Far-red light filtering by plastic film, greenhouse-cladding materials: effects on growth and flowering in Petunia and Impatiens

Photoselective plastic films with low transmission to far-red (FR) light (700-800 nm) are now available so that plants grown in greenhouses clad with such plastics exhibit reduced stem extension and, consequently, plant height. Here we compare the action of three FR-absorbing polythene films on extension growth of Petunia (Petunia X hybrida) cv. 'Express Blue' and Impatiens walleriana cv. 'Accent Deep Pink' with plants grown under a control polythene film (standard UVI/EVA film). Half of the plants under the control film were treated with a chemical plant growth regulator (PGR; diaminozide, B-Nine) and half were sprayed with water alone. Possible negative effects of such film plastics on flowering, and on fresh and dry weight accumulation, were also quantified. Plants were harvested destructively when all plants in each treatment had reached the first open flower stage. In Petunia, plant height was reduced by all three FR-filtering films and by PGR-treatment. The FR-filtering films giving the highest R:FR ratios also reduced plant height in Impatiens. Leaf number, leaf area and total dry Weight in both species. were greatest in the controls and smallest under films with the lowest PAR transmission. The film giving the highest R:FR ratio and PAR transmission also produced the most compact Petunia plants;, while the film. with. the lowest PAR transmission produced the least compact plants in both species. There was no significant effect of treatments on time to first flower in Impatiens. However, Petunia plants under low PAR transmission films took longer to flower. Plastic-films which filter out FR light to increase the R:FR ratio, combined With high PAR transmission, can therefore be used as an alternative to conventional PGRs.

