Energy expenditure after 2- to 3-hour elective surgical operations

Energy expenditure was measured by indirect calorimetry in 17 adult patients (8 women and 9 men) before surgery, 4 hours immediately after surgery , and 24 hours late after surgery in patients undergoing elective surgery of small-to-medium scope. MATERIAL AND METHODS: The total duration of surgery ranged from 2 to 3 hours. Repeated measures were performed on the same patient, so that each patient was considered to be his/her own control. All patients received a 5% dextrose solution (2000 mL/day) throughout the postoperative period. RESULTS: Men showed a reduction in CO2 production during the immediately after surgery period (257±42 mL/min) compared to before surgery (306±48 mL/min) and late after surgery (301±45 mL/min); this reduction was not observed in women. Energy expenditure was also lower in men during immediately after surgery (6.6 kJ/min). None of the other measurements, including substrate oxidation, showed significant differences. CONCLUSION: Therefore, elective surgery itself cannot be considered an important trauma that would result in increased energy expenditure. According to this study, it is not necessary to prescribe an energy supply exceeding basal expenditure during the immediate after-surgery period. The present results suggest that the energy supply prescribed during the postoperative period after elective surgery of small-to-medium scope should not exceed 5-7 kJ/min, so the patient does not receive a carbohydrate overload from energy supplementation.

Fuel switching

The present Master dissertation is a project whose main objective is to identify value creation opportunities through fuel switching in the Portuguese industry, services, agriculture and fishing sectors. Fuel switching opportunities are characterized by type of fuel transition, type of technology transition, economy subsectors prone to have fuel switching and value created through fuel shift. Results suggest tomato concentrate, dairy, beer manufacturing and sugar refining subsectors is where prevalence of fuel oil steam boilers is high, for such cases conversion to natural gas steam boilers should result in operations having a ratio of NPV over CAPEX larger than ten and a payback period just under one year. Results further suggest food, beverages, textile, chemicals and wood subsectors currently operate between ten and twenty cogeneration Diesel engines that can be either modified to operate with natural gas or replaced by new natural gas cogeneration systems. Financial modeling indicates that both options have great value creation potential. The current analysis aims to be used by natural gas suppliers and energy project promoters to identify new potential deals as well as by heavy energy consumers to mitigate their energy related costs.

Associations between energetic expenditure, physical activity and body composition: exploratory study with industrial workers

This study, which involved a target population comprised by 292 workers of different industrial areas (metalmechanics, foundry, chemical, wood, food), aimed to verify the association between energy expenditure-EE, physical activity level-PAL and body composition (Body Mass Index-BMI, Waist-Hip Ratio-WHR and Waist To Height Ratio, WTHR) of participants. The work was completed with the description of the variables relating to the gender of the individuals (male and female) and the activities carried out in the two sectors of industrial work (administrative sector and productive sector). In this research, the statistical technique of principal components analysis (PCA) and the hierarchical analysis of clusters (HCA) were used. Sociodemographic and anthropometric data were collected as well as the level of physical activity and energy expenditure were assessed. The vast majority of individuals who spend greater energy expenditure and has more intense physical activity were male. Most of these workers are in the production sector. We can confirm that that both, gender and labor activity, are factors that have influence on the EE and the PAL.

Implementation and comparison of different switching techniques for shunt active power filters

This paper presents a comparison between three switching techniques that can be used in three-phase four-wire Shunt Active Power Filters (SAPFs). The implemented switching techniques are: Periodic-Sampling (PS), Triangular Carrier Pulse-Width Modulation (TC-PWM) and Space Vector PWM (SVPWM). The comparison between them is made in terms of the compensated currents THD%, implementation complexity, necessary CPU time and SAPF efficiency. To perform this comparison are presented and analyzed several experimental results, obtained with a 20 kVA Shunt Active Power Filter prototype, specially developed for this purpose. The control system of the developed SAPF is based in the p-q Theory with a grid synchronization algorithm p-PLL.

