Silica-based Nano-coating on Zirconia Surfaces Using Reactive Magnetron Sputtering: Effect on Chemical Adhesion of Resin Cements

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo de rochas alcalinas intrusivas na região de Três Fontes - MG

Geological researches conducted in the past few years detected, through deep drill hole data, the presence of alkaline rocks in the region of Três Fontes-MG, where the Barbacena Group rocks, the Morro do Ferro Greenstone Belt rocks and Araxá/Canastra groups‟ rocks are exposed. This paper aimed the petrographic and chemical characterization of these alkaline rock types, which have not yet been described in the literature. Based on petrographic descriptions and geochemical and Scanning Electron Microscopy analysis, it was possible to characterize the rock in question as lamprophyre, rich in carbonates, phlogopite, pyroxene, olivine, titaniferous opaque minerals and apatite concentrations that reach 7%. This occurrence corresponds to an alkaline intrusion, which caused brecciation of host rocks, possibly indicating that the material is explosive, however, in the study area there was no evidence of volcanic activity on the surface

Estudo das características fluidodinâmicas do bagaço de cana de açúcar para aplicações da gaseificação no setor sucroalcooleiro

In this work is studied the fluid dynamic characteristics of sugarcane bagasse for gasification applications and use of syngas in the sugarcane sector. This is an experimental work, which is initially performed the particle size separation of sugarcane bagasse particles, using appropriate equipment. Through the experiment is possible to determine the average diameter of particles pomace typical sugarcane mill. The equipment used for the grading sieve separation assembly consists of several dimensions, arranged vertically and which shows adequate for good separation from the pulp. Later, it makes immediate analysis for the determination of moisture, ash, volatile materials and fixed carbon. The study also determines the gross calorific value and allows analysis of densities of particles of sugar cane bagasse. Also studied the bagasse morphology using electron microscopes, where it was possible to visualize the geometry of the particles of bagasse. The use of Electronic Scanning Microscopy (SEM) provided better understand the morphology and particle size measured by using photography methods. Two methods for determining the sphericity of the particles were also used. The experiments carried out using appropriate standards and specific equations, allowing compare the present results with the values found by several researchers. Subsequently, fluid dynamic simulations were performed for the determination of porosity and minimum fluidization velocity theoretical. It follows that the sphericity and porosity of the bagasse particles influence the minimum fluidization velocity of biomass

Processamento de fotomicrografias por meio da transformada wavelet starlet

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dielectric behaviour of CaCu3Ti4O12-epoxy composites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A novel spermatozoan ultrastructure in the shrimp Hippolyte obliquimanus Dana, 1852 (Decapoda: Caridea: Hippolytidae)

The aim of this study was to describe and illustrate the morphology of the spermatozoon of the Western Atlantic shrimp, Hippolyte obliquimanus. Individuals were sampled from Itagua Beach (Ubatuba, southern Brazil). The male reproductive system was dissected and morphological analysis was undertaken using a stereomicroscope, a light microscope, and transmission electron and scanning electron microscopes. When viewed from the nuclear or acrosomal poles, each spermatozoon has many translucent radiating arms (about 20) from a denser cell body, while laterally the cell body and arms resemble a "cnidarian medusa", with all the arms projecting away from the bell-like cell body. This sperm morphology is distinct from the "thumbtack"-shaped spermatozoa observed in the majority of carideans but has similarities to the spermatozoa of Rhynchocinetes spp. The morphology of sperm of several species of the genus Hippolyte resembles the spermatozoon of H. obliquimanus with the presence of posterior nuclear arms, but it is necessary to study other Hippolyte species to place these arms in the context of the genus.