Technologies for biological containment of GM and Non-GM crops

International Perspective The development of GM technology continues to expand into increasing numbers of crops and conferred traits. Inevitably, the focus remains on the major field crops of soybean, maize, cotton, oilseed rape and potato with introduced genes conferring herbicide tolerance and/or pest resistance. Although there are comparatively few GM crops that have been commercialised to date, GM versions of 172 plant species have been grown in field trials in 31 countries. European Crops with Containment Issues Of the 20 main crops in the EU there are four for which GM varieties are commercially available (cotton, maize for animal feed and forage, and oilseed rape). Fourteen have GM varieties in field trials (bread wheat, barley, durum wheat, sunflower, oats, potatoes, sugar beet, grapes, alfalfa, olives, field peas, clover, apples, rice) and two have GM varieties still in development (rye, triticale). Many of these crops have hybridisation potential with wild and weedy relatives in the European flora (bread wheat, barley, oilseed rape, durum wheat, oats, sugar beet and grapes), with escapes (sunflower); and all have potential to cross-pollinate fields non-GM crops. Several fodder crops, forestry trees, grasses and ornamentals have varieties in field trials and these too may hybridise with wild relatives in the European flora (alfalfa, clover, lupin, silver birch, sweet chestnut, Norway spruce, Scots pine, poplar, elm, Agrostis canina, A. stolonifera, Festuca arundinacea, Lolium perenne, L. multiflorum, statice and rose). All these crops will require containment strategies to be in place if it is deemed necessary to prevent transgene movement to wild relatives and non-GM crops. Current Containment Strategies A wide variety of GM containment strategies are currently under development, with a particular focus on crops expressing pharmaceutical products. Physical containment in greenhouses and growth rooms is suitable for some crops (tomatoes, lettuce) and for research purposes. Aquatic bioreactors of some non-crop species (algae, moss, and duckweed) expressing pharmaceutical products have been adopted by some biotechnology companies. There are obvious limitations of the scale of physical containment strategies, addressed in part by the development of large underground facilities in the US and Canada. The additional resources required to grow plants underground incurs high costs that in the long term may negate any advantage of GM for commercial productioNatural genetic containment has been adopted by some companies through the selection of either non-food/feed crops (algae, moss, duckweed) as bio-pharming platforms or organisms with no wild relatives present in the local flora (safflower in the Americas). The expression of pharmaceutical products in leafy crops (tobacco, alfalfa, lettuce, spinach) enables growth and harvesting prior to and in the absence of flowering. Transgenically controlled containment strategies range in their approach and degree of development. Plastid transformation is relatively well developed but is not suited to all traits or crops and does not offer complete containment. Male sterility is well developed across a range of plants but has limitations in its application for fruit/seed bearing crops. It has been adopted in some commercial lines of oilseed rape despite not preventing escape via seed. Conditional lethality can be used to prevent flowering or seed development following the application of a chemical inducer, but requires 100% induction of the trait and sufficient application of the inducer to all plants. Equally, inducible expression of the GM trait requires equally stringent application conditions. Such a method will contain the trait but will allow the escape of a non-functioning transgene. Seed lethality (‘terminator’ technology) is the only strategy at present that prevents transgene movement via seed, but due to public opinion against the concept it has never been trialled in the field and is no longer under commercial development. Methods to control flowering and fruit development such as apomixis and cleistogamy will prevent crop-to-wild and wild-to-crop pollination, but in nature both of these strategies are complex and leaky. None of the genes controlling these traits have as yet been identified or characterised and therefore have not been transgenically introduced into crop species. Neither of these strategies will prevent transgene escape via seed and any feral apomicts that form are arguably more likely to become invasives. Transgene mitigation reduces the fitness of initial hybrids and so prevents stable introgression of transgenes into wild populations. However, it does not prevent initial formation of hybrids or spread to non-GM crops. Such strategies could be detrimental to wild populations and have not yet been demonstrated in the field. Similarly, auxotrophy prevents persistence of escapes and hybrids containing the transgene in an uncontrolled environment, but does not prevent transgene movement from the crop. Recoverable block of function, intein trans-splicing and transgene excision all use recombinases to modify the transgene in planta either to induce expression or to prevent it. All require optimal conditions and 100% accuracy to function and none have been tested under field conditions as yet. All will contain the GM trait but all will allow some non-native DNA to escape to wild populations or to non-GM crops. There are particular issues with GM trees and grasses as both are largely undomesticated, wind pollinated and perennial, thus providing many opportunities for hybridisation. Some species of both trees and grass are also capable of vegetative propagation without sexual reproduction. There are additional concerns regarding the weedy nature of many grass species and the long-term stability of GM traits across the life span of trees. Transgene stability and conferred sterility are difficult to trial in trees as most field trials are only conducted during the juvenile phase of tree growth. Bio-pharming of pharmaceutical and industrial compounds in plants Bio-pharming of pharmaceutical and industrial compounds in plants offers an attractive alternative to mammalian-based pharmaceutical and vaccine production. Several plantbased products are already on the market (Prodigene’s avidin, β-glucuronidase, trypsin generated in GM maize; Ventria’s lactoferrin generated in GM rice). Numerous products are in clinical trials (collagen, antibodies against tooth decay and non-Hodgkin’s lymphoma from tobacco; human gastric lipase, therapeutic enzymes, dietary supplements from maize; Hepatitis B and Norwalk virus vaccines from potato; rabies vaccines from spinach; dietary supplements from Arabidopsis). The initial production platforms for plant-based pharmaceuticals were selected from conventional crops, largely because an established knowledge base already existed. Tobacco and other leafy crops such as alfalfa, lettuce and spinach are widely used as leaves can be harvested and no flowering is required. Many of these crops can be grown in contained greenhouses. Potato is also widely used and can also be grown in contained conditions. The introduction of morphological markers may aid in the recognition and traceability of crops expressing pharmaceutical products. Plant cells or plant parts may be transformed and maintained in culture to produce recombinant products in a contained environment. Plant cells in suspension or in vitro, roots, root cells and guttation fluid from leaves may be engineered to secrete proteins that may be harvested in a continuous, non-destructive manner. Most strategies in this category remain developmental and have not been commercially adopted at present. Transient expression produces GM compounds from non-GM plants via the utilisation of bacterial or viral vectors. These vectors introduce the trait into specific tissues of whole plants or plant parts, but do not insert them into the heritable genome. There are some limitations of scale and the field release of such crops will require the regulation of the vector. However, several companies have several transiently expressed products in clinical and pre-clinical trials from crops raised in physical containment.

