染料掺杂聚合物薄膜放大自发发射和受激发射的研究

随着有机／聚合物电致发光材料在有机发光二极管上的应用以及有机晶体管和有机太阳能电池的研制成功，有机／聚合物电致发光材料的优异的光电性能、低廉的生产成本、简单的加工工艺、宽广的选材范围和良好的机械性能等优点极大地吸引科学家们的研究兴趣，并开始了有机／聚合物发光薄膜的放大的自发发射和受激发射行为的研究。有机分子和聚合物的诸多如易得、廉价、结构多样、功能易调节、大的横截面积、高的荧光量子效率和低的自吸收等优点使其制成的激光器在未来光纤通讯领域中呈现了诱人的应用前景。新的有机激光材料不断涌现、器件结构不断推陈出新、新的激发原理不断提出并得到修正已经成为有机／聚合物固体激光研究领域的三大特点。本论文以研究有机材料的激光特性为目的，通过对有机染料DCJTB和三芳胺取代1，8-蔡酰亚胺齐聚物掺杂聚合物薄膜的放大的自发发射和受激发射特性的研究，探讨实现低闭值、高增益光泵浦有机聚合物激光的方法及影响器件性能的因素，阐明放大自发发射的工作机制，为进一步探讨电泵浦有机聚合物激光器提供材料体系和理论依据。1、研究了DCJTB掺杂聚合物薄膜的放大自发发射特性，分析了光泵浦条件下光谱窄化的放大自发发射机制，对ASE增益和损耗进行了讨论和数值拟合，并对增益方程进行了饱和修正。DCJTB：PS薄膜具有较低的闺值（0．16mJ·Pulse~(_1)·cm-2）、高的增益系数（40．72cm-1）、低的损耗值2．49cm一l和高的荧光量子效率（70．4％），其波导增益的波长分布呈明显的洛仑兹分布，增益饱和是均匀展宽的。与DCM比较发现，自由体积是决定材料性能的重要因素，大的自由体积有利于实现低闭值、高增益。我们的研究结果表明，DCJTB是非常好的激光介质材料。2、从ASE的发射波长、ASE闭值、增益和损耗四个技术指标出发，详细研究了激发光波长、聚合物基体、旋涂速度及基片等对DCJTB：PS薄膜放大自发发射（ASE）的影响，短的激发波长和合适的基体材料可以显著地降低闭值和提高增益，薄膜厚度和基片也对ASE性能有很大影响。利用琢lord镜面体系，研究了DCJTB染料掺杂相列向液晶体系的分布反馈激光特性，在电场作用下，可以有效地对TE、TM两种模式的输出强度进行调解。3、把电子传输／发光有机小分子材料Alq3掺杂到DCJTB和C545T掺杂聚合物薄膜，研究了它们的放大自发发射特性。通过在不同激发光波长激发下不同Alq3掺杂浓度对ASE性能影响的研究，发现掺杂Alq3显著地降低了闭值，增加了增益和减小了损耗。由于Alq3是一种良好的半导体有机发光材料，Alq3的引入对电泵浦有机聚合物激光器的研究具有重要的意义。4、研究了三种在4位氨基位置引入不同三芳胺功能基团的红光1，8-蔡酞亚胺齐聚物的放大自发发射特性，研究结果表明，三芳胺取代1，8蔡酞亚胺齐聚物具有低阂值、高增益和低损耗的特点，显示了较小的浓度淬灭效应，即使掺杂浓度高到60％仍可以观察到放大的自发发射现象，表明三芳胺取代1，8茶酞亚胺是一类非常有应用前景的有机半导体激光材料体系。

An Ameliorated Phase Generated Carrier Demodulation Algorithm With Low Harmonic Distortion and High Stability

