Exploration de la dynamique entre les demandes, ressources au travail et la santé psychologique au travail.

Plusieurs interventions visant à améliorer la santé psychologique au travail reposent sur une conceptualisation pathogénique où celle-ci est représentée par une absence d’états psychologiques négatifs (Randall & Nielsen, 2010). Or, elle représenterait à la fois l’absence d’états négatifs de détresse psychologique au travail et la présence d’états positifs de bien-être psychologique au travail (Gilbert, Dagenais-Desmarais, & Savoie, 2011). Ceci suggère qu’afin de maximiser l’impact des interventions, il serait pertinent d’indiquer aux intervenants des leviers pouvant influencer les volets positifs et négatifs de la santé psychologique au travail. Parmi ces leviers, Gilbert (2009) a identifié les demandes et les ressources au travail. Cependant, les modèles théoriques traitant de l’impact de demandes et de ressources sur des états positifs et négatifs tendent à traiter de ces effets de manière indépendante et aucun ne formule de propositions concernant l’impact potentiel de ces leviers sur un état complet et unifié de santé psychologique au travail (e.g., Job Demand-Control(-Support) de Karasek & Theorell, 1990; Job Demands-Resources de Bakker & Demerouti, 2007). En considérant l’aspect interrelié et distinct de la facette positive et négative de la santé psychologique au travail, la présente thèse vise donc à explorer la dynamique entre les demandes, les ressources et un état complet et unifié de santé psychologique au travail. Pour ce faire, un article théorique et un article empirique sont présentés. L’article théorique intègre différentes théories afin d’apporter un éclairage sur l’incidence des demandes et ressources au travail sur un état complet et unifié de santé psychologique au travail, et d’expliquer simultanément l’influence de ces aspects du travail sur les facettes de bien-être et de détresse au travail. Il avance ainsi que, telles que définies par le modèle Job Demand-Resources (Bakker & Demerouti, 2007), les demandes tendraient a davantage représenter des menaces que des défis et auraient alors des effets néfastes sur un état complet de santé psychologique au travail et ses facettes positifs et négatifs. D’autre part, il est suggéré que lorsque les demandes sont élevées, avoir suffisamment de ressources pour se sentir capable de répondre avec succès aux demandes pourrait amener celles-ci à moins représenter des menaces et davantage représenter des défis. Comparativement à une situation où les ressources sont insuffisantes, cette première situation accroîtrait un état complet de santé psychologique au travail, de même que l’intensité de son volet positif, tandis que l’intensité de son volet négatif serait amoindrie. Enfin, il est suggéré que les ressources au travail faciliteraient la satisfaction des besoins psychologiques fondamentaux, ce qui aurait un effet bénéfique sur un état complet de santé psychologique au travail, de même que sur ses facettes. Pour sa part, l’article empirique vise à explorer empiriquement la dynamique entre les demandes, ressources et un état unifié et complet de santé psychologique au travail. Pour ce faire, deux études utilisant des modélisations par équations structurelles sont effectuées. La première utilise un devis transversal et deux échantillons de 302 et 384 enseignants. Elle montre que les demandes et ressources au travail ont une incidence directe respectivement nocive et bénéfique sur la santé psychologique au travail. Cependant, contrairement à ce qui était attendu, les ressources au travail n’auraient pas d’effet modérateur. Ces résultats sont similaires d’un échantillon à l’autre. La seconde étude utilise un devis longitudinal, deux temps de mesure avec une année d’intervalle et un échantillon de 158 enseignants. Suite à une comparaison des relations de causalité normale, inverse et réciproque; elle démontre que la causalité normale serait le type de relation qui expliquerait le mieux les données. Ce constat vient donc renforcer les résultats de l’étude précédente et suggère qu’une diminution des demandes et une augmentation des ressources s’accompagneraient d’une augmentation de la santé psychologique au travail. En explorant théoriquement et empiriquement la dynamique entre les demandes, les ressources et la santé psychologique au travail, la présente thèse offre des bases théoriques novatrices et des bases empiriques solides pour les recherches traitant de demandes et de ressources au travail qui désire étudier un état complet et unifié de santé psychologique au travail, et considérer l’aspect distinct et interdépendant de ses facettes positives et négatives. En pratique, une telle approche permettrait aux décideurs de plus facilement identifier les leviers sur lesquels il importe d’investir pour maximiser la santé psychologique, car cette dernière serait représentée par un critère unique plutôt que plusieurs critères séparés (Mihalopoulos, Carter, Pirkis, & Vos, 2013).

