The vasodilatory response of skin microcirculation to local heating is subject to desensitization

RAPPORT DE SYNTHESE Introduction : dans la présente étude, nous nous sommes intéressés à la vasodilatation cutanée induite par le réchauffement local (hyperémie thermique). Il est établi, qu'une partie de cette réponse vasculaire est médiée par l'oxyde nitrique (NO). De manière générale, les effets du NO peuvent être sujets à une désensibilisation, comme nous le démontre le phénomène bien connu de tolérance aux dérivés nitrés. Le but du présent travail était d'évaluer si une telle désensibilisation existe dans le cas de l'hyperémie thermique. Méthodes : nous avons donc examiné si une première stimulation thermique pouvait en atténuer une deuxième, induite plus tard sur le même site cutané à une intervalle de 2h ou 4h. Pour vérifier directement l'effet du réchauffement local sur la sensibilité de la microcirculation cutanée au NO, nous avons de plus appliqué un donneur de NO (nitroprussiate de sodium, SNP) par la technique d' iontophorèse, sur des sites cutanés préalablement soumis à un échauffement local 2h ou 4h auparavant. Nous avons examinés 12 sujets en bonne santé habituelle, de sexe masculin, non fumeurs, âgés de 18 à 30 ans, ne prenant aucune médication. Le flux sanguin dermique a été mesuré par imagerie laser Doppler (LDI, Moor Instruments) sur la face antérieur de l'avant-bras. Le réchauffement local de la peau a été effectué grâce a des petits anneaux métalliques thermo-contrôlés contenant de l'eau. La température était initialement de 34°C. Elle a été augmentée à 41 °C en une minute et maintenue à cette valeur durant 30 minutes. Cette manoeuvre a été répétée sur le même site cutané soit 2 h, soit 4h plus tard. Quant à l'iontophorèse de SNP, elle a été effectuée sur des sites ayant préalablement subi, 2h ou 4h auparavant, un échauffement unique appliqué selon la technique qui vient d'être décrite. Résultats : nous avons observé une atténuation de l'hyperémie thermique lorsque celleci était examinée 2h après un premier échauffement local. Lorsque l'intervalle était de 4h la réponse vasodilatatrice n'était pas réduite. Nous avons également observé une atténuation de la réponse vasodilatatrice au SNP lorsque celui-ci a était appliqué 2h, mais non 4h après un premier échauffement local. Conclusion :cette étude démontre que la réponse vasodilatatrice cutanée induite par l'échauffement local est bien sujette à désensibilisation, comme nous en avions formulé l'hypothèse. Ce phénomène est transitoire. Il est lié, au moins en partie, à une baisse de sensibilité de la microcirculation cutanée aux effets vasodilatateurs du NO.

Cooling and heating by adiabatic magnetization in Ni50Mn34In16 magnetic shape-memory alloy

We report on measurements of the adiabatic temperature change in the inverse magnetocaloric Ni50Mn34In16 alloy. It is shown that this alloy heats up with the application of a magnetic field around the Curie point due to the conventional magnetocaloric effect. In contrast, the inverse magnetocaloric effect associated with the martensitic transition results in the unusual decrease of temperature by adiabatic magnetization. We also provide magnetization and specific heat data which enable to compare the measured temperature changes to the values indirectly computed from thermodynamic relationships. Good agreement is obtained for the conventional effect at the second-order paramagnetic-ferromagnetic phase transition. However, at the first-order structural transition the measured values at high fields are lower than the computed ones. Irreversible thermodynamics arguments are given to show that such a discrepancy is due to the irreversibility of the first-order martensitic transition.

The vasodilatory response of skin microcirculation to local heating is subject to desensitization.