Fatigue Reliability of 3 Single-Unit Implant-Abutment Designs

Objectives: Because the mechanical behavior of the implant-abutment system is critical for the longevity of implant-supported reconstructions, this study evaluated the fatigue reliability of different implant-abutment systems used as single-unit crowns and their failure modes. Methods and Materials: Sixty-three Ti-6Al-4V implants were divided in 3 groups: Replace Select (RS); IC-IMP Osseotite; and Unitite were restored with their respective abutments. Anatomically correct central incisor metal crowns were cemented and subjected to separate single load to failure tests and step-stress accelerated life testing (n = 18). A master Weibull curve and reliability for a mission of 50,000 cycles at 200 N were calculated. Polarized-light and scanning electron microscopes were used for failure analyses. Results: The load at failure mean values during step-stress accelerated life testing were 348.14 N for RS, 324.07 N for Osseotite, and 321.29 N for the Unitite systems. No differences in reliability levels were detected between systems, and only the RS system mechanical failures were shown to be accelerated by damage accumulation. Failure modes differed between systems. Conclusions: The 3 evaluated systems did not present significantly different reliability; however, failure modes were different. (Implant Dent 2012;21:67-71)

Cretaceous calcareous nannofossils of ODP Leg 103 holes

Ocean Drilling Program Leg 103 recovered Lower Cretaceous sediments from the Galicia margin off the coast of Iberia. The high diversity and abundance of assemblages makes this excellent material for the study of Early Cretaceous calcareous nannofossils. With the exception of a hiatus between the upper Hauterivian and lower Barremian, nannofossil distributions form a continuous composite section from the lower Valanginian to lower Cenomanian sediments recovered at the four sites. The sedimentation history of this rifted continental margin is complex, and careful examination of the nannofossil content and lithology is necessary in order to obtain optimum biostratigraphic resolution. The Lower Cretaceous sequence consists of a lower Valanginian calpionellid marlstone overlain by terrigenous sandstone turbidites deposited in the Valanginian and Hauterivian during initial rifting of this part of the margin. Interbedded calcareous marl and claystone microturbidites overlie the sandstone turbidites. Rifting processes culminated in the late Aptian-early Albian, resulting in the deposition of a calcareous, clastic turbidite sequence. The subsequent deposition of dark carbonaceous claystones (black shales) represents the beginning of seafloor spreading, as the margin continued to subside to depths near or below the CCD. The diversity, abundance, and preservation of nannofossils within these varied lithologies differ, and an attempt to distinguish between near shore and open-marine assemblages is made. Genera used for this purpose include Nannoconus, Micrantholithus, Pickelhaube, and Lithraphidites. In this study, six new species and one new subspecies are described and documented. Ranges of other species are extended, and an attempt is made to clarify existing, yet poorly understood, taxonomic concepts. A technique in which a single specimen is viewed with both light and scanning electron microscopes was used extensively to aid in this task. In addition, further subdivisions of the Sissingh (1977) zonation are suggested in order to increase biostratigraphic resolution.

Rethinking cell structure.

Cell structure, emerging from behind the veil of conventional electron microscopy, appears far more complex than formerly realized. The standard plastic-embedded, ultrathin section can image only what is on the section surface and masks the elaborate networks of the cytoplasm and nucleus. Embedment-free electron microscopy gives clear, high-contrast micrographs of cell structure when combined with removal of obscuring material such as soluble proteins. The resinless ultrathin section is the technique of choice; it is simple and inexpensive, and it uses ordinary electron microscopes. The resulting pictures reveal a world of complex cell structure and function. These images necessarily change our conception of the cytoskeleton, nuclear matrix, mitosis, and the relation of membranes to cytostructure.

Anatomia ecológica do lenho de espécies arbustivas e arbóreas que ocorrem naturalmente em bosques com drástico gradiente de precipitação ao Noroeste da Patagônia, Argentina