The hotelling model with multiple demands

The purpose of this chapter is to provide an elementary introduction to the non-renewable resource model with multiple demand curves. The theoretical literature following Hotelling (1931) assumed that all energy needs are satisfied by one type of resource (e.g. ‘oil’), extractible at different per-unit costs. This formulation implicitly assumes that all users are the same distance from each resource pool, that all users are subject to the same regulations, and that motorist users can switch as easily from liquid fossil fuels to coal as electric utilities can. These assumptions imply, as Herfindahl (1967) showed, that in competitive equilibrium all users will exhaust a lower cost resource completely before beginning to extract a higher cost resource: simultaneous extraction of different grades of oil or of oil and coal should never occur. In trying to apply the single-demand curve model during the last twenty years, several teams of authors have independently found a need to generalize it to account for users differing in their (1) location, (2) regulatory environment, or (3) resource needs. Each research team found that Herfindahl's strong, unrealistic conclusion disappears in the generalized model; in its place, a weaker Herfindahl result emerges. Since each research team focussed on a different application, however, it has not always been clear that everyone has been describing the same generalized model. Our goal is to integrate the findings of these teams and to exposit the generalized model in a form which is easily accessible.

Contribution de modèle demande-contrôle-soutien à la variation des concentrations de cortisol salivaire

L’objectif principal de ce mémoire est d’approfondir les connaissances à propos de l’impact des stresseurs organisationnels sur la concentration du cortisol salivaire. Plus précisément, nous étudierons la contribution des modèles demande-contrôle de Karasek (1979) et demande-contrôle-soutien de Karasek et Theorell (1990) à la variation du cortisol salivaire chez les individus. Les associations entre les composantes principales de chacun des modèles (demandes psychologiques, latitude décisionnelle et soutien social), mais également les effets d’interaction inclus dans ces modèles, c’est-à-dire de l’effet modérateur de la latitude décisionnelle et du soutien social, seront étudiés. L’axe HPS a été associé aux symptômes de la santé mentale (Abelson et al., 2007; Havermans et al., 2011; Vreeburg et al., 2009b, 2010, 2013; Staufenbiel, 2013) ainsi qu’aux stresseurs en milieu de travail (Chida et Steptoe, 2009). À l’heure actuelle, le cortisol salivaire serait un indicateur de l’axe hypothalamo-pituito-surrénalien (HPS) le plus prometteur pour mesurer la réponse physiologique face à un événement stressant ou à un stress chronique (Maïna et al., 2009). Les données proviennent de l’étude SALVEO, menée par l’Équipe de recherche sur le travail et la santé mentale de l’Université de Montréal. Les résultats des analyses multiniveaux ne soutiennent pas l’implication du modèle demande-contrôle-soutien sur la concentration de cortisol. En effet, elles ne permettent pas de conclure que les effets, autant principaux que d’interaction, du modèle demande-contrôle-soutien expliquent la variation dans les concentrations de cortisol. La consommation de tabac est significativement reliée à la concentration de cortisol salivaire et doit être prise en considération dans les études futures. Par conséquent, ces résultats suggèrent que d’autres recherches sont nécessaires pour comprendre comment les stresseurs du travail s’incorporent à l’individu au niveau physiologique. Des connaissances approfondies de ces associations permettraient de mieux comprendre les associations entre le stress à long terme et les effets sur la santé, c’est-à-dire, comment les tensions au travail affectent la santé mentale à long terme (Karhula et al., 2015).

Relaxing the Tropics to an ‘observed’ state: analysis using a simple baroclinic model

The technique of relaxation of the tropical atmosphere towards an analysis in a month-season forecast model has previously been successfully exploited in a number of contexts. Here it is shown that when tropical relaxation is used to investigate the possible origin of the observed anomalies in June–July 2007, a simple dynamical model is able to reproduce the observed component of the pattern of anomalies given by an ensemble of ECMWF forecast runs. Following this result, the simple model is used for a range of experiments on time-scales of relaxation, variables and regions relaxed based on a control model run with equatorial heating in a zonal flow. A theory based on scale analysis for the large-scale tropics is used to interpret the results. Typical relationships between scales are determined from the basic equations, and for a specified diabatic heating a chain of deductions for determining the dependent variables is derived. Different critical time-scales are found for tropical relaxation of different dependent variables to be effective. Vorticity has the longest critical time-scale, typically 1.2 days. For temperature and divergence, the time-scales are 10 hours and 3 hours, respectively. However not all the tropical fields, in particular the vertical motion, are reproduced correctly by the model unless divergence is heavily damped. To obtain the correct extra-tropical fields, it is crucial to have the correct rotational flow in the subtropics to initiate the Rossby wave propagation from there. It is sufficient to relax vorticity or temperature on a time-scale comparable or less than their critical time-scales to obtain this. However if the divergent advection of vorticity is important in the Rossby Wave Source then strong relaxation of divergence is required to accurately represent the tropical forcing of Rossby waves.

