Sub-crestal positioning of implants results in higher bony crest resorption: an experimental study in dogs

To compare peri-implant soft- and hard-tissue integration at implants installed juxta- or sub-crestally. Furthermore, differences in the hard and soft peri-implant tissue dimensions at sites prepared with drills or sonic instruments were to be evaluated. Three months after tooth extraction in six dogs, recipient sites were prepared in both sides of the mandible using conventional drills or a sonic device (Sonosurgery(®) ). Two implants with a 1.7-mm high-polished neck were installed, one with the rough/smooth surface interface placed at the level of the buccal bony crest (control) and the second placed 1.3 mm deeper (test). After 8 weeks of non-submerged healing, biopsies were harvested and ground sections prepared for histological evaluation. The buccal distances between the abutment/fixture junction (AF) and the most coronal level of osseointegration (B) were 1.6 ± 0.6 and 2.4 ± 0.4 mm; between AF and the top of the bony crest (C), they were 1.4 ± 0.4 and 2.2 ± 0.2 mm at the test and control sites, respectively. The top of the peri-implant mucosa (PM) was located more coronally at the test (1.2 ± 0.6 mm) compared to the control sites (0.6 ± 0.5 mm). However, when the original position of the bony crest was taken into account, a higher bone loss and a more apical position of the peri-implant mucosa resulted at the test sites. The placement of implants into a sub-crestal location resulted in a higher vertical buccal bone resorption and a more apical position of the peri-implant mucosa in relation to the level of the bony crest at implant installation. Moreover, peri-implant hard-tissue dimensions were similar at sites prepared with either drills or Sonosurgery(®) .

Cone Beam Computed Tomographic Evaluation of a Maxillary Alveolar Ridge Reconstruction With Iliac Crest Graft and Implants

The present article discusses an atrophic maxilla reconstruction with iliac crest bone block and particulate grafts and dental implants. Onlay block grafts were used to restore bone volume of the anterior maxilla, whereas bilateral sinus floor augmentation was performed using a particulate graft. Ten months after the grafting surgery, 9 dental implants were placed to rehabilitate the case. Results of a 7-year follow-up were obtained clinically and by cone beam computed tomographic images.

The cytoplasmic domain of the ligand ephrinB2 is required for vascular morphogenesis but not cranial neural crest migration

The transmembrane ligand ephrinB2 and its cognate Eph receptor tyrosine kinases are important regulators of vascular morphogenesis. EphrinB2 may have an active signaling role, resulting in bi-directional signal transduction downstream of both ephrinB2 and Eph receptors. To separate the ligand and receptor-like functions of ephrinB2 in mice, we replaced the endogenous gene by cDNAs encoding either carboxyterminally truncated (ephrinB2(DeltaC)) or, as a control, full-length ligand (ephrinB2(WT)). While homozygous ephrinB2(WT/WT) animals were viable and fertile, loss of the ephrinB2 cytoplasmic domain resulted in midgestation lethality similar to ephrinB2 null mutants (ephrinB2(KO)). The truncated ligand was sufficient to restore guidance of migrating cranial neural crest cells, but ephrinB2(DeltaC/DeltaC) embryos showed defects in vasculogenesis and angiogenesis very similar to those observed in ephrinB2(KO/KO) animals. Our results indicate distinct requirements of functions mediated by the ephrinB carboxyterminus for developmental processes in the vertebrate embryo.

A novel role for neural crest cells in thymus organogenesis

Classical ablation studies have shown that neural crest cells (NCC) are critical for thymus organogenesis, though their role in this process has never been determined. We have used a mouse model deficient in NCC near the thymus rudiment to investigate the role of NCC in thymus organogenesis. Splotch mice exhibit a lack of NCC migration due to mutation in the gene encoding the transcription factor Pax 3. Homozygous mutants, designated Pax3Sp/Sp, display a range of phenotypes including spina bifida, cardiac outflow tract deformities, and craniofacial deformities. Pax3Sp/Sp, mice have also been reported to have hypoplastic and abnormal thymi, which is consistent with the expected result based on the classical ablation studies. However, in contrast to the dogma, we find that the thymus lobes in Pax3Sp/Sp, mice are even larger in size than those of littermate controls, although they fail to migrate and are therefore ectopic. Differentiation of the thymic epithelial compartments occurs normally, including the ability to import hematopoietic precursors, until the embryos die at embryonic day E13.0. We also investigated the patterning of the third pharyngeal pouch which gives rise to both the thymus and the parathyroid. Using RNA probes to detect expression of transcription factors exclusively expressed in the ventral, thymus- or dorsal, parathyroidfated domains of the E11.5 third pouch, we show that the parathyroid domain is restricted and the thymus-fated domain is expanded in Pax3Sp/Sp, embryos. Furthermore, mixing of the boundary between these domains occurs at E12.0. These results necessitate reconsideration of the previously accepted role for NCC in thymus organogenesis. NCC are not required for outgrowth of the thymus up to E13.0, and most strikingly, we have discovered a novel role for NCC in establishing parathyroid versus thymus fate boundaries in the third pharyngeal pouch. ^

