The influence of nitrogen and phosphorus on the growth of a diatom Skeletonema costatum (Greville) Cleve

Nitrogen and phosphorus requirements of a chain-forming diatom, Skeletonema costatum (Greville) Cleve, collected from Yatsushiro Sea, Japan, were investigated in a laboratory culture experiment. Sodium nitrate and sodium glycerophosphate were used as nitrogen and phosphorus sources, respectively. Cultures were grown in modified Provasoli's ASP2NTA medium (Provasoli et al. 1957) at 25±1°C, light intensity 60 µE mˉ² secˉ¹ and photoperiod 12:12-h, L:D cycle. Optimum growth was observed at nitrate concentrations of 3-10 mglˉ¹ and phosphate concentrations of 1.5-15 mglˉ¹. Adequate growth was also found at the nitrate concentration of up to as high as 300 mglˉ¹. Significantly poorer growth was found at lower nitrate (<3.0 mglˉ¹) and higher phosphate (>15 mglˉ¹) concentrations. From the present study, it is concluded that S. costatum can grow well at wide ranges of nitrate concentrations but is sensitive to higher phosphate concentrations.

Physiological observations on a diatom Skeletonema costatum (Greville) Cleve

A chain-forming diatom Skeletonema costatum (Greville) Cleve collected from Yatsushiro Sea, Japan was cultured to determine the optimum level of some physico-chemical factors for their growth under laboratory conditions. Filtered and sterilized aged sea water enriched by adding nutrient solution (Provasoli 1968) was used as the culture medium. The plankton could tolerate a wide range of salinities (3-55 ppt). Optimum growth was observed at salinities of 20-35 ppt, temperatures of 20-25°C, light intensities of 80-120µE mˉ² secˉ¹ and pH between 7.5 and 8.0. Growth did not occur at salinities below 3 ppt and at temperatures above 30°C. From the present study, it is concluded that S. costatum was extremely euryhaline and tolerable to very low salinities.

Seasonal variation of alginic acid content in Sargassum cervicone Greville from Hikkaduwa

Sargassum cervicone Greville is one of the species of Sargassum occuring in abundance along the South Western Coast of Ceylon. Durairatnam 1966 carried out a survey from Ambalangoda to Hambantota, and estimated that approximately 130 tons of dried Sargassum can be harvested manually. The bulk of the Sargassum found in this area was Sargassum cervicone Greville.

Preliminary studies on growth and survival of Penaeus japonicus postlarvae fed with Tapes and commercial formula feeds

Growth and survival of P. japonicus postlarvae was studied using Tapes philippinarum and commercial formula feeds. After a 28-day feeding period, the highest survival rate of 100% was obtained in prawns receiving Diet-B, followed by those on Tapes Kyowa Hakko shrimp meal with survival rates of 80 and 76.7%, respectively. The lowest survival rate of 48.3% was obtained among postlarvae fed with squid meal. In this batch cannibalism was observed which resulted in low survival. Growth was highest in the postlarvae fed with Kyowa Hakko and mysid feeds. Diet-B gave a slightly lower weight increase but gave similar gain in length. The composition of the artificial diet, Diet-B, and growth and survival rates are tabulated.

Mass culture of marine diatom Skeletonema costatum (Greville) Cleve collected from the Bay of Bengal

The growth of Skeletonema costatum in two artificial nutrient media was studied using various culture vessels. Skeletonema costatum was collected from the Cox's Bazar coast around the Bay of Bengal. Different growths stages i.e. lag phase, exponential phase, prestationary phase, stationary and death phase were observed during the culture period. The number of cells increased during the active division period and decreased after the beginning of the prestationary phase. The average densities of S. costatum in primary and secondary cultures were 0.55 x 10 super(6) cells mlˉ¹ and 0.93x10 super(6) cells mlˉ¹, respectively. In mass culture of S. costatum two, types of media were used. Highest cells densities of S. costatum cement tank culture were recorded 1.23x10 super(6) cell mlˉ¹ and 0.78x10 super(6) cells mlˉ¹ in their respective f/4 medium and commercial fertilizer medium. In the cement tanks culture fertilizer medium was found to be the best medium for mass culture of S. costatum in respect of production efficiency and culture stability.

Pressure data analysis of formula one racing engines

The measured time-history of the cylinder pressure is the principal diagnostic in the analysis of processes within the combustion chamber. This paper defines, implements and tests a pressure analysis algorithm for a Formula One racing engine in MATLAB1. Evaluation of the software on real data is presented. The sensitivity of the model to the variability of burn parameter estimates is also discussed. Copyright © 1997 Society of Automotive Engineers, Inc.

Landauer-Buttiker formula for time-dependent transport through resonant-tunneling structures: A nonequilibrium Green's function approach

A nonequilibrium Green's-function formalism is employed to study the time-dependent transport through resonant-tunneling structures. With this formalism, we derive a time-dependent Landauer-Buttiker formula that guarantees current conservation and gauge invariance. Furthermore, we apply the formula to calculate the response behaviors of the resonant-tunneling structures in the presence of rectangular-pulse and harmonic-modulation fields. The results show that the displacement current plays the role of retarding the tunneling current.