Improving a convection-permitting model simulation of a cold air outbreak

A convection-permitting local-area model was used to simulate a cold air outbreak crossing from the Norwegian Sea into the Atlantic Ocean near Scotland. A control model run based on an operational configuration of the Met Office UKV high-resolution (1.5 km grid spacing) NWP model was compared to satellite, aircraft and radar data. While the control model captured the large-scale features of the synoptic situation, it was not able to reproduce the shallow (<1.5 km) stratiform layer to the north of the open cellular convection. Liquid water paths were found to be too low in both the stratiform and convective cloud regions. Sensitivity analyses including a modified boundary-layer diagnosis to generate a more well-mixed boundary layer and inhibition of ice formation to lower temperatures improved cloud morphology and comparisons with observational data. Copyright © 2013 Royal Meteorological Society and British Crown Copyright, the Met Office

Organizações sociais em Pernambuco: o desenho institucional do controle externo sobre os contratos de gestão

O objetivo desta pesquisa foi analisar o desenho institucional do controle externo sobre os contratos de gestão no âmbito do Tribunal de Contas do estado de Pernambuco quanto a sua aderência aos conteúdos da lei estadual que disciplina as Organizações Sociais e quanto a sua observância por parte dos atores envolvidos: Administração Pública, técnicos do tribunal de contas e membros do seu corpo julgador. Foram assumidas as seguintes premissas: que os novos arranjos de prestação de serviços públicos, por meio de parcerias com as Organizações Sociais, demandam por parte dos Tribunais de Contas desenhos institucionais de fiscalização específicos, que a pesar de variáveis devem primar por sua capacidade de revelar informações; que o processo de formatação destes desenhos institucionais deve ser dinâmico, permitindo-se que as contigências experimentadas na sua implementação possam contribuir no seu aperfeiçoamento; e que esses desenhos institucionais geram impacto no comportamento dos atores envolvidos. O estudo foi realizado por meio de pesquisa documental. A metodologia qualitativa de análise de conteúdo foi escolhida para análise dos dados. Os resultados da pesquisa permitiram concluir que o desenho institucional de controle dos contratos de gestão no âmbito do TCE-PE caracteriza-se por sua fragilidade como mecanismo de revelação de informação e, consequentemente, não contribui para a redução da assimetria de informação que se estabelece com a implementação dos contratos de gestão. Adicionalmente, compromete e limita o desempenho do Tribunal de Contas no controle destes ajustes. Verificou-se, também, uma a baixa observância do desenho institucional identificado, em que pese sua fragilidade, por parte dos atores envolvidos no controle dos contratos de gestão, implicando em uma baixa institucionalização deste desenho. Os resultados devem proporcionar uma rediscussão acerca dos mecanismos de controle dos contratos de gestão por parte do TCE-PE, que poderá resultar em um novo desenho institucional com vistas a conferir maior transparência às parcerias com as Organizações Sociais.

Integrating on-line process control and imperfect corrective maintenance: An economical design

Existing studies of on-line process control are concerned with economic aspects, and the parameters of the processes are optimized with respect to the average cost per item produced. However, an equally important dimension is the adoption of an efficient maintenance policy. In most cases, only the frequency of the corrective adjustment is evaluated because it is assumed that the equipment becomes "as good as new" after corrective maintenance. For this condition to be met, a sophisticated and detailed corrective adjustment system needs to be employed. The aim of this paper is to propose an integrated economic model incorporating the following two dimensions: on-line process control and a corrective maintenance program. Both performances are objects of an average cost per item minimization. Adjustments are based on the location of the measurement of a quality characteristic of interest in a three decision zone. Numerical examples are illustrated in the proposal. (c) 2012 Elsevier B.V. All rights reserved.

A Model of Emotion as Patterned Metacontrol

Adaptive systems use feedback as a key strategy to cope with uncertainty and change in their environments. The information fed back from the sensorimotor loop into the control architecture can be used to change different elements of the controller at four different levels: parameters of the control model, the control model itself, the functional organization of the agent and the functional components of the agent. The complexity of such a space of potential configurations is daunting. The only viable alternative for the agent ?in practical, economical, evolutionary terms? is the reduction of the dimensionality of the configuration space. This reduction is achieved both by functionalisation —or, to be more precise, by interface minimization— and by patterning, i.e. the selection among a predefined set of organisational configurations. This last analysis let us state the central problem of how autonomy emerges from the integration of the cognitive, emotional and autonomic systems in strict functional terms: autonomy is achieved by the closure of functional dependency. In this paper we will show a general model of how the emotional biological systems operate following this theoretical analysis and how this model is also of applicability to a wide spectrum of artificial systems.

