A general methodology for calculating mixed mode stress intensity factors and fracture toughness of solder joints with interfacial cracks

Solder joints in electronic packages undergo thermo-mechanical cycling, resulting in nucleation of micro-cracks, especially at the solder/bond-pad interface, which may lead to fracture of the joints. The fracture toughness of a solder joint depends on material properties, process conditions and service history, as well as strain rate and mode-mixity. This paper reports on a methodology for determining the mixed-mode fracture toughness of solder joints with an interfacial starter-crack, using a modified compact mixed mode (CMM) specimen containing an adhesive joint. Expressions for stress intensity factor (K) and strain energy release rate (G) are developed, using a combination of experiments and finite element (FE) analysis. In this methodology, crack length dependent geometry factors to convert for the modified CMM sample are first obtained via the crack-tip opening displacement (CTOD)-based linear extrapolation method to calculate the under far-field mode I and II conditions (f(1a) and f(2a)), (ii) generation of a master-plot to determine a(c), and (iii) computation of K and G to analyze the fracture behavior of joints. The developed methodology was verified using J-integral calculations, and was also used to calculate experimental fracture toughness values of a few lead-free solder-Cu joints. (C) 2014 Elsevier Ltd. All rights reserved.

The Uniform World Model: A Methodology for Predicting the Health Impacts of Air Pollution

47 p.

Social Work in the Republic of Ireland: A History of the Present

This article reports on research carried out into the nature and position of social work in the child protection and welfare system in Ireland. Employing a methodology of a history of the present, this research sought to crtically examine the nature and position of social work within the social as a 'psy expert'. Selected findings relating to the genealogical and archaeological construction of social work discourse in Ireland are provided to illuminate how its particular historical pathways both enabled and constrained its development. It was found that, to some extent, conceptualizations of social work in the context of its space within the social were applicable to the Irish context. however, it was also found that a number of other factors were also significant, implying the need for problematization of existing theories of the social. Although some of the findings relate directly to the particular spatial context of Ireland, others are transferable to the UK and international contexts. The research asserts that, while social work represents a diffuse and complex activity, enabled and constrained by its genealogical context, the potential exists in the profesion for greater attention to be apid to its archaeoloigcal construction. In light of contemporary neo-liberal conditions of governance, the need for such attention is emphasized.

Influence of test methodology and probe geometry on nanoscale fatigue mechanisms of diamond-like carbon thin film

The aim of this paper is to investigate the mechanism of nanoscale fatigue using nano-impact and multiple-loading cycle nanoindentation tests, and compare it to previously reported findings of nanoscale fatigue using integrated stiffness and depth sensing approach. Two different film loading mechanism, loading history and indenter shapes are compared to comprehend the influence of test methodology on the nanoscale fatigue failure mechanisms of DLC film. An amorphous 100 nm thick DLC film was deposited on a 500 μm silicon substrate using sputtering of graphite target in pure argon atmosphere. Nano-impact and multiple-load cycle indentations were performed in the load range of 100 μN to 1000 μN and 0.1 mN to 100 mN, respectively. Both test types were conducted using conical and Berkovich indenters. Results indicate that for the case of conical indenter, the combination of nano-impact and multiple-loading cycle nanoindentation tests provide information on the life and failure mechanism of DLC film, which is comparable to the previously reported findings using the integrated stiffness and depth sensing approach. However, the comparison of results is sensitive to the applied load, loading mechanism, test-type and probe geometry. The loading mechanism and load history is therefore critical which also leads to two different definitions of film failure. The choice of exact test methodology, load and probe geometry should therefore be dictated by the in-service tribological conditions, and where necessary both test methodologies can be used to provide better insights of failure mechanism. Molecular dynamics (MD) simulations of the elastic response of nanoindentation is reported, which indicates that the elastic modulus of the film measured using MD simulation was higher than that experimentally measured. This difference is attributed to the factors related to the presence of material defects, crystal structure, residual stress, indenter geometry and loading/unloading rate differences between the MD and experimental results.