The gynoecium of male Anchietea pyrifolia (Violaceae): Preserved structure with a new function

Structure of inflorescences and flowers and flowering behaviour are reported for the woody liana Anchietea pyrifolia (Violaceae) from Brazil. The specimen studied is grown for some decades now in the greenhouses of Halle Botanical Garden and turned out unisexually male, which adds a further example of dioecism to the family Violaceae, in which this type of sex distribution is rarely encountered. The flowers are exceptional also for the strongly asymmetric anterior petal, which represents a rare case of a species with enantiomorphic flowers pollinated by Lepidoptera. They have a fully developed gynoecium with a complicated architecture comparable to the pistil of bisexual Violaceae flowers, though without ovules. The style head is capable to release viscose liquid on tactile stimulation or pressure, which is known to act as pollen-gathering mechanism in bisexual Violaceae species with usually dry pollen and buzz-pollination. This function has switched in male A. pyrifolia to a mechanism for efficient pollen release mediated by insect pollinators from its short-lived flowers. (C) 2009 Elsevier GmbH. All rights reserved.

Operational experiences with rockbed storage systems

Many rockbed thermal storage systems were installed in solar homes and greenhouses in Australia during the 1970s and 1980s. However, this technology appears to have waned in popularity since that time, although other storage options such as phase change materials are still not established alternatives. This paper re-evaluates rockbed storage technology, in the light of the experiences of users over the last 20 years. Of the 31 systems investigated, only seven were determined to be still working. There are a number of reasons for this, depending on the type and use of the system, which are discussed.

Measurement of natural convection heat transfer in an attic shaped enclosure

Heat transfer by natural convection in triangular enclosures is an area of significant importance in applications such as the design of greenhouses, attics and solar water heaters. However, given its significance to these areas it has not been widely examined. In this study, the natural convection heat transfer coefficients in an attic shaped enclosure were determined for Grashof Numbers over the range 107 to 109. It was found that the measured heat transfer coefficients could be predicted to within 5% by Ridouane and Campo’ (2005) equation (Eqn. 1) for natural convection in a triangular enclosure previously developed for Grashof Numbers in the range 105 to 106.

Nu=0.286*A-0.286*Gr1/4 (Eqn. 1)

As such, it is suggested that this equation may be suitable for predicting the natural convection heat transfer coefficients in full scale attic enclosures.

Solar greenhouse technology for food security : a case study from Humla District, NW Nepal

Food security is a significant issue for many people who live in remote mountain areas around the world. Most of these people are also poor because of the lack of opportunity to earn cash. Malnutrition is common because the harsh climate restricts production and access to fresh food. Simple conventional greenhouses can provide some improvement of growing conditions, but the benefits are limited because of the high heat losses from these structures. Solar greenhouses, however, which are designed to store some of the heat generated within the structure can overcome these limitations. This article describes the experiences of a nongovernmental organization that has been introducing community and family-owned solar greenhouses into the remote villages of Humla, a mountainous district of northwest Nepal prone to food insecurity. The overall result has been positive. Family-owned greenhouses, which avoid the issues of community ownership and operation, have been more successful. A validated computer model based on the first solar greenhouse has been used to predict the thermal performance of a new family-sized design. Training and education are vital to the success of solar greenhouse technology in remote mountain areas.

A family-sized greenhouse for a remote mountain region of Nepal

Food security is a significant issue in the remote, high altitude areas of Nepal. Malnutrition is common because the harsh climate restricts production and access to fresh food. Humla is a province in north-west Nepal where the severe weather conditions and limited arable land restrict the growing season of vegetables to only 4-5 months a year. Passive solar greenhouses are a technology that can be used to extend the growing period of vegetables. For the greenhouse to be effective in Humla, the design must be appropriate to the climatic conditions, available resources and the social requirements of the community. This paper describes the design and evaluation of a family-sized solar greenhouse proposed for Humla. Three solar greenhouses built in other high altitude areas have initially been reviewed to see what techniques might be replicated in Humla. The thermal performance of the proposed family-sized greenhouse has been predicted using the solar simulation software, TRNSYS, and compared against an existing design in the area. The proposed design was found to be superior and average night-time temperatures in the coldest month were predicted to be approximately 7°C higher. Overheating was controlled in the hottest month by shading and natural ventilation.