A Model of Emotion as Patterned Metacontrol

Adaptive agents use feedback as a key strategy to cope with un- certainty and change in their environments. The information fed back from the sensorimotor loop into the control subsystem can be used to change four different elements of the controller: parameters associated to the control model, the control model itself, the functional organization of the agent and the functional realization of the agent. There are many change alternatives and hence the complexity of the agent’s space of potential configurations is daunting. The only viable alternative for space- and time-constrained agents —in practical, economical, evolutionary terms— is to achieve a reduction of the dimensionality of this configuration space. Emotions play a critical role in this reduction. The reduction is achieved by func- tionalization, interface minimization and by patterning, i.e. by selection among a predefined set of organizational configurations. This analysis lets us state how autonomy emerges from the integration of cognitive, emotional and autonomic systems in strict functional terms: autonomy is achieved by the closure of functional dependency. Emotion-based morphofunctional systems are able to exhibit complex adaptation patterns at a reduced cognitive cost. In this article we show a general model of how emotion supports functional adaptation and how the emotional biological systems operate following this theoretical model. We will also show how this model is also of applicability to the construction of a wide spectrum of artificial systems1.

A new approach to control of MIMO processes with static nonlinearities using an extended IMC framework

In this paper, a new control design method is proposed for stable processes which can be described using Hammerstein-Wiener models. The internal model control (IMC) framework is extended to accommodate multiple IMC controllers, one for each subsystem. The concept of passive systems is used to construct the IMC controllers which approximate the inverses of the subsystems to achieve dynamic control performance. The Passivity Theorem is used to ensure the closed-loop stability. (c) 2005 Elsevier Ltd. All rights reserved.

Contrast discrimination and pattern masking: contrast gain control with fixed additive noise

We studied the visual mechanisms that serve to encode spatial contrast at threshold and supra-threshold levels. In a 2AFC contrast-discrimination task, observers had to detect the presence of a vertical 1 cycle deg-1 test grating (of contrast dc) that was superimposed on a similar vertical 1 cycle deg-1 pedestal grating, whereas in pattern masking the test grating was accompanied by a very different masking grating (horizontal 1 cycle deg-1, or oblique 3 cycles deg-1). When expressed as threshold contrast (dc at 75% correct) versus mask contrast (c) our results confirm previous ones in showing a characteristic 'dipper function' for contrast discrimination but a smoothly increasing threshold for pattern masking. However, fresh insight is gained by analysing and modelling performance (p; percent correct) as a joint function of (c, dc) - the performance surface. In contrast discrimination, psychometric functions (p versus logdc) are markedly less steep when c is above threshold, but in pattern masking this reduction of slope did not occur. We explored a standard gain-control model with six free parameters. Three parameters control the contrast response of the detection mechanism and one parameter weights the mask contrast in the cross-channel suppression effect. We assume that signal-detection performance (d') is limited by additive noise of constant variance. Noise level and lapse rate are also fitted parameters of the model. We show that this model accounts very accurately for the whole performance surface in both types of masking, and thus explains the threshold functions and the pattern of variation in psychometric slopes. The cross-channel weight is about 0.20. The model shows that the mechanism response to contrast increment (dc) is linearised by the presence of pedestal contrasts but remains nonlinear in pattern masking.

Control-based channel governance and relative dependence

Control and governance theories recognize that exchange partners are subject to two general forms of control, the unilateral authority of one firm and bilateral expectations extending from their social bond. In this way, a supplier both exerts unilateral, authority-based controls and is subject to socially-based, bilateral controls as it attempts to manage its brand successfully through reseller channels. Such control is being challenged by suppliers’ growing relative dependence on increasingly dominant resellers in many industries. Yet the impact of supplier relative dependence on the efficacy of control-based governance in the supplier’s channel is not well understood. To address this gap, we specify and test a control model moderated by relative dependence involving the conceptualization and measurement of governance at the level of specific control processes: incenting, monitoring, and enforcing. Our empirical findings show relative dependence undercuts the effectiveness of certain unilateral and bilateral control processes while enhancing the effectiveness of others, largely supporting our dual suppositions that each control process operates through a specialized behavioral mechanism and that these underlying mechanisms are differentially impacted by relative dependence. We offer implications of these findings for managers and identify our contributions to channel theory and research.