The Routledge Guide to Interviewing: Oral History, Social Enquiry & Investigation

The Routledge Guide to Interviewing sets out a well-tested and practical approach and methodology: what works, difficulties and dangers to avoid and key questions which must be answered before you set out. Background methodological issues and arguments are considered and drawn upon but the focus is on what is ethical, legally acceptable and productive:
-Rationale (why, what for, where, how)
-Ethics and Legalities (informed consent, data protection, risks, embargoes)
-Resources (organisational, technical, intellectual)
-Preparation (selecting and approaching interviewees, background and biographical research, establishing credentials, identifying topics)
-Technique (developing expertise and confidence)
-Audio-visual interviews
-Analysis (modes, methods, difficulties)
-Storage (archiving and long-term preservation)
-Sharing Resources (dissemination and development)

From death row to the mansion of a head of state, small kitchens and front parlours, to legislatures and presbyteries, Anna Bryson and Seán McConville’s wide interviewing experience has been condensed into this book. The material set out here has been acquired by trial, error and reflection over a period of more than four decades. The interviewees have ranged from the delightfully straightforward to the painfully difficult to the near impossible – with a sprinkling of those that were impossible.
Successful interviewing draws on the survival skills of everyday life. This guide will help you to adapt, develop and apply these innate skills. Including a range of useful information such as sample waivers, internet resources, useful hints and checklists, it provides sound and plain-speaking support for the oral historian, social scientist and investigator.

Information sources selection methodology for recommender systems based on intrinsic characteristics and trust measure

El treball desenvolupat en aquesta tesi presenta un profund estudi i proveïx solucions innovadores en el camp dels sistemes recomanadors. Els mètodes que usen aquests sistemes per a realitzar les recomanacions, mètodes com el Filtrat Basat en Continguts (FBC), el Filtrat Col·laboratiu (FC) i el Filtrat Basat en Coneixement (FBC), requereixen informació dels usuaris per a predir les preferències per certs productes. Aquesta informació pot ser demogràfica (Gènere, edat, adreça, etc), o avaluacions donades sobre algun producte que van comprar en el passat o informació sobre els seus interessos. Existeixen dues formes d'obtenir aquesta informació: els usuaris ofereixen explícitament aquesta informació o el sistema pot adquirir la informació implícita disponible en les transaccions o historial de recerca dels usuaris. Per exemple, el sistema recomanador de pel·lícules MovieLens (http://movielens.umn.edu/login) demana als usuaris que avaluïn almenys 15 pel·lícules dintre d'una escala de * a * * * * * (horrible, ...., ha de ser vista). El sistema genera recomanacions sobre la base d'aquestes avaluacions. Quan els usuaris no estan registrat en el sistema i aquest no té informació d'ells, alguns sistemes realitzen les recomanacions tenint en compte l'historial de navegació. Amazon.com (http://www.amazon.com) realitza les recomanacions tenint en compte les recerques que un usuari a fet o recomana el producte més venut. No obstant això, aquests sistemes pateixen de certa falta d'informació. Aquest problema és generalment resolt amb l'adquisició d'informació addicional, se li pregunta als usuaris sobre els seus interessos o es cerca aquesta informació en fonts addicionals. La solució proposada en aquesta tesi és buscar aquesta informació en diverses fonts, específicament aquelles que contenen informació implícita sobre les preferències dels usuaris. Aquestes fonts poden ser estructurades com les bases de dades amb informació de compres o poden ser no estructurades com les pàgines web on els usuaris deixen la seva opinió sobre algun producte que van comprar o posseïxen. Nosaltres trobem tres problemes fonamentals per a aconseguir aquest objectiu: 1 . La identificació de fonts amb informació idònia per als sistemes recomanadors. 2 . La definició de criteris que permetin la comparança i selecció de les fonts més idònies. 3 . La recuperació d'informació de fonts no estructurades. En aquest sentit, en la tesi proposada s'ha desenvolupat: 1 . Una metodologia que permet la identificació i selecció de les fonts més idònies. Criteris basats en les característiques de les fonts i una mesura de confiança han estat utilitzats per a resoldre el problema de la identificació i selecció de les fonts. 2 . Un mecanisme per a recuperar la informació no estructurada dels usuaris disponible en la web. Tècniques de Text Mining i ontologies s'han utilitzat per a extreure informació i estructurar-la apropiadament perquè la utilitzin els recomanadors. Les contribucions del treball desenvolupat en aquesta tesi doctoral són: 1. Definició d'un conjunt de característiques per a classificar fonts rellevants per als sistemes recomanadors 2. Desenvolupament d'una mesura de rellevància de les fonts calculada sobre la base de les característiques definides 3. Aplicació d'una mesura de confiança per a obtenir les fonts més fiables. La confiança es definida des de la perspectiva de millora de la recomanació, una font fiable és aquella que permet millorar les recomanacions. 4. Desenvolupament d'un algorisme per a seleccionar, des d'un conjunt de fonts possibles, les més rellevants i fiable utilitzant les mitjanes esmentades en els punts previs. 5. Definició d'una ontologia per a estructurar la informació sobre les preferències dels usuaris que estan disponibles en Internet. 6. Creació d'un procés de mapatge que extreu automàticament informació de les preferències dels usuaris disponibles en la web i posa aquesta informació dintre de l'ontologia. Aquestes contribucions permeten aconseguir dos objectius importants: 1 . Millorament de les recomanacions usant fonts d'informació alternatives que sigui rellevants i fiables. 2 . Obtenir informació implícita dels usuaris disponible en Internet.

