Production of alcoholic beverage from ginger: study of fermentation process and final product quality

Introduction: In Brazil part of the production of ginger is of inadequate quality for export. The production of spirit from felt-over rhizomes is an alternative of great interest to producers of these rhizomes. Aim: Aiming to increase the value of felt-over rhizomes, this work aimed to study the use of ginger as a raw material for alcoholic beverage production. It was evaluated the effect of fermentation conditions on the components of fermented alcoholic, as well as, the quality of alcoholic distilled beverage of ginger. Methods: Dehydrated ginger passed by enzymatic hydrolysis-saccharification processes. The hydrolysate obtained was analyzed for sugar profile in HPLC. The alcoholic fermentation process followed the central composite rotational design for three factors: fermentation temperature (23 to 37ºC), time of fermentation (17 to 33 h) and concentration of inoculum (0.22 to 3.00%). The fermented alcoholic obtained was analyzed in HPLC for the contents of ethanol, methanol, glycerol and residual sugars. The distillated alcoholic beverage of ginger was analyzed for ethanol, methanol, acetaldehyde, ethyl acetate and higher alcohols in the gas chromatography (GC). In addition, copper content and acidity were analyzed Results: Sugar profile of the ginger hydrolysate revealed the presence of 77.8% of glucose. Data analysis of fermentation process showed influence of temperature on ethanol and methanol content of the fermented alcoholic of ginger. Time of fermentation had effect on glycerol content. All parameters of process had influence on residual sugars contents. The HPLC analysis has shown presence of methanol, ethyl acetate, aldehyde, acids, higher alcohols and esters in distilled alcoholic beverage of ginger. Conclusion: Fermented alcoholic of ginger with higher levels of ethanol can be obtained under the conditions of 1.5% w/w of inoculum, 30°C of temperature and 24 hours of fermentation time. In this condition of fermentation process the beverage of ginger had good quality.

Three Shades of Embeddedness, State Capitalism as the Informal Economy, Emic Notions of the Anti-Market, and Counterfeit Garments in the Mauritian Export Processing Zone

Purpose This paper furthers the analysis of patterns regulating capitalist accumulation based on a historical anthropology of economic activities revolving around and within the Mauritian Export Processing Zone (EPZ). Design/methodology/approach This paper uses fieldwork in Mauritius to interrogate and critique two important concepts in contemporary social theory – “embeddedness” and “the informal economy.” These are viewed in the wider frame of social anthropology’s engagement with (neoliberal) capitalism. Findings A process-oriented revision of Polanyi’s work on embeddedness and the “double movement” is proposed to help us situate EPZs within ongoing power struggles found throughout the history of capitalism. This helps us to challenge the notion of economic informality as supplied by Hart and others. Social implications Scholars and policymakers have tended to see economic informality as a force from below, able to disrupt the legal-rational nature of capitalism as practiced from on high. Similarly, there is a view that a precapitalist embeddedness, a “human economy,” has many good things to offer. However, this paper shows that the practices of the state and multinational capitalism, in EPZs and elsewhere, exactly match the practices that are envisioned as the cure to the pitfalls of capitalism. Value of the paper Setting aside the formal-informal distinction in favor of a process-oriented analysis of embeddedness allows us better to understand the shifting struggles among the state, capital, and labor.

FDI and Export Participation of Local Firms in Africa: The Case of the Kenyan Garment Industry

FDI in the garment sector has been the single case of large-scale manufacturing investment in African low-income countries since the 1990s. While FDI has triggered the development of local industries in many developing countries, it has not yet been realized in Africa. This paper describes the spillover process in the Kenyan garment industry and investigates the background of local firms' behavior through firm interviews and simulation of expected profits in export market. It shows that credit constraint, rather than absorptive capacity, is a primary source of inactive participation in export opportunity. Only firms which afford additional production facilities without sacrificing stable domestic supply may be motivated to start exporting. However, in comparison with successful Asian exporters, those firms were not as motivated as Asian firms due to the large gap in expected profits.