Computerised control of cellular manufacturing systems

This thesis reviews the existing manufacturing control techniques and identifies their practical drawbacks when applied in a high variety, low and medium volume environment. It advocates that the significant drawbacks inherent in such systems, could impair their applications under such manufacturing environment. The key weaknesses identified in the system were: capacity insensitive nature of Material Requirements Planning (MRP); the centralised approach to planning and control applied in Manufacturing Resources Planning (MRP IT); the fact that Kanban can only be used in repetitive environments; Optimised Productivity Techniques's (OPT) inability to deal with transient bottlenecks, etc. On the other hand, cellular systems offer advantages in simplifying the control problems of manufacturing and the thesis reviews systems designed for cellular manufacturing including Distributed Manufacturing Resources Planning (DMRP) and Flexible Manufacturing System (FMS) controllers. It advocates that a newly developed cellular manufacturing control methodology, which is fully automatic, capacity sensitive and responsive, has the potential to resolve the core manufacturing control problems discussed above. It's development is envisaged within the framework of a DMRP environment, in which each cell is provided with its own MRP II system and decision making capability. It is a cellular based closed loop control system, which revolves on single level Bill-Of-Materials (BOM) structure and hence provides better linkage between shop level scheduling activities and relevant entries in the MPS. This provides a better prospect of undertaking rapid response to changes in the status of manufacturing resources and incoming enquiries. Moreover, it also permits automatic evaluation of capacity and due date constraints and hence facilitates the automation of MPS within such system. A prototype cellular manufacturing control model, was developed to demonstrate the underlying principles and operational logic of the cellular manufacturing control methodology, based on the above concept. This was shown to offer significant advantages from the prospective of operational planning and control. Results of relevant tests proved that the model is capable of producing reasonable due date and undertake automation of MPS. The overall performance of the model proved satisfactory and acceptable.

Psychosoziale Merkmale der Arbeit, Überforderungserleben und Depressivität

Die vorliegende Studie untersuchte die im Job-Demand-Control-Support-Modell und Effort-Reward-Imbalance-Modell beschriebenen Tätigkeitsmerkmale in Bezug auf Depressivität in einer Stichprobe von 265 Erwerbstätigen. Anhand konfirmatorischer Faktorenanalysen wurden Gemeinsamkeiten und Unterschiede beider Modelle geprüft. Anschließend wurde die Bedeutung der nachweisbaren Tätigkeitsmerkmale für die Vorhersage von Depressivität getestet und untersucht, inwieweit die Effekte durch Überforderungserleben mediiert werden. Die Analysen zeigten, dass die Modelle sowohl gemeinsame (Arbeitsintensität bzw. berufliche Anforderungen) als auch distinkte Arbeitsmerkmale (Tätigkeitsspielraum, Arbeitsplatzsicherheit, beruflicher Status, soziale Anerkennung) erfassen. Hohe Arbeitsintensität, geringe Arbeitsplatzsicherheit und fehlende soziale Anerkennung standen in signifikantem Zusammenhang mit Depressivität. Anders als erwartet war der berufliche Status positiv mit Depressivität assoziiert, während für den Tätigkeitsspielraum keine signifikanten Effekte nachweisbar waren. Das Pfadmodell bestätigte sowohl direkte als auch durch Überforderungserleben vermittelte Zusammenhänge zwischen den Tätigkeitsmerkmalen und Depressivität (39 % Varianzaufklärung). Die Ergebnisse bieten eine Grundlage für die Identifizierung potenzieller Risikofaktoren für das Auftreten depressiver Symptome am Arbeitsplatz. This study examined the job characteristics in the Job-Demand-Control-Support Model and in the Effort-Reward Imbalance Model with regard to depression in a sample of 265 employees. First, we tested by means of confirmatory factor analysis similarities and differences of the two models. Secondly, job characteristics were introduced as predictors in a path model to test their relation with depression. Furthermore, we examined whether the associations were mediated by the experience of excessive demands. Our analyses showed the demand/effort component to be one common factor, while decision latitude and reward (subdivided into the three facets of job security, social recognition, and status-related reward) remained distinctive components. Employees with high job demands/effort, low job security, low social recognition, but high status-related rewards reported higher depression scores. Unexpectedly, status-related rewards were positively associated with depression, while we found no significant effects for decision latitude. The path models confirmed direct as well as mediation effects (through experienced excessive demands) between job characteristics and depression (39 % explained variance in depression). Our results could be useful to identify possible job-related risk factors for depression.