In vitro cumulative gas production techniques: History, methodological considerations and challenges

Methodology used to measure in vitro gas production is reviewed to determine impacts of sources of variation on resultant gas production profiles (GPP). Current methods include measurement of gas production at constant pressure (e.g., use of gas tight syringes), a system that is inexpensive, but may be less sensitive than others thereby affecting its suitability in some situations. Automated systems that measure gas production at constant volume allow pressure to accumulate in the bottle, which is recorded at different times to produce a GPP, and may result in sufficiently high pressure that solubility of evolved gases in the medium is affected, thereby resulting in a recorded volume of gas that is lower than that predicted from stoichiometric calculations. Several other methods measure gas production at constant pressure and volume with either pressure transducers or sensors, and these may be manual, semi-automated or fully automated in operation. In these systems, gas is released as pressure increases, and vented gas is recorded. Agitating the medium does not consistently produce more gas with automated systems, and little or no effect of agitation was observed with manual systems. The apparatus affects GPP, but mathematical manipulation may enable effects of apparatus to be removed. The amount of substrate affects the volume of gas produced, but not rate of gas production, provided there is sufficient buffering capacity in the medium. Systems that use a very small amount of substrate are prone to experimental error in sample weighing. Effect of sample preparation on GPP has been found to be important, but further research is required to determine the optimum preparation that mimics animal chewing. Inoculum is the single largest source of variation in measuring GPP, as rumen fluid is variable and sampling schedules, diets fed to donor animals and ratios of rumen fluid/medium must be selected such that microbial activity is sufficiently high that it does not affect rate and extent of fermentation. Species of donor animal may also cause differences in GPP. End point measures can be mathematically manipulated to account for species differences, but rates of fermentation are not related. Other sources of inocula that have been used include caecal fluid (primarily for investigating hindgut fermentation in monogastrics), effluent from simulated rumen fermentation (e.g., 'Rusitec', which was as variable as rumen fluid), faeces, and frozen or freeze-dried rumen fluid (which were both less active than fresh rumen fluid). Use of mixtures of cell-free enzymes, or pure cultures of bacteria, may be a way of increasing GPP reproducibility, while reducing reliance on surgically modified animals. However, more research is required to develop these inocula. A number of media have been developed which buffer the incubation and provide relevant micro-nutrients to the microorganisms. To date, little research has been completed on relationships between the composition of the medium and measured GPP. However, comparing GPP from media either rich in N or N-free, allows assessment of contributions of N containing compounds in the sample. (c) 2005 Published by Elsevier B.V.

The first 10 years of accounting history as an international refereed journal : 1996-2005

This article undertakes a content analysis of publications in the first 10 years of the new series of the journal Accounting History. In so doing, it adds to the prior literature examining publishing patterns in the accounting history discipline. The article commences by providing an historical background to the introduction of the new series and the journal's editorial team. This is followed by a content analysis of the journal's research publications. This analysis examines patterns of authorship, the journal's most published authors, institutional and geographical affiliations of authors, author gender and article classifications.

Learning from history : social movements, arts and crafts and anti-consumption

Contemplating the lCAR Agenda, I wondered what value was to be found in history and is historical research an appropriate methodology for this contemporary discussion? I reviewed articles from social sciences and marketing literature that discuss history as a research methodology and present some of the criticisms and benefits. Social movements like the Arts and Crafts contain themes and agendas that resonate today, including protest and boycott, sustainable solutions, and technophobia that can be found in contemporary crafts movements like Stitch'nBitch. Researchers, heeding some cautions, can use history to build agendas that contribute directly to the study of anti consumption

Hair braiding : working the boundaries of methodology in globalisation research

This paper engages the constitutive as well as the representative role of metaphor in research. Metaphors are understood to provide possibilities for representations and conceptualisations. The use of metaphorical redescription permits us to 'use familiar words in unfamiliar ways' (Rorty, 1989, p. 18) and provides new language that deters the use of repeated ways of knowing. It invites us to see things differently and to act differently. Lakoff and Johnson (1980) argue that metaphor does more than represent: 'New metaphors have the power to construct a new reality' (p. 145). I have drawn on both these understandings of metaphor. In qualitative research, metaphorical analysis has a well-established history. Researchers analyse metaphors used by research participants and apply metaphors to participant actions and understandings (Koro-Ljungberg, 2001; Gregory & Noblit, 1998). Researchers also use metaphors to reflect or represent their methodological decision-making (Richardson, 2003; Gadamer, 1989). In this article, I have nudged the conceptual boundaries of methodology. I have argued the constructive nature of metaphor in methodological positioning and decision making. I use the writing of a doctoral thesis to argue this role of metaphor. There, the metaphor of hair braiding constructed and communicated my methodological decision-making and my researcher stance as a braider.

