Definición, diseño e implementación de métricas de usuario final sobre componentes web en el lado Front-end, mediante Google Analytics

La web ha evolucionado hacia la participación en la creación de contenido tanto por desarrolladores expertos como por usuarios finales sin un gran conocimiento en esta área. A pesar de que su uso es igual de válido y funcional, las diferencias entre la calidad de los productos desarrollados por ambos puede llegar a ser considerable. Esta característica se observa con mayor claridad cuando se analizan los web components. El trabajo consiste en el desarrollo de un entorno capaz de recoger las métricas de calidad de los componentes, basadas en la interacción con ellos por parte de los usuarios. A partir de las métricas obtenidas, se determinará su calidad para realizar una mejora de la misma, en función de las características valoradas. La selección de las métricas se realiza mediante un estudio de las características que definen a un componente, y permiten ser analizadas. Para poder llevar a cabo la construcción del portal, se ha descrito un prototipo capaz de proporcionar un sistema para permitir que los componentes intercambien información entre ellos. El modelo ha sido integrado en los componentes que se han de evaluar para obtener nuevas métricas sobre esta característica. Se ha desarrollado un dashboard que permite la interacción sin limitaciones de los usuarios con los componentes, facilitándoles un sistema para conectar componentes, utilizando para ello el sistema previamente descrito. Como conclusión del trabajo, se puede observar la necesidad de integrar los componentes web en un entorno real para poder determinar su calidad. Debido a que la calidad está determinada por los usuarios que consumen los componentes, se ha de contar con su opinión en la cuantificación de la misma.---ABSTRACT---Recently, the web has evolved to the collaboration between professional developers and end users with limited knowledge to create web content. Although both solutions are correct and functional, the differences in the quality between them can be appreciable. This feature is shown clearly when the web components are analyzed. The work is composed of the development of a virtual environment which is able to pick the quality measures of the components, based on the interaction between these components and the user. The measures are the starting point to decide the quality, and improve them with the rated measures. The measures selection is done through a study of the main features of a component. This selection can be analyzed. In order to create the website, a prototype has been specified to provide a system in which the components can be trade information between them. The interconnection model has been integrated in the components to evaluate. A dashboard has been developed to allow users interacting with the components without rules, making them possible connecting components through the model. The main conclusion of the work is the necessity of integrating web components in a real environment to decide their quality. Due to the fact that the quality is measured in terms of the rate of the users, it is a must to give them the main roles in the establishment of that quality.

Mejoras y extensiones en el Front-End de un modelo de predicción de acciones de un estudiante en un laboratorio virtual 3D

Este documento presenta las mejoras y las extensiones introducidas en la herramienta de visualización del modelo predictivo del comportamiento del estudiante o Student Behavior Predictor Viewer (SBPV), implementada en un trabajo anterior. El modelo predictivo del comportamiento del estudiante es parte de un sistema inteligente de tutoría, y se construye a partir de los registros de actividad de los estudiantes en un laboratorio virtual 3D, como el Laboratorio Virtual de Biotecnología Agroforestal, implementado en un trabajo anterior, y cuyos registros de actividad de los estudiantes se han utilizado para validar este trabajo fin de grado. El SBPV es una herramienta para visualizar una representación gráfica 2D del grafo extendido asociado con cualquiera de los clusters del modelo predictivo del estudiante. Además de la visualización del grafo extendido, el SBPV controla la navegación a través del grafo por medio del navegador web. Más concretamente, el SBPV permite al usuario moverse a través del grafo, ampliar o reducir el zoom del gráfico o buscar un determinado estado. Además, el SBPV también permite al usuario modificar el diseño predeterminado del grafo en la pantalla al cambiar la posición de los estados con el ratón. Como parte de este trabajo fin de grado, se han corregido errores existentes en la versión anterior y se han introducido una serie de mejoras en el rendimiento y la usabilidad. En este sentido, se han implementado nuevas funcionalidades, tales como la visualización del modelo de comportamiento de cada estudiante individualmente o la posibilidad de elegir el método de clustering para crear el modelo predictivo del estudiante; así como ha sido necesario rediseñar la interfaz de usuario cambiando el tipo de estructuras gráficas con que se muestran los elementos del modelo y mejorando la visualización del grafo al interaccionar el usuario con él. Todas estas mejoras se explican detenidamente en el presente documento.---ABSTRACT---This document presents the improvements and extensions made to the visualization tool Student Behavior Predictor Viewer (SBPV), implemented in a previous job. The student behavior predictive model is part of an intelligent tutoring system, and is built from the records of students activity in a 3D virtual laboratory, like the “Virtual Laboratory of Agroforestry Biotechnology” implemented in a previous work, and whose records of students activity have been used to validate this final degree work. The SBPV is a tool for visualizing a 2D graphical representation of the extended graph associated with any of the clusters of the student predictive model. Apart from visualizing the extended graph, the SBPV supports the navigation across the graph by means of desktop devices. More precisely, the SBPV allows user to move through the graph, to zoom in/out the graphic or to locate a given state. In addition, the SBPV also allows user to modify the default layout of the graph on the screen by changing the position of the states by means of the mouse. As part of this work, some bugs of the previous version have been fixed and some enhancements have been implemented to improve the performance and the usability. In this sense, we have implemented new features, such as the display of the model behavior of only one student or the possibility of selecting the clustering method to create the student predictive model; as well as it was necessary to redesign the user interface changing the type of graphic structures that show model elements and improving the rendering of the graph when the user interacts with it. All these improvements are explained in detail in the next sections.