A novel ameliorated phase generated carrier (PGC) demodulation algorithm based on arctangent function and differential-self-multiplying (DSM) is proposed in this paper. The harmonic distortion due to nonlinearity and the stability with light intensity disturbance (LID) are investigated both theoretically and experimentally. The nonlinearity of the PGC demodulation algorithm has been analyzed and an analytical expression of the total-harmonic-distortion (THD) has been derived. Experimental results have confirmed the low harmonic distortion of the ameliorated PGC algorithm as expected by the theoretical analysis. Compared with the traditional PGC-arctan and PGC-DCM algorithm, the ameliorated PGC algorithm has a much lower THD as well as a better signal-to-noise-and-distortion (SINAD). A THD of below 0.1% and a SINAD of 60 dB have been achieved with PGC modulation depth (value) ranges from 1.5 to 3.5 rad. The stability performance with LID has also been studied. The ameliorated PGC algorithm has a much higher stability than the PGC-DCM algorithm. It can keep stable operations with LID depth as large as 26.5 dB and LID frequency as high as 1 kHz. The system employing the ameliorated PGC demodulation algorithm has a minimum detectable phase shift of 5 mu rad/root Hz @ 1 kHz, a large dynamic range of 120 dB @ 100 Hz, and a high linearity of better than 99.99%.

细菌二氯甲烷脱氯酶基因对拟南芥的转化

The dichloromethane dehalogenase gene (dcm) of Methylophilus was cloned into the plasmid pKYLX71-35S2 and fused with the 35S2 promotor,then transformed Arabidopsis by the infiltration mediated with Agrobacterium tumefaciens. Homozygous dcm seeds were obtained after several generations selection on the medium with 50 mg L -1 kanamycin.Northern blotting showed dcm mRNA was high in cytoplasm and the detection of DCM enzyme indicated that the lines containing high dcm mRNA expressed high DCM enzyme activities. Fig 4, Ref 9

Amplified spontaneous emission and gain from optically pumped films of dye-doped polymers

The amplified spontaneous emission and gain characteristics of various fluorescent dyes, 2-(1,1-dimethylethyl)-6(2-(2,3,6,7-tetrahydro-1,1,7,7-tetramethyl-1H,5H-benzo[ij] quinolizin-9-1)ethenyl)-4H-pyran-4-ylidene) propanedinitrile (DCJTB) and 4-dicyanomethylene-2-methyl-6-(p-dimethyl-aminostyryl)-4H-pyran (DCM), doped in polystyrene (PS) matrices were studied and compared. It was found that DCJTB has a larger net gain, 40.72 cm(-1), a lower loss, 2.49 cm(-1), and a lower threshold, 0.16 (mJ/pulse)/cm(2), than DCM, which has a net gain of 11.95 cm(-1), a loss of 9.25 cm(-1), and a threshold of 4(mJ/pulse)/cm(2). The improvement of performance in DCJTB PS films is attributed to the larger free volume of DCJTB caused by the introduction of steric spacer groups into the DCJTB molecule.

Photoluminescent properties of dye-doped poly(N-vinyleabzole) (PVK) in microcavity

A surface emitting microcavity was formed by sandwiching a polymer film containing poly(N-vinyleabzole) (PVK). 8-hydroxyquinoline aluminium (Alq(3)) and 4-(Dicyanome thylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-Pyran(DCM) between a distributed Bragg reflector (DBR) with a reflectivity of 99% and a silver film. The sample was optically pumped with 250 ps pulses at 2 Hz repetition rate by a 355 nm line of the third harmonic of a mode-lock Nd:YAG laser. The lasing phenomenon was observed in DCM-doped PVK microcavity. The full width at half maximum (FWHM) was 3 nm with the peak wavelength at 602 nm. The threshold energy for lasing was estimated to be about 3 mu J. (C) 2000 Elsevier Science S.A. All rights reserved.

