Biomass production and chemical composition of essential oil of Piper callosum as affected by spacing in Manaus, Amazonas State, Brazil

The family Piperaceae contains nearly 2000 species, most of them distributed in two genera, Piper and Peperomia. In Brazil circa 170 Piper species are found, mainly in tropical areas Their use ranges from flavoring and culinary to raw material for pharmaceutical and cosmetic industry. One of these species, Piper callosum, is used in folk medicine in the Amazon area. The objective of this study was to evaluate the production of biomass (aerial parts) as well as yield and composition of the essential oil from the leaves, according to different spacing between cultivated plants at Embrapa Western Amazon, in Manaus, State of Amazonas, Brazil. The experimental design was randomized blocks, with four treatments and seven replicates with six plants. Biomass production was inversely proportional to the spatial arrangements, with the greatest biomass production (1034.93 kg/ha) in the shortest spacing (E1), although no statistical difference was verified between E3 and E4. The same response was observed for the production of essential oil. The chemical composition of the oil was not affected by spacing, and major compounds found were safrole (59.1%), beta-pinene (8.3%), alpha-pinene (6.5%), methyl eugenol (6.3%) and 1,8-cineole (4.1).

Uso de Dois Espaçamentos Entre Gotejadores na Mesma Linha Lateral e Seus Efeitos Sobre a Formação do Bulbo Molhado no Solo e Parâmetros Físicos de Rabanete

The use of irrigation systems that consume lower water and energy in agriculture is important to supply the growing global demand for food. In this way, it's important to develop techniques that will increase the uniformity of water application on drip irrigation systems. The aim of the work was to compare the provision of lateral lines in drip irrigation, through the formation of wet bulbs in soil and physical parameters of radish, composed of single spacing between drippers in relation to lateral lines composed of two segments, each one composed by different spacing between emitters. Two distributions of evaluation were carried out: 1) conventional drip lateral lines with 20 cm emitter spacing were compared to proposed drip lines, with 24 emitter spacing in the initial section and 20 cm emitter spacing in the final section; 2) conventional drip lateral lines with 30 cm emitter spacing were compared to proposed drip lines, with 36 emitter spacing in the initial section and 30 cm emitter spacing in the final section. The experiment was carried out in a greenhouse of the Sao Manuel Experimental Farm, located at Sao Manuel, SP. The experimental design was entirely randomized, with six treatments and four replications. Results showed no difference among treatments for the most of the evaluated variables. So it is possible to conclude that the use of different spacing between emitters in the same lateral line can be used to increase the line length.

Productivity characteristics of endive as a function of spacing

Endive (Cichorium intybus) is one of the vegetables least studied in Brazil with respect to the behavior of the most commercialized cultivars, but it is known that the number of plants per area is one of the factors that most influences the productivity of various crops. Thus, the objective of this work was to evaluate the behavior of endive using four spacings between rows and five spacings between plants, in the region of Jaboticabal-SP. The experiment was conducted in the field in the period of August 12, 2008 to November 6, 2008, in the experimental area of the Sector of Vegetable Crops and Aromatic-Medicinal Plants, Department of Crop Sciences, School of Agricultural and Veterinary Sciences - UNESP-FCAV. The experimental design utilized was a randomized block design with a 4 × 5 factorial scheme, i.e., four spacings between rows (0.15, 0.20, 0.25 and 0.30 m) and five spacings between plants (0.10, 0.15, 0.20, 0.25 and 0.30 m), with three repetitions. The endive cultivar studied was 'Pão-de-Acucar', obtained from the company Tecnoseed. Seedlings were established utilizing the sowing system in 200-cell Styrofoam trays containing the substrate Plantmax Vegetables® HA. The seedlings were transplanted at 37 days after planting. After harvesting, the following characteristics were determined: height (cm), diameter of the plant in rows (cm), diameter of the plant in between rows (cm), number of leaves, fresh weight (g) and total estimated productivity (t/ha). There were no interactions between the factors studied. Based on the data, we conclude that spacings of 0.15 m between rows and of 0.15 m between plants produce plants of higher quality and with greater productivity.

