Induced higher-order aberrations after laser in situ keratomileusis (LASIK) performed with wavefront-guided IntraLase femtosecond laser in moderate to high astigmatism

Background Wavefront-guided Laser-assisted in situ keratomileusis (LASIK) is a widespread and effective surgical treatment for myopia and astigmatic correction but whether it induces higher-order aberrations remains controversial. The study was designed to evaluate the changes in higher-order aberrations after wavefront-guided ablation with IntraLase femtosecond laser in moderate to high astigmatism. Methods Twenty-three eyes of 15 patients with moderate to high astigmatism (mean cylinder, −3.22 ± 0.59 dioptres) aged between 19 and 35 years (mean age, 25.6 ± 4.9 years) were included in this prospective study. Subjects with cylinder ≥ 1.5 and ≤2.75 D were classified as moderate astigmatism while high astigmatism was ≥3.00 D. All patients underwent a femtosecond laser–enabled (150-kHz IntraLase iFS; Abbott Medical Optics Inc) wavefront-guided ablation. Uncorrected (UDVA), corrected (CDVA) distance visual acuity in logMAR, keratometry, central corneal thickness (CCT) and higher-order aberrations (HOAs) over a 6 mm pupil, were assessed before and 6 months, postoperatively. The relationship between postoperative change in HOA and preoperative mean spherical equivalent refraction, mean astigmatism, and postoperative CCT were tested. Results At the last follow-up, the mean UDVA was increased (P < 0.0001) but CDVA remained unchanged (P = 0.48) and no eyes lost ≥2 lines of CDVA. Mean spherical equivalent refraction was reduced (P < 0.0001) and was within ±0.50 D range in 61 % of eyes. The average corneal curvature was flatter by 4 D and CCT was reduced by 83 μm (P < 0.0001, for all), postoperatively. Coma aberrations remained unchanged (P = 0.07) while the change in trefoil (P = 0.047) postoperatively, was not clinically significant. The 4th order HOAs (spherical aberration and secondary astigmatism) and the HOA root mean square (RMS) increased from −0.18 ± 0.07 μm, 0.04 ± 0.03 μm and 0.47 ± 0.11 μm, preoperatively, to 0.33 ± 0.19 μm (P = 0.004), 0.21 ± 0.09 μm (P < 0.0001) and 0.77 ± 0.27 μm (P < 0.0001), six months postoperatively. The change in spherical aberration after the procedure increased with an increase in the degree of preoperative myopia. Conclusions Wavefront-guided IntraLASIK offers a safe and effective option for vision and visual function improvement in astigmatism. Although, reduction of HOA is possible in a few eyes, spherical-like aberrations are increased in majority of the treated eyes.

Experimental Investigation on Switching Characteristics of High-Current Insulated Gate Bipolar Transistors at Low Currents

Insulated gate bipolar transistors (IGBTs) are used in high-power voltage-source converters rated up to hundreds of kilowatts or even a few megawatts. Knowledge of device switching characteristics is required for reliable design and operation of the converters. Switching characteristics are studied widely at high current levels, and corresponding data are available in datasheets. But the devices in a converter also switch low currents close to the zero crossings of the line currents. Further, the switching behaviour under these conditions could significantly influence the output waveform quality including zero crossover distortion. Hence, the switching characteristics of high-current IGBTs (300-A and 75-A IGBT modules) at low load current magnitudes are investigated experimentally in this paper. The collector current, gate-emitter voltage and collector-emitter voltage are measured at various low values of current (less than 10% of the device rated current). A specially designed in-house constructed coaxial current transformer (CCT) is used for device current measurement without increasing the loop inductance in the power circuit. Experimental results show that the device voltage rise time increases significantly during turn-off transitions at low currents.