中国近海浮游植物光合作用研究——初级生产力模型计算与活体叶绿素荧光测量

本文的研究内容是初级生产力模型计算方法以及活体叶绿素荧光测量方法在我国近海浮游植物光合作用研究中的应用。 论文对在我国近海实测的1321 组叶绿素垂直分布数据以及84 组初级生产力数据进行了非线性拟合分析，得出了描述叶绿素和初级生产力垂直变化规律的相应参数。结合光合参数——初始斜率α 的平面分布将我国近海分为9 个光合作用特征相对独立的分区。以光强和遥感叶绿素为输入变量，以各分区实测参数的平均值为模型参数，首次建立了分海区的时间－深度积分初级生产力计算模型。 对拟合参数的分析表明：我国近海深水叶绿素峰（DCM）在夏季最明显而在冬季则不明显，这与夏季温跃层的形成和冬季温跃层消失的规律相符合。最大光合速率参数主要受温度和营养盐状况的影响，但整体而言各个季节的变化不大。光合作用初始斜率参数主要受浮游植物光照条件和光照历史的影响，从春季到冬季持续增加，基本与光照强度的变化刚好相反。光抑制参数反映着浮游植物对高光强伤害的敏感性，它在夏、秋季较低而在冬季较高。 模型计算结果表明我国近海初级生产力规模约为6.4±1.0×108tC/a。总体来说我国近海海域初级生产力北方高于南方，西部高于东部。北方初级生产力高峰期大都出现在夏季而南方出现在冬季，中部则高峰期出现在春秋两季，与温跃层出现和消失的规律有一定的相关性。与由实测生产力推算的初级生产力相比，本模型的计算结果较高，误差产生的原因包括二类水体遥感叶绿素浓度偏高、地形因素等。与VGPM相比较，本模型的计算结果更接近于实测结果。模型中云覆盖度参数的变化可能引起计算结果约25％的变化，当取云覆盖度参数为0.5 时的计算结果与用实际天气状况数据的计算结果较为接近。制作了基于分区模型的水柱初级生产力计算软件，可在仅测量叶绿素浓度的情况下进行水柱初级生产力的计算。 模型准确度的进一步提高的途径主要包括实测参数数量的增加以及遥感叶绿素浓度准确性的提高。 与初级生产力相比，活体叶绿素荧光测量可以更快速、简便地跟踪浮游植光合作用动态。本研究首次将活体叶绿素荧光测量方法应用于野外浮游植物光合作用状态研究。通过暗驰豫实验，建立了使用OS5－AFM藻类荧光仪现场测定活体叶绿素荧光参数——Fv/Fm（光化学效率）的操作方法，并对胶州湾海域浮游植物光化学效率进行了高时空分辨率的调查，对相关因素进行了分析，并尝试通过Fv/Fm进行初级生产力计算。 结果表明，胶州湾海域表层Fv/Fm值的全年平均值约0.37，处于中等偏低水平。Fv/Fm值在秋季最高而春季最低，其平面分布在夏季较均匀而在春季则有较大的区域差异。湾东部Fv/Fm值变化幅度较大，一年中有4 个高峰期；而湾西部Fv/Fm值变化幅度较小，一年中有3 个高峰期。光合作用最活跃的海区随季节更替而变化，其年变化模式可能具有一定的重复性。不同深度上Fv/Fm值的海区平均值没有显著差异，但底层Fv/Fm值的空间差异较小。 通过对营养盐和Fv/Fm值时间变化的分析，首次发现了自然水体中Fv/Fm值变化对氮盐浓度变化响应的滞后效应，在不同的站点，影响Fv/Fm值的氮盐种类有所不同，湾西部海域与NH4+相关性较高而湾东部海域与NO3-的相关性较高，P、Si等则与Fv/Fm值基本无相关性。滞后期的长度并不稳定，1 旬和2 旬的滞后现象都可观察到。Fv/Fm值变化率与氮盐浓度变化率之间的相关性高于Fv/Fm值与氮盐浓度之间的相关性。这表明即使在胶州湾这样无机氮浓度很高、浮游植物生长基本不受氮源限制的水体，氮源浓度的变化仍然影响着浮游植物的光合作用状态。 初步建立了由Fv/Fm测量结果计算初级生产力的方法。模型的计算结果与文献资料中胶州湾水域初级生产力的时空分布趋势基本一致，但在数量上明显低于传统估算的结果。获得更多同步测量的初级生产力和Fv/Fm值数据可逐渐改善这一方法计算结果的准确性，并可籍次方法更快更方便地进行初级生产力的测算。