Carbon isotopic compositions and concentrations of major fatty acids in the Beggiatoa covered sediment core at the crest of southern Hydrate Ridge

Membrane fatty acids were extracted from a sediment core above marine gas hydrates at Hydrate Ridge, NE Pacific. Anaerobic sediments from this environment are characterized by high sulfate reduction rates driven by the anaerobic oxidation of methane (AOM). The assimilation of methane carbon into bacterial biomass is indicated by carbon isotope values of specific fatty acids as low as -103 per mill. Specific fatty acids released from bacterial membranes include C 16:1 omega 5c , C 17:1 omega 6c , and cyC 17:0 omega 5,6 , all of which have been fully characterized by mass spectrometry. These unusual fatty acids continuously display the lowest d13 C values in all sediment horizons and two of them are detected in high abundance (i.e., C 16:1 omega 5c and cyC 17:0 omega 5,6 ). Combined with microscopic examination by fluorescence in situ hybridization specifically targeting sulfate-reducing bacteria (SRB) of the Desulfosarcina/Desulfococcus group, which are present in the aggregates of AOM consortia in extremely high numbers, these specific fatty acids appear to provide a phenotypic fingerprint indicative for SRB of this group. Correlating depth profiles of specific fatty acid content and aggregate number in combination with pore water sulfate data provide further evidence of this finding. Using mass balance calculations we present a cell-specific fatty acid pattern most likely displaying a very close resemblance to the still uncultured Desulfosarcina/Desulfococcus species involved in AOM.

Practical case with regard to applying the functional and environmental method to low crest level, detached breakwaters

The research work as presented in this article covers the design of detached breakwaters since they constitute a type of coastal defence work with which to combat many of the erosion problems found on beaches in a stable, sustainable fashion. The main aim of this work is to formulate a functional and environmental (but not structural) design method, enabling the fundamental characteristics of a detached breakwater to be defined as a function of the effect it is wished to induce on the coast, and taking into account variables of a different nature (climate, geomorphology and geometry) influencing the changes the shoreline undergoes after its construction. With this article, it is intended to submit the final result of the investigation undertaken, applying the detached breakwater design method as developed to solving a practical case. Thus it may be shown how the method enables a detached breakwater’s geometric pre-sizing to be tackled at a place on the coast with certain climate, geomorphology and littoral dynamic characteristics, first setting the final state of equilibrium it is wanted to obtain therein after its construction.

Extreme flood abatement in large dams with fixed-crest spillways

This study characterises the abatement effect of large dams with fixed-crest spillways under extreme design flood conditions. In contrast to previous studies using specific hydrographs for flow into the reservoir and simplifications to obtain analytical solutions, an automated tool was designed for calculations based on a Monte Carlo simulation environment, which integrates models that represent the different physical processes in watersheds with areas of 150?2000 km2. The tool was applied to 21 sites that were uniformly distributed throughout continental Spain, with 105 fixed-crest dam configurations. This tool allowed a set of hydrographs to be obtained as an approximation for the hydrological forcing of a dam and the characterisation of the response of the dam to this forcing. For all cases studied, we obtained a strong linear correlation between the peak flow entering the reservoir and the peak flow discharged by the dam, and a simple general procedure was proposed to characterise the peak-flow attenuation behaviour of the reservoir. Additionally, two dimensionless coefficients were defined to relate the variables governing both the generation of the flood and its abatement in the reservoir. Using these coefficients, a model was defined to allow for the estimation of the flood abatement effect of a reservoir based on the available information. This model should be useful in the hydrological design of spillways and the evaluation of the hydrological safety of dams. Finally, the proposed procedure and model were evaluated and representative applications were presented

Functional and environmental design of detached, low crest level breakwaters

In this article we research the design of detached breakwaters, a type of coastal defence work designed to combat erosion on beaches in a stable, sustainable fashion. Our aim is to formulate a functional and environmental (nonstructural) method of design that defines the fundamental characteristics of a detached breakwater as a function of the desired effect on the coast whilst meeting social demands and preserving or improving the quality of the littoral environment. We aim to make this method generally applicable by considering relations between variables of different natures (climatic, geomorphologic, and geometric) influencing the changes experienced on the coast after the detached breakwater has been built. We carried out the study of the relations between the different variables on the data from 19 actual, existing detached breakwaters on the Spanish Mediterranean coastline, and we followed a methodology based on the implementation of nondimensional monomials and on a search for relations of dependency between them. Finally, we discussed the results obtained and came up with a proposal for a design method that uses some of the graphic relations found between the variables studied and that achieves the main objective. For example, a case of a detached breakwater’s geometric presizing is solved as a practical demonstration of how the method is applied. La investigación que se presenta en este artículo aborda el diseño de los diques exentos, por constituir estos un tipo de obras de defensa costera con el que poder luchar de una forma estable y sostenible contra muchos de los problemas de erosión que existen en las playas. El objetivo principal de este trabajo es la formulación de un método de diseño funcional y ambiental (no estructural) que permita definir las características fundamentales de un dique exento en función del efecto que se quiera inducir en la costa, satisfaciendo las demandas sociales y preservando o mejorando la calidad del medio ambiente litoral. Además, se busca la aplicabilidad general del método mediante la consideración de relaciones entre variables de distinta naturaleza (climáticas, geomorfológicas y geométricas) que tienen influencia en los cambios que se experimentan en la costa tras la construcción del dique exento. El estudio de las relaciones entre las distintas variables se realiza sobre los datos de una base de diecinueve diques exentos reales, existentes en el litoral mediterráneo español, y sigue una metodología basada en el planteamiento de monomios adimensionales y en la búsqueda de relaciones de dependencia entre ellos. Finalmente, la discusión de los resultados obtenidos conduce a la propuesta de un método de diseño que utiliza algunas de las relaciones graficas encontradas entre las variables estudiadas y con el que se consigue el objetivo principal anteriormente expuesto. Para demostrar la aplicación práctica del método se resuelve un caso de predimensionamiento geométrico de un dique exento a modo de ejemplo.

