Enhanced three-factor security protocol for consumer USB mass storage devices

The Universal Serial Bus (USB) is an extremely popular interface standard for computer peripheral connections and is widely used in consumer Mass Storage Devices (MSDs). While current consumer USB MSDs provide relatively high transmission speed and are convenient to carry, the use of USB MSDs has been prohibited in many commercial and everyday environments primarily due to security concerns. Security protocols have been previously proposed and a recent approach for the USB MSDs is to utilize multi-factor authentication. This paper proposes significant enhancements to the three-factor control protocol that now makes it secure under many types of attacks including the password guessing attack, the denial-of-service attack, and the replay attack. The proposed solution is presented with a rigorous security analysis and practical computational cost analysis to demonstrate the usefulness of this new security protocol for consumer USB MSDs.

Effect of Biomimetic Remineralization on the Dynamic Nanomechanical Properties of Dentin Hybrid Layers

The mineral and organic phases of mineralized dentin contribute co-operatively to its strength and toughness. This study tested the null hypothesis that there is no difference in nano-dynamic mechanical behavior (complex modulus-E*; loss modulus-E ''; storage modulus-E'; in GPa) of dentin hybrid layers (baseline: E*, 3.86 +/- 0.24; E '', 0.23 +/- 0.05; E', 3.85 +/- 0.24) created by an etch-and-rinse adhesive in the presence or absence of biomimetic remineralization after in vitro aging. Using scanning probe microscopy and nano-dynamic mechanical analysis, we demonstrated that biomimetic remineralization restored the nano-dynamic mechanical behavior of heavily remineralized, resin-sparse regions of dentin hybrid layers (E*, 19.73 +/- 3.85; E '', 8.75 +/- 3.97; E', 16.02 +/- 2.58) to those of the mineralized dentin base (E*, 19.20 +/- 2.42; E '', 6.57 +/- 1.96; E', 17.39 +/- 2.0) [p > 0.05]. Conversely, those resin-sparse, water-rich regions degraded in the absence of biomimetic remineralization, with significant decline [p < 0.05] in their complex and storage moduli (E*, 0.83 +/- 0.35; E '', 0.88 +/- 0.24; E', 0.62 +/- 0.32). Intrafibrillar apatite deposition preserves the integrity of resin-sparse regions of hybrid layers by restoring their nanomechanical properties to those exhibited by mineralized dentin.

Dielectric thermal analysis as a tool for quantitative-evaluation of the viscosity and the kinetics of epoxy resin cure

Dielectric thermal analysis has been proved as a valuable tool for monitoring the epoxy curing process and the related rheological properties in the fabrication of polymer-matrix composite materials. This technique also has the potential to be applied in the monitoring of magnet impregnation processes as well as in quality control. In this work we present the quantitative evaluation of the viscosity changing and the curing kinetics for a commercial Stycast epoxy resin system at different temperatures through the impedance analysis. The results showed correlation between the real component of the complex impedance and the isothermal reaction extent. Comparing the dielectric analysis result with the viscosity measured by rotational rheometer we observed a similar behavior reported for dynamic mechanic analysis. The results comparison have shown that the kinetics parameters obtained from DSC and DETA analysis showed different sensitivities related to the characteristics of curing stages. We concluded that the dielectric thermal analysis should be applied in quantitative evaluation of cure kinetics.

Transient stability indices from a hybrid approach

This paper deals with hybrid method for transient stability analysis combining time domain simulation and a direct method. Nowadays, the step-by-step simulation is the best available tool for allowing the uses of detailed models and for providing reliable results. The main limitation of this approach involves the large time of computational simulations and the absence of stability margin. On the other hand, direct methods, that demand less CPU time, did not show ample reliability and applicability yet. The best way seems to be using hybrid solutions, in which a direct method is incorporated in a time domain simulation tool. This work has studied a direct method using the transient potential and kinetic energy of the critical machine only. In this paper the critical machine is identified by a fast and efficient method, and the proposal is new for using to get stability margins from hybrid approaches. Results from systems, like 16-machine, show stability indices to dynamic security assessment. © 2001 IEEE.