Noise and PSRR improvement technique for TPC readout front-end in CMOS. technology.

ALICE is one of four major experiments of particle accelerator LHC installed in the European laboratory CERN. The management committee of the LHC accelerator has just approved a program update for this experiment. Among the upgrades planned for the coming years of the ALICE experiment is to improve the resolution and tracking efficiency maintaining the excellent particles identification ability, and to increase the read-out event rate to 100 KHz. In order to achieve this, it is necessary to update the Time Projection Chamber detector (TPC) and Muon tracking (MCH) detector modifying the read-out electronics, which is not suitable for this migration. To overcome this limitation the design, fabrication and experimental test of new ASIC named SAMPA has been proposed . This ASIC will support both positive and negative polarities, with 32 channels per chip and continuous data readout with smaller power consumption than the previous versions. This work aims to design, fabrication and experimental test of a readout front-end in 130nm CMOS technology with configurable polarity (positive/negative), peaking time and sensitivity. The new SAMPA ASIC can be used in both chambers (TPC and MCH). The proposed front-end is composed of a Charge Sensitive Amplifier (CSA) and a Semi-Gaussian shaper. In order to obtain an ASIC integrating 32 channels per chip, the design of the proposed front-end requires small area and low power consumption, but at the same time requires low noise. In this sense, a new Noise and PSRR (Power Supply Rejection Ratio) improvement technique for the CSA design without power and area impact is proposed in this work. The analysis and equations of the proposed circuit are presented which were verified by electrical simulations and experimental test of a produced chip with 5 channels of the designed front-end. The measured equivalent noise charge was <550e for 30mV/fC of sensitivity at a input capacitance of 18.5pF. The total core area of the front-end was 2300?m × 150?m, and the measured total power consumption was 9.1mW per channel.

DESIGN OF A MINIATURIZED SOP INTEGRATED GNSS RF FRONT-END MODULE

Navigation devices used to be bulky and expensive and were not widely commercialized for personal use. Nowadays, all useful electronic devices are turning into being handheld so that they can be conveniently used anytime and anywhere. One can claim that almost any mobile phone, used today, has quite strong navigational capabilities that can efficiently work anywhere in the globe. No matter where you are, you can easily know your exact location and make your way smoothly to wherever you would like to go. This couldn’t have been made possible without the existence of efficient and small microwave circuits responsible for the transmission and reception of high quality navigation signals. This thesis is mainly concerned with the design of novel highly miniaturized and efficient filtering components working in the Global Navigational Satellite Systems (GNSS) frequency band to be integrated within an efficient Radio Frequency (RF) front-end module (FEM). A System-on-Package (SoP) integration technique is adopted for the design of all the components in this thesis. Two novel miniaturized filters are designed, where one of them is a wideband filter targeting the complete GNSS band with a fractional bandwidth of almost 50% at a center frequency of 1.385 GHz. This filter utilizes a direct inductive coupling topology to achieve the required wide band performance. It also has very good out-of-band rejection and low IL. Whereas the other dual band filter will only cover the lower and upper GNSS bands with a rejection notch in between the two bands. It has very good inter band rejection. The well-known “divide and conquer” design methodology was applied for the design of this filter to help save valuable design and optimization time. Moreover, the performance of two commercially available ultra-Low Noise Amplifiers (LNAs) is studied. The complete RF FEM showed promising preliminary performance in terms of noise figure, gain and bandwidth, where it out performed other commercial front-ends in these three aspects. All the designed circuits are fabricated and tested. The measured results are found to be in good agreements with the simulations.