Effect of import time on export patterns

This study examines how the importing process time affects export patterns at an establishment level. We first theoretically discuss the effects of import time on not only exports but also export shipment frequency and exports per shipment. Then, we derive some propositions regarding those effects. Next, by employing highly detailed customs data for Thailand from 2007 to 2011, we empirically investigate those propositions. In this study, the time to import is measured at an establishment level using the difference between the dates on which import shipments arrived in ports and then were released from the container yard. Our main finding is that a longer time reduces total exports, particularly through decreasing export frequency. Significantly negative effects on exports per shipment appear in some specific cases. A longer time to import also reduces total imports, particularly through decreasing import frequency.

A cytosolic activity distinct from Crm1 mediates nuclear export of protein kinase inhibitor in permeabilized cells

The leucine-rich nuclear export signal (NES) is used by a variety of proteins to facilitate their delivery from the nucleus to the cytoplasm. One of the best-studied examples, protein kinase inhibitor (PKI), binds to the catalytic subunit of protein kinase A in the nucleus and mediates its rapid export to the cytoplasm. We developed a permeabilized cell assay that reconstitutes nuclear export mediated by PKI, and we used it to characterize the cytosolic factors required for this process. The two-step assay involves an import phase and an export phase, and quantitation is achieved by digital fluorescence microscopy. During the import phase, a fluorescent derivative of streptavidin is imported into the nuclei of digitonin-permeabilized HeLa cells. During the export phase, biotinylated PKI diffuses into the nucleus, binds to fluorescent streptavidin, and mediates export of the complex to the cytoplasm. Nuclear export of the PKI complex is cytosol dependent and can be stimulated by addition of the purified NES receptor, Crm1. HeLa cell cytosol treated with N-ethylmaleimide (NEM) or phenyl-Sepharose to inactivate or deplete Crm1, respectively, is still fully active in the PKI export assay. Significantly, the export activity can be depleted from cytosol by preadsorption with a protein conjugate that contains a functional NES. These data indicate that cytosol contains an export activity that is distinct from Crm1 and is likely to correspond to an NES receptor.

The Nucleoporin Nup153 Plays a Critical Role in Multiple Types of Nuclear Export

The fundamental process of nucleocytoplasmic transport takes place through the nuclear pore. Peripheral pore structures are presumably poised to interact with transport receptors and their cargo as these receptor complexes first encounter the pore. One such peripheral structure likely to play an important role in nuclear export is the basket structure located on the nuclear side of the pore. At present, Nup153 is the only nucleoporin known to localize to the surface of this basket, suggesting that Nup153 is potentially one of the first pore components an RNA or protein encounters during export. In this study, anti-Nup153 antibodies were used to probe the role of Nup153 in nuclear export in Xenopus oocytes. We found that Nup153 antibodies block three major classes of RNA export, that of snRNA, mRNA, and 5S rRNA. Nup153 antibodies also block the NES protein export pathway, specifically the export of the HIV Rev protein, as well as Rev-dependent RNA export. Not all export was blocked; Nup153 antibodies did not impede the export of tRNA or the recycling of importin β to the cytoplasm. The specific antibodies used here also did not affect nuclear import, whether mediated by importin α/β or by transportin. Overall, the results indicate that Nup153 is crucial to multiple classes of RNA and protein export, being involved at a vital juncture point in their export pathways. This juncture point appears to be one that is bypassed by tRNA during its export. We asked whether a physical interaction between RNA and Nup153 could be observed, using homoribopolymers as sequence-independent probes for interaction. Nup153, unlike four other nucleoporins including Nup98, associated strongly with poly(G) and significantly with poly(U). Thus, Nup153 is unique among the nucleoporins tested in its ability to interact with RNA and must do so either directly or indirectly through an adaptor protein. These results suggest a unique mechanistic role for Nup153 in the export of multiple cargos.