Hazel McDaniel Teabeau

Hazel McDaniel Teabeau was born in Arkansas in 1892, and she received her BA in English from the University of Kansas in 1915. Her interest in social causes and concern for civil rights are prevalent in her accomplishments. In 1937, she joined the Lincoln University English Department faculty, where she taught for twenty years. While on sabbatical from Lincoln University, Teabeau became the first black woman to enroll at the University of Missouri. She enrolled there at the age of 57 to seek a PhD in Speech and Dramatics, and in 1959 she became the first black woman to receive a doctorate from the University of Missouri.

Integration of multiple instructive cues by neural crest stem cells reveals cell-intrinsic biases in relative growth factor responsiveness

Growth factors can influence lineage determination of neural crest stem cells (NCSCs) in an instructive manner, in vitro. Because NCSCs are likely exposed to multiple signals in vivo, these findings raise the question of how stem cells would integrate such combined influences. Bone morphogenetic protein 2 (BMP2) promotes neuronal differentiation and glial growth factor 2 (GGF2) promotes glial differentiation; if NCSCs are exposed to saturating concentrations of both factors, BMP2 appears dominant. By contrast, if the cells are exposed to saturating concentrations of both BMP2 and transforming growth factor β1 (which promotes smooth muscle differentiation), the two factors appear codominant. Sequential addition experiments indicate that NCSCs require 48–96 hrs in GGF2 before they commit to a glial fate, whereas the cells commit to a smooth muscle fate within 24 hr in transforming growth factor β1. The delayed response to GGF2 does not reflect a lack of functional receptors; however, because the growth factor induces rapid mitogen-activated protein kinase phosphorylation in naive cells. Furthermore, GGF2 can attenuate induction of the neurogenic transcription factor mammalian achaete-scute homolog 1, by low doses of BMP2. This short-term antineurogenic influence of GGF2 is not sufficient for glial lineage commitment, however. These data imply that NCSCs exhibit cell-intrinsic biases in the timing and relative dosage sensitivity of their responses to instructive factors that influence the outcome of lineage decisions in the presence of multiple factors. The relative delay in glial lineage commitment, moreover, apparently reflects successive short-term and longer-term actions of GGF2. Such a delay may help to explain why glia normally differentiate after neurons, in vivo.

Xenopus Zic3, a primary regulator both in neural and neural crest development

Xenopus Zic3 is a Xenopus homologue of mouse Zic and Drosophila pair-rule gene, odd-paired. We show here that Zic3 has significant roles both in neural and neural crest development in Xenopus embryo. Expression of Zic3 is first detected in prospective neural plate region at gastrulation. Onset of the expression was earlier than most proneural genes and followed chordin expression. The expression was induced by blockade of BMP4 signal. Overexpression of Zic3 resulted in hyperplastic neural and neural crest derived tissue. In animal cap explant, the overexpression of Zic3 induced expression of all the proneural genes and neural crest marker genes. These findings suggest that Zic3 can determine the ectodermal cell fate and promote the earliest step of neural and neural crest development.

Glial cell line-derived neurotrophic factor promotes the development of adrenergic neurons in mouse neural crest cultures

Growth of mouse neural crest cultures in the presence of glial cell line-derived neurotrophic factor (GDNF) resulted in a dramatic dose-dependent increase in the number of tyrosine hydroxylase (TH)-positive cells that developed when 5% chicken embryo extract was present in the medium. In contrast, growth in the presence of bone morphogenetic protein (BMP)-2, BMP-4, BMP-6, transforming growth factor (TGF) β1, TGF-β2, and TGF-β3 elicited no increase in the number of TH-positive cells. The TH-positive cells that developed in the presence of GDNF had neuronal morphology and contained the middle and low molecular weight neurofilament proteins. Numerous TH-negative cells with the morphology of neurons also were observed in GDNF-treated cultures. Analysis revealed that the period from 6 to 12 days in vitro was the critical time for exposure to GDNF to generate the increase in TH-positive cell number. The growth factors neurotrophin-3 and fibroblast growth factor-2 elicited increases in the number of TH-positive cells similar to that seen in response to GDNF. In contrast, nerve growth factor was unable to substitute for GDNF. These findings extend the previously reported biological activities of GDNF by showing that it can act on mouse neural crest cultures to promote the development of neurons.