便携式移动机器人INS/GPS组合导航系统研究

基于捷联惯导系统（INS）与全球定位系统（GPS）定位技术的发展以及机器人导航的需要，本文对INS与GPS的组合导航系统进行了研究。捷联惯导系统与GPS导航各有优缺点，具有互补性，文中将两者结合形成了更加准确可靠的定位系统。本文首先介绍了捷联惯导系统和全球定位系统，并对捷联惯导和GPS的误差作了详细的分析，建立了误差模型。文中应用动力学误差方程建立了九状态INS/GPS综合卡尔曼滤波方程。提出了一种以位置、速度、姿态DCM的误差为状态量，以GPS和INS的位置差作为观测量的INS/GPS组合导航系统的滤波算法，并将该技术应用于机器人的定位导航。仿真实验表明，该算法可有效提高系统导航参数的估计精度。本文分五章对该课题进行了研究。第一章是引言，介绍了课题的研究背景、意义，国内外的研究现状和本文的主要工作；第二章介绍了惯性传感器和GPS接收器的原理和特性；第三章介绍了捷联惯导系统相关的理论知识，包括姿态角的解算，算法具体内容和误差分析，并对捷联惯导系统进行了仿真试验；第四章介绍了Kalman滤波的相关知识并详细介绍了INS/GPS组合导航系统；第五章对INS/GPS组合导航系统的九状态卡尔曼滤波算法进行了仿真，并对试验结果进行了详细的分析。从仿真结果可知，组合导航系统大大的提高了系统的精度，克服了纯惯导系统的缺点。

视觉通路在汉字组块破解过程中的有效连接

The present study used Dynamical Causal Modeling (DCM) to reveal the influence of difficult to decompose Chinese characters on the effective connectivity of “where” and “what” visual stream。 Chunk decomposition is to decompose the familiar items to their components and then to make up new items with the decomposed components。 Some previous studies with eye movements and brain image had revealed that the chunk decomposition was involved visual-spatial information process, and suggested that “what” and “where” visual streams contributed to the course of chunk decomposition。 However, how they worked to complete the chunk decomposition task is still unknown。 The present study has two factors, familiarity and tightness of the spatial structures, each with 2 levels: real words vs. pseudowords and tight chunks vs. loose chunks。 The results indicates that in the loose conditions, familiarity increases the effective connectivity of “where ” stream, while in the pseudowords conditions, tightness of the spatial structures increases the effective connectivity of both “where” and “what” streams, and familiarity and tightness combined to increase not only both the “what” and “where” streams, but also the effective connectivity from the inferior temporal gyrus to the superior parietal lobule.

Dynamic neural networks supporting memory retrieval.

How do separate neural networks interact to support complex cognitive processes such as remembrance of the personal past? Autobiographical memory (AM) retrieval recruits a consistent pattern of activation that potentially comprises multiple neural networks. However, it is unclear how such large-scale neural networks interact and are modulated by properties of the memory retrieval process. In the present functional MRI (fMRI) study, we combined independent component analysis (ICA) and dynamic causal modeling (DCM) to understand the neural networks supporting AM retrieval. ICA revealed four task-related components consistent with the previous literature: 1) medial prefrontal cortex (PFC) network, associated with self-referential processes, 2) medial temporal lobe (MTL) network, associated with memory, 3) frontoparietal network, associated with strategic search, and 4) cingulooperculum network, associated with goal maintenance. DCM analysis revealed that the medial PFC network drove activation within the system, consistent with the importance of this network to AM retrieval. Additionally, memory accessibility and recollection uniquely altered connectivity between these neural networks. Recollection modulated the influence of the medial PFC on the MTL network during elaboration, suggesting that greater connectivity among subsystems of the default network supports greater re-experience. In contrast, memory accessibility modulated the influence of frontoparietal and MTL networks on the medial PFC network, suggesting that ease of retrieval involves greater fluency among the multiple networks contributing to AM. These results show the integration between neural networks supporting AM retrieval and the modulation of network connectivity by behavior.