Pure Business, Law Enforcement or Sheer Politics? The EU’s WTO Complaints against Chinese Export Restrictions on Raw Materials. EU Diplomacy Paper 06/2013

In light of the growing international competition among states and globally operating companies for limited natural resources, export restrictions on raw materials have become a popular means for governments to strive for various goals, including industrial development, natural resource conservation and environmental protection. For instance, China as a major supplier of many raw materials has been using its powerful position to both economic and political ends. The European Union (EU), alongside economic heavyweights such as the US, Japan and Mexico, launched two high-profile cases against such export restrictions by China at the WTO in 2009 and 2012. Against this background, this paper analyses the EU’s motivations in the initiation of trade disputes on export restrictions at WTO, particularly focusing on the two cases with China. It argues that the EU's WTO complaints against export restrictions on raw materials are to a large extent motivated by its economic and systemic interests rather than political interests. The EU is more likely to launch a WTO complaint, the stronger the potential and actual impact on its economy, the more ambiguous the WTO rules and the stronger the internal or external lobbying by member states or companies. This argumentation is based on the analysis of pertinent factors such as the economic impact, the ambiguity of WTO law on export restrictions and the pressure by individual member states on the EU as well as the role of joint complaints at the WTO and political considerations influencing the EU’s decision-making process.

Stronger Together: The Cross-Cultural Coalition to Stop a Fossil Fuel Export Terminal in the Salish Sea

Thesis (Master's)--University of Washington, 2016-06

Export processing zones and growth triangle development: The case of the BIMP-EAGA, Southeast Asia

Exorts processing zones (EPZs) and growth triangles have been two common Asian initiatives to increase wealth and regional competitiveness in the world economy. Since they are seldom analysed jointly, this paper investigates their mutuality in the development process. Taking the problematic case of the Brunei-Indonesia-Malaysia-Philippines East ASEAN Growth Area (BIMP-EAGA) triangle, we explore the role of EPZs in enhancing regional collaboration, competitiveness, and domestic linkages. Despite the triangle's weak economic complementarities, its processing zones are found capable of advancing development by furthering opportunities in regionalisation/localisation of production. Latterly, trade and investment liberalisation within ASEAN raises broad questions about the rationale of EPZs and growth triangles. Zone-triangle nexuses will require rethinking as, under different regulatory conditions, the zones compete more directly across ASEAN and also with global rivals. Copyright © 2005 John Wiley & Sons, Ltd.

Pricing-to-market for UK export sector

This thesis investigates the pricing-to-market (PTM) behaviour of the UK export sector. Unlike previous studies, this study econometrically tests for seasonal unit roots in the export prices prior to estimating PTM behaviour. Prior studies have seasonally adjusted the data automatically. This study’s results show that monthly export prices contain very little seasonal unit roots implying that there is a loss of information in the data generating process of the series when estimating PTM using seasonally-adjusted data. Prior studies have also ignored the econometric properties of the data despite the existence of ARCH effects in such data. The standard approach has been to estimate PTM models using Ordinary Least Square (OLS). For this reason, both EGARCH and GJR-EGARCH (hereafter GJR) estimation methods are used to estimate both a standard and an Error Correction model (ECM) of PTM. The results indicate that PTM behaviour varies across UK sectors. The variables used in the PTM models are co-integrated and an ECM is a valid representation of pricing behaviour. The study also finds that the price adjustment is slower when the analysis is performed on real prices, i.e., data that are adjusted for inflation. There is strong evidence of auto-regressive condition heteroscedasticity (ARCH) effects – meaning that the PTM parameter estimates of prior studies have been ineffectively estimated. Surprisingly, there is very little evidence of asymmetry. This suggests that exporters appear to PTM at a relatively constant rate. This finding might also explain the failure of prior studies to find evidence of asymmetric exposure in foreign exchange (FX) rates. This study also provides a cross sectional analysis to explain the implications of the observed PTM of producers’ marginal cost, market share and product differentiation. The cross-sectional regressions are estimated using OLS, Generalised Method of Moment (GMM) and Logit estimations. Overall, the results suggest that market share affects PTM positively.Exporters with smaller market share are more likely to operate PTM. Alternatively, product differentiation is negatively associated with PTM. So industries with highly differentiated products are less likely to adjust their prices. However, marginal costs seem not to be significantly associated with PTM. Exporters perform PTM to limit the FX rate effect pass-through to their foreign customers, but they also avoided exploiting PTM to the full, since to do so can substantially reduce their profits.

