Pinguino In-bearing polymetallic vein deposit, Deseado Massif, Patagonia, Argentina: characteristics of mineralization and ore-forming fluids

The Pinguino deposit, located in the low sulfidation epithermal metallogenetical province of the Deseado Massif, Patagonia, Argentina, represents a distinct deposit type in the region. It evolved through two different mineralization events: an early In-bearing polymetallic event that introduced In, Zn, Pb, Ag, Cd, Au, As, Cu, Sn, W and Bi represented by complex sulfide mineralogy, and a late Ag-Au quartz-rich vein type that crosscut and overprints the early polymetallic mineralization. The indium-bearing polymetallic mineralization developed in three stages: an early Cu-Au-In-As-Sn-W-Bi stage (Ps(1)), a Zn-Pb-Ag-In-Cd-Sb stage (Ps(2)) and a late Zn-In-Cd (Ps(3)). Indium concentrations in the polymetallic veins show a wide range (3.4 to 1,184 ppm In). The highest indium values (up to 1,184 ppm) relate to the Ps(2) mineralization stage, and are associated with Fe-rich sphalerites, although significant In enrichment (up to 159 ppm) is also present in the Ps(1) paragenesis associated with Sn-minerals (ferrokesterite and cassiterite). The hydrothermal alteration associated with the polymetallic mineralization is characterized by advanced argillic alteration within the immediate vein zone, and sericitic alteration enveloping the vein zone. Fluid inclusion studies indicate homogenisation temperatures of 308.2-327A degrees C for Ps(1) and 255-312.4A degrees C for Ps(2), and low to moderate salinities (2 to 5 eq.wt.% NaCl and 4 to 9 eq.wt.% NaCl, respectively). delta(34)S values of sulfide minerals (+0.76aEuro degrees to +3.61aEuro degrees) indicate a possible magmatic source for the sulfur in the polymetallic mineralization while Pb isotope ratios for the sulfides and magmatic rocks ((206)Pb/(204)Pb, (207)Pb/(204)Pb and (208)Pb/(204)Pb ratios of 17.379 to 18.502; 15.588 to 15.730 and 38.234 to 38.756, respectively) are consistent with the possibility that the Pb reservoirs for both had the same crustal source. Spatial relationships, hydrothermal alteration styles, S and Pb isotopic data suggest a probable genetic relation between the polymetallic mineralization and dioritic intrusions that could have been the source of metals and hydrothermal fluids. Mineralization paragenesis, alteration mineralogy, geochemical signatures, fluid inclusion data and isotopic data, confirm that the In-bearing polymetallic mineralization from Pinguino deposit is a distinct type, in comparison with the well-known epithermal low sulfidation mineralization from the Deseado Massif.

Estudo do comportamento mecânico e microestrutural de um aço maraging após soldagem a laser e tratamentos térmicos

Pós-graduação em Engenharia Mecânica - FEG

Constitutive models for biodegradable thermoplastic ropes for ligament repair

The concept behind a biodegradable ligament device is to temporarily replace the biomechanical functions of the ruptured ligament, while it progressively regenerates its capacities. However, there is a lack of methods to predict the mechanical behaviour evolution of the biodegradable devices during degradation, which is an important aspect of the project. In this work, a hyper elastic constitutive model will be used to predict the mechanical behaviour of a biodegradable rope made of aliphatic polyesters. A numerical approach using ABAQUS is presented, where the material parameters of the model proposal are automatically updated in correspondence to the degradation time, by means of a script in PYTHON. In this method we also use a User Material subroutine (UMAT) to apply a failure criterion base on the strength that decreases according to a first order differential equation. The parameterization of the material model proposal for different degradation times were achieved by fitting the theoretical curves with the experimental data of tensile tests on fibres. To model all the rope behaviour we had considered one step of homogenisation considering the fibres architectures in an elementary volume. (C) 2012 Elsevier Ltd. All rights reserved.

