Estudo de uma coluna de absorção recheada para desidratação do gás natural utilizando microemulsão como absorvente

During natural gas processing, water removal is considered as a fundamental step in that combination of hydrocarbons and water favors the formation of hydrates. The gas produced in the Potiguar Basin (Brazil) presents high water content (approximately 15000 ppm) and its dehydration is achieved via absorption and adsorption operations. This process is carried out at the Gas Treatment Unit (GTU) in Guamaré (GMR), in the State of Rio Grande do Norte. However, it is a costly process, which does not provide satisfactory results when water contents as low as 0.5 ppm are required as the exit of the GTU. In view of this, microemulsions research is regarded as an alternative to natural gas dehydration activities. Microemulsions can be used as desiccant fluids because of their unique proprieties, namely solubilization enhancement, reduction in interfacial tensions and large interfacial area between continuous and dispersed phases. These are actually important parameters to ensure the efficiency of an absorption column. In this work, the formulation of the desiccant fluid was determined via phases diagram construction, employing there nonionic surfactants (RDG 60, UNTL L60 and AMD 60) and a nonpolar fluid provided by Petrobras GMR (Brazil) typically comprising low-molecular weight liquid hydrocarbons ( a solvent commonly know as aguarrás ). From the array of phases diagrams built, four representative formulations have been selected for providing better results: 30% RDG 60-70% aguarrás; 15% RDG 60-15% AMD 60-70% aguarrás, 30% UNTL L60-70% aguarrás, 15% UNTL L60-15% AMD 60-70% aguarrás. Since commercial natural gas is already processed, and therefore dehydrated, it was necessary to moister some sample prior to all assays. It was then allowed to cool down to 13ºC and interacted with wet 8-12 mesh 4A molecular sieve, thus enabling the generation of gas samples with water content (approximately 15000 ppm). The determination of the equilibrium curves was performed based on the dynamic method, which stagnated liquid phase and gas phase at a flow rate of 200 mL min-1. The hydrodynamic study was done with the aim of established the pressure drop and dynamic liquid hold-up. This investigation allowed are to set the working flow rates at 840 mL min-1 for the gas phase and 600 mLmin-1 for the liquid phase. The mass transfer study indicated that the system formed by UNTL L60- turpentine-natural gas the highest value of NUT

de Sitter special relativity

A special relativity based on the de Sitter group is introduced, which is a theory that might hold up in the presence of a non-vanishing cosmological constant. Like ordinary special relativity, it retains the quotient character of spacetime, and a notion of homogeneity. As a consequence, the underlying spacetime will be a de Sitter spacetime, whose associated kinematics will differ from that of ordinary special relativity. The corresponding modified notions of energy and momentum are obtained, and the exact relationship between them, which is invariant under a re-scaling of the involved quantities, explicitly exhibited. Since the de Sitter group can be considered a particular deformation of the Poincare group, this theory turns out to be a specific kind of deformed (or doubly) special relativity. Some experimental consequences, as well as the causal structure of spacetime-modified by the presence of the de Sitter horizon-are briefly discussed.

Construção e desenvolvimento de um secador de leito pulso-fluidizado para secagem de pastas e polpas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The employment situation in Latin America and the Caribbean: Labour productivity and distribution issues