Thermal evaluation of a greenhouse in a remote high altitude area of Nepal

Remote communities in the high altitude areas of Nepal suffer both chronic and acute malnutrition. This is due to a shortage of arable land and a harsh climate. For seven months of the year, the harvesting of fresh vegetables is almost impossible. Greenhouse technology, if appropriate for the location and its community, can extend the growing season considerably. Experience in the Ladakh region of India indicates that year-round cropping is possible in greenhouses in cold mountainous areas. A simple 50-m2 greenhouse has been constructed in Simikot, the main town of Humla, northwest Nepal. This paper describes the evaluation of the thermal performance of that greenhouse. Both measurement and simulation were used in the evaluation. Measurements during the winter of 2006-7 indicate that the existing design is capable of producing adequate growing conditions for some vegetable crops, but that improvements are required if crops like tomatoes are to be grown successfully. Options to improve the thermal performance of the greenhouse have been investigated by simulation. Improvements to the building envelope such as wall insulation, double-glazing and using a thermal screen were simulated with a validated TRNSYS model. The impact of the addition of nighttime heat from internal passive solar water collectors was also predicted. The simulations indicate that the passive solar water collectors would raise the average greenhouse air temperature by 2.5°C and the overnight air temperature would increase by 4.0°C. When used in combination, overnight temperatures are predicted to by almost 7°C higher.

Cravo-de-defunto como planta atrativa para tripes em cultivo protegido de melão orgânico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Colored polyethylene soil covers and grafting effects on cucumber flowering and yield

O pepino (Cucumis sativus L.) é, dentre os produtos hortícolas, um dos mais visados para o cultivo em estufas no Brasil devido ao ciclo vegetativo curto e ao elevado valor econômico no período da entressafra. Estudou-se, em condições de ambiente protegido, a influência de diferentes cores de cobertura plástica de solo no florescimento e na produção de pepino híbrido 'Yoshinari' enxertado ou não sobre abóbora híbrida 'Ikky'. Os tratamentos de cobertura foram: preto, preto pintado de branco, verde, e sem cobertura. Os tratamentos cobertos com plástico e sem enxertia apresentaram florescimento com distribuição mais uniforme na planta. O número de flores foi superior no tratamento preto/branco enxertado. Para as plantas não enxertadas, todas as coberturas favoreceram o florescimento. A enxertia favoreceu o florescimento somente para os tratamentos com plástico preto ou verde. A fixação dos frutos aumentou pelo uso de cobertura plástica, mas a enxertia não teve influência. A distribuição uniforme do florescimento manteve-se na frutificação apenas para os tratamentos com plantas enxertadas e cobertura do solo com plástico preto ou verde. Tanto o uso de cobertura plástica quanto a enxertia favoreceram a colheita precoce. Os frutos de melhor qualidade e as maiores produções, em número de frutos, foram obtidos nos tratamentos preto e preto/branco, não enxertados. A enxertia 'Yoshinari'/'Ikky' provocou o aparecimento de frutos mais grossos e menores, fora do padrão de comercialização.

Balanço de radiação e fluxo de calor no solo em ambiente natural e protegido cultivado com pepineiro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estratégias para redução de girassol ornamental para comercialização em vaso

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ácido giberélico na produção de frutos partenocárpicos de pimenta

A presença de sementes em frutos, dependendo da espécie, pode ser dispensável ou até mesmo indesejável ao consumo e à culinária, como seria o caso, por exemplo, de algumas pimentas. Este trabalho teve como objetivo avaliar o efeito da aplicação de ácido giberélico (GA3) na produção e nas características de frutos partenocárpicos em plantas de pimenta escabeche (Capsicum baccatum L.). A semeadura foi realizada em bandejas de poliestireno expandido e o plantio das mudas em estrutura plástica com irrigação por gotejamento. O delineamento experimental foi em blocos casualizados com quatro tratamentos (0; 700; 1.400 e 2.800 mg L-1 de GA3). Foram feitas duas aplicações de GA3: a primeira quando as plantas estavam em plena floração e a segunda aos 10 dias após a primeira aplicação. Observou-se que o GA3 favoreceu a produção de frutos partenocárpicos (94,6% com 2.100 mg L-1 de GA3), diminuiu a produção de frutos (87,1 g fruto/planta com 2.250 mg L-1 de GA3), aumentou a altura da planta (168,0 cm com 2.450 mg L-1 de GA3), porém, prejudicou as características comerciais dos frutos. É possível produzir frutos partenocárpicos com a aplicação de GA3 em pimenta escabeche, porém esta técnica não foi agronomicamente viável.