Fluid dynamic analysis and modelling of industrial chemical equipment

The research is aimed at contributing to the identification of reliable fully predictive Computational Fluid Dynamics (CFD) methods for the numerical simulation of equipment typically adopted in the chemical and process industries. The apparatuses selected for the investigation, specifically membrane modules, stirred vessels and fluidized beds, were characterized by a different and often complex fluid dynamic behaviour and in some cases the momentum transfer phenomena were coupled with mass transfer or multiphase interactions. Firs of all, a novel modelling approach based on CFD for the prediction of the gas separation process in membrane modules for hydrogen purification is developed. The reliability of the gas velocity field calculated numerically is assessed by comparison of the predictions with experimental velocity data collected by Particle Image Velocimetry, while the applicability of the model to properly predict the separation process under a wide range of operating conditions is assessed through a strict comparison with permeation experimental data. Then, the effect of numerical issues on the RANS-based predictions of single phase stirred tanks is analysed. The homogenisation process of a scalar tracer is also investigated and simulation results are compared to original passive tracer homogenisation curves determined with Planar Laser Induced Fluorescence. The capability of a CFD approach based on the solution of RANS equations is also investigated for describing the fluid dynamic characteristics of the dispersion of organics in water. Finally, an Eulerian-Eulerian fluid-dynamic model is used to simulate mono-disperse suspensions of Geldart A Group particles fluidized by a Newtonian incompressible fluid as well as binary segregating fluidized beds of particles differing in size and density. The results obtained under a number of different operating conditions are compared with literature experimental data and the effect of numerical uncertainties on axial segregation is also discussed.

Eine neue Form der Pyruvatkinase in Säugerspermien

Nach Homogenisation ejakulierter Eberspermien und Zentrifugation des Homogenates blieben mehr als 60% der Aktivität des glykolytischen Enzyms Pyruvatkinase (PK) an Zellfragmenten im Sediment gebunden. Diese strukturgebundene PK wurde als PK-S bezeichnet. Das Detergenz Triton X-100 führte nicht zur Ablösung der PK-S; mit Trypsin konnten jedoch rund 80% der PK-S ohne Verlust an Aktivität von den Strukturen gelöst und durch kombinierte Kationenaustausch- und Hydrophobizitätschromatographie gereinigt werden (spezifische Aktivität: 116,7 U/mg Protein). Die lösliche PK aus Eberspermien konnte ebenfalls durch ein ähnliches Verfahren angereichert werden. Im Gel (SDS-PAGE) zeigten die Untereinheiten der PK-S mit 64.400 eine geringfügig größere relative Molekülmasse als die der PK-M1 aus Kaninchenmuskel (62.000). Die kinetischen Eigenschaften der abgelösten PK-S als auch der noch an Spermienstrukturen gebundenen PK-S und der löslichen PK aus Eberspermien waren sehr ähnlich und entsprachen der M1-Isoform der PK. Antikörper gegen Kaninchenmuskel-PK (Anti-PK-M1) reagierten auch mit der löslichen PK und der PK-S aus Eberspermien. Edman-Abbau der ersten 19 Aminosäuren zeigte, dass die tryptisch abgelöste PK-S am N-Terminus um 5 Aminosäuren gegenüber nativer PK-M1 verlängert ist, während der C-Terminus der erhaltenen PK-S-Sequenz mit einem meist nahe dem N-Terminus gelegenen Sequenzabschnitt der PK-M1 und -M2 übereinstimmt. Die N-terminale Verlängerung der nativen PK-S enthält sicherlich mehr als die nach tryptischer Lyse nachgewiesenen 5 Aminosäuren. Vergleiche der Aminosäure- und übersetzten Nukleotidsequenzen sowie die kinetischen Eigenschaften lassen vermuten, dass die PK-S, wie die PK-M1 und PK-M2, vom PKM-Gen codiert wird. Gegen die gereinigte PK-S wurden Antikörper in Kaninchen produziert. Da das Antiserum nicht ausreichend spezifisch für PK-S war, wurden aus ihm affinitätschromatographisch Antikörper (Anti-PK-S) isoliert, die hohe Affinität zu einem synthetisierten PK-S-Peptid (13 N-terminale Aminosäuren der tryptisch abgelösten PK-S) hatten. Dieses Anti-PK-S-Präparat war spezifisch für PK-S; es reagierte weder mit Kaninchenmuskel-PK noch mit löslicher PK oder anderen Proteinen aus Eberspermien. Anti-PK-S und Anti-PK-M1 wurden zur Lokalisierung von PK-S und löslicher PK in Spermien von Eber, Bulle und Mensch sowie in Schnitten von Eberhoden eingesetzt. Mit Anti-PK-S wurden der Bereich des Akrosoms und das lange flagellare Hauptstück sowie der Übergangsbereich zwischen Kopf und Mittelstück von Eberspermien fluoreszenzmarkiert, wogegen das kurze, die Mitochondrien enthaltende Mittelstück des Flagellums und der postakrosomale Kopfbereich nur mit Anti-PK-M1 markiert wurden. Immunogoldmarkierung in elektronenmikroskopischen Bildern bestätigte die Lokalisierung von PK-S im Akrosombereich. Im Hauptstück banden Anti-PK-M1 und Anti-PK-S an die fibröse Scheide. Glyzerinaldehyd-3-phosphat Dehydrogenase (GAPDH) konnte von mir ebenfalls im Akrosombereich, im Übergangsbereich zwischen Kopf und Mittelstück und an der fibrösen Scheide detektiert werden. Auch an Bullen- und Humanspermien konnte über Immunogoldmarkierung PK und vermutlich GAPDH an der fibrösen Scheide gezeigt werden. Im Akrosombereich dieser Spermien waren die Nachweise von PK und GAPDH jedoch nicht sicher. In Eberhodenschnitten war die PK-S erstmals, oder zumindest vermehrt, in den elongierenden Spermatiden über Fluoreszenzmarkierung nachweisbar, während andere, vermutlich somatische PK vermehrt in den früheren Stadien (Spermatogonien, aber auch in den Spermatozyten und runden Spermatiden) auftrat. Für die GAPDH zeigte sich ein ähnlicher Entwicklungsverlauf. Die Ergebnisse zeigen, dass in Eberspermien zwei Isoformen der PK auftreten: eine N-terminal verlängerte, strukturgebundene Form, die PK-S, und eine lösliche Form, die beide der PK-M1 ähneln. Der ungewöhnliche N-Terminus der PK-S dient vermutlich der spezifischen räumlichen Anordnung der PK-S im Akrosombereich und an der fibrösen Scheide, nicht aber der Modulation kinetischer Eigenschaften. Meine Untersuchungen stützen die Hypothese, dass in bestimmten Kompartimenten von Säugerspermien die Glykolyse durch Verankerung einiger ihrer Enzyme strukturell hochgeordnet ist. Dadurch wird vermutlich die Versorgung der Mitochondrien-freien Regionen mit ATP sichergestellt. Man kann diese Organisation als Anpassung des Stoffwechsels von Spermien deuten, bei denen die Mitochondrien in einem kleinen Bereich (Mittelstück) hinter dem Spermienkopf kompartimentiert sind. Im Hauptstück des Flagellums könnte die Glykolyse ATP für die Spermienmotilität liefern, im Akrosombereich für die Verhinderung einer vorzeitigen Akrosomreaktion. Somit käme der strukturierten Glykolyse eine essentielle Bedeutung für die Befruchtungsfähigkeit von Säugerspermien zu.