Cytotoxicity Induced by Extracts of Pisolithus tinctorius Spores on Human Cancer and Normal Cell Lines—Evaluation of the Anticancer Potential

Fungi have been considered a potential source of natural anticancer drugs. However, studies on these organisms have mainly focused on compounds present in the sporocarp and mycelium. The aim of this study was to assess the anticancer potential of fungal spores using a bioassay-guided fractionation with cancer and normal cell lines. Crude extracts from spores of the basidiomycetous fungus Pisolithus tinctorius were prepared using five solvents/solvent mixtures in order to select the most effective crude extraction procedure. A dichloromethane/methanol (DCM/MeOH) mixture was found to produce the highest extraction yield, and this extract was fractionated into 11 fractions. Crude extracts and fractions were assayed for cytotoxicity in the human osteocarcinoma cell line MG63, the human breast carcinoma cell line T47D, the human colon adenocarcinoma cell line RKO, and the normal human brain capillary endothelial cell line hCMEC/D3. Cytotoxicity was assessed by the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) reduction assay. The results showed a reduction in cancer cell viability of approximately 95% with 4 of 11 fractions without a significant reduction in viability of hCMEC/D3 cells. Data demonstrated that spores of P. tinctorius might serve as an interesting source of compounds with potential anticancer properties.

Long-term miR-669a therapy alleviates chronic dilated cardiomyopathy in dystrophic mice.

BACKGROUND: Dilated cardiomyopathy (DCM) is a leading cause of chronic morbidity and mortality in muscular dystrophy (MD) patients. Current pharmacological treatments are not yet able to counteract chronic myocardial wastage, thus novel therapies are being intensely explored. MicroRNAs have been implicated as fine regulators of cardiomyopathic progression. Previously, miR-669a downregulation has been linked to the severe DCM progression displayed by Sgcb-null dystrophic mice. However, the impact of long-term overexpression of miR-669a on muscle structure and functionality of the dystrophic heart is yet unknown. METHODS AND RESULTS: Here, we demonstrate that intraventricular delivery of adeno-associated viral (AAV) vectors induces long-term (18 months) miR-669a overexpression and improves survival of Sgcb-null mice. Treated hearts display significant decrease in hypertrophic remodeling, fibrosis, and cardiomyocyte apoptosis. Moreover, miR-669a treatment increases sarcomere organization, reduces ventricular atrial natriuretic peptide (ANP) levels, and ameliorates gene/miRNA profile of DCM markers. Furthermore, long-term miR-669a overexpression significantly reduces adverse remodeling and enhances systolic fractional shortening of the left ventricle in treated dystrophic mice, without significant detrimental consequences on skeletal muscle wastage. CONCLUSIONS: Our findings provide the first evidence of long-term beneficial impact of AAV-mediated miRNA therapy in a transgenic model of severe, chronic MD-associated DCM.