Polymorphism in cocrystals of urea:4,4 `-bipyridine and salicylic acid:4,4 `-bipyridine

Polymorphic cocrystals of urea:4,4'-bipyridine and salicylic acid: 4,4'-bipyridine were obtained by crystallization from different solvents. The urea tape is a rare phenomenon in cocrystals but it is consistent in urea:4,4'-bipyridine polymorphic cocrystals. The polymorph obtained from MeCN has symmetrical N-H...N hydrogen bond distances on either side of the urea tape. However, the other form obtained from MeOH has unsymmetrical N-H...N hydrogen bond lengths. In the polymorphic cocrystals of salicylic acid:4,4'-bipyridine, the basic supramolecular synthon acid-pyridine is the same but the 3D packing is different. Both the polymorphic pairs of cocrystals come under the category of packing polymorphs. All polymorphs were characterized by single-crystal X-ray diffraction (SCXRD), PXRD, DSC, FT-IR and HSM. N-H...N and the acid-pyridine supramolecular synthons were insulated by FT-IR vibrational spectroscopy.

Experimental Investigation on Switching Characteristics of High-Current Insulated Gate Bipolar Transistors at Low Currents

Insulated gate bipolar transistors (IGBTs) are used in high-power voltage-source converters rated up to hundreds of kilowatts or even a few megawatts. Knowledge of device switching characteristics is required for reliable design and operation of the converters. Switching characteristics are studied widely at high current levels, and corresponding data are available in datasheets. But the devices in a converter also switch low currents close to the zero crossings of the line currents. Further, the switching behaviour under these conditions could significantly influence the output waveform quality including zero crossover distortion. Hence, the switching characteristics of high-current IGBTs (300-A and 75-A IGBT modules) at low load current magnitudes are investigated experimentally in this paper. The collector current, gate-emitter voltage and collector-emitter voltage are measured at various low values of current (less than 10% of the device rated current). A specially designed in-house constructed coaxial current transformer (CCT) is used for device current measurement without increasing the loop inductance in the power circuit. Experimental results show that the device voltage rise time increases significantly during turn-off transitions at low currents.

State Transition Based Embedding in Cepstrum Domain for Audio Copyright Protection

In this paper, we propose a new state transition based embedding (STBE) technique for audio watermarking with high fidelity. Furthermore, we propose a new correlation based encoding (CBE) scheme for binary logo image in order to enhance the payload capacity. The result of CBE is also compared with standard run-length encoding (RLE) compression and Huffman schemes. Most of the watermarking algorithms are based on modulating selected transform domain feature of an audio segment in order to embed given watermark bit. In the proposed STBE method instead of modulating feature of each and every segment to embed data, our aim is to retain the default value of this feature for most of the segments. Thus, a high quality of watermarked audio is maintained. Here, the difference between the mean values (Mdiff) of insignificant complex cepstrum transform (CCT) coefficients of down-sampled subsets is selected as a robust feature for embedding. Mdiff values of the frames are changed only when certain conditions are met. Hence, almost 50% of the times, segments are not changed and still STBE can convey watermark information at receiver side. STBE also exhibits a partial restoration feature by which the watermarked audio can be restored partially after extraction of the watermark at detector side. The psychoacoustic model analysis showed that the noise-masking ratio (NMR) of our system is less than -10dB. As amplitude scaling in time domain does not affect selected insignificant CCT coefficients, strong invariance towards amplitude scaling attacks is also proved theoretically. Experimental results reveal that the proposed watermarking scheme maintains high audio quality and are simultaneously robust to general attacks like MP3 compression, amplitude scaling, additive noise, re-quantization, etc.

One pot auto-ignition based synthesis of novel Sr2CeO4: Ho3+ nanophosphor for photoluminescent applications

Ho3+ (0.25-7 mol%) doped Sr2CeO4 nanophosphors were synthesized by solution combustion method using urea as fuel. The structural properties of the nanophosphors were investigated by powder X-ray diffraction studies (PXRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. UV-Visible and photoluminescence (PL) spectroscopic techniques were used for analysing the optical properties of the nanoparticles. PXRD and TEM results revealed the formation of Sr2CeO4: Ho3+ nanocrystalline particles with orthorhombic crystal structure. From the UV-Vis studies the optical band gap energy found to decrease from 5.9 to 5.74 eV with increase in dopant concentration. The PL spectra exhibit the broad excitation band from 200 to 400 nm which concurs well with the commercial near UV LED. The PL spectra vary with the dopant content due to energy transfer from the host to the activator. In this present work we demonstrate that color tuning of phosphor can be achieved by merely varying the Ho3+ ions concentration. The CIE and CCT chromaticity coordinates suggests Sr2CeO4: Ho3+ nanophosphors may be potentially applicable as promising single - phased phosphors for lighting applications. (C) 2015 Elsevier B.V. All rights reserved.

