An alternative method for dating unknown tephras based on a segmented regression model

In CoDaWork’05, we presented an application of discriminant function analysis (DFA) to 4 different compositional datasets and modelled the first canonical variable using a segmented regression model solely based on an observation about the scatter plots. In this paper, multiple linear regressions are applied to different datasets to confirm the validity of our proposed model. In addition to dating the unknown tephras by calibration as discussed previously, another method of mapping the unknown tephras into samples of the reference set or missing samples in between consecutive reference samples is proposed. The application of these methodologies is demonstrated with both simulated and real datasets. This new proposed methodology provides an alternative, more acceptable approach for geologists as their focus is on mapping the unknown tephra with relevant eruptive events rather than estimating the age of unknown tephra. Kew words: Tephrochronology; Segmented regression

Application of compositional data analysis to geochemical data of marine sediments

In an earlier investigation (Burger et al., 2000) five sediment cores near the Rodrigues Triple Junction in the Indian Ocean were studied applying classical statistical methods (fuzzy c-means clustering, linear mixing model, principal component analysis) for the extraction of endmembers and evaluating the spatial and temporal variation of geochemical signals. Three main factors of sedimentation were expected by the marine geologists: a volcano-genetic, a hydro-hydrothermal and an ultra-basic factor. The display of fuzzy membership values and/or factor scores versus depth provided consistent results for two factors only; the ultra-basic component could not be identified. The reason for this may be that only traditional statistical methods were applied, i.e. the untransformed components were used and the cosine-theta coefficient as similarity measure. During the last decade considerable progress in compositional data analysis was made and many case studies were published using new tools for exploratory analysis of these data. Therefore it makes sense to check if the application of suitable data transformations, reduction of the D-part simplex to two or three factors and visual interpretation of the factor scores would lead to a revision of earlier results and to answers to open questions . In this paper we follow the lines of a paper of R. Tolosana- Delgado et al. (2005) starting with a problem-oriented interpretation of the biplot scattergram, extracting compositional factors, ilr-transformation of the components and visualization of the factor scores in a spatial context: The compositional factors will be plotted versus depth (time) of the core samples in order to facilitate the identification of the expected sources of the sedimentary process. Kew words: compositional data analysis, biplot, deep sea sediments

Frost jacking of joint blocks above Cwm Idwal, in North Wales

The in situ development of ground ice is a major mechanism in rock breakdown. Where well-jointed rock has been streamlined through glacial abrasion, subsequent growth of subsurface intrusive ice may lead to the uplift of individual blocks and disruption of the ice erosional landform. This jacking' mechanism is likely to be a progressive process. Following climatic change and allied ground ice decay, the degree of subsequent settlement will be controlled by the degree to which individual blocks become wedged against their neighbours. Possibly the first example to be identified in Britain is described here. It dates from a severe phase of periglaciation occurring between the Last Glacial Maximum and the Flandrian Interglacial (c. 22-11.6 ka BP). Where identified in currently temperate regions, frost-jacked blocks may be interpreted as evidence for palaeopermafrost.

Holocene tidal palaeochannels, Severn Estuary Levels, UK: a search for granulometric and foraminiferal criteria

Holocene tidal palaoechannels, Severn Estuary Levels, UK: a search for granulometric and foraminiferal criteria. Proceedings of the Geologists' Association, 117, 329-344. Grain-size characteristics (by laser granulometry) and foraminiferal assemblages have been established for silts accumulated in five, dissimilar tidal palaeochannels of mid or late Holocene age in the Severn Estuary Levels, representative of muddy tidal systems. For purposes of general comparison, similar data were obtained from a representative active tidal inlet in the area, but all of these channels have been subject to human interference and are not relied upon as a model for environmental interpretation. Although the palaeochannel deposits differ substantially in their bedding characteristics and stratigraphical relationships from the level-bedded salt-marsh platform and mudflat deposits with which they are associated, and although the channel environment is distinctive morphologically and hydraulically, no critical textural differences could be found between the channel deposits and the associated facies. Similarly, no foraminiferal assemblages distinctive of a tidal channel were encountered. Instead, the assemblages compare with those from mudflats and salt-marsh platforms. It is concluded that the sides of the subfossil channels carried some vegetation, as was observed to be the case in the modern inlet. An alternative approach is necessary if concealed palaeochannel deposits are to be recognized in muddy systems from limited numbers of subsurface samples. Although the palaeochannels afforded no characteristic textural signature, they yield transverse grain-size patterns pointing to coastal movements during their evolution. Concave-up trends suggest outward coastal building, whereas convex-up ones point to marsh-edge retreat.