A novel isolation method of Brucella species and molecular tracking of Brucella suis biovar 2 in domestic and wild animals

Brucella suis biovar 2 is the most common aetiological agent of porcine brucellosis in Europe. B. suis biovar 2 is considered to have low zoonotic potential, but is a causative agent of reproductive losses in pigs, and it is thus economically important. The multilocus variable-number of tandem repeats genotyping analysis of 16 loci (MLVA-16) has proven to be highly discriminatory and is the most suitable assay for simultaneously identifying B. suis and tracking infections. The aim of this study was to investigate the relatedness between isolates of B. suis biovar 2 obtained during a brucellosis outbreak in domestic pigs and isolates from wild boars and hares collected from proximal or remote geographical areas by MLVA-16. A cluster analysis of the MLVA-16 data revealed that most of the isolates obtained from Switzerland clustered together, with the exception of one isolate. The outbreak isolates constituted a unique subcluster (with a genetic similarity >93.8%) distinct from that of the isolates obtained from wild animals, suggesting that direct transmission of the bacterium from wild boars to domestic pigs did not occur in this outbreak. To obtain a representative number of isolates for MLVA-16, alternative methods of Brucella spp. isolation from tissue samples were compared with conventional direct cultivation on a Brucella-selective agar. We observed an enhanced sensitivity when mechanical homogenisation was followed by host cell lysis prior to cultivation on the Brucella-selective agar. This work demonstrates that MLVA-16 is an excellent tool for both monitoring brucellosis and investigating outbreaks. Additionally, we present efficient alternatives for the isolation of Brucella spp.