BACKGROUND: In humans, local heating increases skin perfusion by mechanisms dependent on nitric oxide (NO). Because the vascular effects of NO may be subject to desensitization, we examined whether a first local thermal stimulus would attenuate the hyperemic response to a second one applied later. METHODS: Twelve healthy young men were studied. Skin blood flow (SkBF) was measured on forearm skin with laser Doppler imaging. Local thermal stimuli (temperature step from 34 to 41 degrees C maintained for 30 minutes) were applied with temperature-controlled chambers. We also tested the influence of prior local heating on the vasodilation induced by sodium nitroprusside (SNP), a donor of NO. RESULTS: On reheating the same spot after two hours, the response of SkBF (i.e., plateau SkBF at 30 minutes minus SkBF at 34 degrees C) was lower than during the first stimulation (mean+/-SD 404+/-212 perfusion units [PU] vs. 635+/-100 PU; P<0.001). There was no such difference when reheating after four hours (654+/-153 vs. 645+/-103 PU; P=NS). Two, but not four, hours after local heating, the response of SkBF to SNP was reduced. CONCLUSION: The NO-dependent hyperemic response induced by local heating in human skin is subject to desensitization. At least one part of the mechanism implicated consists of a desensitization to the effects of NO itself.

Anomalous crystallization of hydrogenated amorphous silicon during fast heating ramps

Thermal crystallization experiments carried out using calorimetry on several a-Si:H materials with different microstructures are reported. The samples were crystallized during heating ramps at constant heating rates up to 100 K/min. Under these conditions, crystallization takes place above 700 C and progressively deviates from the standard kinetics. In particular, two crystallization processes were detected in conventional a-Si:H, which reveal an enhancement of the crystallization rate. At100 K/min, such enhancement is consistent with a diminution of the crystallization time by a factor of 7. In contrast, no systematic variation of the resulting grain size was observed. Similar behavior was also detected in polymorphous silicon and silicon nanoparticles, thus showing that it is characteristic of a variety of hydrogenated amorphous silicon materials.

Home Heating and Cooling, 2011

Every year, a typical family in the United States spends around half of its home energy budget on heating and cooling. In Iowa, that percentage can be higher, due to temperature extremes reached during the winter and summer months. Unfortunately, many of those dollars often are wasted, because conditioned air escapes through leaky ceilings, walls and foundations—or flows through inadequately insulated attics, exterior walls and basements. In addition, many heating systems and air conditioners aren’t properly maintained or are more than 10 years old and very inefficient, compared to models being sold today. As a result, it makes sense to analyze your home as a collection of systems that must work together in order to achieve peak energy savings. For example, you won’t get anywhere near the savings you’re expecting from a new furnace if your airhandling ducts are uninsulated and leak at every joint. The most energy-efficient central air-conditioning setup won’t perform to your expectations if your attic insulation is inadequate and can’t reduce solar heat gain to help keep your home cool. And planting the wrong types of trees or shrubs close to your home adversely can affect potential energy savings all year long.

Water Heating, 2011

Although there are many ways to cut you water heating bills, the all fall into two broad categories: reducing the amount of hot water you use and making your water heating system more efficient. Fortunately, there are several strategies that can help you consume less energy and save money - and still meet you hot water needs without sacrificing comfort or practicality. The booklet was designed to answer common questions about hot water systems and to provide you with the information necessary to make informed decision about a wide variety of topics, ranging from repairing hot water faucet leaks an insulation water supply pipes to installing low-flow shower heads and tuning you your existing water heather. You'll also find details on what to consider when it's time to go comparison shopping for a new water heater-including an evaluation of the alternatives to the common gas or electric storage tank unit that's found in the majority of homes in Iowa and across the country.

Influence of ohmic heating on the flow field in thin-layer electrodeposition

In thin-layer electrodeposition the dissipated electrical energy leads to a substantial heating of the ion solution. We measured the resulting temperature field by means of an infrared camera. The properties of the temperature field correspond closely with the development of the concentration field. In particular, we find that the thermal gradients at the electrodes act similar to a weak additional driving force to the convection rolls driven by concentration gradients.