A utilização de gradientes ambientais no estudo de comunidades vegetais possibilita a eleição de sítios onde há a predominância de um fator abiótico que determina o sucesso ou o fracasso de espécies ao longo de sua extensão. Entre as inúmeras ferramentas utilizadas no estudo de gradientes climáticos, se destaca a anatomia do lenho, pois, é um ramo da ciência que permite analisar, além dos aspectos espaciais, os aspectos temporais dos sítios por meio dos anéis de crescimento. Além disso, a ampla distribuição das plantas lenhosas ao longo do globo possibilita análises em praticamente todos os tipos de biomas e ecossistemas terrestres. Dentro desse contexto estão os bosques andino-patagônicos de Araucaria araucana (Pehuén) ao norte de sua distribuição na Argentina. Esses bosques ocupam territórios caracterizados por um acentuado gradiente de precipitação, que vai de cerca de 3000 a 100 milímetros anuais, entre a cordilheira do Andes e a estepe patagônica, que os define como bosques mésicos e xéricos, com diferenças ecológicas que condicionam a formação vegetal, dinâmica, estrutura, relações com o clima e vulnerabilidade em cenários de mudanças ambientais. O objetivo do projeto foi descrever e analisar comparativamente a estrutura anatômica do lenho de 33 espécies arbóreas e arbustivas ocorrentes ao longo de um gradiente de precipitação, entre a encosta da cordilheira dos Andes e a estepe Patagônica, para verificar possíveis alterações anatômicas que permitam a determinação de tendências e elucidem os limites de distribuição das espécies. Foram coletadas amostras não destrutivas de lenho durante três expedições para a Patagônia entre 2012 e 2014, seguidas de procedimentos laboratoriais de confeccção de lâminas histológicas, preparo de amostras para análises dendrocronológicas, captura de imagens com câmeras acopladas a microscópios óptico e eletrônico de varredura, mensurações, descrições e análises comparativas com o auxílio de softwares. Foram identificados caracteres anatômicos exclusivos de sítios secos e úmidos que permitiram a caracterização, posicionamento ao longo do gradiente de precipitação e grupamento de espécies xerófitas e mesófitas; A ultra-estrutura das pontoações de traqueídeos de Araucaria araucana apresentou diferenças marcantes na frequência e porosidade de suas membranas, sendo maior e menos porosas em sítios xéricos, e menor e mais porosas nos mésicos; a chave dicotômica microscópica permitiu a identificação das 32 espécies arbustivas, as espécies Chuquiraga oppositifolia e Nothofagus antarctica apresentaram potencial dendrocronológico, e foram identificadas tendências anatômicas latitudinais influenciadas pelo clima nos extremos da América do Sul. A anatomia do lenho se mostrou uma ferramenta confiável no estudo de um gradiente de precipitação na Patagônia argentina, e os resultados apontam para riscos de embolismos e morte induzida por falha no sistema hidráulico de Araucaria araucana ao longo de todo o gradiente, em função do atual cenário climático, e suas projeções em médio e longo prazos.

Does Müller cell differentiation occur prior to the emergence of synapses in embryonic turtle retina?

Müller cells are the main glial cells in the retina, and are related to plexiform layer activity. Recent studies have demonstrated that Müller cells are involved in the synaptic conservation, plasticity, development and metabolism of glutamate. During turtle retinal development, layers, cells and synapses appear at different times. The aim of this research is to study the emergence of Müller cells during embryonic development and their relationship with the synaptogenesis. The authors used retinas from Trachemys scripta elegans embryos at stages S14, 18, 20, 23, and 26. Some retinas were processed with immunocytochemistry in order to detect the presence of glutamine synthetase in Müller cells, which was used as a marker of these cells. Other retinas from the same stages were processed for ultrastructural studies. Samples were observed in confocal and transmission electron microscopes, respectively. The present results show that glutamine synthetase expression in Müller cells occurs at S18, before the emergence of the retinal layers and the early synapses.

Interim method for determining asbestos in water /

"January 1980."

Proceedings.

At head of title: ANL-7275. Instruments (TID-4500) AEC research and development report.

Grain refinement efficiency and mechanism of aluminium carbide in Mg-Al alloys

Detailed microscopic examination using optical and electron microscopes suggests that Al4C3, often observed in the central regions of magnesium grains on polished sections, is a potent substrate for primary Mg. Calculations of the crystallographic relationships between magnesium and Al4C3 further support the experimental observations. (c) 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.