Empirical studies on software quality construction: Exploring human factors and organizational influences

Software quality has become an important research subject, not only in the Information and Communication Technology spheres, but also in other industries at large where software is applied. Software quality is not a happenstance; it is defined, planned and created into the software product throughout the Software Development Life Cycle. The research objective of this study is to investigate the roles of human and organizational factors that influence software quality construction. The study employs the Straussian grounded theory. The empirical data has been collected from 13 software companies, and the data includes 40 interviews. The results of the study suggest that tools, infrastructure and other resources have a positive impact on software quality, but human factors involved in the software development processes will determine the quality of the products developed. On the other hand, methods of development were found to bring little effect on software quality. The research suggests that software quality is an information-intensive process whereby organizational structures, mode of operation, and information flow within the company variably affect software quality. The results also suggest that software development managers influence the productivity of developers and the quality of the software products. Several challenges of software testing that affect software quality are also brought to light. The findings of this research are expected to benefit the academic community and software practitioners by providing an insight into the issues pertaining to software quality construction undertakings.

Power and Performance Management Strategies on NoC-Based Multicore Platforms, Using DVFS, Adaptive Algorithm and Task Parallelism

This work presents synopsis of efficient strategies used in power managements for achieving the most economical power and energy consumption in multicore systems, FPGA and NoC Platforms. In this work, a practical approach was taken, in an effort to validate the significance of the proposed Adaptive Power Management Algorithm (APMA), proposed for system developed, for this thesis project. This system comprise arithmetic and logic unit, up and down counters, adder, state machine and multiplexer. The essence of carrying this project firstly, is to develop a system that will be used for this power management project. Secondly, to perform area and power synopsis of the system on these various scalable technology platforms, UMC 90nm nanotechnology 1.2v, UMC 90nm nanotechnology 1.32v and UMC 0.18 μmNanotechnology 1.80v, in order to examine the difference in area and power consumption of the system on the platforms. Thirdly, to explore various strategies that can be used to reducing system’s power consumption and to propose an adaptive power management algorithm that can be used to reduce the power consumption of the system. The strategies introduced in this work comprise Dynamic Voltage Frequency Scaling (DVFS) and task parallelism. After the system development, it was run on FPGA board, basically NoC Platforms and on these various technology platforms UMC 90nm nanotechnology1.2v, UMC 90nm nanotechnology 1.32v and UMC180 nm nanotechnology 1.80v, the system synthesis was successfully accomplished, the simulated result analysis shows that the system meets all functional requirements, the power consumption and the area utilization were recorded and analyzed in chapter 7 of this work. This work extensively reviewed various strategies for managing power consumption which were quantitative research works by many researchers and companies, it's a mixture of study analysis and experimented lab works, it condensed and presents the whole basic concepts of power management strategy from quality technical papers.

Développement logiciel par transformation de modèles

La recherche en génie logiciel a depuis longtemps tenté de mieux comprendre le processus de développement logiciel, minimalement, pour en reproduire les bonnes pratiques, et idéalement, pour pouvoir le mécaniser. On peut identifier deux approches majeures pour caractériser le processus. La première approche, dite transformationnelle, perçoit le processus comme une séquence de transformations préservant certaines propriétés des données à l’entrée. Cette idée a été récemment reprise par l’architecture dirigée par les modèles de l’OMG. La deuxième approche consiste à répertorier et à codifier des solutions éprouvées à des problèmes récurrents. Les recherches sur les styles architecturaux, les patrons de conception, ou les cadres d’applications s’inscrivent dans cette approche. Notre travail de recherche reconnaît la complémentarité des deux approches, notamment pour l’étape de conception: dans le cadre du développement dirigé par les modèles, nous percevons l’étape de conception comme l’application de patrons de solutions aux modèles reçus en entrée. Il est coutume de définir l’étape de conception en termes de conception architecturale, et conception détaillée. La conception architecturale se préoccupe d’organiser un logiciel en composants répondant à un ensemble d’exigences non-fonctionnelles, alors que la conception détaillée se préoccupe, en quelque sorte, du contenu de ces composants. La conception architecturale s’appuie sur des styles architecturaux qui sont des principes d’organisation permettant d’optimiser certaines qualités, alors que la conception détaillée s’appuie sur des patrons de conception pour attribuer les responsabilités aux classes. Les styles architecturaux et les patrons de conception sont des artefacts qui codifient des solutions éprouvées à des problèmes récurrents de conception. Alors que ces artefacts sont bien documentés, la décision de les appliquer reste essentiellement manuelle. De plus, les outils proposés n’offrent pas un support adéquat pour les appliquer à des modèles existants. Dans cette thèse, nous nous attaquons à la conception détaillée, et plus particulièrement, à la transformation de modèles par application de patrons de conception, en partie parce que les patrons de conception sont moins complexes, et en partie parce que l’implémentation des styles architecturaux passe souvent par les patrons de conception. Ainsi, nous proposons une approche pour représenter et appliquer les patrons de conception. Notre approche se base sur la représentation explicite des problèmes résolus par ces patrons. En effet, la représentation explicite du problème résolu par un patron permet : (1) de mieux comprendre le patron, (2) de reconnaître l’opportunité d’appliquer le patron en détectant une instance de la représentation du problème dans les modèles du système considéré, et (3) d’automatiser l’application du patron en la représentant, de façon déclarative, par une transformation d’une instance du problème en une instance de la solution. Pour vérifier et valider notre approche, nous l’avons utilisée pour représenter et appliquer différents patrons de conception et nous avons effectué des tests pratiques sur des modèles générés à partir de logiciels libres.