Surface plasmon resonance-coupled photoluminescence and resistive switching behavior of pulsed laser-deposited Ag:SiC nanocermet thin films

In this study, Ag:SiC nanocermets were prepared via rapid thermal annealing (RTA) of pulsed laser-deposited SiC/Ag/SiC trilayers grown on Si substrate. Atomic force microscope images show that silver nanoparticles (Ag NPs) are formed after RTA, and the size of NPs increases with increasing Ag deposition time (t Ag). Sharp dip observed in the reflectance spectra confirmed the existence of Ag surface plasmons (SPs). The infrared transmission spectra showed an intense and broad absorption band around 780–800 cm−1 that can be assigned to Si-C stretching vibration mode. Influence of t Ag on the spectral characteristics of SP-enhanced photoluminescence (PL) and electrical properties of silicon carbide (SiC) films has been investigated. The maximum PL enhancement by 5.5 times for Ag:SiC nanocermets is achieved when t Ag ≈ 50 s. This enhancement is due to the strong resonant coupling between SiC and the SP oscillations of the Ag NPs. Presence of Ag NPs in SiC also induces a forming-free resistive switching with switching ratio of 2 × 10−2. The analysis of I–V curves demonstrates that the trap-controlled space-charge-limited conduction with filamentary model is the governing mechanism for the resistive switching in nanocerment thin films.

Effect of annealing temperature on photoluminescence and resistive switching characteristics of ZnO/Al2O3 multilayer nanostructures

This work demonstrates the role of defects generated during rapid thermal annealing of pulsed laser deposited ZnO/Al2O3 multilayer nanostructures in presence of vacuum at different temperatures (Ta) (500–900 C) on their electrical conductance and optical characteristics. Photoluminescence (PL) emissions show the stronger green emission at Ta 600 C and violet–blue emission at TaP800 C, and are attributed to oxygen vacancies and zinc related defects (zinc vacancies and interstitials) respectively. Current–voltage (I–V) characteristics of nanostructures with rich oxygen vacancies and zinc related defects display the electroforming free resistive switching (RS) characteristics. Nanostructures with rich oxygen vacancies exhibit conventional and stable RS behavior with high and low resistance states (HRS/LRS) ratio 104 during the retention test. Besides, the dominant conduction mechanism of HRS and LRS is explained by trap-controlled-space-charge limited conduction mechanism, where the oxygen vacancies act as traps. On the other hand, nanostructures with rich zinc related defects show a diode-like RS behavior. The rectifying ratio is found to be sensitive on the zinc interstitials concentration. It is assumed that the rectifying behavior is due to the electrically formed interface layer ZnAl2O4 at the Zn defects rich ZnO crystals – Al2O3 x interface and the switching behavior is attributed to the electron trapping/de-trapping process at zinc vacancies.

Light-controlled resistive switching in laser-assisted annealed Ba0.8Sr0.2TiO3 thin films

In this work, Ba0.8Sr0.2TiO3 (BST)/ITO structures were grown on glass substrate and laser assisted annealing (LAA) was performed to promote the crystallization of BST. Atomic force microscopy and X-ray diffraction studies confirm the crack free and polycrystalline perovskite phase of BST. White light controlled resistive switching (RS) effect in Au/BST/ITO device is investigated. The device displays the electroforming-free bipolar RS characteristics and are explained by the modulationof the width and height of barrier at the BST/ITO interface via ferroelectric polarization. Moreover, the RS effect is signifi- cantly improved under white light illumination compared to that in the dark. The enhanced RS and photovoltaic effects are explained by considering depolarization field and charge distribution at the interface. The devices exhibit stable retention characteristics with low currents (mA), which make them attractive for non volatile memory devices.

Enhanced resistive switching and multilevel behavior in bilayered HfAlO/HfAlOx structures for non-volatile memory applications

In this work, hafnium aluminum oxide (HfAlO) thin films were deposited by ion beam sputtering deposition technique on Si substrate. The presence of oxygen vacancies in the HfAlOx layer deposited in oxygen deficient environment is evidenced from the photoluminescence spectra. Furthermore, HfAlO(oxygen rich)/HfAlOx(oxygen poor) bilayer structures exhibit multilevel resistive switching (RS), and the switching ratio becomes more prominent with increasing the HfAlO layer thickness. The bilayer structure with HfAlO/HfAlOx thickness of 30/40 nm displays the enhanced multilevel resistive switching characteristics, where the high resistance state/ intermediate resistance state (IRS) and IRS/low resistance state resistance ratios are 102 and 5 105 , respectively. The switching mechanisms in the bilayer structures were investigated by the temperature dependence of the three resistance states. This study revealed that the multilevel RS is attributed to the coupling of ionic conduction and the metallic conduction, being the first associated to the formation and rupture of conductive filaments related to oxygen vacancies and the second with the formation of a metallic filament. Moreover, the bilayer structures exhibit good endurance and stability in time.