Performance of cultivars of crisp mini-lettuce with respect to ground cover and spacing, in three planting times

The planting of lettuce in greenhouses, as well as covering beds with a polyethylene sheet, is a viable technology, promoting improvements in microclimatic conditions of the environment. In view of the little information on mini-lettuce, the aim of this work was to evaluate the performance of three cultivars of crisp minilettuce ('Green Frizzly', 'Red Frizzly no. 1' and 'Red Frizzly no. 2') with and without ground cover, under different spacings (20 × 15 cm and 20 × 20 cm), in three planting times (1: November 16, 2004; 2: December 17, 2004; and 3: January 20, 2005). The study was conducted in a greenhouse at UNESP-FCAV, Jaboticabal-SP. The experiments were carried out using a randomized block design, following a 3 × 2 × 2 factorial scheme with 12 treatments and three repetitions. The characteristics evaluated were plant height (cm), head diameter (cm), fresh weight (g) and number of leaves per plant. Planting time 3 was shown to be favorable for all the characteristics analyzed. 'Red Frizzly no. 2' was found to be the most suited to planting time 1, and for planting times 2 and 3, this cultivar did not differ from 'Red Frizzly no. 1'. The factor ground cover was not found to affect the characteristics evaluated, and therefore, cultivation without ground cover is recommended. The spacing 20 × 15 cm was shown to be favorable, resulting in cultivation with the highest populations, thereby increasing productivity. Based on the results obtained and for the conditions in which the experiment was conducted, it can be concluded that: planting time 3 (January 20, 2005) was the most favorable; the cultivars 'Red Frizzly no. 2' and 'Red Frizzly no. 1' are adapted to all the planting times; and cultivation without ground cover using a spacing of 20 × 15 cm was the most suitable.

Dimensionamento da linha lateral utilizando dois espaçamentos entre gotejadores

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Irrigação deficitária em videira de vinho cv. Syrah durante o período chuvoso no semiárido

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Uso de dois espaçamentos entre gotejadores na mesma linha lateral e seus efeitos sobre a formação do bulbo molhado, produtividade e qualidade de rabanete (raphanus sativus L.)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo da uniformidade de emissão de água utilizando diferentes espaçamentos entre gotejadores na linha lateral

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Desempenho do abacaxizeiro cultivar Smooth Cayenne submetido a duas frequências e quatro lâminas de irrigação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da espessura da parede no desempenho hidráulico de mangueiras gotejadoras

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Optimizing row spacing and plant population arrangement for a new short-height castor genotype in fall-winter

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of spacing in the upper lateral incisor area on the perception of smile esthetics among orthodontists and laypersons

Background: The aim of this study was to determine the perception of smile esthetics among orthodontists and laypeople with respect to the presence of diastemas in the upper lateral incisor in the mesial, distal, and both surfaces using an oblique smile analysis. Methods: Two standardized oblique photos of pleasant smiles from two white women were selected. Images were digitally altered to create diastemas in the lateral incisor, in 0.5-mm increments, in the mesial, distal, or both surfaces. Final images were randomly assembled in a photo album, which was given to 120 judgesd60 orthodontists and 60 laypersons. Each rater was asked to evaluate the attractiveness of the images on a visual analog scale. The data collected were submitted to statistical analysis by the means of one-way ANOVA with the Tukey post hoc test and the unpaired Student’s t test. Results: The most attractive smile was the one without spacing, and the presence of diastemas was considered unattractive by both groups of raters, following a pattern: the greater and the more mesially located, the more unattractive was the smile. Conclusions: The results of this study suggest that diastemas in the upper lateral incisor area were considered unattractive, following a pattern: the greater and the more mesially located, the more unattractive was the smile.

Caracterização técnica e desempenho hidráulico de quatro gotejadores autocompensantes utilizados no Brasil

This study aimed to characterize and evaluate the performance of four models self-compensating drippers commonly used in drip irrigation systems in Brazil. To perform the study it was taking a sample of 25 emitters of each model. Evaluating their tubes (b) coefficient of manufacturing variation (c) wall thickness, (d) characteristic equation of the dripper, (e) internal diameter of the pipe, (f) spacing between emitters, (g) resistance water pressure at ambient temperature and to 40°C and (h) the tensile strength of the pipe with tension of 160 N and 180 N. The analysis showed variation coefficient of less than 0.045 for all manufacturing drippers (0.07 is maximum according to ABNT NBR ISO 9261). The exponents x of the equation pressure versus discharge ranged from 0.0082 to 0.0691 classifying them as self-compensating. From the results obtained it is clear that the tested products which are used in Brazil and used by irrigators had a satisfactory hydraulic performance in accordance with the standard.

Cotton yield and fiber quality affected by row spacing and shading at different growth stages

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Disponibilidade de n e k no solo e sua absorção pela videira de vinho fertirrigada no semiárido

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA