984 resultados para Determinação de metais


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

ABSTRACT: This work proposes an analytical procedure for direct determination of calcium, magnesium, manganese and zinc in buffalo milk by flame atomic absorption spectrometry (FAAS). Samples were diluted with a solution containing 10% (v/v) of water-soluble tertiary amines (CFA-C) at pH 8. For comparison, buffalo milk samples were digested with HNO3 and H2O2. According to a paired t-test, the results obtained in the determination of Ca, Mg, Mn and Zn in digested samples and in 10% (v/v) CFA-C medium were in agreement at a 95% confidence level. The developed procedure is simple, rapid, decrease the possibility of contamination and can be applied for the routine determination of Ca, Mg, Mn and Zn in buffalo milk samples without any difficulty caused by matrix constituents, such as fat content, and particle size distribution in the milk emulsion

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pelo uso de técnicas mais baratas, como a do SDDC, é possível determinar níveis traços de arsênio em cabelo; entretanto esta técnica apresenta alguns inconvenientes como baixa estabilidade e o odor desagradável da piridina. A piridina foi substituída por trietanolamina/CHCl3 e as características analíticas do complexo foram estudadas. O complexo foi estável por 270 minutos, a faixa de aplicação da lei de Beer foi de 0,0 a 25,0 mg As, a repetibilidade foi de 0,028 mg As, o limite de detecção foi de 18,6 mg de As/L e a sensibilidade (e)? de 1,12 104 L.mol-1.cm-1. O método foi aplicado à amostras de cabelo. A lavagem das amostras foi feita com extran e água desionizada e seca em estufa (40-60ºC). 0,1000 g de amostra foi submetida à 11 métodos de digestão. O melhor método foi o que usou uma solução 1:1 de HNO3 e H2SO4 concentrados em temperatura de 100-110ºC com evaporação até fumos de SO3. O tempo de abertura é um inconveniente neste tipo de digestão.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Várias toneladas de rejeito de manganês contendo arsênio, gerado por uma empresa de mineração, foram utilizadas como aterro de ruas da cidade de Santana-AP. A possibilidade de exposição das pessoas residentes nessas localidades levou ao estudo de quantificação de arsênio total nos solos. Após a digestão, os teores de arsênio foram quantificados por espectrofotometria de absorção molecular usando um sistema automático de geração de hidretos (HG-MAS), diciclohexilamina/CHCl3 como solvente do dietilditiocarbamato de prata (SDDC) e KBH4 como redutor. O método apresentou bons resultados com sensibilidade (ε) de 1,10 104 L.mol-1.cm-1, estabilidade de 2,96% e outras vantagens em relação ao método oficial. O método foi aplicado em amostras de referência de solo com recuperação de 98,82 % (N=10). As análises de solos mostraram que do total de amostras analisadas 94,74 % apresentaram concentração de arsênio acima do valor editado pela CETESB para solo residencial (50 mg.kg-1) com valor médio de 682,96 mg.kg-1, variando de 48,08 mg.kg-1 a 1.713,00 mg.kg-1 que comprova a contaminação do solo pelo arsênio.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Trabalho trata da síntese e caracterização de quelatos inéditos de prata, paládio e platina contendo proteínas hidrolisadas da clara de ovo. A ideia consiste em preparar e utilizar quelatos metálicos contendo ligantes de origem natural, como metalofármacos. A pesquisa realizada pode ser dividida em três etapas. A primeira, referente à hidrólise e análise do hidrolisado proteico da clara de ovo. Diversos métodos e condições experimentais foram testadas a fim de se encontrar as condições de hidrólise mais adequadas (natureza da enzima, tempo, pH, temperatura, relação enzima:substrato) para a obtenção de aminoácidos livres e/ou pequenos peptídeos. A segunda parte consistiu na obtenção de compostos de coordenação de platina, prata e paládio contendo o hidrolisado proteico. Nessa etapa, diferentes rotas sintéticas e condições experimentais também foram utilizadas. Além disso, a espectroscopia vibracional no infravermelho foi utilizada nessa etapa para investigar as características estruturais (particularmente, os grupos funcionais presentes) dos compostos metálicos obtidos bem como da matéria prima utilizada (clara de ovo). Após inúmeras tentativas de síntese, três amostras promissoras, do ponto de vista da Química de Coordenação, foram obtidas, a saber, CO-Pd2, CO-Pd9 e CO-Ag3. Ensaios biológicos preliminares, que consistiu na terceira e última parte deste trabalho, foram realizados no sentido de avaliar a capacidade inibitória de crescimento das bactérias S. aureus e E. coli, através da determinação da Concentração Inibitória Mínima (CIM) dos compostos metálicos obtidos.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Because of the great metallurgical advances, the welded tubes by HF / ERW (High Frequency / Electrical Resistance Welding) have played a more active role in the oil and gas, gradually replacing tubes produced by other processes (UOE, SAW, and others) to deep water applications, in high and extremely low temperatures, highpressure conditions and in highly corrosive environments. However, studies have revealed that defects in the welded joints are in one of main causes of failures in pipelines. Associated with damage external and the stringent requirements of this sector, the welded joints become particularly critical for his toughness and the determination of this particular property is fundamental. This study aims to evaluate the toughness of the HF / ERW pipes in HSLA steel API X70 class, used in pipelines transport systems of gas and oil from data obtained with CTOD tests (Crack Tip Opening Displacement). The main objectives of this project are: mechanical and microstructural characterization of steels API X70 manufactured in Brazil; and evaluation of the toughness of weld process by HF / ERW steel API X70 national. After having the tests done, mechanical, chemical and metallurgical, we have the conclusion that those pipe are in agreement to API 5L 42ª edition for X70MO and the toughness behaves like the expected

