiles in order to find a right compromise between performance and technical and economical feasibility. Therefore in Chapter III ,thanks to a mobile structure built into the university lab, it has been compared experimentally electrical and thermal output power from PVT panels with separated photovoltaic and solar thermal productions. Collecting a lot of experimental data based on different seasonal conditions (ambient temperature,irradiation, wind...),the aim of this mobile structure has been to evaluate average both thermal and electrical increasing and decreasing efficiency values obtained respect to separate productions through the year. In Chapter IV , new PVT and solar thermal equation based models in steady state conditions have been developed by software Dymola that uses Modelica language. This permits ,in a simplified way respect to previous system modelling softwares, to model and evaluate different concepts about PVT panel regarding its structure before prototyping and measuring it. Chapter V concerns instead the definition of PVT boundary conditions into a HVAC system . This was made trough year simulations by software Polysun in order to finally assess the best solar assisted integrated structure thanks to F_save(solar saving energy)factor. Finally, Chapter VI presents the conclusion and the perspectives of this PhD work.

Charakterisierung spezieller pflanzlicher Gamma-Tubulin-Sequenzbereiche und Detektion potentieller Interaktionspartner mittels Yeast-two-Hybrid-System

Mitotische und postmitotische Vorgänge pflanzlicher Zellen basieren auf der Funktion von Mikrotubuli. Es liegen nur wenige gesicherte Erkenntnisse zur Organisation dieser Multifunktionalität vor. Eine zentrale Bedeutung wird bei der Nukleation der Mikrotubuli an MTOCs durch γ-Tubulin zugeschrieben. Deren Zusammenlagerung an MTOCs ist jedoch noch nicht richtig verstanden. Domänen, die an der Proteinoberfläche exponiert werden, könnten in Interaktionen involviert sein. Hier werden im Besonderen der γ-A und γ-B-Peptivmotiv diskutiert. Es wurde das γ-A- und γ-B-Peptidmotiv des γ-Tubulins hinsichtlich einer Konservierung innerhalb des Pflanzenreiches untersucht. Die beiden Bereiche sind bei den grünen Landpflanzen stark konserviert. Sie divergieren stark zu den einzelligen Grünalgen Chlamydomonas reinhardtii und Chlorella spec. Es wurden daher in der bestehenden phylogentischen Lücke weitere Organismen hinsichtlich des γ-A und γ-B Peptidmotivs untersucht. Auswahlkriterien der Organismen waren Ein-/Mehrzelligkeit, Besitz/Abwesenheit von Centriolen und Besitz/Abwesenheit von Geißeln. Des weiteren wurde mit verschiedenen γ-Tubulin-Konstrukten um das γ-A- und γ-B-Peptidmotiv, gewonnen aus Nicotiana tabacum (BY2) mittels Y2H-System nach Interaktionspartnern gesucht. Bei den Sequenzuntersuchungen des γ-A- und γ-B-Peptidmotivs konnte festgestellt werden, dass die Konservierung innerhalb der Streptophytenlinie erfolgt. Interessant erweist sich die Tatsache, dass dieses Motiv bei den Jochalgen, welche ebenfalls den Streptophyten angehören, nur im γ-A-Peptidmotiv auftritt. Es besteht die Möglichkeit, dass die beiden potentiellen Interaktionspartner verschiedene Proteine als Interaktions-partner besitzen. Durch eine Anwendung eines auf dem GAL4-Protein basierenden Y2H-Systems mit vier unterschiedlichen Konstrukten des γ-Tubulin-A/B-Peptidbereichs als Köder-konstrukt und einer cDNA-Bibliothek als Beutekonstrukt, wurden diverse Sequenzen identifiziert. Identifiziert wurden das Poly(A)-Bindeprotein, Glycerin-aldehyd-3-phosphatdehydrogenase, die S-adenosyl-L-methionine-Synthetase, diverse Proteasom-Untereinheiten, eine sekretorische Peroxidase, eine Ascorbat-Peroxidase, die NtPOX1-Peroxidase und verschiedene Peroxidasen aus Nicotiana tabacum, Sequenzen des Chloroplastengenoms, ein Myosin-ähnliches Protein und eine Sequenz auf dem 5. Chromosom des Medicago truncatula-Klons mth2-16f8 und diverse humane Sequenzen der Proteine DKFZp68 und DKFZp77. Die Ergebnisse weisen auf eine komplexe Funktionsweise der unterschiedlichen Komponenten des pflanzlichen Cytoskeletts und des γ-Tubulins hin. Zur Aufklärung müsste dies in Zukunft mittels anderer genetischer, biochemischer oder funktioneller Methoden untersucht werden. Hypothesen über Interaktionen der Cytoskelettkomponenten können wahrscheinlich nicht allein durch die Anwendung des Y2H-Systems aufgeklärt werden.