Analysis of ensemble models in the medium term hydropower scheduling

The medium term hydropower scheduling (MTHS) problem involves an attempt to determine, for each time stage of the planning period, the amount of generation at each hydro plant which will maximize the expected future benefits throughout the planning period, while respecting plant operational constraints. Besides, it is important to emphasize that this decision-making has been done based mainly on inflow earliness knowledge. To perform the forecast of a determinate basin, it is possible to use some intelligent computational approaches. In this paper one considers the Dynamic Programming (DP) with the inflows given by their average values, thus turning the problem into a deterministic one which the solution can be obtained by deterministic DP (DDP). The performance of the DDP technique in the MTHS problem was assessed by simulation using the ensemble prediction models. Features and sensitivities of these models are discussed. © 2012 IEEE.

Análise dinâmica de contingências de sistemas de energia elétrica por redes neurais baseadas na teoria da ressonância adaptativa

Pós-graduação em Engenharia Elétrica - FEIS

Scanned stripping chronopotentiometry at bismuth film rotating disc electrodes: a method for quantitative dynamic metal speciation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

MATERIAL MODELING AND ANALYSIS FOR THE DEVELOPMENT OF A REALISTIC BLAST HEADFORM

Blast traumatic brain injury (BTBI) has become an important topic of study because of the increase of such incidents, especially due to the recent growth of improvised explosive devices (IEDs). This thesis discusses a project in which laboratory testing of BTBI was made possible by performing blast loading on experimental models simulating the human head. Three versions of experimental models were prepared – one having a simple geometry and the other two having geometry similar to a human head. For developing the head models, three important parts of the head were considered for material modeling and analysis – the skin, skull and brain. The materials simulating skin, skull and brain went through many testing procedures including dynamic mechanical analysis (DMA). For finding a suitable brain simulant, several materials were tested under low and high frequencies. Step response analysis, rheometry and DMA tests were performed on materials such as water based gels, oil based mixtures and silicone gels cured at different temperatures. The gelatins and silicone gels showed promising results toward their use as brain surrogate materials. Temperature degradation tests were performed on gelatins, indicating the fast degradation of gelatins at room temperature. Silicone gels were much more stable compared to the water based gels. Silicone gels were further processed using a thinner-type additive gel to bring the dynamic modulus values closer to those of human brain matter. The obtained values from DMA were compared to the values for human brain as found in literature. Then a silicone rubber brain mold was prepared to give the brain model accurate geometry. All the components were put together to make the entire head model. A steel mount was prepared to attach the head for testing at the end of the shock tube. Instrumentation was implemented in the head model to obtain effective results for understanding more about the possible mechanisms of BTBI. The final head model was named the Realistic Explosive Dummy Head or the “RED Head.” The RED Head offered potential for realistic experimental testing in blast loading conditions by virtue of its material properties and geometrical accuracy.

Investigation of the Impacts of Large-Scale Wind Power Penetration on the Angle and Voltage Stability of Power Systems

The complexity of power systems has increased in recent years due to the operation of existing transmission lines closer to their limits, using flexible AC transmission system (FACTS) devices, and also due to the increased penetration of new types of generators that have more intermittent characteristics and lower inertial response, such as wind generators. This changing nature of a power system has considerable effect on its dynamic behaviors resulting in power swings, dynamic interactions between different power system devices, and less synchronized coupling. This paper presents some analyses of this changing nature of power systems and their dynamic behaviors to identify critical issues that limit the large-scale integration of wind generators and FACTS devices. In addition, this paper addresses some general concerns toward high compensations in different grid topologies. The studies in this paper are conducted on the New England and New York power system model under both small and large disturbances. From the analyses, it can be concluded that high compensation can reduce the security limits under certain operating conditions, and the modes related to operating slip and shaft stiffness are critical as they may limit the large-scale integration of wind generation.

Static analysis of WCET in a satellite software subsystem

This paper describes the authors? experience with static analysis of both WCET and stack usage of a satellite on-board software subsystem. The work is a continuation of a previous case study that used a dynamic WCET analysis tool on an earlier version of the same software system. In particular, the AbsInt aiT tool has been evaluated by analysing both C and Ada code generated by Simulink within the UPMSat-2 project. Some aspects of the aiT tool, specifically those dealing with SPARC register windows, are compared to another static analysis tool, Bound-T. The results of the analysis are discussed, and some conclusions on the use of static WCET analysis tools on the SPARC architecture are commented in the paper.