Studies toward the total synthesis of natural and unnatural aeruginosins

Nous avons démontré l’utilité du groupement protecteur tert-butylsulfonyle (N-Bus) pour la chimie des acides aminés et des peptides. Celui-ci est préparé en deux étapes, impliquant la réaction d’une amine avec le chlorure de tert-butylsulfinyle, suivie par l’oxydation par du m-CPBA, pour obtenir les tert-butylsulfonamides correspondants avec d’excellents rendements. Le groupement N-Bus peut être clivé par traitement avec 0.1 N TfOH/DCM/anisole à 0oC en 10h pour régénérer le sel d’ammonium. Une variété d’acides aminés N-Bus protégés ainsi que d’autres aminoacides peuvent alors être utilisés pour préparer divers dipeptides et tripeptides. A l’exception du groupe N-Fmoc, les conditions de déprotection du groupe N-Bus clivent également les groupements N-Boc, N-Cbz et O-Bn. Une déprotection sélective et orthogonale des groupes N-Boc, N-Cbz, N-Fmoc et O-Bn est également possible en présence du groupe protecteur N-Bus. Le nouvel acide aminé non-naturel (3R, 2R) 3–méthyl-D-leucine (β-Me-Leu) et son régioisomère 2-méthyle ont été synthétisés par ouverture d’une N-Ts aziridine en présence d’un excès de LiMe2Cu. Chacun des régioisomères du mélange (1:1,2) a été converti en la méthylleucine correspondante, puis couplé à l’acide D-phényllactique puis au motif 2-carboxyperhydroindole 4-amidinobenzamide en présence de DEPBT. Des élaborations ultérieures ont conduit à des analogues peptidiques non-naturels d’aeruginosines telles que la chlorodysinosine A. Les deux analogues ont ensuite été évalués pour leur activité inhibitrice de la thrombine et la trypsine. La présumée aeruginosine 3-sulfate 205B et son anomère β ont été synthétisés avec succès à partir de 5 sous-unités : la 3-chloroleucine, l’acide D-phényllactique, le D-xylose, le 2-carboxy-6-hydroxyoctahydroindole et l’agmatine. La comparaison des données RMN 1H et 13C reportées avec celles obtenues avec l’aeruginosine synthétique 205B révèle une différence majeure pour la position du groupe présumé 3'-sulfate sur l’unité D-xylopyranosyle. Nous avons alors synthétisés les dérivés méthyl-α-D-xylopyranosides avec un groupement sulfate à chacune des positions hydroxyles, afin de démontrer sans ambiguïté la présence du sulfate en position C-4' par comparaison des données spectroscopiques RMN 1H et 13C. La structure de l’aeruginosine 205B a alors été révisée. Une des étapes-clés de cette synthèse consiste en la formation du glycoside avec le groupe hydroxyle en C-6 orienté en axial sur la sous-unité Choi. Le 2-thiopyridylcarbonate s’est avéré une méthode efficace pour l’activation anomérique. Le traitement par AgOTf et la tétraméthylurée en solution dans un mélange éther-DCM permet d’obtenir l’anomère α désiré, qui peut alors être aisément séparé de l’anomère β par chromatographie