Although the economies of Latin America and the Caribbean grew more slowly in 2011 than in 2010, there were some improvements on the employment front. Workers benefited from the region’s satisfactory economic performance in an increasingly complex international setting. The unemployment rate fell from 7.3% in 2010 to 6.7% in 2011 thanks to a halfpercentage- point gain in the urban employment rate. Both rates are at levels that have not been seen for a long time. The proportion of formal jobs with social benefits rose as well, and underemployment declined. The average wage and the minimum wage both increased in real terms, albeit only moderately. Economic performance and the employment situation varied widely among the subregions. The unemployment rate dropped by 0.6 percentage points in South America but 0.4 percentage points in the countries of the northern part of Latin America. In the countries of the Caribbean, the employment rate was up by 0.2 percentage points. The data show that substantial labour market gaps and serious labour-market insertion issues remain. This is especially the case for women and young people, for whom unemployment rates and other labour indicators are still unfavourable. The second part of this report looks at whether the fruits of economic growth and rising productivity have been distributed equitably between workers and companies. Between 2002 and 2008 (the most recent expansionary economic cycle), wages as a percentage of GDP fell in 13 of the 21 countries of the region for which data are available and rose in just 8. This points to redistribution that is unfavourable to workers, which is worrying in a region which already has the most unequal distribution of income in the world. Underlying this trend is the fact that, worldwide, wages have grown less than productivity. Beyond the ethical dimension of this issue, it jeopardizes the social and economic sustainability of growth. For example, one of the root causes of the recent financial crisis was that households in the United States responded to declining wage income by borrowing more to pay for consumption and housing. This turned out to be unsustainable in the long run. Over time, it undermines the labour market’s contribution to the efficient allocation of resources and its distributive function, too, with negative consequences for democratic governance. Among the triggers of this distributive worsening most often cited in the global debate are market deregulation and its impact on financial globalization, technological change that favours capital over labour, and the weakening of labour institutions. What is needed here is a public policy effort to help keep wage increases from lagging behind increases in productivity. Some countries of the region, especially in South America, saw promising developments during the second half of the 2000s in the form of a positive trend reversal in wages as a percentage of GDP. One example is Brazil, where a minimum wage policy tailored to the dynamics of the domestic market is considered to be one of the factors behind an upturn in the wage share of GDP. The region needs to grow more and better. Productivity must grow at a steady pace, to serve as the basis for sustained improvements in the well-being of the populace and to narrow the gap between the economies of Latin America and the Caribbean and the more advanced economies. And inequality must be decreased; this could be achieved by closing the productivity gap between upgraded companies and the many firms whose productivity is low. As set out in this report, the region made some progress between 2002 and 2010, with labour productivity rising at the rate of 1.5% a year. But this progress falls short of that seen in other regions such as Sub-Saharan Africa (2.1%) and, above all, East Asia (8.3%, not counting Japan and the Republic of Korea). Moreover, in many of the countries of the region these gains have not been distributed equitably. Therein lies a dual challenge that must be addressed: continue to increase productivity while enhancing the mechanisms for distributing gains in a way that will encourage investment and boost worker and household income. The Economic Commission for Latin America and the Caribbean (ECLAC) and the International Labour Organization (ILO) estimate that the pace of economic growth in the region will be slightly slower in 2012 than in 2011, in a global economic scenario marked by the cooling of several of the main economic engines and a high degree of uncertainty concerning, above all, prospects for the euro zone. The region is expected to continue to hold up well to this worsening scenario, thanks to policies that leveraged more favourable conditions in the past. This will be felt in the labour markets, as well, so expectations are that unemployment will edge down by as much as two tenths of a decimal point.

Influência da relação entre diâmetros no comportamento hidrodinâmico de reatores aeróbios de leito fluidizado com circulação em tubos concêntricos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise e demonstração do comportamento do escoamento bifásico gás-sólido

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A representação da metamemória no romance brasileiro: um olhar sobre Olho de rei, de Edgard Telles Ribeiro, e Leite derramado, de Chico Buarque

Pós-graduação em Letras - FCLAS

Parâmetros de dispersão de ar em células mecânicas de flotação em usinas brasileiras

O objetivo desse trabalho é apresentar e discutir a determinação dos parâmetros de dispersão de ar em células mecânicas de flotação, em circuitos industriais brasileiros. Foram investigados os circuitos rougher e scavenger das usinas RPM, Taquari-Vassouras, Copebras e Fosfértil-Catalão (atual Vale Fertilizantes). Nas usinas RPM e Taquari-Vassouras, foram determinados a velocidade superficial do ar (Jg), o hold-up do ar (εg), o diâmetro médio de bolhas (d32) e o fluxo de área superficial de bolhas (Sb). Para as outras usinas, foram determinados somente o Jg e εg. Os resultados mostraram que, com exceção da RPM, todos os circuitos investigados apresentaram baixos valores para os parâmetros de dispersão do ar. Taquari-Vassouras apresentou os mais baixos valores médios para Jg e εg, respectivamente, 0,05 cm/s e 5%. Os maiores valores de Jg foram determinados no circuito rougher da Copebras, 1,17 cm/s, ao passo que a RPM apresentou os maiores valores para o hold-up e tamanho de bolha, respectivamente, 31% e 2,61mm. Os valores obtidos, para Sb, situaram-se abaixo daqueles reportados na literatura.

