Obtenção de filtro cerâmico a partir da diatomita e casca de arroz carbonizada visando tratamento de efluente têxtil

The effluents released by the textile industry have high concentrations of alkali, carbohydrates, proteins, in addition to colors containing heavy metals. Therefore, a filter was prepared aiming primarily to the removal of color. In order to prepare this filter, rice hulls and diatomite were used, which have in their structure, basically amorphous hydrated silica. The silica exists in three crystalline forms: quartz, tridymite and cristobalite. In accordance with the above considerations, this study was divided into two stages; the first corresponds to the preparation of the filter and the second to carry out the tests in the effluent/filter in order to verify the efficiency of the color removal. First, the raw material was subjected to a chemical analysis and XRD, and then the diatomite was mixed, via humid, with a planetarium windmill with 20 %, 40 %, 60 % and 80 % of rice husk ash. To the mixture, 5 % carboxymethylcellulose (CMC) was added as a binder at room temperature. The samples were uniaxially compacted into metallic matrix of 0.3 x 0.1 cm² of area at a pressure of 167 MPa by means of hydraulic press and then sintered at temperatures of 1,000 °C, 1,200 °C and 1,400 °C for 1 h and submitted to granulometry test using laser, linear retraction, water absorption, apparent porosity and resistance to bending, DTA, TMA and XRD. To examine the pore structure of the samples scanning electron microscope (SEM) was used. Also tests were carried out in a mercury porosimeter to verify the average size of the pores and real density of the samples. In the second stage, samples of the effluent were collected from a local industry, whose name will be preserved, located in Igapó, in the State of Rio Grande do Norte - RN. The effluent was first pretreated before filtration and then subjected to a treatment of flotation. The effluent was then characterized before and after filtration, with parameters of color, turbidity, suspended solids, pH, chemical and biochemical oxygen demand (COD and BOD). Thus, through the XRD analysis the formation of cristobalite α in all samples was observed. The best average size of pore was found to be 1.75 μm with 61.04 % apparent porosity, thus obtaining an average 97.9 % color removal and 99.8 % removal of suspended solid

Estudo do aproveitamento do rejeito da mineração de esmeraldas na produção de refratários conformados isolantes

Emerald mining is an important area of the economy in Brazil, country which is in second place among the exporting nations of this gem. Due to the process of extraction, a great amount of reject is generated. Since there is no appropriate destination, the reject is abandoned around the mining industries, contributing to environment degradation. Nowadays, some of the most relevant things to an industry in general are: energy conservation, cost reduction, quality and productivity enhancement. The production of isolating, transformed refractory materials achieves the sustainability dimension when protection of the environment is incorporated to such process. This work investigates the use of emerald mining rejects in the ceramic body of refractory materials, aiming at obtaining a product whose characteristics are compatible with commercial products and, at the same time, allow the use of such rejects to solve the environmental issue caused by its disposal in nature. X-ray fluorescence analysis show that the emerald reject obtained after the flotation to extract molybdenum and mica has 70% of silica and alumina (SiO2+Al2O3) and 21% of a basic oxides and alkaline metals and earthy alkaline mixture (Na2O, K2O, CaO e MgO). Because of the significant amount of silica and alumina present in the reject, four refractory ceramic bodies were prepared. Samples with a rectangular shape and dimensions 100x50x10 mm were pressed in a steel mold at 27,5 MPa and sintered at 1200ºC for 40 min. under environment atmosphere in a resistive oven. The sintered samples were characterized in relation to the chemical composition (FRX), mineralogical composition (DRX), microstructure (MEV) and physical and mechanical properties. The results indicate that the mixture with 45% of reject, 45% of alumina and 10% of kaolin presents a refractory quality of 1420ºC, dimensional linear variation below 2.00%, apparent specific mass of 1,56 g/cm3 and porosity of 46,68%, which demonstrates the potential use of the reject as raw material for the industry of isolating transformed refractory materials