The application of ichnofabrics towards bridging the dichotomy between siliciclastic and carbonate shelf facies: examples from the Upper Jurassic Fulmar Formation (UK) and the Jubaila Formation (Saudi Arabia)

An initial study of the ichnofabrics of the Upper Jurassic (Kimmeridgian) Jubaila Formation of Saudi Arabia shows that the ichnofabrics are closely matched to the relatively well-described ichnofabrics of the contemporary Fulmar Formation of the UK Continental Shelf (North Sea), in respect of the lower shoreface/offshore transition facies to offshore facies. The ichnology and ichnofabrics of the Lower Jubaila Formation show that deposition took place on an open-marine platform on the Arabian craton subject to periodic storm activity, but under a persisting equilibrium between sediment accumulation and subsidence. This is consistent with the moderately deep-marine foraminiferal assemblages and the presence of calcareous nannofossils. Cyclicity is absent, though storm beds may be grouped, in contrast with the genetic sequences present in the rift and halokinetic scenario of the North Sea. In contrast with the siliciclastic setting hardgrotinds (with Gastrochaenolites), more common firmground omission surfaces, and micritic mudstones with Chondrites and Zoophycos are notable features of the carbonate facies. In siliciclastic successions (parasequences) the latter ichnotaxa are generally regarded as having been deposited in rather deeper water, but in the carbonate Jubaila Formation are interpreted as being associated with local areas of lower turbulence. Likewise, the hardgrounds and firmgrounds, which have not been traced laterally, are tentatively regarded to be of local significance.

Field meeting: Romney Marsh - its churches and geology, 22 May 2004

The building fabrics of seven churches situated either on Romney Marsh or the marshland fringe were examined briefly. These revealed important differences in the relative abundance of the two principal building stones. Ragstones from the Hythe Formation occurred more frequently in the northeast, while sandstones from the Ashdown 'Beds' were more common in the west. In the Romney Marsh area, both stones were quarried mainly from their adjoining coastlines, with, up to the thirteenth century, opportunist collection of beach boulders generally preceding the exploitation or hewn stone. Other building stones, possible distribution routes and impacts of the quarrying upon coastline development were also discussed.

Frost jacking of joint blocks above Cwm Idwal, in North Wales

The in situ development of ground ice is a major mechanism in rock breakdown. Where well-jointed rock has been streamlined through glacial abrasion, subsequent growth of subsurface intrusive ice may lead to the uplift of individual blocks and disruption of the ice erosional landform. This jacking' mechanism is likely to be a progressive process. Following climatic change and allied ground ice decay, the degree of subsequent settlement will be controlled by the degree to which individual blocks become wedged against their neighbours. Possibly the first example to be identified in Britain is described here. It dates from a severe phase of periglaciation occurring between the Last Glacial Maximum and the Flandrian Interglacial (c. 22-11.6 ka BP). Where identified in currently temperate regions, frost-jacked blocks may be interpreted as evidence for palaeopermafrost.

Provenance of chalk tesserae from Brading Roman Villa, Isle of Wight, UK

Thin section petrographical analysis of chalk tesserae at Brading Roman Villa, Isle of Wight, England, identifies a range of planktonic foraminifera and the calcareous algal cyst Pithonella that identify the Late Cenomanian Rotalipora cushmani Biozone (BGS Foraminiferal Biozones 4iii to 7). The local chalk crop to the north of the villa includes rocks of R. cushmani Biozone age, and indicates a likely local, rather than long distance, source for the tesserae. Microfossils provide a powerful tool for identifying the provenance of artefacts in Roman Britain.