Experimental characterisation and performance evaluation of a coaxial current transformer for measurement of insulated gate bipolar transistor switching current

Measurement of device current during switching characterisation of an insulated gate bipolar transistor (IGBT) requires a current sensor with low insertion impedance and high bandwidth. This study presents an experimental procedure for evaluating the performance of a coaxial current transformer (CCT), designed for the above purpose. A prototype CCT, which can be mounted directly on a power terminal of a 1200 V/50 A half-bridge IGBT module, is characterised experimentally. The measured characteristics include insertion impedance, gain and phase of the CCT at different frequencies. The bounds of linearity within which the CCT can operate without saturation are determined theoretically, and are also verified experimentally. The experimental study on linearity of the CCT requires a high-amplitude current source. A proportional-resonant (PR) controller-based current-controlled half-bridge inverter is developed for this purpose. A systematic procedure for selection of PR controller parameters is also reported in this study. This set-up is helpful to determine the limit of linearity and also to measure the frequency response of the CCT at realistic amplitudes of current in the low-frequency range.

Estimación de la capacidad de carga turística de la Reserva Natural Volcán Mombacho, Granada, Nicaragua

Este estudio identifica los principales factores que inciden en la determinación de la CCT de los senderos El Cráter, El Puma y El Cafetal de la Reserva Natural Volcán Mombacho. La Capacidad de carga turística se consideró tal y como propone Cifuentes en su metodología, en tres niveles: Capacidad de Carga Física (CCF), Capacidad de Carga Real (CCR) y Capacidad de Carga Efectiva (CCE) (Cifuentes, M. 1999). Se estimó la Capacidad de Manejo (CM) de la RNVM, en 74.24%, obteniendo en el sendero El Cráter una CCE de 442 visitas/día, en el sendero El Puma de 93 visitas/día, y en el sendero El Cafetal de 753 visitas/día. Si se lograse un incremento de la CM en un 80%; el sendero El Cráter in crementaría su CCE a 476 visitas/día; el sendero El Puma a 101 visitas/día; y el sendero El Cafetal a 811 visitas/día. Este escenario está calculado para visitantes con propósitos eco turísticos. Debido a que las visitas de estudiantes de colegio, muestran un comportamiento diferente, se realizó el cálculo considerando dichos elementos en los factores de corrección para los Sendero El Cráter y El Cafetal (El Puma no es frecuentado por estudiantes de colegio). La CCE para estudiantes en el sendero El Cráter fue de 236 visitas/día, con una CM del 74.24%, y para un escenario del 80% de CM se calcula en 255 visitas/día; para el sendero El Cafetal se calculó en 403 visitas/día a un 74.24% de CM y 434 visitas/día a una CM del 80%. Las visitas máximas reportadas para el año 2003 fueron en los meses de Enero y Junio, con 298 y 305 visitas/día; en el año 2002 se reportan los meses de Marzo y Mayo con 366 y 298 visitas/día; la visitación al Sendero El Cráter no excede aún la CCE calculada, no así si los visitantes fueran estudian tes de colegio. Si la tendencia de la visitación continua incrementándose con los años, se requerirá que la administración de la RNVM restringa el número de visitas en los períodos picos de las mismas.

Outorgas e renovações de rádio e tv : a radiodifusão no Senado Federal 1999-2008

Aborda a aprovação de outorgas e renovações de rádio e tv pelo Senado Federal. Investiga relatórios de comissões e da Presidência do Senado, no período de 1999 a 2008, para quantificar a aprovação de projetos de decreto legislativo sobre o assunto. Analisa os partidos políticos mais beneficiados, as regiões e os Estados mais contemplados, as categorias de outorgas e renovações mais aprovadas e o fluxo dessas matérias em períodos eleitorais. Verifica a relação entre os projetos de radiodifusão que tramitaram no Senado, no período pesquisado, e a localidade da emissora.