Uso do pó da palha de carnaúba em compósitos de quitosana

In this work a biodegradable composite using the carnauba straw s powder as reinforcement on chitosan matrix polymeric were manufactured. Firstly, were carried out the chemistry characterization of the carnauba straw s powder before and after treatments with NaOH and hexane. Goering and Van Soest method (1970), flotation test, moisture absorption, FTIR, TG/DTG, DSC and SEM have also being carried out. Composites were developed with variations in granulometry and in powder concentrations. They were characterized by TG/DTG, SEM and mechanicals properties. The results of chemical composition showed that the carnauba straw s powder is composed of 41% of cellulose; 28,9% of hemicellulose and 14% of lignin.The flotation test have indicated that the chemical treatment with NaOH decreased the powder s hidrophilicity.The thermal analysis showed increased of thermal stability of material after treatments. The results of FTIR and SEM revealed the removal of soluble materials from the powder (hemicelluloses and lignin), the material became rougher and clean. The composites obtained showed that the mechanicals properties of the composites were decreased in respect at chitosan films, and the composites with the powder at 150 Mesh showed less variation in the modulus values. The speed test of 10 mm/min showed the better reproducibility of the results and is in agreement to the standard ASTM D638. The SEM analysis of fracture showed the low adhesion between the fiber/matrix. The increase of volume of powder in the composite caused a decrease in values of stress and strain for the samples with untreated powder and treated with hexane. The composite with 50% of the powder s treated in NaOH didn t have significant variation in the values of stress and strain as compared with the composites with 10% of the powder, showing that the increase in the volume of fiber didn t affect the stress and strain of the composite. Thereby, it is concluded that the manufacture of polymeric composites of chitosan using carnauba straw s powder can be done, without need for pre-treatment of reinforcement, become the couple of carnauba straw s powder-chitosan a good alternative for biodegradable composites

Geofungos no Córrego do Sapateiro, Parque Municipal do Ibirapuera, São Paulo, SP, Brasil

No Córrego do Sapateiro, situado no Parque Municipal do Ibirapuera, na cidade de São Paulo, SP, Brasil, amostras de água (50 mL) na profundidade de 10 centímetros foram coletadas em locais antes (local 1) e depois (local 2) da estação de tratamento de flotação, durante os meses da estação chuvosa e quente (janeiro, fevereiro e março) e da estação seca e fria (junho, julho e agosto) de 2008. Além disso, a temperatura, oxigênio dissolvido, condutividade e pH da água foram medidos com um equipamento Horiba U10. Coliformes totais e fecais foram analisados com o kit Aquatest®. A partir de cada amostra de água, alíquotas de 1 mL foram inoculadas em meio batata-dextrose-ágar, totalizando 10 placas de Petri para cada local de coleta. Após incubação por 10 dias a 22 ºC, as colônias fúngicas foram quantificadas, purificadas e identificadas. Os parâmetros abióticos da água não foram limitantes para a presença de geofungos, sendo influenciados pelo tratamento de flotação. Nos dois locais o número de coliformes totais e fecais foi predominantemente superior a 8 NMP dL-1 durante o período estudado. Vinte e sete táxons de fungos foram obtidos, distribuídos em 136 ocorrências. de acordo com o índice de similaridade de Sörensen, a micota dos dois locais coletados foram consideravelmente diferentes, apesar da semelhança entre o número de táxons e ocorrências. Os resultados indicam que o tratamento da água do Córrego do Sapateiro pelo sistema de flotação possivelmente causa modificações na composição taxonômica e na quantidade de UFC de fungos, ao contrário do que ocorreu com os coliformes totais e fecais, cujos resultados apresentaram-se menos conclusivos.

Nematofauna fitopatogênica de sementes comerciais de forrageiras tropicais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação do método de Iwatsu et al., (1981) para isolamento de leveduras negras do solo, degradadoras de hidrocarbonetos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Diversidade de geofungos em águas do Parque Municipal do Ibirapuera na cidade de São Paulo, SP, Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uso de reator tipo camada delgada para desinfecção de águas de abastecimento contendo Escherichia coli, Staphylococcus aureus e Saccharomyces cerevisiae

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Uso de floculador hidráulico de manta de lodo acoplado a flotador por ar dissolvido no tratamento de água de abastecimento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Recuperação de níquel e outros metais a partir de diferentes fontes (rejeitos minerais de processo industrial e pentlandita '(Ni,Fe)IND. 9' 'S IND. 8' ) mediante lixiviação ácida e bacteriana

