Unsteady free convection flow over an infinite vertical porous plate due to the combined effects of thermal and mass diffusion, magnetic field and Hall currents

The unsteady free convection flow over an infinite vertical porous plate, which moves with time-dependent velocity in an ambient fluid, has been studied. The effects of the magnetic field and Hall current are included in the analysis. The buoyancy forces arise due to both the thermal and mass diffusion. The partial differential equations governing the flow have been solved numerically using both the implicit finite difference scheme and the difference-differential method. For the steady case, analytical solutions have also been obtained. The effect of time variation on the skin friction, heat transfer and mass transfer is very significant. Suction increases the skin friction coefficient in the primary flow, and also the Nusselt and Sherwood numbers, but the skin friction coefficient in the secondary flow is reduced. The effect of injection is opposite to that of suction. The buoyancy force, injection and the Hall parameter induce an overshoot in the velocity profiles in the primary flow which changes the velocity gradient from a negative to a positive value, but the magnetic field and suction reduce this velocity overshoot.

A computational study of heat transfer, soot production and transport in an acetylene-air laminar diffusion flame in the field of a line vortex

The present work involves a computational study of soot formation and transport in case of a laminar acetylene diffusion flame perturbed by a co nvecting line vortex. The topology of the soot contours (as in an earlier experimental work [4]) have been investigated. More soot was produced when vortex was introduced from the air si de in comparison to a fuel side vortex. Also the soot topography was more diffused in case of the air side vortex. The computational model was found to be in good agreement with the ex perimental work [4]. The computational simulation enabled a study of the various parameters affecting soot transport. Temperatures were found to be higher in case of air side vortex as compared to a fuel side vortex. In case of the fuel side vortex, abundance of fuel in the vort ex core resulted in stoichiometrically rich combustion in the vortex core, and more discrete so ot topography. Overall soot production too was low. In case of the air side vortex abundan ce of air in the core resulted in higher temperatures and more soot yield. Statistical techniques like probability density fun ction, correlation coefficient and conditional probability function were introduced to explain the transient dependence of soot yield and transport on various parameters like temperature, a cetylene concentration.

A computational study of flame dynamics on soot production and transport for an acetylene-air laminar diffusion flame in the field of a convecting line vortex

The present work involves a computational study of soot formation and transport in case of a laminar acetylene diffusion flame perturbed by a convecting line vortex. The topology of the soot contours (as in an earlier experimental work [4]) have been investigated. More soot was produced when vortex was introduced from the air side in comparison to a fuel side vortex. Also the soot topography was more diffused in case of the air side vortex. The computational model was found to be in good agreement with the experimental work [4]. The computational simulation enabled a study of the various parameters affecting soot transport. Temperatures were found to be higher in case of air side vortex as compared to a fuel side vortex. In case of the fuel side vortex, abundance of fuel in the vort ex core resulted in stoichiometrically rich combustion in the vortex core, and more discrete soot topography. Overall soot production too was low. In case of the air side vortex abundance of air in the core resulted in higher temperatures and more soot yield. Statistical techniques like probability density function, correlation coefficient and conditional probability function were introduced to explain the transient dependence of soot yield and transport on various parameters like temperature, a cetylene concentration.

Generalized eigenvalue decomposition of the field autocorrelation in correlation diffusion of photons in turbid media

We propose a novel numerical method based on a generalized eigenvalue decomposition for solving the diffusion equation governing the correlation diffusion of photons in turbid media. Medical imaging modalities such as diffuse correlation tomography and ultrasound-modulated optical tomography have the (elliptic) diffusion equation parameterized by a time variable as the forward model. Hitherto, for the computation of the correlation function, the diffusion equation is solved repeatedly over the time parameter. We show that the use of a certain time-independent generalized eigenfunction basis results in the decoupling of the spatial and time dependence of the correlation function, thus allowing greater computational efficiency in arriving at the forward solution. Besides presenting the mathematical analysis of the generalized eigenvalue problem on the basis of spectral theory, we put forth the numerical results that compare the proposed numerical method with the standard technique for solving the diffusion equation.

Branched crystal morphology of linear polyethylene crystallized in a two-dimensional diffusion-controlled growth field

The branched crystal morphology of linear polyethylene formed at various temperatures from thin films has been studied by atomic-force microscopy (AFM), transmission electron microscopy (TEM), electron diffraction (ED) pattern and polymer decoration technique. Two types of branched patterns, i.e. dendrite and seaweed patterns, have been visualized. The fractal dimension d(f) = 1.65 of both dendrite and some of seaweed patterns was obtained by using the box-counting method, although most of the seaweed patterns are compact. Selected-area ED patterns indicate that the fold stems tilt about 34.5degrees around the b-axis and polymer decoration patterns show that the chain folding direction and regularity in two (200). regions are quite different from each other. Because of chain tilting, branched crystals show three striking features: 1) the lamella-like branches show two (200) regions with different thickness; 2) the crystals usually bend towards the thin region; 3) the thick region grows faster by developing branches, thus branches usually occur outside the thick region. The branched patterns show a characteristic width w, which gives a linear relationship with the crystallization temperature on a semilogarithmic plot.