Holocene alluvial environments at Barking, Lower Thames Valley (London, UK)

Deposit modelling based on archived borehole logs supplemented by a small number of dedicated boreholes is used to reconstruct the main boundary surfaces and the thickness of the main sediment units within the succession of Holocene alluvial deposits underlying the floodplain in the Barking Reach of the Lower Thames Valley. The basis of the modelling exercise is discussed and the models are used to assess the significance of floodplain relief in determining patterns of sedimentation. This evidence is combined with the results of biostratigraphical and geochronological investigations to reconstruct the environmental conditions associated with each successive stage of floodplain aggradation. The two main factors affecting the history and spatial pattern of Holocene sedimentation are shown to be the regional behaviour of relative sea level and the pattern of relief on the surface of the sub-alluvial, Late Devensian Shepperton Gravel. As is generally the case in the Lower Thames Valley, three main stratigraphic units are recognised, the Lower Alluvium, a peat bed broadly equivalent to the Tilbury III peat of Devoy (1979) and an Upper Alluvium. There is no evidence to suggest that the floodplain was substantially re-shaped by erosion during the Holocene. Instead, the relief inherited from the Shepperton Gravel surface was gradually buried either by the accumulation of peat or by deposition of fine-grained sediment from suspension in standing or slow-moving water. The palaeoenvironmental record from Barking confirms important details of the Holocene record observed elsewhere in the Lower Thames Valley, including the presence of Taxus in the valley-floor fen carr woodland between about 5000 and 4000 cal BP, and the subsequent growth of Ulmus on the peat surface.

Integração de dados em ambiente SIG para mapeamento de favorabilidade mineral de ouro na ilha cristalina de Rivera (Uruguai)

Guias para exploração mineral são normalmente baseados em modelos conceituais de depósitos. Esses guias são, normalmente, baseados na experiência dos geólogos, em dados descritivos e em dados genéticos. Modelamentos numéricos, probabilísticos e não probabilísticos, para estimar a ocorrência de depósitos minerais é um novo procedimento que vem a cada dia aumentando sua utilização e aceitação pela comunidade geológica. Essa tese utiliza recentes metodologias para a geração de mapas de favorablidade mineral. A denominada Ilha Cristalina de Rivera, uma janela erosional da Bacia do Paraná, situada na porção norte do Uruguai, foi escolhida como estudo de caso para a aplicação das metodologias. A construção dos mapas de favorabilidade mineral foi feita com base nos seguintes tipos de dados, informações e resultados de prospecção: 1) imagens orbitais; 2) prospecção geoquimica; 3) prospecção aerogeofísica; 4) mapeamento geo-estrutural e 5) altimetria. Essas informacões foram selecionadas e processadas com base em um modelo de depósito mineral (modelo conceitual), desenvolvido com base na Mina de Ouro San Gregorio. O modelo conceitual (modelo San Gregorio), incluiu características descritivas e genéticas da Mina San Gregorio, a qual abrange os elementos característicos significativos das demais ocorrências minerais conhecidas na Ilha Cristalina de Rivera. A geração dos mapas de favorabilidade mineral envolveu a construção de um banco de dados, o processamento dos dados, e a integração dos dados. As etapas de construção e processamento dos dados, compreenderam a coleta, a seleção e o tratamento dos dados de maneira a constituírem os denominados Planos de Informação. Esses Planos de Informação foram gerados e processados organizadamente em agrupamentos, de modo a constituírem os Fatores de Integração para o mapeamento de favorabilidade mineral na Ilha Cristalina de Rivera. Os dados foram integrados por meio da utilização de duas diferentes metodologias: 1) Pesos de Evidência (dirigida pelos dados) e 2) Lógica Difusa (dirigida pelo conhecimento). Os mapas de favorabilidade mineral resultantes da implementação das duas metodologias de integração foram primeiramente analisados e interpretados de maneira individual. Após foi feita uma análise comparativa entre os resultados. As duas metodologias xxiv obtiveram sucesso em identificar, como áreas de alta favorabilidade, as áreas mineralizadas conhecidas, além de outras áreas ainda não trabalhadas. Os mapas de favorabilidade mineral resultantes das duas metodologias mostraram-se coincidentes em relação as áreas de mais alta favorabilidade. A metodologia Pesos de Evidência apresentou o mapa de favorabilidade mineral mais conservador em termos de extensão areal, porém mais otimista em termos de valores de favorabilidade em comparação aos mapas de favorabilidade mineral resultantes da implementação da metodologia Lógica Difusa. Novos alvos para exploração mineral foram identificados e deverão ser objeto de investigação em detalhe.

Uso de filmagem aérea em perspectiva no apoio à coleta de dados, na pesquisa, no ensino e na divulgação de informações em Geociências

Pós-graduação em Geociências e Meio Ambiente - IGCE