Developments in target-ion source chemistry for ISOL facilities

This work investigates the influence of chemical reactions on the release of elements from target-ion source units for ISOL facilities. Methods employed are thermochromatography, yield and hold-up time measurements; adsorption enthalpies have been determined for Ag and In. The results obtained with these methods are consistent. Elements exhibit reversible or irreversible reactions on different surfaces (Tantalum, quartz, sapphire). The interactions with surfaces inside the target-ion source unit can be used to improve the quality of radioactive ion beams. Spectroscopic data obtained at CERN-ISOLDE using a medium-temperature quartz transfer line show the effectivity of selective adsorption for beam purification. New gamma lines of 131Cd have been observed and a tentative decay scheme is presented.

The Repairing of Misconceptions through the Use of Inquiry-Based Activities

Misconceptions exist in all fields of learning and develop through a person’s preconception of how the world works. Students with misconceptions in chemical engineering are not capable of correctly transferring knowledge to a new situation and will likely arrive at an incorrect solution. The purpose of this thesis was to repair misconceptions in thermodynamics by using inquiry-based activities. Inquiry-based learning is a method of teaching that involves hands-on learning and self-discovery. Previous work has shown inquiry-based methods result in better conceptual understanding by students relative to traditional lectures. The thermodynamics activities were designed to guide students towards the correct conceptual understanding through observing a preconception fail to hold up through an experiment or simulation. The developed activities focus on the following topics in thermodynamics: “internal energy versus enthalpy”, “equilibrium versus steady state”, and “entropy”. For each topic, two activities were designed to clarify the concept and assure it was properly grasped. Each activity was coupled with an instructions packet containing experimental procedure as well as pre- and post-analysis questions, which were used to analyze the effect of the activities on the students’ responses. Concept inventories were used to monitor students’ conceptual understanding at the beginning and end of the semester. The results did not show a statistically significant increase in the overall concept inventory scores for students who performed the activities compared to traditional learning. There was a statistically significant increase in concept area scores for “internal energy versus enthalpy” and “equilibrium versus steady state”. Although there was not a significant increase in concept inventory scores for “entropy”, written analyses showed most students’ misconceptions were repaired. Students transferred knowledge effectively and retained most of the information in the concept areas of “internal energy versus enthalpy” and “equilibrium versus steady state”.

Two-dimensional supramolecular polymers

One of the biggest issues of modern materials science is developing of strategies to create large and ordered assemblies in the form of discrete nanoscale objects. Oligopyrenotides (OPs) represent novel class of amphiphilic molecules which tend to self-assemble forming highly ordered structures. As has been already shown OPs are able to form 1D («rod-like») supramolecular polymer [1]. Since programmed arraying of polyaromatic hydrocarbons in structurally defined objects could offer enhanced performance over the individual components, prediction and controlling of their spatial arrangement remains challenging. Herein we demonstrate that certain changes to design of pyrene’s molecular core allow Py3 form 2D supramolecular assemblies («nanosheets») instead of 1D. Two dimensional supramolecular polymers are attractive objects due to their exceptional properties which originate from in-plan alignment of molecular units in the sheets with constant thickness ~ 2 nm [2]. These assemblies have high degree of internal order: the interior consists of hydrophobic pyrenes and alkyl chains, whereas the exterior exists as a net of hydrophilic, negatively charged phosphates. The Py3 units are hold up by non-covalent interactions what makes these assemblies totally reversible. Moreover the polymerization occurs via nucleation-elongation mechanism. To study Py3 self-assembly, we carried out whole set of spectroscopic (UV/vis, fluorescence, DLS) and microscopic experiments (AFM)

Two-dimensional supramolecular polymers

One of the biggest issues of modern materials science is developing of strategies to create large and ordered assemblies in the form of discrete nanoscale objects. Oligopyrenotides (OPs) represent novel class of amphiphilic molecules which tend to self-assemble forming highly ordered structures. As has been already shown OPs are able to form 1D («rod-like») supramolecular polymer [1]. Since programmed arraying of polyaromatic hydrocarbons in structurally defined objects could offer enhanced performance over the individual components, prediction and controlling of their spatial arrangement remains challenging. Herein we demonstrate that certain changes to design of pyrene’s molecular core allow Py3 form 2D supramolecular assemblies («nanosheets») instead of 1D. Two dimensional supramolecular polymers are attractive objects due to their exceptional properties which originate from in-plan alignment of molecular units in the sheets with constant thickness ~ 2 nm [2]. These assemblies have high degree of internal order: the interior consists of hydrophobic pyrenes and alkyl chains, whereas the exterior exists as a net of hydrophilic, negatively charged phosphates. The Py3 units are hold up by non-covalent interactions what makes these assemblies totally reversible. Moreover the polymerization occurs via nucleation-elongation mechanism. To study Py3 self-assembly, we carried out whole set of spectroscopic (UV/vis, fluorescence, DLS) and microscopic experiments (AFM)