Hydrogen-Bonding Recognition-Induced Color Change of Gold Nanoparticles for Visual Detection of Melamine in Raw Milk and Infant Formula

The color change induced by triple hydrogen-bonding recognition between melamine and a cyanuric acid derivative grafted on the surface of gold nanoparticles can be used for reliable detection of melamine. Since such a color change can be readily seen by the naked eye, the method enables on-site and real-time detection of melamine in raw milk and infant formula even at a concentration as low as 2.5 ppb without the aid of any advanced instruments.

Calculation formula and synthesis for controlling the composition of hydroxy - Terminated butadiene acrylonitrile cooligomer

In preparing copolymer of the same composition by batch process in two - component copolymerization it is necessary to keep the monomer ratio constant by replenishing the fraction of the more reactive monomer. In this paper a calculation method for monomer feeding is derived, which iscapable of controlling the composition of cooligomer during the course of reaction. Some cooligomers of acrylonitrile and butadiene with relatively the same compositions have been prepared using the replenishing method. The method would be useful for other two - component copolymerization ion process.

PRINCIPLES FOR STRUCTURE GENERATION OF ORGANIC ISOMERS FROM MOLECULAR FORMULA

An expert system for the elucidation of the structure of organic compounds (ESESOC) has been developed. The heart of the ESESOC is formed by the structure generator as an integral part, which receives the specific type of information (molecular formula, s

Infant milk formula manufacture: process and compositional interactions in high dry matter wet-mixes

Infant milk formula (IMF) is fortified milk with composition based on the nutrient content in human mother's milk, 0 to 6 months postpartum. Extensive medical and clinical research has led to advances in the nutritional quality of infant formula; however, relatively few studies have focused on interactions between nutrients and the manufacturing process. The objective of this research was to investigate the impact of composition and processing parameters on physical behaviour of high dry matter (DM) IMF systems with a view to designing more sustainable manufacturing processes. The study showed that commercial IMF, with similar compositions, manufactured by different processes, had markedly different physical properties in dehydrated or reconstituted state. Commercial products made with hydrolysed protein were more heat stable compared to products made with intact protein, however, emulsion quality was compromised. Heat-induced denaturation of whey proteins resulted in increased viscosity of wet-mixes, an effect that was dependant on both whey concentration and interactions with lactose and caseins. Expanding on fundamental laboratory studies, a novel high velocity steam injection process was developed whereby high DM (60%) wet-mixes with lower denaturation/viscosity compared to conventional processes could be achieved; powders produced using this process were of similar quality to those manufactured conventionally. Hydrolysed proteins were also shown to be an effective way of reducing viscosity in heat-treated high DM wet-mixes. In particular, using a whey protein concentrate whereby β-Lactoglobulin was selectively hydrolysed, i.e., α-Lactalbumin remained intact, reduced viscosity of wet-mixes during processing while still providing good emulsification. The thesis provides new insights into interactions between nutrients and/or processing which influence physical stability of IMF both in concentrated liquid and powdered form. The outcomes of the work have applications in such areas as; increasing the DM content of spray drier feeds in order to save energy, and, controlling final powder quality.

A mathematical theory of stochastic microlensing. II. Random images, shear, and the Kac-Rice formula

Continuing our development of a mathematical theory of stochastic microlensing, we study the random shear and expected number of random lensed images of different types. In particular, we characterize the first three leading terms in the asymptotic expression of the joint probability density function (pdf) of the random shear tensor due to point masses in the limit of an infinite number of stars. Up to this order, the pdf depends on the magnitude of the shear tensor, the optical depth, and the mean number of stars through a combination of radial position and the star's mass. As a consequence, the pdf's of the shear components are seen to converge, in the limit of an infinite number of stars, to shifted Cauchy distributions, which shows that the shear components have heavy tails in that limit. The asymptotic pdf of the shear magnitude in the limit of an infinite number of stars is also presented. All the results on the random microlensing shear are given for a general point in the lens plane. Extending to the general random distributions (not necessarily uniform) of the lenses, we employ the Kac-Rice formula and Morse theory to deduce general formulas for the expected total number of images and the expected number of saddle images. We further generalize these results by considering random sources defined on a countable compact covering of the light source plane. This is done to introduce the notion of global expected number of positive parity images due to a general lensing map. Applying the result to microlensing, we calculate the asymptotic global expected number of minimum images in the limit of an infinite number of stars, where the stars are uniformly distributed. This global expectation is bounded, while the global expected number of images and the global expected number of saddle images diverge as the order of the number of stars. © 2009 American Institute of Physics.

Drug calculations part 2: alternative strategies to the formula

Drug calculations are an essential skill for nurses. The clinical skill of performing a drug calculation has come under recent scrutiny,resulting in the development of essential skills clusters inwhich pre-registration nurses must be competent before qualifying (Nursing and Midwifery Council 2007). The focuson drug calculation skills places renewed emphasis on how these skills are taught in higher education institutions and how they are learned by students theoretically and in clinical practice.