Desempenho de cultivares de alface americana em resposta a diferentes doses de torta de filtro

Com objetivo de estudar o desempenho de três cultivares de alface americana (Júlia, Tainá e Grandes Lagos) em quatro doses de torta de filtro (0; 10; 20 e 40 ton ha-1), sob cultivo protegido (túnel alto), foi conduzido um experimento na Universidade do Estado de Mato Grosso, em área de Latossolo Vermelho (textura argilosa), nos meses de março a maio de 2009. O delineamento experimental foi em blocos casualizados, distribuídos em esquema fatorial 3 x 4 (cultivares x doses) com quatro repetições. Foram avaliadas as seguintes características agronômicas: circunferência da planta (CP), massa fresca total (MFT), massa fresca comercial (MFCo), massa fresca da cabeça (MFCa), diâmetro do caule (DC), número de folhas comerciais (NFC), comprimento do caule (CC) e número de folhas totais (NFT). As cultivares Júlia e Tainá responderam à adubação com torta de filtro até a dose de 40 ton-1. A cultivar Grandes Lagos respondeu à adubação com torta de filtro até a dose de 35 ton ha-1 para MFT e MFCa e até 40 ton-1 para MFCo. A cultivar Grandes Lagos apresentou melhor desempenho em MFT, MFCo, CC e CP, em relação às demais cultivares, e equiparou-se com a cultivar Tainá em MFCa e NFC e com a cultivar Júlia em DC. Todas as cultivares tiveram comportamentos semelhantes quanto a NFT. A adubação orgânica com torta de filtro aumenta a produtividade de cultivares de alface americana.

Determinação do ponto de colheita e indução à abertura floral do crisântemo cultivar White Polaris em diferentes concentrações de sacarose

Realizou-se pesquisa objetivando determinar o melhor entre quatro pontos de colheita da haste floral de crisântemos de maço do tipo pompom cv. White Polaris a concentração mais adequada de sacarose para tratamento de pulsing dessas hastes: estas foram colhidas em estufa de produção comercial, nos pontos preestabelecidos e transportadas para laboratório, onde foram totalmente imersas em água de torneira, à sombra, durante três horas. Selecionaram-se as hastes pela uniformidade do seu desenvolvimento e cortaram-nas sob água na base do caule, entre 50 e 60 cm, e identificadas, o que permitiu avaliar as mudanças morfológicas associadas às inflorescências individuais. As hastes foram distribuídas e mantidas nos diferentes tratamentos de pulsing durante 24 horas, à luz branca contínua de 1.500 lux, 60 a 90% de umidade relativa do ar e temperatura ambiente de 25 ± 2°C. Após o tratamento de pulsing, as hastes foram transferidas para água destilada, permanecendo por 10 horas sob luz branca contínua, nas mesmas condições de laboratório citadas. A vida floral em vaso começou a ser avaliada na instalação do experimento, após o tratamento de pulsing, e terminou quando as folhas e pétalas perderam a turgescência e o valor decorativo. As hastes colhidas em estádio de botão (25 e 50% de abertura das inflorescências apicais) não alcançaram o ponto de abertura adequado em nenhuma das seis concentrações de sacarose (0 a 146,07 mol/m³); as concentrações de 116,9 146,1 mol/m³, porém, estimularam, em geral, a abertura de botões. Os pontos de colheita 1 e 2 (100 e 75% de abertura das inflorescências apicais respectivamente) apresentaram bons resultados em todas as concentrações de sacarose.