Development of selection methods for steels and their heat treatments

Designers who want to manufacture a hardenable steel component need to select both the steel and its heat treatment. This project aims to develop a selection methodology for steels and process routes as an aid to designers. Three studies were conducted: - production of software to calculate the "equivalent diameter" and "equivalent Jominy distance" for simple shapes of a steel component; - prediction of semi-empirical Jominy curves (as-cooled) using CCT diagrams and process modelling methods, which were validated by experiment on plain carbon steels; - investigation of tempering of Jominy bars to explore the potential for semi-empirical models for the hardness after tempering.

Accelerated and real-time creep and creep-rupture results for aramid fibers

This article presents results from conventional creep tests (CCT) and two accelerated test methods (the stepped isothermal method (SIM) and the stepped isostress method (SSM)) to determine the creep and creep-rupture behavior of two different aramid fibers, Kevlar 49 and Technora. CCT are regarded as the true behavior of the yarn, but they are impractical for long-term use where failures are expected only after many years. All the tests were carried out on the same batches of yarns, and using the same clamping arrangements, so the tests should be directly comparable. For both materials, SIM testing gives good agreement with CCT and gave stress-rupture lifetimes that followed the same trend. However, there was significant variation for SSM testing, especially when testing Technora fibers. The results indicate that Kevlar has a creep strain capacity that is almost independent of stress, whereas Technora shows a creep strain capacity that depends on stress. Its creep strain capacity is approximately two to three times that of Kevlar 49. The accelerated test methods give indirect estimates for the activation energy and the activation volume of the fibers. The activation energy for Technora is about 20% higher than that for Kevlar, meaning that it is less sensitive to the effects of increasing temperature. The activation volume for both materials was similar, and in both cases, stress dependent. Copyright © 2012 Wiley Periodicals, Inc.

Assessment of visibility restriction mechanisms for RFID data Discovery Services

RFID is a technology that enables the automated capture of observations of uniquely identified physical objects as they move through supply chains. Discovery Services provide links to repositories that have traceability information about specific physical objects. Each supply chain party publishes records to a Discovery Service to create such links and also specifies access control policies to restrict who has visibility of link information, since it is commercially sensitive and could reveal inventory levels, flow patterns, trading relationships, etc. The requirement of being able to share information on a need-to-know basis, e.g. within the specific chain of custody of an individual object, poses a particular challenge for authorization and access control, because in many supply chain situations the information owner might not have sufficient knowledge about all the companies who should be authorized to view the information, because the path taken by an individual physical object only emerges over time, rather than being fully pre-determined at the time of manufacture. This led us to consider novel approaches to delegate trust and to control access to information. This paper presents an assessment of visibility restriction mechanisms for Discovery Services capable of handling emergent object paths. We compare three approaches: enumerated access control (EAC), chain-of-communication tokens (CCT), and chain-of-trust assertions (CTA). A cost model was developed to estimate the additional cost of restricting visibility in a baseline traceability system and the estimates were used to compare the approaches and to discuss the trade-offs. © 2012 IEEE.

溪流大型底栖动物栖息地适合度模型的构建与河道内环境流量研究——以三峡库区香溪河为例

基于对香溪河河流生态系统的多年研究,以该流域河流大型底栖动物最优势类群四节蜉为指示生物,建立了我国大陆地区第一个基于长期的连续的野外现场实测数据的水生生物栖息地适合度模型(habitat suitability model,HSM).为保护河流生态系统结构和功能的完整性,文中将河道内环境流量分为3个层次,即河道内最小需水量、最小环境流量和适宜环境流量,并利用水文法和加权可利用面积法(weighted usable area,WUA)分别构建了这3个层次的河道内环境流量的计算模型.结果表明:香溪河的最小需水