A dynamic factor model for mid-term forecasting of wind power generation

The main objective of this paper is the development and application of multivariate time series models for forecasting aggregated wind power production in a country or region. Nowadays, in Spain, Denmark or Germany there is an increasing penetration of this kind of renewable energy, somehow to reduce energy dependence on the exterior, but always linked with the increaseand uncertainty affecting the prices of fossil fuels. The disposal of accurate predictions of wind power generation is a crucial task both for the System Operator as well as for all the agents of the Market. However, the vast majority of works rarely onsider forecasting horizons longer than 48 hours, although they are of interest for the system planning and operation. In this paper we use Dynamic Factor Analysis, adapting and modifying it conveniently, to reach our aim: the computation of accurate forecasts for the aggregated wind power production in a country for a forecasting horizon as long as possible, particularly up to 60 days (2 months). We illustrate this methodology and the results obtained for real data in the leading country in wind power production: Denmark

Security specification and enforcement in mediation system

Mediation techniques provide interoperability and support integrated query processing among heterogeneous databases. While such techniques help data sharing among different sources, they increase the risk for data security, such as violating access control rules. Successful protection of information by an effective access control mechanism is a basic requirement for interoperation among heterogeneous data sources. ^ This dissertation first identified the challenges in the mediation system in order to achieve both interoperability and security in the interconnected and collaborative computing environment, which includes: (1) context-awareness, (2) semantic heterogeneity, and (3) multiple security policy specification. Currently few existing approaches address all three security challenges in mediation system. This dissertation provides a modeling and architectural solution to the problem of mediation security that addresses the aforementioned security challenges. A context-aware flexible authorization framework was developed in the dissertation to deal with security challenges faced by mediation system. The authorization framework consists of two major tasks, specifying security policies and enforcing security policies. Firstly, the security policy specification provides a generic and extensible method to model the security policies with respect to the challenges posed by the mediation system. The security policies in this study are specified by 5-tuples followed by a series of authorization constraints, which are identified based on the relationship of the different security components in the mediation system. Two essential features of mediation systems, i. e., relationship among authorization components and interoperability among heterogeneous data sources, are the focus of this investigation. Secondly, this dissertation supports effective access control on mediation systems while providing uniform access for heterogeneous data sources. The dynamic security constraints are handled in the authorization phase instead of the authentication phase, thus the maintenance cost of security specification can be reduced compared with related solutions. ^

The Security Challenges for the 2016 Rio de Janeiro Olympic Games

Brazilians greeted the long-awaited decision of making Rio de Janeiro the host of the 2016 Olympic Games with tremendous exhilaration. Although Rio’s fantastic natural beauty certainly added to its attraction in hosting the games, its alarming rates of urban crime and violence largely associated with drug trafficking immediately triggered worldwide criticism, and put at issue its ability to guarantee the security for the games. Brazilians have been vying for a position as an emerging global economy and understand the importance of the Games for international prestige. This makes the stakes very high when hosting the Olympic Games in the wake of the 2014 Soccer World Cup, which will also be held in Brazil. This paper explores these criticisms and assesses Rio’s ability to prepare for this important event. The paper further explores the consensus that Brazilians will be more equipped to address actions taken by organized crime capable of affecting the Olympic Games than to face a terrorist attack. Brazil – and Rio – does not figure in the “terrorism map” as a region particularly linked to terrorism. Aside from uncorroborated suspicions of activities by terrorist organizations on the Tri-Border region (Argentina, Brazil, and Paraguay), Brazil does not elicit many concerns regarding terrorism.1 Yet, there is no way to guarantee that terrorist organizations will not try to make use of the 2016 Rio Olympic Games to advance their agenda. This being in mind, Rio and Brazil in general face a long road ahead to prepare, prevent, protect and respond to a possible terrorist attack during the 2016 Olympics. It is clear that prevention and preparation towards potential threats to the Games must necessarily include cooperation and exchange of best practices with other countries. 1 U.S. Department of State has confirmed that this area may have been used to transport weapons and conduct financial affairs in the past. This type of activity has been made more difficult with the fortification of border controls in more recent times.