Novel heating/cooling stage designed for fluid inclusion microthermometry of large stalagmite sections

Liquid–vapour homogenisation temperatures of fluid inclusions in stalagmites are used for quantitative temperature reconstructions in paleoclimate research. Specifically for this application, we have developed a novel heating/cooling stage that can be operated with large stalagmite sections of up to 17 × 35 mm2 to simplify and improve the chronological reconstruction of paleotemperature time-series. The stage is designed for use of an oil immersion objective and a high-NA condenser front lens to obtain high-resolution images for bubble radius measurements. The temperature accuracy of the stage is better than ± 0.1 °C with a precision (reproducibility) of ± 0.02 °C.

Effect of different breathing AIDS on ventilation distribution in adults with cystic fibrosis.

BACKGROUND AND OBJECTIVES We investigated the effect of different breathing aids on ventilation distribution in healthy adults and subjects with cystic fibrosis (CF). METHODS In 11 healthy adults and 9 adults with CF electrical impedance tomography measurements were performed during spontaneous breathing, continuous positive airway pressure (CPAP) and positive expiratory pressure (PEP) therapy randomly applied in upright and lateral position. Spatial and temporal ventilation distribution was assessed. RESULTS The proportion of ventilation directed to the dependent lung significantly increased in lateral position compared to upright in healthy and CF. This effect was enhanced with CPAP but neutralised with PEP, whereas the effect of PEP was larger in the healthy group. Temporal ventilation distribution showed exactly the opposite with homogenisation during CPAP and increased inhomogeneity with PEP. CONCLUSIONS PEP shows distinct differences to CPAP with respect to its impact on ventilation distribution in healthy adults and CF subjects EIT might be used to individualise respiratory physiotherapy.

Intransitive competition is widespread in plant communities and maintains their species richness

Intransitive competition networks, those in which there is no single best competitor, may ensure species coexistence. However, their frequency and importance in maintaining diversity in real-world ecosystems remain unclear. We used two large data sets from drylands and agricultural grasslands to assess: (1) the generality of intransitive competition, (2) intransitivity–richness relationships and (3) effects of two major drivers of biodiversity loss (aridity and land-use intensification) on intransitivity and species richness. Intransitive competition occurred in > 65% of sites and was associated with higher species richness. Intransitivity increased with aridity, partly buffering its negative effects on diversity, but was decreased by intensive land use, enhancing its negative effects on diversity. These contrasting responses likely arise because intransitivity is promoted by temporal heterogeneity, which is enhanced by aridity but may decline with land-use intensity. We show that intransitivity is widespread in nature and increases diversity, but it can be lost with environmental homogenisation.

A study of the mechanical behaviour of the human aortic artery by means of non-linear finite element models