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The objective of this work is to use the technique of diffusion by concentration gradient films (DGT) for evaluation of dissolved urano in hydro bodies. For this we chose this work as a systems investigation of water bodies in the region of Poços de Caldas, state of Minas Gerais, because, there is a large amount of mining of uranila. The technique to be used to evaluate the potential for dissolved metals analysis involves the use of passive samplers with application in in situ. This allows detection with excellent sensitivity and selectivity allowing the determination of the labile fraction of dissolved metals

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This paper proposes to assess the lability of complexes of uranium in soil using the technique of Diffusion in Thin Films by concentration gradients (DGT) in the vicinity the Osamu Utsumi mine, located in the municipality of Caldas - MG. The technique is based on the 1ª Fick Law, where metal complexes diffuse through a gel, which in turn is adsorbed on a resin. The metals adsorbed are recovered by an analytical technique and quantified by optical emission spectrometer with plasma inductively coupled (ICP-OES) or mass spectrometry with inductively coupled plasma (ICP-MS)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The DGT technique has been used to determine and better understand the dynamics and bioavailability of metals in the sea near to marine outfalls. In this work, the DGT was assessed for the determination of Cd, Pb, Cu, Zn and Ni in marine water samples from Potiguar Basin in its conventional aspect (binding agent, Chelex-100 and diffusive agent: Diffusive polyacrylamide gel (D) and restrictive (R)) and determination of Pb and Cd through its alternative aspect (binding agent: Saccharomyces cerevisiae immobilized in agarose gels and diffusive agent: 3MM Chromatography Paper). The deployment curves for long periods of immersion in the sample, showed a good linear correlation for the conventional aspect to Zn (D: R²=0.9586, R: R²=0.9444), Ni (D: R²=0.9789, R: R²=0.9286) and Cu (D: R²=0.764, R: R²=0.8143), and alternative to Pb (R²=0.9228) and Cd (R²=0.9673). The results of the organic and inorganic composition analysis in conventional aspect, showed that for every element there is no significant fraction of organic compounds in the sample. In addition, considering the alternative aspect, the comparison of obtained and expected masses suggests that some of the Pb is not labile and that the main retention mechanism of Pb for S. Cerevisiae occurs through ion exchange

Relevância:

30.00% 30.00%

Publicador:

Resumo:

It is known that there is a wide variety of bioavailable trace metals in aquatic systems, and its determination is fundamental to predict impacts to organisms in these environments. However, the determination of the total concentration of chemicals in aquatic systems, despite its importance, does not provide necessary information for decision making or even may lead to misinterpretation of the procedures and potential risks to the system in question. This study aimed to use the technique of diffusion in thin films by concentration gradients (DGT) to evaluate the anion exchange membrane Whatman DE 81 as binder alternative in determining Cr (VI). Experiments were carried out to determine the diffusion coefficients for the material used diffusion (agarose gel). The behaviors of the binders were analyzed before the main variables of the systems, immersion time, pH and ionic strength. Then was made the assessment of potential interferences, to finally proceed with testing using actual samples in the laboratory and in situ

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Worldwide environmental degradation is an undesirable byproduct resulting from the increasing demand for natural resources. Water sources are suffering intense contamination since they usually receive a huge amount of domestic and industrial effluents - which are mostly wasted without proper treatment - inserting a large number of pollutants in the environment, heavy metals included. Mercury holds great toxicological importance because, under some physicochemical conditions in a water environment, Hg (II) ion turns into methylated compounds stemming from this element, such as methylmercury CH3Hg, which is highly toxic for the aquatic community in which bioaccumulation occurs. Nowadays passive sampling techniques are being developed to enable the analytical procedures which are applied in environmental monitoring. Diffusive gradients in thin-films technique (DGT) has been proven an interesting tool for the determination of labile metal species due to its in situ application. The DGT technique consists of a piston-like device on which the following series of agents is disposed: a binding agent (conventionally Chelex 100 resin), a diffusive agent, usually a polyacrylamide gel, and a membrane filter. Nevertheless, the agents conventinally used for this technique don't usually show satisfactory results in mercury sampling. The main goal of this study was to evaluate the phosphate-treated cellulose membrane (Whatman P 81), an alternative material, as binding agent in the DGT to determine labile mercury fractions in aquatic systems. In this context, we conducted a study of the behavior of this material in relation with system variables, pH and ionic strength. Afterwards we performed immersions of the DGT devices in real and enriched samples and in situ aiming the determination of mercury