Identification et localisation des préoccupations fonctionnelles dans un code légataire Java

Traditionnellement, les applications orientées objets légataires intègrent différents aspects fonctionnels. Ces aspects peuvent être dispersés partout dans le code. Il existe différents types d’aspects : • des aspects qui représentent des fonctionnalités métiers ; • des aspects qui répondent à des exigences non fonctionnelles ou à d’autres considérations de conception comme la robustesse, la distribution, la sécurité, etc. Généralement, le code qui représente ces aspects chevauche plusieurs hiérarchies de classes. Plusieurs chercheurs se sont intéressés à la problématique de la modularisation de ces aspects dans le code : programmation orientée sujets, programmation orientée aspects et programmation orientée vues. Toutes ces méthodes proposent des techniques et des outils pour concevoir des applications orientées objets sous forme de composition de fragments de code qui répondent à différents aspects. La séparation des aspects dans le code a des avantages au niveau de la réutilisation et de la maintenance. Ainsi, il est important d’identifier et de localiser ces aspects dans du code légataire orienté objets. Nous nous intéressons particulièrement aux aspects fonctionnels. En supposant que le code qui répond à un aspect fonctionnel ou fonctionnalité exhibe une certaine cohésion fonctionnelle (dépendances entre les éléments), nous proposons d’identifier de telles fonctionnalités à partir du code. L’idée est d’identifier, en l’absence des paradigmes de la programmation par aspects, les techniques qui permettent l’implémentation des différents aspects fonctionnels dans un code objet. Notre approche consiste à : • identifier les techniques utilisées par les développeurs pour intégrer une fonctionnalité en l’absence des techniques orientées aspects • caractériser l’empreinte de ces techniques sur le code • et développer des outils pour identifier ces empreintes. Ainsi, nous présentons deux approches pour l’identification des fonctionnalités existantes dans du code orienté objets. La première identifie différents patrons de conception qui permettent l’intégration de ces fonctionnalités dans le code. La deuxième utilise l’analyse formelle de concepts pour identifier les fonctionnalités récurrentes dans le code. Nous expérimentons nos deux approches sur des systèmes libres orientés objets pour identifier les différentes fonctionnalités dans le code. Les résultats obtenus montrent l’efficacité de nos approches pour identifier les différentes fonctionnalités dans du code légataire orienté objets et permettent de suggérer des cas de refactorisation.

Development of a portable composite equipment for coastal fishery and hydrographic investigations

This thesis reports on the details of the works done to develop a complete system for acquisition of the important marine environmental parameters namely, current, current direction, salinity, temperature and depth. It encompaéps transducers,signalconditioners display arrangements and remote controlled multiplexer which constitue the system. The various associate instruentation and environmental requisites and problems have been discussed and solved to considerable extend. The design and development features of this composite system includes an integrated approach in order to make the final equipment to be simple, inexpensive and easy for operation from small and large boats. This could be achieved with the successful development of all required components with features matching between them, such as sensors, signals conditioners remote operated multiplexers, comon display methods, quick performance check and calibration methods. The major success rests on the development of sensors with excellent performance characteristics suitable for marine environment. out of the 5 sensors. that of current salinity and depth are quite noval types with specific advantages. The environmental effects have been eliminated to the required extend. The common signal conditioner for salinity, temperature and depth has noval design features for achieving simplicity, reliability and accomodating the three sensors of different functional requirements.