Export memory: a preliminary investigation of its quality, its use, and its link to export performance

Exporting is one of the main ways in which organizations internationalize. With the more turbulent, heterogeneous, sophisticated and less familiar export environment, the organizational learning ability of the exporting organization may become its only source of sustainable competitive advantage. However, achieving a competitive level of learning is not easy. Companies must be able to find ways to improve their learning capability by enhancing the different aspects of the learning process. One of these is export memory. Building from an export information processing framework this research work particularly focuses on the quality of export memory, its determinants, its subsequent use in decision-making, and its ultimate relationship with export performance. Within export memory use, four export memory use dimensions have been discovered: instrumental, conceptual, legitimizing and manipulating. Results from the qualitative study based on the data from a mail survey with 354 responses reveal that the development of export memory quality is positively related with quality of export information acquisition, the quality of export information interpretation, export coordination, and integration of the information into the organizational system. Several company and environmental factors have also been examined in terms of their relationship with export memory use. The two factors found to be significantly related to the extent of export memory use are acquisition of export information quality and export memory quality. The results reveal that export memory quality is positively related to the extent of export memory use which in turn was found to be positively related to export performance. Furthermore, results of the study show that there is only one aspect of export memory use that significantly affects export performance – the extent of export memory use. This finding could mean that there is no particular type of export memory use favored since the choice of the type of use is situation specific. Additional results reveal that environmental turbulence and export memory overload have moderating effects on the relationship between export memory use and export performance.

The innovation value chain and export performance:a study of Taiwanese manufacturing industries

This thesis involves the secondary data of 1806 innovative manufacturing firms derived from the database of 2nd Taiwanese Innovation Survey. Three topics are researched. The first topic investigates the innovation value chain (IVC) in Taiwanese manufacturing firms. Previous IVC studies are all done in developed countries such as UK, Ireland, Northern Ireland and Switzerland, and it leaves the gap of those non-developed countries. The result shows the overall knowledge sourcing pattern of Taiwanese manufacturing firms presenting a complementary relationship which is consistent to the previous IVC studies. The main innovation input is still derived from internal R&D which suggests more utilisation of external knowledge may boost innovation outcome. Product innovation does enhance firm growth while process innovation reduces a firm’s productivity. The second topic uses the lens of IVC to investigate the difference of the innovation process from knowledge linkages to value added between high-tech and low- tech sectors. The findings indicate (1) there are significant differences in the IVC between high- and low-tech sectors, however these are defined; (2) how you define ‘sector’ matters i.e. the nature of the high-tech and low-tech differences varies depending on whether the technology definition is carried out at the industry or firm level; and (3) the high uncertainty of innovation cause the difficulty to predict firm performance especially for those firms with high intensity of innovation. The third topic investigates the innovation-exporting relationship and explores the determinants of export performance. Product innovation enhances export performance once a firm enters international markets while process innovation affects negatively on a firm’s likelihood of being an exporter. Furthermore, IP protection is found to affect directly export performance positively.