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Texturas e propriedades reológicas dos minérios de ferro do quadrilátero ferrífero (MG) e sua utilização em beneficiamento

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Separação do calcário e do folhelho pirobetuminoso da formação irati para utilização como corretivo e como aditivo na indústria cerâmica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo comparativo de algumas provas funcionais do fluido ruminal e de metabólitos sangüíneos de bovinos e bubalinos

No fluido ruminal de búfalos e de bovinos da Região Amazônica, alimentados com capim-elefante (Pennisetum purpureum) var. Cameron, foram determinados os seguintes parâmetros: cor, odor, viscosidade, sedimentação, flotação, pH, redução do azul de metileno, fermentação da glicose, acidez total, número total de protozoários, teor de cloretos, redução de nitrito e grupo de bactérias predominantes. No soro sangüíneo também foram avaliados os teores de cloretos, proteínas totais e uréia. A comparação desses dados não resultou em diferenças significativas entre as duas espécies, com exceção do teor de cloretos e do número e distribuição dos protozoários. Nos búfalos, os teores de cloretos foram mais baixos e o número de protozoários foi maior do que o observado em bovinos; adicionalmente nos búfalos predominaram os protozoários pequenos, enquanto em bovinos preponderaram os protozoários grandes.

Micro-fungos de interesse para o setor de petróleo, gás e biocombustíveis

Oil is a hydrocarbon mixture of various sizes, including saturated and aromatic compounds. Natural gas is a mixture of gaseous hydrocarbons and its main component is methane. In our society, the great demand for these fuels requires fast extraction, transportation and refining, increasing the number of accidents that compromise the environment. Oil is a finite resource and it is necessary to reduce the problems related to the question concerning environmental pollution which has encouraged the search for alternative fuel sources in our country. So today we have two major biofuels: ethanol and biodiesel. Concurrently, many studies have been done directed toward the isolation of microorganisms capable of degrading petrochemical industrial wastes, most of them using as a source of isolation soil and water collected in a contaminated environment. Isolation from alternative substrates has emerged as a new strategy that has provided satisfactory results. In this work, we present the leaf-cutter ants of the Attini tribe as a source for the isolation of micro-fungi with the potential for hydrocarbon degradation. These insects have a social way of life and a highly specialized system of intra and interspecific communication, which is based on the recognition of individuals through volatile chemical compounds, the majority hydrocarbons, stored in their exoskeleton. The micro-environment exoskeleton of Attini ants (genus Atta) used in this work proved to be a rich source of microbial biodiversity, as other studies have found. The flotation isolation technique applied here allowed the achievement of 214 micro-fungi, 118 representatives of the dematiaceous fungi group and 96 hyaline filamentous fungi. They were submitted to toluene degradation tests and at least one strain of each genus presented good results, namely Teratosphaeria, Exophiala, Cladosporium, Penicillium, Aspergillus... (Complete abstract click electronic access below)

Determinação de metais em água produzida de petróleo

In order to enable the reuse of the large surplus volume of petroleum produced water for irrigation of crops inedible, the quality evaluation of this water is very important. This work aimed to evaluate the effectiveness of the diffusive gradient in thin films technique (DGT) for the determination of labile Cu (II), Mn (II) and Zn (II) in petroleum produced water destined to reuse in agriculture. Samples were collected at the exit of the wastewater treatment plant (WWTP) (after separation oil/water and flotation) of a Petrobrás onshore production region. Basically, the laboratory experiments with DGT devices involved the evaluation of the behavior of the main variables of the technique for determination of analytes in the samples (diffusion coefficients, immersion time, fractionation of organic and inorganic species, and performance of diffusion gels with different porosities, among others). Also, experiments were conducted based on the solid phase extraction (SPE) protocol with Chelex- 100 resin using previously established protocols to support the study. During the project the possibility of in situ immersions in water treatment plants was evaluated. The DGT technique presented satisfactory results for determination of Mn in produced water, and can be used for in situ determinations. However, the results obtained for Cu and Zn show the need of additional studies