The Use of the Military for Law Enforcement Activities in Central America

Faced with the violence, criminality and insecurity now threatening peace and democratic governance in Central America, the region’s governments have decided to use the Armed Forces to carry out actions in response to criminal actions, looking to improve their performance. Although public demand for including the Armed Forces in these functions takes place within a legally legitimate framework, it is motivated by tangible circumstances such as increased levels of violence, delinquency and crime. Despite being coupled with the perception of institutional weakness within the security and judicial system (particularly police) and the recognition of prestige, efficiency, discipline and severity in fulfilling the Armed Forces’ missions, these arguments are insufficient to legitimize the use of the military as a police force. Within this context, this paper reflects on the implications or consequences of the use of the Armed Forces in duties traditionally assigned to the police in the Central American region with the goal of contributing to the debate on this topic taking place in the Americas. To achieve this end, first we will focus on understanding the actual context in which a decision is made to involve the Armed Forces in security duties in the region. Second, we will examine the effects and implications of this decision on the Armed Forces’ relations within their respective societies. Third and finally, considering this is already a reality in the region, this paper will provide recommendations. The main findings of this research, resulting from the application of an analyticaldescriptive and historically based study, are organized in three dimensions: the political dimension, by implication referring to the relationship between the ultimate political authority and the Armed Forces; the social dimension, by implication the opinion of citizens; and other implications not only affecting the structural and cultural organization of armies and police but also the complementary operational framework within a context of comprehensive response by the State. As a main conclusion, it poses there is an environment conducive to the use of the Armed Forces in citizen’s security, in view of the impact of threats provoked by criminal structures of a military nature currently operating in Central America. However, this participation creates an inevitable social and political impact if implemented in isolation or given a political leading role and/or operational autonomy. This participation poses risks to the institutions of the Armed Forces and the police as well. Finally, this paper identifies an urgent need for the Armed Forces’ role to be more clearly defined with regard to security matters, limiting it to threats that impact States’ governability and existence. Nonetheless, Central American States should seek a COMPREHENSIVE response to current crime and violence, using all necessary institutions to confront these challenges, but with defined roles and responsibilities for each and dynamic coordination to complement their actions.

Capabilities of Police and Military Forces in Central America -- A Comparative Analysis of Guatemala, El Salvador, Honduras an d Nicaragua

A difficult transition to a new paradigm of Democratic Security and the subsequent process of military restructuring during the nineties led El Salvador, Honduras, Guatemala and Nicaragua to re-consider their old structures and functions of their armed forces and police agencies. This study compares the institutions in the four countries mentioned above to assess their current condition and response capacity in view of the contemporary security challenges in Central America. This report reveals that the original intention of limiting armies to defend and protect borders has been threatened by the increasing participation of armies in public security. While the strength of armies has been consolidated in terms of numbers, air and naval forces have failed to become strengthened or sufficiently developed to effectively combat organized crime and drug trafficking and are barely able to conduct air and sea operations. Honduras has been the only country that has maintained a proportional distribution of its armed forces. However, security has been in the hands of a Judicial Police, supervised by the Public Ministry. The Honduran Judicial Police has been limited to exercising preventive police duties, prohibited from carrying out criminal investigations. Nicaragua, meanwhile, possesses a successful police force, socially recognized for maintaining satisfactory levels of security surpassing the Guatemalan and El Salvadoran police, which have not achieved similar results despite of having set up a civilian police force separate from the military. El Salvador meanwhile, has excelled in promoting a Police Academy and career professional education, even while not having military attachés in other countries. Regarding budgetary issues, the four countries allocate almost twice the amount of funding on their security budgets in comparison to what is allocated to their defense budgets. However, spending in both areas is low when taking into account each country's GDP as well as their high crime rates. Regional security challenges must be accompanied by a professionalization of the regional armies focused on protecting and defending borders. Therefore, strong institutional frameworks to support the fight against crime and drug trafficking are required. It will require the strengthening of customs, greater control of illicit arms trafficking, investment in education initiatives, creating employment opportunities and facilitating significant improvements in the judicial system, as well as its accessibility to the average citizen.