En la presente tesis desarrollamos una estrategia para la simulación numérica del comportamiento mecánico de la aorta humana usando modelos de elementos finitos no lineales. Prestamos especial atención a tres aspectos claves relacionados con la biomecánica de los tejidos blandos. Primero, el análisis del comportamiento anisótropo característico de los tejidos blandos debido a las familias de fibras de colágeno. Segundo, el análisis del ablandamiento presentado por los vasos sanguíneos cuando estos soportan cargas fuera del rango de funcionamiento fisiológico. Y finalmente, la inclusión de las tensiones residuales en las simulaciones en concordancia con el experimento de apertura de ángulo. El análisis del daño se aborda mediante dos aproximaciones diferentes. En la primera aproximación se presenta una formulación de daño local con regularización. Esta formulación tiene dos ingredientes principales. Por una parte, usa los principios de la teoría de la fisura difusa para garantizar la objetividad de los resultados con diferentes mallas. Por otra parte, usa el modelo bidimensional de Hodge-Petruska para describir el comportamiento mesoscópico de los fibriles. Partiendo de este modelo mesoscópico, las propiedades macroscópicas de las fibras de colágeno son obtenidas a través de un proceso de homogenización. En la segunda aproximación se presenta un modelo de daño no-local enriquecido con el gradiente de la variable de daño. El modelo se construye a partir del enriquecimiento de la función de energía con un término que contiene el gradiente material de la variable de daño no-local. La inclusión de este término asegura una regularización implícita de la implementación por elementos finitos, dando lugar a resultados de las simulaciones que no dependen de la malla. La aplicabilidad de este último modelo a problemas de biomecánica se estudia por medio de una simulación de un procedimiento quirúrgico típico conocido como angioplastia de balón. In the present thesis we develop a framework for the numerical simulation of the mechanical behaviour of the human aorta using non-linear finite element models. Special attention is paid to three key aspects related to the biomechanics of soft tissues. First, the modelling of the characteristic anisotropic behaviour of the softue due to the collagen fibre families. Secondly, the modelling of damage-related softening that blood vessels exhibit when subjected to loads beyond their physiological range. And finally, the inclusion of the residual stresses in the simulations in accordance with the opening-angle experiment The modelling of damage is addressed with two major and different approaches. In the first approach a continuum local damage formulation with regularisation is presented. This formulation has two principal ingredients. On the one hand, it makes use of the principles of the smeared crack theory to avoid the mesh size dependence of the structural response in softening. On the other hand, it uses a Hodge-Petruska bidimensional model to describe the fibrils as staggered arrays of tropocollagen molecules, and from this mesoscopic model the macroscopic material properties of the collagen fibres are obtained using an homogenisation process. In the second approach a non-local gradient-enhanced damage formulation is introduced. The model is built around the enhancement of the free energy function by means of a term that contains the referential gradient of the non-local damage variable. The inclusion of this term ensures an implicit regularisation of the finite element implementation, yielding mesh-objective results of the simulations. The applicability of the later model to biomechanically-related problems is studied by means of the simulation of a typical surgical procedure, namely, the balloon angioplasty.

Hábitos alimenticios en alumnos y trabajadores de la Universidad Miguel Hernández

Objetivo: Describir los hábitos alimenticios de una comunidad universitaria. Material y métodos: Se llevó a cabo un estudio descriptivo transversal. El instrumento utilizado fue un cuestionario de frecuencias de consumo, administrado por entrevista personal a una muestra accidental de 147 personas. Constaba de cuatro secciones: 1) número de comidas y lugar donde se realizan, 2) patrones de consumo de los distintos grupos de alimentos, 3) modos de preparación de los alimentos, 4) datos de identificación y demográficos. Resultados: En comparación con el patrón de Vivanco y Palacios, nuestra muestra se caracteriza por: alto consumo de carnes (4 veces/semana), disminución del consumo de huevos (2v/sem.), incremento del consumo de hidratos de carbono complejos (5v/sem.), consumo ligeramente inferior de frutas (5v/sem.), ingesta insuficiente de verduras (4v/sem), legumbres (2v/sem) y pescados (2,5v/sem). Conclusiones y Recomendaciones: Atendiendo a los estudios referenciados, es conveniente disminuir el consumo de carnes, aumentando los aportes de pescados, verduras, hortalizas y legumbres, alimentos que, habiendo sido habituales en nuestra dieta mediterránea, parecen haber sido abandonados en beneficio de la conformación de una dieta que tiende a la homogeneización cultural.

Successional stage after land abandonment modulates fire severity and post-fire recovery in a Mediterranean mountain landscape

This study analyses the effect of successional stage after farmland terrace abandonment on post-fire plant recovery in a Mediterranean landscape. Specific objectives of the study were to (1) compare fuel characteristics and fire severity in three successional stages after farmland abandonment – dry grassland, dense shrubland and pine stands; (2) analyse the effect of pre-fire successional stage and fire severity on vegetation recovery and (3) analyse the relative vulnerability (i.e. potential for ecosystem shift and soil degradation) to wildfires of the successional stages. We assessed 30 abandoned terraces (15 unburned and 15 burned), with diverse successional stages, on the Xortà Range (south-east Spain). Post-fire recovery was measured 1, 4 and 7 years after fire. The successional stages varied in aboveground biomass, litter amount, vertical structure and continuity of plant cover, and flammability. Dry grassland showed the lowest fire severity, whereas no differences in severity were found between shrubland and pine stands. One year after fire, plant cover was inversely related to fire severity; this relationship attenuated with time after fire. Post-fire recovery of pine stands and shrubland led in both cases to shrublands, contributing to landscape homogenisation. The pine stands showed the largest changes in composition due to fire and the lowest post-fire plant recovery – a sign of high vulnerability to fire.