Nonlinear Field Line Random Walk and Generalized Compound Diffusion of Charged Particles

A new nonlinear theory for the perpendicular transport of charged particles is presented. This approach is based on an improved nonlinear treatment of field line random walk in combination with a generalized compound diffusion model. The generalized compound diffusion model is much more systematic and reliable, in comparison to previous theories. Furthermore, the new theory shows remarkably good agreement with test-particle simulations and heliospheric observations.

Lead in rice: Analysis of baseline lead levels in market and field collected rice grains

In a large scale survey of rice grains from markets (13 countries) and fields (6 countries), a total of 1578 rice grain samples were analysed for lead. From the market collected samples, only 0.6% of the samples exceeded the Chinese and EU limit of 0.2 μg g− 1 lead in rice (when excluding samples collected from known contaminated/mine impacted regions). When evaluating the rice grain samples against the Food and Drug Administration's (FDA) provisional total tolerable intake (PTTI) values for children and pregnant women, it was found that only people consuming large quantities of rice were at risk of exceeding the PTTI from rice alone. Furthermore, 6 field experiments were conducted to evaluate the proportion of the variation in lead concentration in rice grains due to genetics. A total of 4 of the 6 field experiments had significant differences between genotypes, but when the genotypes common across all six field sites were assessed, only 4% of the variation was explained by genotype, with 9.5% and 11% of the variation explained by the environment and genotype by environment interaction respectively. Further work is needed to identify the sources of lead contamination in rice, with detailed information obtained on the locations and environments where the rice is sampled, so that specific risk assessments can be performed.

Action collective patronale : les mécanismes de diffusion entre les niveaux sectoriel et local