Elder Abuse Task Force Report Pursuant to HF 2387: An Act Relating to Improvements to and Implementation of Laws Concerning Elder Abuse

During its 2012 session, Iowa’s 84th General Assembly passed House File 2387. The bill was signed into law by Governor Branstad and mandated a review of occurrences of and laws relating to abuse, neglect, or exploitation of individuals who are sixty years of age or older. After conducting the review, the twenty-three member Elder Abuse Task Force presents the following recommendations. These recommendations build upon current Iowa law and practice for the purpose of protecting older Iowans from abuse, neglect, and exploitation.

Anomalous crystallization of hydrogenated amorphous silicon during fast heating ramps

Thermal crystallization experiments carried out using calorimetry on several a-Si:H materials with different microstructures are reported. The samples were crystallized during heating ramps at constant heating rates up to 100 K/min. Under these conditions, crystallization takes place above 700 C and progressively deviates from the standard kinetics. In particular, two crystallization processes were detected in conventional a-Si:H, which reveal an enhancement of the crystallization rate. At100 K/min, such enhancement is consistent with a diminution of the crystallization time by a factor of 7. In contrast, no systematic variation of the resulting grain size was observed. Similar behavior was also detected in polymorphous silicon and silicon nanoparticles, thus showing that it is characteristic of a variety of hydrogenated amorphous silicon materials

Solid phase crystallization under continuous heating: kinetic and microstructure scaling laws

The kinetics and microstructure of solid-phase crystallization under continuous heating conditions and random distribution of nuclei are analyzed. An Arrhenius temperature dependence is assumed for both nucleation and growth rates. Under these circumstances, the system has a scaling law such that the behavior of the scaled system is independent of the heating rate. Hence, the kinetics and microstructure obtained at different heating rates differ only in time and length scaling factors. Concerning the kinetics, it is shown that the extended volume evolves with time according to αex = [exp(κCt′)]m+1, where t′ is the dimensionless time. This scaled solution not only represents a significant simplification of the system description, it also provides new tools for its analysis. For instance, it has been possible to find an analytical dependence of the final average grain size on kinetic parameters. Concerning the microstructure, the existence of a length scaling factor has allowed the grain-size distribution to be numerically calculated as a function of the kinetic parameters

Avaluació de la futura gestió i utilització de la biomassa forestal mitjançant un district heating a Bellver de Cerdanya

En aquest article es pretén explicar breument la viabilitat de la futura gestió i utilització de la biomassa forestal de Bellver de Cerdanya mitjançant un district heating al futur barri del Pla de Tomet. Les particularitats per les quals aquest poble és ideal per a aquest projecte són que l'ajuntament és propietari de gairebé un 90% dels boscos situats en aquest municipi; i que alhora ja ha realitzat diverses instal·lacions que utilitzen la biomassa forestal per a calefacció i ACS. La situació econòmica de la comarca és bastant complicada, ja que s'ha basat en el sector turístic i la construcció, però ambdós no passen pel millor moment. El projecte serviria per donar un valor a la biomassa forestal que fins ara no s'ha donat, i alhora s'intenta buscar nous inputs econòmics per a la Cerdanya. En aquest treball també s'analitza quins haurien de ser els futurs tractaments que s'haurien d'aplicar a la forest, tenint en compte les activitats que es realitzen actualment, i evitant en tot moment possibles efectes negatius, com podria ser la sobreexplotació. També es dedica una part del projecte a explicar els sistemes per obtenir i gestionar de forma correcta la biomassa. A continuació es tracta la part més tècnica, realitzant una estimació del possible futur consum energètic del barri del Pla de Tomet, encara no construït; i decidint quins sistema de calderes seria el més adequat, el tipus d’emmagatzematge més apropiat i els passos a seguir per millorar el rendiment del procés de la gestió i extracció de la biomassa. Seguint tots aquests passos s'arriba a la conclusió que aprofitar la biomassa forestal és millor solució que utilitzar combustibles fòssils. A part dels obvis beneficis medi ambientals, també és millor a nivell econòmic, tant pels futurs veïns com per l'ajuntament.