Modeling usage of medical care services: the medical expenditure panel survey data, 1996-2000

We explore the determinants of usage of six different types of health care services, using the Medical Expenditure Panel Survey data, years 1996-2000. We apply a number of models for univariate count data, including semiparametric, semi-nonparametric and finite mixture models. We find that the complexity of the model that is required to fit the data well depends upon the way in which the data is pooled across sexes and over time, and upon the characteristics of the usage measure. Pooling across time and sexes is almost always favored, but when more heterogeneous data is pooled it is often the case that a more complex statistical model is required.

New measurements of energy expenditure and physical activity in chronic kidney disease.

The accurate estimation of total daily energy expenditure (TEE) in chronic kidney patients is essential to allow the provision of nutritional requirements; however, it remains a challenge to collect actual physical activity and resting energy expenditure in maintenance dialysis patients. The direct measurement of TEE by direct calorimetry or doubly labeled water cannot be used easily so that, in clinical practice, TEE is usually estimated from resting energy expenditure and physical activity. Prediction equations may also be used to estimate resting energy expenditure; however, their use has been poorly documented in dialysis patients. Recently, a new system called SenseWear Armband (BodyMedia, Pittsburgh, PA) was developed to assess TEE, but so far no data have been published in chronic kidney disease patients. The aim of this review is to describe new measurements of energy expenditure and physical activity in chronic kidney disease patients.

Le code-switching comme ressource stratégique pour la gestion de l'interaction multilingue : coordination et leadership dans un groupe de travail

In this article, we analyze a multilingual interaction in a students' working group and hypothesize a correlation between management of languages in interaction and leadership. We consider Codeswitching as one of the most relevant observables in multilingual interaction and attempt to analyze how it is used by speakers. After a brief presentation of three theoretical and analytical conceptions of Code-switching in interaction (Auer, Mondada & Myers Scotton), we define Code-switching as an interactional, strategical, multilingual resource exploited by speakers to achieve various interactionaland non interactional goals. We then show in two CA-like analysis how multilingual strategical resources occur in the interactional practices of the analyzed working group, and how they are exploited by speakers in order to organize interaction, work, tasks, and to construct one's leadership.We also consider the metadiscourses of the students about their own practices and multilingualism in general, in order to confront them to their actual multilingual practices. We draw the hypothesis that discrepancies observed between metadiscourses and practices can be explained through the development of (meta)discourses showing a unilingual conception in describing multilingual practices.

The Expenditure Impacts of Individual Higher Education Institutions (HEIs) and their Students on the Scottish Economy under Devolution: Homogeneity or Heterogeneity?

Comparing each of the twenty Higher Education Institutions (HEIs) in Scotland as separate sectors in an Input-Output table suggests their expenditure patterns are homogenous and that the apparent heterogeneity of their impacts is primarily driven by scale. However, a disaggregation of their income by source reveals a disparity in their dependence upon funding from the devolved Scottish Government and their ability to draw in income/funding from external sources. Acknowledging the binding budget constraint of the Scottish Government and deriving balanced expenditure multipliers reveals large differences in the net-expenditure impact of HEIs upon the Scottish economy, with the source of variation being the origin of income. Applying a novel treatment of student expenditure impacts, identifying the amount of exogenous spending per student, modifies the heterogeneity of the overall expenditure impacts. On balance this suggests that the impacts of impending budget cut-backs will be quite different by institution depending on their sensitivity to public funding. However, predicting the outcome of budget cutbacks at the margin is problematic as we do not know whether public and external incomes are complements or substitutions (and indeed this may vary between individual HEIs).

A Foundation System and a State System - Private-School Implications on Welfare and Education Expenditure

This paper examines the effects of two different education - financing systems: a foundation system and a state system on the level and distribution of resources devoted to education in the presence of private schools. We use political economy approach where households differ in their level of income, and the central tax rate used to nance education is determined by a majority vote. Our analysis focuses on implications of allowing for a private-school option. To evaluate the importance of private schools we develop a computational model and calibrate it using USA data. The results reveal that the private school option is very important quantitatively in terms of welfare, total resources spent on education and equity.