On the possibility of elastic strain localisation in a fault

The phenomenon of strain localisation is often observed in shear deformation of particulate materials, e.g., fault gouge. This phenomenon is usually attributed to special types of plastic behaviour of the material (e.g., strain softening or mismatch between dilatancy and pressure sensitivity or both). Observations of strain localisation in situ or in experiments are usually based on displacement measurements and subsequent computation of the displacement gradient. While in conventional continua the symmetric part of the displacement gradient is equal to the strain, it is no longer the case in the more realistic descriptions within the framework of generalised continua. In such models the rotations of the gouge particles are considered as independent degrees of freedom the values of which usually differ from the rotation of an infinitesimal volume element of the continuum, the latter being described for infinitesimal deformations by the non-symmetric part of the displacement gradient. As a model for gouge material we propose a continuum description for an assembly of spherical particles of equal radius in which the particle rotation is treated as an independent degree of freedom. Based on this model we consider simple shear deformations of the fault gouge. We show that there exist values of the model parameters for which the displacement gradient exhibits a pronounced localisation at the mid-layers of the fault, even in the absence of inelasticity. Inelastic effects are neglected in order to highlight the role of the independent rotations and the associated additional parameters. The localisation-like behaviour occurs if (a) the particle rotations on the boundary of the shear layer are constrained (this type of boundary condition does not exist in a standard continuum) and (b) the contact moment-or bending stiffness is much smaller than the product of the effective shear modulus of the granulate and the square of the width of the gouge layer. It should be noted however that the virtual work functional is positive definite over the range of physically meaningful parameters (here: contact stiffnesses, solid volume fraction and coordination number) so that strictly speaking we are not dealing with a material instability.

Ambivalent 'selves': Japanese women's diasporic experiences in Australian higher education

In an age of globalisation and internationalisation, how women learn to represent themselves in terms of their cultural, social and gender identities in the wider world is significant. A group of 17 Japanese women studying in postgraduate courses in three Australian universities were interviewed for part of this longitudinal project, and their case studies are presented in this paper to portray the women's lived experiences and interpret how higher education overseas affects their reconstruction of their 'selves' and traditional Japanese femininity. I set my analytic framework through a discussion of the forceful globalisation of higher education and discourses of identity and 'self', and then analyse the present status of Japanese women in contemporary Japan. I then provide excerpts of the women's narratives which indicate ambivalent 'selves' in transition. Two possibilities have arisen from their narratives to illuminate this ambivalence - one possibility is that women's positive experiences in Australia and their increased and diverse exposure to and experience of other cultures may influence cultural change such as the transformation of constructs of women at home, and challenge existing identity and femininity discourses in Japan. The second possibility is that negative aspects of their 'diasporic experiences' can also articulate other complex identity politics, such as Japanese women's 'double marginalisation' which means being both a woman and a member of an ethnic minority group, conflicts between the homogenisation of 'Asian women' and representations of 'new Japanese women', and their sense of belongingness to their original culture. These contradictory phenomena of identity formations within Japanese women have the potential to shift the debate and challenge current essentialist views of hegemonic homogenisation of regional identities.

Simplified preparation of human arterial sections for PCR analysis of Chlamydia pneumoniae and human DNA

AIMS: To investigate multiple techniques for the preparation of solid tissue for polymerase chain reaction (PCR) analysis, and to identify the most simple techniques for routine use in the laboratory. METHODS: Techniques for the preparation of arterial tissue samples including homogenisation, ultrafiltration, and treatments involving proteinase K, Gene Clean, lectin, and Fe3+ specific chelators were evaluated using the PCR to amplify both Chlamydia pneumoniae and human DNA. RESULTS: Treatment with either Gene-Clean or lectin and the Fe3+ specific chelator deferoxamine mesylate removed PCR inhibitors from tissue homogenates. Homogenisation followed by GeneClean treatment resulted in the amplification of C pneumoniae DNA from within a section of atherosclerotic carotid artery, implying that C pneumoniae elementary bodies had been disrupted. In eight further clinical samples from patients not known to have C pneumoniae infection, human DNA was amplified and no cross contamination was observed between samples. These samples contained no evidence of C pneumoniae by PCR. CONCLUSIONS: A simple preparation of solid tissue for PCR analysis, involving homogenisation followed by GeneClean treatment has been developed, and is effective for the amplification of both C pneumoniae and human DNA.