A Generic Software Architecture for a Domain Specific Distributed Embedded System

In this paper, we have evolved a generic software architecture for a domain specific distributed embedded system. The system under consideration belongs to the Command, Control and Communication systems domain. The systems in such domain have very long operational lifetime. The quality attributes of these systems are equally important as the functional requirements. The main guiding principle followed in this paper for evolving the software architecture has been functional independence of the modules. The quality attributes considered most important for the system are maintainability and modifiability. Architectural styles best suited for the functionally independent modules are proposed with focus on these quality attributes. The software architecture for the system is envisioned as a collection of architecture styles of the functionally independent modules identified

Reducció de vibracions residuals en moviments transitoris. Definició de lleis de moviment per mitjà de corbes B-spline

Molts sistemes mecànics existents tenen un comportament vibratori funcionalment perceptible, que es posa de manifest enfront d'excitacions transitòries. Normalment, les vibracions generades segueixen presents després del transitori (vibracions residuals), i poden provocar efectes negatius en la funció de disseny del mecanisme. El mètode que es proposa en aquesta tesi té com a objectiu principal la síntesi de lleis de moviment per reduir les vibracions residuals. Addicionalment, els senyals generats permeten complir dues condicions definides per l'usuari (anomenats requeriments funcionals). El mètode es fonamenta en la relació existent entre el contingut freqüencial d'un senyal transitori, i la vibració residual generada, segons sigui l'esmorteïment del sistema. Basat en aquesta relació, i aprofitant les propietats de la transformada de Fourier, es proposa la generació de lleis de moviment per convolució temporal de polsos. Aquestes resulten formades per trams concatenats de polinomis algebraics, cosa que facilita la seva implementació en entorns numèrics per mitjà de corbes B-spline.

Semiotic modelling for complex enterprise systems

An enterprise is viewed as a complex system which can be engineered to accomplish organisational objectives. Systems analysis and modelling will enable to the planning and development of the enterprise and IT systems. Many IT systems design methods focus on functional and non-functional requirements of the IT systems. Most methods are normally capable of one but leave out other aspects. Analysing and modelling of both business and IT systems may often have to call on techniques from various suites of methods which may be placed on different philosophic and methodological underpinnings. Coherence and consistency between the analyses are hard to ensure. This paper introduces the Problem Articulation Method (PAM) which facilitates the design of an enterprise system infrastructure on which an IT system is built. Outcomes of this analysis represent requirements which can be further used for planning and designing a technical system. As a case study, a finance system, Agresso, for e-procurement has been used in this paper to illustrate the applicability of PAM in modelling complex systems.

Goals Software Construction Process

Generalized hyper competitiveness in the world markets has determined the need to offer better products to potential and actual clients in order to mark an advantagefrom other competitors. To ensure the production of an adequate product, enterprises need to work on the efficiency and efficacy of their business processes (BPs) by means of the construction of Interactive Information Systems (IISs, including Interactive Multimedia Documents) so that they are processed more fluidly and correctly.The construction of the correct IIS is a major task that can only be successful if the needs from every intervenient are taken into account. Their requirements must bedefined with precision, extensively analyzed and consequently the system must be accurately designed in order to minimize implementation problems so that the IIS isproduced on schedule and with the fewer mistakes as possible. The main contribution of this thesis is the proposal of Goals, a software (engineering) construction process which aims at defining the tasks to be carried out in order to develop software. This process defines the stakeholders, the artifacts, and the techniques that should be applied to achieve correctness of the IIS. Complementarily, this process suggests two methodologies to be applied in the initial phases of the lifecycle of the Software Engineering process: Process Use Cases for the phase of requirements, and; MultiGoals for the phases of analysis and design. Process Use Cases is a UML-based (Unified Modeling Language), goal-driven and use case oriented methodology for the definition of functional requirements. It uses an information oriented strategy in order to identify BPs while constructing the enterprise’s information structure, and finalizes with the identification of use cases within the design of these BPs. This approach provides a useful tool for both activities of Business Process Management and Software Engineering. MultiGoals is a UML-based, use case-driven and architectural centric methodology for the analysis and design of IISs with support for Multimedia. It proposes the analysis of user tasks as the basis of the design of the: (i) user interface; (ii) the system behaviour that is modeled by means of patterns which can combine Multimedia and standard information, and; (iii) the database and media contents. This thesis makes the theoretic presentation of these approaches accompanied with examples from a real project which provide the necessary support for the understanding of the used techniques.

A JML-Based strategy for incorporating formal specifications into the software development process

This thesis presents a JML-based strategy that incorporates formal specifications into the software development process of object-oriented programs. The strategy evolves functional requirements into a “semi-formal” requirements form, and then expressing them as JML formal specifications. The strategy is implemented as a formal-specification pseudo-phase that runs in parallel with the other phase of software development. What makes our strategy different from other software development strategies used in literature is the particular use of JML specifications we make all along the way from requirements to validation-and-verification.