Understanding and improving the manufacturing and changeover process in Saudi Arabian business - a multiple case study approach

The importance of the changeover process in the manufacturing industry is becoming widely recognised. Changeover is a complete process of changing between the manufacture of one product to manufacture of an alternative product until specified production and quality rates are reached. The initiatives to improve changeover exist in industry, as better changeover process typically contribute to improved quality performance. A high-quality and reliable changeover process can be achieved through implementation of continuous or radical improvements. This research examines the changeover process of Saudi Arabian manufacturing firms because Saudi Arabia’s government is focused on the expansion of GDP and increasing the number of export manufacturing firms. Furthermore, it is encouraging foreign manufacturing firms to invest within Saudi Arabia. These initiatives, therefore, require that Saudi manufacturing businesses develop the changeover practice in order to compete in the market and achieve the government’s objectives. Therefore, the aim of this research is to discover the current status of changeover process implementation in Saudi Arabian manufacturing businesses. To achieve this aim, the main objective of this research is to develop a conceptual model to understand and examine the effectiveness of the changeover process within Saudi Arabian manufacturing firms, facilitating identification of those activities that affect the reliability and high-quality of the process. In order to provide a comprehensive understanding of this area, this research first explores the concept of quality management and its relationship to firm performance and the performance of manufacturing changeover. An extensive body of literature was reviewed on the subject of lean manufacturing and changeover practice. A research conceptual model was identified based on this review, and focus was on providing high-quality and reliable manufacturing changeover processes during set-up in a dynamic environment. Exploratory research was conducted in sample Saudi manufacturing firms to understand the features of the changeover process within the manufacturing sector, and as a basis for modifying the proposed conceptual model. Qualitative research was employed in the study with semi-structured interviews, direct observations and documentation in order to understand the real situation such as actual daily practice and current status of changeover process in the field. The research instrument, the Changeover Effectiveness Assessment Tool (CEAT) was developed to evaluate changeover practices. A pilot study was conducted by examining the CEAT, proposed for the main research. Consequently, the conceptual model was modified and CEAT was improved in response to the pilot study findings. Case studies have been conducted within eight Saudi manufacturing businesses. These case studies assessed the implementation of manufacturing changeover practice in the lighting and medical products sectors. These two sectors were selected based on their operation strategy which was batch production as well as the fact that they fulfilled the research sampling strategy. The outcomes of the research improved the conceptual model, ultimately to facilitate the firms’ adoption and rapid implementation of a high-quality and reliability changeover during the set-up process. The main finding of this research is that Quality’s factors were considering the lowest levels comparing to the other factors which are People, Process and Infrastructure. This research contributes to enable Saudi businesses to implement the changeover process by adopting the conceptual model. In addition, the guidelines for facilitating implementation were provided in this thesis. Therefore, this research provides insight to enable the Saudi manufacturing industry to be more responsive to rapidly changing customer demands.

Sustainable rural development through alternative economic networks: Redefining relations in the commodity chain for export vegetables in western Guatemala

The current research considers the capacity of a local organic food system for producer and consumer empowerment and sustainable development outcomes in western Guatemala. Many have argued that the forging of local agricultural networks linking farmers, consumers, and supporting institutions is an effective tool for challenging the negative economic, environmental, and sociopolitical impacts associated with industrial models of global food production. But does this work in the context of agrarian development in the developing world? Despite the fact that there is extensive literature concerning local food system formation in the global north, there remains a paucity of research covering how the principles of local food systems are being integrated into agricultural development projects in developing countries. My work critically examines claims to agricultural sustainability and actor empowerment in a local organic food system built around non-traditional agricultural crops in western Guatemala. Employing a mixed methods research design involving twenty months of participant observation, in-depth interviewing, surveying, and a self-administered questionnaire, the project evaluates the sustainability of this NGO-led development initiative and local food movement along several dimensions. Focusing on the unique economic and social networks of actors and institutions at each stage of the commodity chain, this research shows how the growth of an alternative food system continues to be shaped by context specific processes, politics, and structures of conventional food systems. Further, it shows how the specifics of context also produce new relationships of cooperation and power in the development process. Results indicate that structures surrounding agrarian development in the Guatemalan context give rise to a hybrid form of development that at the same time contests and reinforces conventional models of food production and consumption. Therefore, participation entails a host of compromises and tradeoffs that result in mixed successes and setbacks, as actors attempt to refashion conventional commodity chains through local food system formation.^