Biodegradability of PP/PHBV (70/30) blend films

This study aimed to investigate the biodegradation of polypropylene/ poly(hydroxybutyrate-co-hydroxyvalerate) (PP/PHBV) blend (70/30, w/w) films in soil, monitoring the evolution of CO2 using the respirometric method. The polymeric films were incubated at 28°C ± 2°C for 180 days in biometer flasks, and the sequence of biodegradation percentage was PP/PHBV (70/30) > PP, that is, 15% and 0%, respectively. Fourier transform infrared spectroscopy and X-ray diffraction measurements showed that biodegradation occurs in the blend PP/PHBV interphases. Preferentially, the microbial action occurs in the fraction of the biodegradable polymer (PHBV), and it influences the PP fraction morphology, which showed some significant changes in the monomer unit sequences and the organization of the chains. © 2013 Wiley Periodicals, Inc.

Efeitos estruturais e ópticos da incorporação de Mn em filmes nanocristalinos de 'GA IND.1-x'MN IND.XN' preparados por sputtering reativo

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Filmes finos de ZnO como óxidos condutores transparentes aplicados à células solares

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Utilização de diferentes métodos de lubri-refrigeração na retificação cilíndrica externa de mergulho de cerâmica avançada com rebolo diamantado

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Difração de policristais e difração múltipla de raios X para o estudo da influência dos íons Mn+2, Mg+2 e Cu+2 nas estruturas cristalinas da L asparagina monohidratada e do sulfato de níquel hexahidratado

Neste trabalho realizamos um estudo sobre a influência dos dopantes Mn⁺², Mg⁺² e Cu⁺² nas estruturas cristalinas de cristais de Sulfato de Níquel hexahidratado (NSH) e L Asparagina Monohidratada (LAM). A introdução de dopantes em uma rede cristalina pode alterar suas propriedades físicas ou seu hábito de crescimento. Estas alterações podem favorecer as aplicações tecnológicas destes cristas em diversas áreas como medicina, agricultura, óptica e eletrônica. Os cristais de NSH foram crescidos pelo método da evaporação lenta do solvente e dopados com íons de Mn⁺² e Mg⁺², resultando em cristais de boa qualidade. Realizamos medidas de Difração de raios X de policristais nos cristais puros e dopados e a partir dos resultados obtidos fizemos refinamentos, usando o método de Rietiveld, onde foi observado que os cristais dopados apresentavam a mesma estrutura tetragonal e grupo espacial que o cristal puro, havendo uma pequena mudança em seus parâmetros de rede e volume de suas células unitárias. Observamos que a introdução de dopantes causou alterações nos comprimentos das ligações e nos ângulos entre os átomos de níquel e oxigênio, isso pode explicar porque as temperaturas de desidratação dos cristais de NSH:Mg e NSH:Mn são maiores que a do NSH puro. Usamos a técnica de Difração Mútipla de raios X com radiação síncroton em diferentes energias na estação de trabalho XRD1, do Laboratorio Nacional de Luz Síncroton (LNLS) a fim de identificarmos possíveis mudanças nas estruturas dos cristais dopados de Sulfato de Níquel e de L Asparagina. Os diagramas Renninger mostram mudanças na intensidade, perfil e posições dos picos secundários dos cristais dopados causadas pela introdução dos dopantes. Os cristais de L Asparagina Monohidratada foram crescidos pelo método da evaporação lenta do solvente, sendo dopados com íons de Cu⁺². As medidas de difração múltipla mostram que o cristal dopado possui a mesma estrutura ortorrômbica que o cristal puro. Foram detectadas mudanças nas intensidades, assim como, nas posições e perfil de picos secundários no diagramas Renninger para o cristal dopado. Nossos resultados indicam que o mecanismo de incorporação dos íons de Cu⁺² na rede cristalina da L Asparagina Monohidratada ocorre de forma intersticial.

Espécies moleculares e supramoleculares de 'PD'(II)' com ligantes mono, bi e polidentados : caracterização estrutural e atividades biológicas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Novas espécies moleculares e supramoleculares de cobre (II) contendo aminas bidentadas: síntese, caracterização estrutural e investigação do comportamento vapocrômico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Deposição e caracterização de filmes de óxido de cobalto por sputtering reativo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ce0.97Cu0.03O2 Nanocatalysts Synthesized via Microwave-assisted Hydrothermal Method: Characterization and CO-PROX Catalytic Efficiency