Validation of the reduction of rear-end collisions by a high-mounted auxiliary stoplamp. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

An evaluation of occupant protection in frontal interior impact for unrestrained front seat occupants of cars and light trucks. Technical report.

Mode of access: Internet.

Using front-end and formative evaluation to design and test persuasive bird feeding warning signs

Wildlife feeding is a wide-spread and controversial practice that can pose serious threats to the safety of both wildlife and visitors. The design and effectiveness of warning signs in recreational areas varies considerably and is rarely the product of theoretical models or scientific research. This study uses front-end and formative evaluation to design and test the perceived effectiveness of warning signs relating to bird feeding. Stage One examined visitors' beliefs, attitudes and bird feeding behaviour and found significant differences between feeders and non-feeders. Stage Two involved designing and evaluating three signs that built on the beliefs, knowledge and mis/conceptions identified in Stage One. Respondents thought the sign that focused on the birds' health and safety would be the most persuasive, however, elements of the other two signs were also positively evaluated. The article concludes with recommendations for the wording of future bird feeding warning signs. (c) 2004 Elsevier Ltd. All rights reserved.

The development of a new compiler-compiler front-end

The increasing cost of developing complex software systems has created a need for tools which aid software construction. One area in which significant progress has been made is with the so-called Compiler Writing Tools (CWTs); these aim at automated generation of various components of a compiler and hence at expediting the construction of complete programming language translators. A number of CWTs are already in quite general use, but investigation reveals significant drawbacks with current CWTs, such as lex and yacc. The effective use of a CWT typically requires a detailed technical understanding of its operation and involves tedious and error-prone input preparation. Moreover, CWTs such as lex and yacc address only a limited aspect of the compilation process; for example, actions necessary to perform lexical symbol valuation and abstract syntax tree construction must be explicitly coded by the user. This thesis presents a new CWT called CORGI (COmpiler-compiler from Reference Grammar Input) which deals with the entire `front-end' component of a compiler; this includes the provision of necessary data structures and routines to manipulate them, both generated from a single input specification. Compared with earlier CWTs, CORGI has a higher-level and hence more convenient user interface, operating on a specification derived directly from a `reference manual' grammar for the source language. Rather than developing a compiler-compiler from first principles, CORGI has been implemented by building a further shell around two existing compiler construction tools, namely lex and yacc. CORGI has been demonstrated to perform efficiently in realistic tests, both in terms of speed and the effectiveness of its user interface and error-recovery mechanisms.

The implementation of a functional query language front-end to a relational database system. Available in 2 volumes.

Database systems have a user interface one of the components of which will normally be a query language which is based on a particular data model. Typically data models provide primitives to define, manipulate and query databases. Often these primitives are designed to form self-contained query languages. This thesis describes a prototype implementation of a system which allows users to specify queries against the database in a query language whose primitives are not those provided by the actual model on which the database system is based, but those provided by a different data model. The implementation chosen is the Functional Query Language Front End (FQLFE). This uses the Daplex functional data model and query language. Using FQLFE, users can specify the underlying database (based on the relational model) in terms of Daplex. Queries against this specified view can then be made in Daplex. FQLFE transforms these queries into the query language (Quel) of the underlying target database system (Ingres). The automation of part of the Daplex function definition phase is also described and its implementation discussed.