Cette recherche s'intéresse à l'acteur patronal organisé, encore peu étudié en Amérique du Nord. Pourtant, cet acteur est fortement organisé au Québec et il exerce une influence reconnue sur les politiques publiques et les relations industrielles. Cette recherche vise à mieux comprendre la logique d’action des employeurs et les lieux où ils exercent leur influence. Plus important encore, la recherche s’interroge sur les mécanismes de diffusion utilisés par les associations patronales pour transmettre à leurs membres des orientations et des lignes directrices à adopter. Tout comme pour l’acteur syndical qui doit développer sa capacité représentative (Dufour, Hege, Levesque et Murray, 2009), nous croyons qu’il en est de même pour l’acteur patronal. Bref, cette étude cherche à comprendre comment les associations patronales vont s'assurer que leurs membres adoptent des pratiques en lien avec les positions défendues dans les institutions du marché du travail et dans la sphère des politiques publiques. Notre question de recherche est la suivante : Quels sont les mécanismes développés par les associations patronales pour diffuser leurs orientations en matière de politiques publiques et de relations du travail en vue d’influencer les pratiques locales de gestion de leurs membres? Au plan théorique, cette étude mobilise les idées développées par les approches néo-institutionnalistes pour mieux expliquer comment les acteurs vont utiliser les institutions en place pour façonner les règles dans leurs intérêts, ce qui suppose d’abord une capacité de représentation et une cohérence dans les actions entre les niveaux où se situent l’acteur. On cherche à comprendre comment les associations peuvent coordonner les actions patronales en réaction aux changements qui s’opèrent dans l’environnement institutionnel. Les associations patronales sont des entrepreneurs institutionnels (Crouch, 2005) qui sont à la recherche active d’opportunités et de leviers de pouvoir à utiliser pour maximiser leurs intérêts de leurs membres et par la même occasion, réduire les incertitudes en provenance de l’environnement (Campbell, 2004; Streeck et Thelen, 2005; Crouch, 2005). Toujours au niveau théorique, cette étude se base sur les idées avancées par la sociologie des logiques d’action. Cette approche théorique nous permet de rendre compte des niveaux sectoriel et local où s’enracinent les comportements des employeurs. Au niveau sectoriel, il existe une pluralité d’instances qui contribuent à façonner les logiques d’actions des associations patronales. La sociologie des logiques d’actions nous permet d’envisager l’association patronale comme un groupe qui dispose d’une vie qui lui est propre avec une relative autonomie de fonctionnement. La capacité d’influence de l’association serait tributaire des mécanismes de coordination de l’action utilisés pour susciter l’accord au sein du groupe. Les mécanismes de coordination de l’action devraient permettre une connexion régulière et stable entre l’association et ses membres. Cette recherche s’intéresse aux associations patronales qui ont recours à un ensemble de moyens pour diffuser les orientations privilégiées aux entreprises membres. Au plan empirique, cette recherche propose de répondre aux trois objectifs suivants : (1) mieux comprendre les formes d’organisation patronales dans les mines au Québec; (2) mieux saisir la structure et la logique d’action des associations patronales sur les politiques publiques, les relations de travail et le marché du travail et finalement (3) mieux comprendre les mécanismes développés par les associations patronales pour diffuser leurs orientations en vue d’influencer les pratiques locales de gestion de leurs membres. Pour atteindre nos objectifs de recherche, nous avons utilisé une méthodologie qualitative de recherche soit une étude de cas du secteur des mines au Québec. Cette dernière a été conduite en trois étapes : la préparation, la collecte des données et l’interprétation (Merriam, 1998). Les données de cette étude ont été recueillies à l’hiver 2012, par le biais d’entretiens semi-directifs auprès de gestionnaires d’entreprises minières et de dirigeants d’associations minières. Une analyse qualitative du contenu de ces entrevues a été effectuée en lien avec la revue de littérature et nos propositions de recherche. À cette fin, nous avons utilisé la technique de l’appariement logique de Yin (1994), ce qui nous a permis de comparer nos observations à nos propositions de recherche. Au niveau des résultats, nous avons pu constater que les associations patronales du secteur des mines au Québec, endossent davantage le rôle de porte-parole de l’industrie auprès du gouvernement que celui de développeur de services aux membres. Les actions des associations patronales s’exercent à tous les niveaux décisionnels afin d’assurer la meilleure promotion possible des intérêts des employeurs. La représentation politique représente le champ d’activité le plus important qui compose la logique d’action des associations patronales de la filière minérale québécoise. Mentionnons également que la représentation des intérêts des entreprises auprès du public et des médias est également vitale à l’action collective patronale dans un souci d’acceptabilité sociale. Les associations d’employeurs vont tenter principalement d’influencer les pratiques en relations industrielles qui permettent d’assurer une meilleure image de l’industrie et qui sont jugées prioritaires en fonction du contexte institutionnel en place. La recherche nous a permis d’observer un impact favorable et significatif à la capacité de diffusion pour cinq des sept mécanismes de diffusion faisant partie de notre modèle d’analyse. Trois de ces cinq mécanismes favorisent la capacité de diffusion descendante (transposition de la logique d’action sectorielle sur les pratiques locales des membres) et les deux autres favorisent plutôt la capacité de diffusion ascendante (transposition des enjeux locaux jugés prioritaires sur la logique d’action sectorielle). Les mécanismes qui supportent au mieux la cohésion au sein de l’association sont ceux qui impliquent une relation dynamique entre les représentants et les membres et entre les membres eux-mêmes d’où la pertinence d’une diffusion descendante et ascendante des orientations. Il est à noter qu’étant donné que cette recherche consiste en une étude de cas, des limites méthodologiques liées à la généralisation des résultats sont présentes. Il n’est pas aisé d’affirmer que les résultats de cette microanalyse soient généralisables en raison des spécificités du secteur à l’étude. En contrepartie, les analyses ont servi à l’élaboration d’un modèle qui pourra être utilisé dans des études futures.

Anisotropic diffusion at the field scale in a 4-year multi-tracer diffusion and retention experiment – I: Insights from the experimental data

Abstract Claystones are considered worldwide as barrier materials for nuclear waste repositories. In the Mont Terri underground research laboratory (URL), a nearly 4-year diffusion and retention (DR) experiment has been performed in Opalinus Clay. It aimed at (1) obtaining data at larger space and time scales than in laboratory experiments and (2) under relevant in situ conditions with respect to pore water chemistry and mechanical stress, (3) quantifying the anisotropy of in situ diffusion, and (4) exploring possible effects of a borehole-disturbed zone. The experiment included two tracer injection intervals in a borehole perpendicular to bedding, through which traced artificial pore water (APW) was circulated, and a pressure monitoring interval. The APW was spiked with neutral tracers (HTO, HDO, H2O-18), anions (Br, I, SeO4), and cations (Na-22, Ba-133, Sr-85, Cs-137, Co-60, Eu-152, stable Cs, and stable Eu). Most tracers were added at the beginning, some were added at a later stage. The hydraulic pressure in the injection intervals was adjusted according to the measured value in the pressure monitoring interval to ensure transport by diffusion only. Concentration time-series in the APW within the borehole intervals were obtained, as well as 2D concentration distributions in the rock at the end of the experiment after overcoring and subsampling which resulted in �250 samples and �1300 analyses. As expected, HTO diffused the furthest into the rock, followed by the anions (Br, I, SeO4) and by the cationic sorbing tracers (Na-22, Ba-133, Cs, Cs-137, Co-60, Eu-152). The diffusion of SeO4 was slower than that of Br or I, approximately proportional to the ratio of their diffusion coefficients in water. Ba-133 diffused only into �0.1 m during the �4 a. Stable Cs, added at a higher concentration than Cs-137, diffused further into the rock than Cs-137, consistent with a non-linear sorption behavior. The rock properties (e.g., water contents) were rather homogeneous at the centimeter scale, with no evidence of a borehole-disturbed zone. In situ anisotropy ratios for diffusion, derived for the first time directly from field data, are larger for HTO and Na-22 (�5) than for anions (�3�4 for Br and I). The lower ionic strength of the pore water at this location (�0.22 M) as compared to locations of earlier experiments in the Mont Terri URL (�0.39 M) had no notable effect on the anion accessible pore fraction for Cl, Br, and I: the value of 0.55 is within the range of earlier data. Detailed transport simulations involving different codes will be presented in a companion paper.