Análise de desempenho de sistemas distribuídos de grande porte na plataforma Java

The lava Platform is increasing1y being adopted in the development of distributed sys¬tems with higb user demando This kind of application is more complex because it needs beyond attending the functional requirements, to fulfil1 the pre-established performance parameters. This work makes a study on the Java Vutual Machine (JVM), approaching its intemal aspects and exploring the garbage collection strategies existing in the literature and used by the NM. It also presents a set of tools that helps in the job of optimizing applications and others that help in the monitoring of applications in the production envi¬ronment. Doe to the great amount of technologies that aim to solve problems which are common to the application layer, it becomes difficult to choose the one with best time response and less memory usage. This work presents a brief introduction to each one of tbe possible technologies and realize comparative tests through a statistical analysis of the response time and garbage collection activity random variables. The obtained results supply engineers and managers with a subside to decide which technologies to use in large applications through the knowledge of how they behave in their environments and the amount of resources that they consume. The relation between the productivity of the technology and its performance is also considered ao important factor in this choice

SOA-DB: uma arquitetura embarcada orientada a serviço para acesso a dispositivos biomédicos

The great diversity in the architecture of biomedical devices, coupled with their different communication protocols, has hindered the implementation of systems that need to make access to these devices. Given these differences, the need arises to provide access to such a transparent manner. In this sense, this paper proposes an embedded architecture, service-oriented, for access to biomedical devices, as a way to abstract the mechanism for writing and reading data on these devices, thereby contributing to the increase in quality and productivity of biomedical systems so as to enable that, the focus of the development team of biomedical software, is almost exclusively directed to its functional requirements

Desenvolvimento de têxteis técnicos para reforço de compósitos poliméricos

Materials denominated technical textiles can be defined as structures designed and developed with function to fulfill specific functional requirements of various industrial sectors as are the cases of the automotive and aerospace industries. In this aspect the technical textiles are distinguished from conventional textile materials, in which the aesthetic and of comfort needs are of primordial importance. Based on these considerations, the subject of this dissertation was established having as its main focus the study of development of textile structures from aramid and glass fibers and acting in order to develop the manufacture of composite materials that combine properties of two different structures, manufactured in an identical operation, where each structure contributes to improving the properties of the resulting composite material. Therefore were created in laboratory scale, textile structures with low weight and different composition: aramid (100%), glass (100%) and aramid /glass (65/35%), in order to use them as a reinforcing element in composite materials with polyester matrix. These composites were tested in tension and its fracture surface, evaluated by MEV. Based on the analysis of mechanical properties of the developed composites, the efficiency of the structures prepared as reinforcing element were testified by reason of that the resistance values of the composites are far superior to the polyester matrix. It was also observed that hybridization in tissue structure was efficient, since the best results obtained were for hybrid composites, where strength to the rupture was similar to the steel 1020, reaching values on the order of 340 MPa

Avaliação da estrutura de tecidos técnicos como elemento reforçante em compósitos poliméricos sistema poliéster isoftálico

Materials known as technical textiles can be defined as structures designed and developed to meet specific functional requirements of various industry sectors, which is the case in automotive and aerospace industries, and other specific applications. Therefore, the purpose of this work presents the development and manufacture of polymer composite with isophthalic polyester resin. The reinforcement of the composite structure is a technical textile fabric made from high performance fibers, aramid (Kevlar 49) and glass fiber E. The fabrics are manufactured by the same method, with the aim of improving the tensile strength of the resulting polymer composite material. The fabrics, we developed some low grammage technical textile structures in laboratory scale and differentiated-composition type aramid (100%), hybrid 1 aramid fiber / glass (65/35%) and hybrid 2 aramid fiber / glass (85/15% ) for use as a reinforcing element in composite materials with unsaturated isophthalic polyester matrix. The polymer composites produced were tested in uniaxial tensile fracture surface and it´s evaluated by SEM. The purpose of this work characterize the performance of polymer composites prepared, identifying changes and based on resistance to strain corresponding to the mechanical behavior. The objectives are to verify the capability of using this reinforcement structure, along with the use of high performance fibers and resin in terms of workability and mechanical strength; verify the adherence of the fiber to the matrix and the fracture surface by electron microscopy scanning and determination of tensile strength by tensile test. The results indicate that, in a comparative study to the response of uniaxial tensile test for tensile strength of the composites and the efficiency of the low percentage of reinforcement element, being a technical textile fabric structure that features characteristic of lightness and low weight added in polymer composites

Uma proposta de framework como infra-estrutura de implementação de sistemas informacionais baseados na visão dos FRBR orientado a objetos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)