What drives adult personality development? A comparison of theoretical perspectives and empirical evidence

Increasing numbers of empirical studies provide compelling evidence that personality traits change across the entire lifespan. What initiates this continuing personality development and how does this development proceed? In this paper, we compare six theoretical perspectives that offer testable predictions about why personality develops the way it does and identify limitations and potentials of these perspectives by reviewing how they hold up against the empirical evidence. While all of these perspectives have received some empirical support, there is only little direct evidence for propositions put forward by the five-factor theory of personality and the theory of genotype→environment effects. In contrast, the neo-socioanalytic theory appears to offer a comprehensive framework that fits the empirical findings and allows the integration of other, more specialized, perspectives that focus on specific aspects of personality development like the role of time, systematic differences between categories of social roles or the active partake of the person himself or herself. We draw conclusions on the likely driving factors for adult personality development and identify avenues for future research.

Cognitive Comparative Advantage and the Organization of Work: Lessons from Herbert Simon's Vision of the Future

In a marvelous but somewhat neglected paper, 'The Corporation: Will It Be Managed by Machines?' Herbert Simon articulated from the perspective of 1960 his vision of what we now call the New Economy the machine-aided system of production and management of the late twentieth century. Simon's analysis sprang from what I term the principle of cognitive comparative advantage: one has to understand the quite different cognitive structures of humans and machines (including computers) in order to explain and predict the tasks to which each will be most suited. Perhaps unlike Simon's better-known predictions about progress in artificial intelligence research, the predictions of this 1960 article hold up remarkably well and continue to offer important insights. In what follows I attempt to tell a coherent story about the evolution of machines and the division of labor between humans and machines. Although inspired by Simon's 1960 paper, I weave many other strands into the tapestry, from classical discussions of the division of labor to present-day evolutionary psychology. The basic conclusion is that, with growth in the extent of the market, we should see humans 'crowded into' tasks that call for the kinds of cognition for which humans have been equipped by biological evolution. These human cognitive abilities range from the exercise of judgment in situations of ambiguity and surprise to more mundane abilities in spatio-temporal perception and locomotion. Conversely, we should see machines 'crowded into' tasks with a well-defined structure. This conclusion is not based (merely) on a claim that machines, including computers, are specialized idiots-savants today because of the limits (whether temporary or permanent) of artificial intelligence; rather, it rests on a claim that, for what are broadly 'economic' reasons, it will continue to make economic sense to create machines that are idiots-savants.

Proceedings of the 10th Annual Biochemical Engineering Symposium

This the tenth in a series of symposia devoted to talks by students on their biochemical engineering research. The first, third, fifth, and ninth were at Kansas State University in Manhattan, the second and fourth were at the University of Nebraska–Lincoln, the sixth was in Kansas City in conjunction with the 81st American Institute of Chemical Engineers National Meeting, the seventh was at Iowa State University in Ames, and the eighth was held at the University of Missouri–Columbia. Contents"Combined Autohydrolysis-Organosolv Pretreatment of Lignocellulosic Materials," Robert A. Lewis, Colorado State University "An Investigation of Cellulase Activity Assays," Minhhuong Nguyen, University of Missouri–Columbia "Action Pattern of a Xylobiohydrolase from Aspergillus niger," Mary M. Frederick, Iowa State University "Estimation of Heats of Combustion of Biomass from Elemental Analysis Using Available Electron Concepts," Snehal A. Patel, Kansas State University "Design of a Wheat Straw to Ethanol Conversion Facility," Michael M. Meagher, Colorado State University "Effects of Salt, Heat, and Physical Form on the Fermentation of Bananas," Carl Drewel, University of Missouri–Columbia "Gas Hold-up in the Downflow Section of a Split Cylinder Airlift Column," Vasanti Deshpande, Kansas State University "Measurement of Michaelis Constants for Soluble and Immobilized Glucoamylase," Robert A. Lesch, Iowa State University "Kinetics of Alkaline Oxidation and Degradation of Sugars," Alfred R. Fratzke, Iowa State University "Stability of Cereal Protein During Microbial Growth on Grain Dust," Bamidele O. Solomon, Kansas State University