聚丁二烯红外和拉曼光谱微结构分析

本工作对聚丁二烯(PBD)进行了光谱微结构分析，主要考察了三个问题。1、PBD分子链构象对PBD红外光谱的影响本工作对高顺式(c)PBD样品进行了室温和低温(25℃和-150℃)红外光谱测定，发现高顺式PBD在低温下整个光谱吸收峰大部分峰宽变窄，峰强增加，特别是738cm~(-1)峰，在低温下位移至748cm~(-1)，峰强增加一倍多。另外还观察到低温结晶态出现802和598cm~(-1)两个吸收峰，在以前文献中未曾有过报导，我们将它们归属为顺式结构结晶峰。通过计算分峰，原来738cm~(-1)峰分成两个位于742和727cm~(-1)的子峰，在低温下，两个子峰分别位移至748和735cm~(-1)，与室温时比较，两个子峰半宽都明显变小。748cm~(-1)子峰峰强也大大增加。结构分析表明，顺式结构特征振动CH=CH面外变角与分子链的构象有密切联系，而仅式(T)和1.2(v)结构却不存在这种情况，因而967cm~(-1)(T)和911cm~(-1)(v)两特征峰低温下变化都很小。本工作认为顺式结构738cm~(-1)峰这一变化是由于顺式结构不同分子链构象所造成的。低温和室温下分峰所得的左子峰对应于最稳定构象产生的吸收，右子峰则对应于相对不稳定构象产生的吸收。同时本工作肯定了米晋瑁等人提出的红外光谱定量分析方法在高顺式样品中的适用性。2、PBD分子链序列结构对红外光谱的影响由于在非高顺式样品中存在CCC、CCT、CCV、TCV、TCT、VCV等多种序列形式，通过不同组成的PBD红外光谱分析，发现在乙烯基含量中、高的样品中，原来738cm~(-1)峰已不再存在，峰值出现在733cm~(-1)附近，而且受1.2结构部分吸收的严重影响，顺式结构CH=CH面外变角吸收已不再是顺式结构的特征峰。通过对850至650cm~(-1)光谱区的光谱解析，本工作认为朱晋瑁等人的红外光谱定量分析方法在乙烯含量中、高的样品中已不再适用。3、PBD拉曼光谱的微结构分析本工作对PBD拉曼光谱1600-1700cm~(-1)区进行了光谱测定，选择了1666、1652和1639.5cm~(-1)吸收峰作为T、C和V构型的特征峰，借助于景遐斌老师的计算分峰方法，对PBD样品进行微结构分析，结果表明，各吸收带拟合良好，特征峰峰位稳定，分别在1666±1、1652±1.5和1639.5±1 cm~(-1)，半峰宽变化不大，峰与峰之间相互影响很小，也就是说，我们选用的特征峰是合理的。用分峰所得的相对面积，结合~1H-NMR测得的值，建立了拉曼光谱PBD定量分析方法。用这一方法对27个不同微结构组成的PBD样品进行分析，所得结果与~1HNMR（高顺式样品与~(13)C-NMR、IR）比较，绝大部分样品一致性很好，最大偏差小于2%。本工作认为，用1666、1652和1639.5cm~(-1)碳双键伸缩振动吸收峰作为T、C和V构型特征峰进行定量分析，在理论上是合理的，在实际上是可行的。而且本方法直接使用固体样品，不经任何溶解和处理，所有计算处理在微机上即可实现，操作和计算都很方便。

Characterization of the acid sites in dealuminated nanosized HZSM-5 zeolite with the probe molecule trimethylphosphine

The acid sites in dealuminated HZSM-5 zeolite with crystal sizes down to the nanoscale were firstly characterized by the probe molecule trimethylphosphine (TMP). As evidenced by the combination of P-31 CP/MAS NMR, Al-27 MAS and H-1 --> Al-27 CP/MAS NMR measurements, the Bronsted acid sites of both microsized and nanosized HZSM-5 could be decreased upon the dealumination of zeolitic framework after hydrothermal treatment. At the same time, the appearance of Lewis acid sites was observed. The dealuminated nanosized HZSM-5 is easier to form Lewis acid sites than microsized HZSM-5, and the type of Lewis acid sites in nanosized HSM-5 is more than one. In addition, the origin of Lewis acid sites is mainly associated with the aluminum at ca. 30 ppm, in the Al-27 MAS NMR spectra, and only a part of which in the dealuminated HZSM-5 zeolite acts as Lewis acid sites. (C) 2002 Elsevier Science B.V. All rights reserved.