Long-term diffusion experiment at Mont Terri: first results from field and laboratory data

The diffusion of radionuclides is an important safety aspect for nuclear waste disposal in argillaceous host rocks. A long-term diffusion experiment, termed DI-A, is being carried out at the Mont Terri Rock Laboratory in the Opalinus Clay formation. The aim of this experiment is the understanding of the migration and sorption behaviour of cationic and anionic species in consolidated clays. This study reports on the experimental layout and the first results obtained from the DI-A experiment, which include the investigation of HTO, Na-22(+), Cs+, and I- migration during a period of 1 year by analysing these tracers in the water circulating in the borehole. In addition, results obtained from through-diffusion experiments on small-sized samples with HTO, I-, and Cl-36(-) are presented. The decrease of tracer concentrations in the borehole is fastest for Cs+, followed by Na-22(+), HTO, and finally I-. The chemical composition of the artificial pore water in the borehole shows very little variation with time, thus indicating almost no chemical disturbance around the borehole. Through-diffusion experiments in the laboratory that were performed parallel to the bedding plane with two different methods yielded effective diffusion coefficients for HTO of 4-5 X 10(-11) m(2) s(-1) and significantly lower ones for anions Cl- and I- (0.7-1.6 X 10(-11) m(2) s(-1)). The results indicate the importance of anion exclusion effects arising from the negatively charged clay surfaces. Furthermore, they demonstrate the anisotropic diffusion properties of the clay formation with significantly increased diffusion rates parallel to bedding relative to the perpendicular direction. The tracer data of the in situ experiment were successfully described with 2D diffusion models using diffusion and sorption parameters obtained from the above mentioned and other laboratory studies. The modelling results indicate that HTO and I- diffused with no retardation. The retardation of Na+ and Cs+ could be described by empirical sorption expressions from previously derived batch sorption (Cs+) or diffusion (Na+) experiments. Overall, the obtained results demonstrate the feasibility of the technical concept to study the diffusion of nonsorbing and sorbing tracers in consolidated clays. (C) 2004 Elsevier B.V. All rights reserved.

Diffusion-weighted MR imaging of upper abdominal organs: field strength and intervendor variability of apparent diffusion coefficients

PURPOSE To determine the variability of apparent diffusion coefficient (ADC) values in various anatomic regions in the upper abdomen measured with magnetic resonance (MR) systems from different vendors and with different field strengths. MATERIALS AND METHODS Ten healthy men (mean age, 36.6 years ± 7.7 [standard deviation]) gave written informed consent to participate in this prospective ethics committee-approved study. Diffusion-weighted (DW) MR imaging was performed in each subject with 1.5- and 3.0-T MR systems from each of three vendors at two institutions. Two readers independently measured ADC values in seven upper abdominal regions (left and right liver lobe, gallbladder, pancreas, spleen, and renal cortex and medulla). ADC values were tested for interobserver differences, as well as for differences related to field strength and vendor, with repeated-measures analysis of variance; coefficients of variation (CVs) and variance components were calculated. RESULTS Interreader agreement was excellent (intraclass coefficient, 0.876). ADC values were (77.5-88.8) ×10(-5) mm(2)/sec in the spleen and (250.6-278.5) ×10(-5) mm(2)/sec in the gallbladder. There were no significant differences between ADC values measured at 1.5 T and those measured at 3.0 T in any anatomic region (P >.10 for all). In two of seven regions at 1.5 T (left and right liver lobes, P < .023) and in four of seven regions at 3.0 T (left liver lobe, pancreas, and renal cortex and medulla, P < .008), intervendor differences were significant. CVs ranged from 7.0% to 27.1% depending on the anatomic location. CONCLUSION Despite significant intervendor differences in ADC values of various anatomic regions of the upper abdomen, ADC values of the gallbladder, pancreas, spleen, and kidney may be comparable between MR systems from different vendors and between different field strengths.