Especificações e concepções de front-end UHF integrado e multipadrão em tecnologia CMOS 130nm

The Brazilian Environmental Data Collecting System (SBCDA) collects and broadcasts meteorological and environmental data, to be handled by dozens of institutions and organizations. The system space segment, composed by the data collecting satellites, plays an important role for the system operation. To ensure the continuity and quality of these services, efforts are being made to the development of new satellite architectures. Aiming a reduction of size and power consumption, the design of an integrated circuit containing a receiver front-end is proposed, to be embedded in the next SBCDA satellite generations. The circuit will also operate under the requirements of the international data collecting standard ARGOS. This work focuses on the design of an UHF low noise amplifier and mixers in a CMOS standard technology. The specifi- cations are firstly described and the circuit topologies presented. Then the circuit conception is discussed and the design variables derived. Finally, the layout is designed and the final results are commented. The chip will be fabricated in a 130 nm technology from ST Microelectronics.

DESIGN OF A MINIATURIZED SOP INTEGRATED GNSS RF FRONT-END MODULE

Navigation devices used to be bulky and expensive and were not widely commercialized for personal use. Nowadays, all useful electronic devices are turning into being handheld so that they can be conveniently used anytime and anywhere. One can claim that almost any mobile phone, used today, has quite strong navigational capabilities that can efficiently work anywhere in the globe. No matter where you are, you can easily know your exact location and make your way smoothly to wherever you would like to go. This couldn’t have been made possible without the existence of efficient and small microwave circuits responsible for the transmission and reception of high quality navigation signals. This thesis is mainly concerned with the design of novel highly miniaturized and efficient filtering components working in the Global Navigational Satellite Systems (GNSS) frequency band to be integrated within an efficient Radio Frequency (RF) front-end module (FEM). A System-on-Package (SoP) integration technique is adopted for the design of all the components in this thesis. Two novel miniaturized filters are designed, where one of them is a wideband filter targeting the complete GNSS band with a fractional bandwidth of almost 50% at a center frequency of 1.385 GHz. This filter utilizes a direct inductive coupling topology to achieve the required wide band performance. It also has very good out-of-band rejection and low IL. Whereas the other dual band filter will only cover the lower and upper GNSS bands with a rejection notch in between the two bands. It has very good inter band rejection. The well-known “divide and conquer” design methodology was applied for the design of this filter to help save valuable design and optimization time. Moreover, the performance of two commercially available ultra-Low Noise Amplifiers (LNAs) is studied. The complete RF FEM showed promising preliminary performance in terms of noise figure, gain and bandwidth, where it out performed other commercial front-ends in these three aspects. All the designed circuits are fabricated and tested. The measured results are found to be in good agreements with the simulations.

Análisis y simulación de un rectificador trifásico controlado Active Front End (AFE)

Este artículo presenta un resultado de investigación financiado con recursos propios en el que se expone un modelo en espacio de estados de un rectificador trifásico controlado active front end. Utilizando este modelo se deriva una ley de control orientado al voltaje (VOC), enfocado en el comportamiento como carga resistiva, factor de potencia unitario, el cual es probado mediante simulación usando el Toolbox SimPowerSystem en Simulink de Matlab®.

Front end development for building automation systems using JavaScript Frameworks

Automation technologies are widely acclaimed to have the potential to significantly reduce energy consumption and energy-related costs in buildings. However, despite the abundance of commercially available technologies, automation in domestic environments keep on meeting commercial failures. The main reason for this is the development process that is used to build the automation applications, which tend to focus more on technical aspects rather than on the needs and limitations of the users. An instance of this problem is the complex and poorly designed home automation front-ends that deter customers from investing in a home automation product. On the other hand, developing a usable and interactive interface is a complicated task for developers due to the multidisciplinary challenges that need to be identified and solved. In this context, the current research work investigates the different design problems associated with developing a home automation interface as well as the existing design solutions that are applied to these problems. The Qualitative Data Analysis approach was used for collecting data from research papers and the open coding process was used to cluster the findings. From the analysis of the data collected, requirements for designing the interface were derived. A home energy management functionality for a Web-based home automation front-end was developed as a proof-of-concept and a user evaluation was used to assess the usability of the interface. The results of the evaluation showed that this holistic approach to designing interfaces improved its usability which increases the chances of its commercial success.

An analysis of the crash experience of light trucks equipped with antilock braking systems. Technical report.

Mode of access: Internet.

An analysis of the crash experience of passenger cars equipped with antilock braking systems. Technical report.

Mode of access: Internet.