In the work presented here, Ce0.97Cu0.03O2 nanoparticles were synthesized by a microwave-assisted hydrothermal method under different synthesis temperatures. The obtained nanoparticles were tested as catalysts in preferential oxidation of CO to obtain CO-free H2 (PROX reaction). The samples were characterized by X-ray diffraction, transmission electron microscopy (TEM), electron paramagnetic resonance spectroscopy (EPR) and temperature-programmed reduction (TPR). X-ray diffraction measurements detected the presence of pure cubic CeO2 for all synthesized samples. TEM images of the Ce0.97Cu0.03O2 nanoparticles revealed that samples synthesized at 80°C are composed mainly of nanospheres with an average size of 20 nm. The formation of some nanorods with an average diameter of 8 nm and 40 nm in length, and the size reduction of the nanoparticles from 20 to approximately 15 nm is observed with increasing synthesis temperature. EPR spectra indicated that copper is found well dispersed in sample synthesized at 160°C, located predominant in surface sites of ceria. For samples synthesized at 80 and 120°C, the species are less dispersed than in the other one, resulting in the formation of Cu2+−Cu2+ dimmers at the surface of ceria. TPR profiles presented two reduction peaks, one below 400°C attributed to the reduction of different copper species and a second peak around 800°C attributed to the reduction of Ce4+→ Ce3+ species located in the volume of the nanoparticles. The peak related to the reduction of copper species shifts to lower temperatures with increasing synthesis temperature, i.e., the sample synthesized at 160°C is more easily reduced than the ones synthesized at 120 and 80°C. The nanoparticles showed active as catalysts for the CO-PROX reaction. The microwave-assisted method revealed efficient for the synthesis of Ce0.97Cu0.03O2 nanoparticles with copper species selective for the CO-PROX reaction, which reaches CO conversions up to 92% for the sample synthesized at 160°C.

An easy method of preparing ozone gas sensors based on ZnO nanorods

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fingerprints of short-range and long-range structure in BaZr1-xHfxO3 solid solutions: an experimental and theoretical study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On the stability of the Higher Manganese Silicides

We investigated in this work the stability of the Higher Manganese Silicides (HMS). Several alloys in the composition range 62-66 at.% Si were prepared from their constitutive elements by arc-melting. The prepared alloys were then analysed by in situ X-ray diffraction measurements and Electron Probe Micro-Analyser (EPMA). The whole results allow us to suggest that whatever the composition is, only Mn(27)Si(47) is stable for the temperatures 500 degrees C and 800 degrees C. At higher temperatures, the studied samples undergo two phase transformations which consecutively lead to the formation of Mn(15)Si(26) and Mn(11)Si(19). Mn(4)Si(7) was never evidenced in the present work. It is shown for the first time in this work that Mn(27)Si(47) is the only HMS stable phase at room temperature. (C) 2011 Elsevier B.V. All rights reserved.

Relationship between Crystal Shape, Photoluminescence, and Local Structure in SrTiO3 Synthesized by Microwave-Assisted Hydrothermal Method

This paper describes the effect of using different titanium precursors on the synthesis and physical properties of SrTiO3 powders obtained by microwave-assisted hydrothermal method. X-ray diffraction measurements, X-ray absorption near-edge structure (XANES) spectroscopy, field emission scanning electron microscopy (FE-SEM), and high-resolution transmission electron microscopy (HRTEM) were carried out to investigate the structural and optical properties of the SrTiO3 spherical and cubelike-shaped particles. The appropriate choice of the titanium precursor allowed the control of morphological and photoluminescence (PL) properties of SrTiO3 compound. The PL emission was more intense in SrTiO3 samples composed of spherelike particles. This behavior was attributed to the existence of a lower amount of defects due to the uniformity of the spherical particles.

Kinetics of thermal decomposition of niobium hydride

High-purity niobium powders can be obtained from the well-known hydride-dehydride (HDH) process. The aim of this work was the investigation of the structural phase transition of the niobium hydride to niobium metal as function of temperature, heating rate and time. The niobium powder used in this work was obtained by high-temperature hydriding of niobium machining chips followed by conventional ball milling and sieving. X-ray diffraction measurements were carried out in vacuum using a high-temperature chamber coupled to an X-ray diffractometer. During the dehydriding process, it is possible to follow the phase transition from niobium hydride to niobium metal starting at about 380 degrees C for a heating rate of 20 degrees C/min. The heating rate was found to be an important parameter, since complete dehydriding was obtained at 490 degrees C for a heating rate of 20 degrees C/min. The higher dehydriding rate was found at 500 degrees C. Results contribute to a better understanding of the kinetics of thermal decomposition of niobium hydride to niobium metal. (C) 2011 Elsevier Ltd. All rights reserved.

Effects of the Compaction Pressure on the Magnetic Properties of a Sintered Fe-Based Alloy

The structural and magnetic properties of a Fe-based alloy before and after sintering have been analyzed. X ray diffraction measurements confirm the deformation of the magnetic particles in the compacted samples. After sintering, hysteresis energy dissipation, remanence and intrinsic coercivity differ by less than 10% as porosity changes from 15 to 7%.