Event studies : a methodology review

Originally developed as a statistical tool for empirical research in accounting and finance, event studies have since migrated to other disciplines as well, including economics, history, law, management, marketing, and political science. Despite the elegant simplicity of a standard event study, variations in methodology and their relative merits continue to attract attention in the literature. This paper reviews some of the fundamental topics in short-term event study methodology, with an attempt to add new perspectives to some pressing topics.

Teaching Chinese history : the issue of approach

In China, the study of history has never been a detached academic pursuit, as it has always been indistinguishable from political directions. Chinese political leaders have been unable to adopt a disinterested approach towards history, be it distant or contemporary. On the other hand, Western historians interpret Chinese history from their own point of view, and they often view Chinese history as an extension of Western history. Often, they have been preoccupied with the concern to explain or justify their own record or involvement rather than to produce an objective account, especially in regard to the late nineteenth and early twentieth centuries’ history of China. This study questions the conventional approach to China’s past, be that of a Confucian, a Communist or a Western ethnocentric historiographer. It explores the possibility of establishing a “Chinese experience-based” approach while maintaining “impartiality and neutrality”, looking to historical studies outside of China to achieve this.

A brief history of Brazil's growth

The paper studies Brazil’s economic growth and begins with a brief overview of events that marked the country’s development from her discovery to the 19th century. It then divides the years between 1900 and 2008 into four periods. The breaks in regime occur in 1918, 1967 and 1980, according to the methodology created by Bai and Perron (1998, 2003). The use of the accounting methodology serves the analysis of the behavior of productivity in the previously identified different phases of the post-World War II period. High inflation might have been a reason for the decline in productivity observed between 1980 and mid-1990s. The paper shows that terms of trade have a significant effect on economic growth and output fluctuations. Other factors (such as fiscal stimulus or easy access to foreign finance) also matter for output accelerations in the short run. From 2004 to 2008, terms of trade improvement and debt reduction brought economic progress. The emergence of a new era in this millennium will depend on wiser fiscal policies than those of the past.

Hung Out to Dry: Choice of Priority Ecoregions for Conserving Threatened Neotropical Anurans Depends on Life-History Traits

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Alpha-glucosidase promotes hemozoin formation in a blood-sucking bug: An evolutionary history

Background: Hematophagous insects digest large amounts of host hemoglobin and release heme inside their guts. In Rhodnius prolixus, hemoglobin-derived heme is detoxified by biomineralization, forming hemozoin (Hz). Recently, the involvement of the R. prolixus perimicrovillar membranes in Hz formation was demonstrated. Methodology/Principal Findings: Hz formation activity of an α-glucosidase was investigated. Hz formation was inhibited by specific α-glucosidase inhibitors. Moreover, Hz formation was sensitive to inhibition by Diethypyrocarbonate, suggesting a critical role of histidine residues in enzyme activity. Additionally, a polyclonal antibody raised against a phytophagous insect α-glucosidase was able to inhibit Hz formation. The α-glucosidase inhibitors have had no effects when used 10 h after the start of reaction, suggesting that α-glucosidase should act in the nucleation step of Hz formation. Hz formation was seen to be dependent on the substrate-binding site of enzyme, in a way that maltose, an enzyme substrate, blocks such activity. dsRNA, constructed using the sequence of α-glucosidase gene, was injected into R. prolixus females' hemocoel. Gene silencing was accomplished by reduction of both α-glucosidase and Hz formation activities. Insects were fed on plasma or hemin-enriched plasma and gene expression and activity of α-glucosidase were higher in the plasma plus hemin-fed insects. The deduced amino acid sequence of α-glucosidase shows a high similarity to the insect α-glucosidases, with critical histidine and aspartic residues conserved among the enzymes. Conclusions/Significance: Herein the Hz formation is shown to be associated to an a-glucosidase, the biochemical marker from Hemipteran perimicrovillar membranes. Usually, these enzymes catalyze the hydrolysis of glycosidic bond. The results strongly suggest that α-glucosidase is responsible for Hz nucleation in the R. prolixus midgut, indicating that the plasticity of this enzyme may play an important role in conferring fitness to hemipteran hematophagy, for instance. © 2009 Mury et al.