Synthesis, Characterization and Applications of Modified TiO2 Systems

This thesis is divided in to 9 chapters and deals with the modification of TiO2 for various applications include photocatalysis, thermal reaction, photovoltaics and non-linear optics. Chapter 1 involves a brief introduction of the topic of study. An introduction to the applications of modified titania systems in various fields are discussed concisely. Scope and objectives of the present work are also discussed in this chapter. Chapter 2 explains the strategy adopted for the synthesis of metal, nonmetal co-doped TiO2 systems. Hydrothermal technique was employed for the preparation of the co-doped TiO2 system, where Ti[OCH(CH3)2]4, urea and metal nitrates were used as the sources for TiO2, N and metals respectively. In all the co-doped systems, urea to Ti[OCH(CH3)2]4 was taken in a 1:1 molar ratio and varied the concentration of metals. Five different co-doped catalytic systems and for each catalysts, three versions were prepared by varying the concentration of metals. A brief explanation of physico-chemical techniques used for the characterization of the material was also presented in this chapter. This includes X-ray Diffraction (XRD), Raman Spectroscopy, FTIR analysis, Thermo Gravimetric Analysis, Energy Dispersive X-ray Analysis (EDX), Scanning Electron Microscopy(SEM), UV-Visible Diffuse Reflectance Spectroscopy (UV-Vis DRS), Transmission Electron Microscopy (TEM), BET Surface Area Measurements and X-ray Photoelectron Spectroscopy (XPS). Chapter 3 contains the results and discussion of characterization techniques used for analyzing the prepared systems. Characterization is an inevitable part of materials research. Determination of physico-chemical properties of the prepared materials using suitable characterization techniques is very crucial to find its exact field of application. It is clear from the XRD pattern that photocatalytically active anatase phase dominates in the calcined samples with peaks at 2θ values around 25.4°, 38°, 48.1°, 55.2° and 62.7° corresponding to (101), (004), (200), (211) and (204) crystal planes (JCPDS 21-1272) respectively. But in the case of Pr-N-Ti sample, a new peak was observed at 2θ = 30.8° corresponding to the (121) plane of the polymorph brookite. There are no visible peaks corresponding to dopants, which may be due to their low concentration or it is an indication of the better dispersion of impurities in the TiO2. Crystallite size of the sample was calculated from Scherrer equation byusing full width at half maximum (FWHM) of the (101) peak of the anatase phase. Crystallite size of all the co-doped TiO2 was found to be lower than that of bare TiO2 which indicates that the doping of metal ions having higher ionic radius into the lattice of TiO2 causes some lattice distortion which suppress the growth of TiO2 nanoparticles. The structural identity of the prepared system obtained from XRD pattern is further confirmed by Raman spectra measurements. Anatase has six Raman active modes. Band gap of the co-doped system was calculated using Kubelka-Munk equation and that was found to be lower than pure TiO2. Stability of the prepared systems was understood from thermo gravimetric analysis. FT-IR was performed to understand the functional groups as well as to study the surface changes occurred during modification. EDX was used to determine the impurities present in the system. The EDX spectra of all the co-doped samples show signals directly related to the dopants. Spectra of all the co-doped systems contain O and Ti as the main components with low concentrations of doped elements. Morphologies of the prepared systems were obtained from SEM and TEM analysis. Average particle size of the systems was drawn from histogram data. Electronic structures of the samples were identified perfectly from XPS measurements. Chapter 4 describes the photocatalytic degradation of herbicides Atrazine and Metolachlor using metal, non-metal co-doped titania systems. The percentage of degradation was analyzed by HPLC technique. Parameters such as effect of different catalysts, effect of time, effect of catalysts amount and reusability studies were discussed. Chapter 5 deals with the photo-oxidation of some anthracene derivatives by co-doped catalytic systems. These anthracene derivatives come underthe category of polycyclic aromatic hydrocarbons (PAH). Due to the presence of stable benzene rings, most of the PAH show strong inhibition towards biological degradation and the common methods employed for their removal. According to environmental protection agency, most of the PAH are highly toxic in nature. TiO2 photochemistry has been extensively investigated as a method for the catalytic conversion of such organic compounds, highlighting the potential of thereof in the green chemistry. There are actually two methods for the removal of pollutants from the ecosystem. Complete mineralization is the one way to remove pollutants. Conversion of toxic compounds to another compound having toxicity less than the initial starting compound is the second way. Here in this chapter, we are concentrating on the second aspect. The catalysts used were Gd(1wt%)-N-Ti, Pd(1wt%)-N-Ti and Ag(1wt%)-N-Ti. Here we were very successfully converted all the PAH to anthraquinone, a compound having diverse applications in industrial as well as medical fields. Substitution of 10th position of desired PAH by phenyl ring reduces the feasibility of photo reaction and produced 9-hydroxy 9-phenyl anthrone (9H9PA) as an intermediate species. The products were separated and purified by column chromatography using 70:30 hexane/DCM mixtures as the mobile phase and the resultant products were characterized thoroughly by 1H NMR, IR spectroscopy and GCMS analysis. Chapter 6 elucidates the heterogeneous Suzuki coupling reaction by Cu/Pd bimetallic supported on TiO2. Sol-Gel followed by impregnation method was adopted for the synthesis of Cu/Pd-TiO2. The prepared system was characterized by XRD, TG-DTG, SEM, EDX, BET Surface area and XPS. The product was separated and purified by column chromatography using hexane as the mobile phase. Maximum isolated yield of biphenyl of around72% was obtained in DMF using Cu(2wt%)-Pd(4wt%)-Ti as the catalyst. In this reaction, effective solvent, base and catalyst were found to be DMF, K2CO3 and Cu(2wt%)-Pd(4wt%)-Ti respectively. Chapter 7 gives an idea about the photovoltaic (PV) applications of TiO2 based thin films. Due to energy crisis, the whole world is looking for a new sustainable energy source. Harnessing solar energy is one of the most promising ways to tackle this issue. The present dominant photovoltaic (PV) technologies are based on inorganic materials. But the high material, low power conversion efficiency and manufacturing cost limits its popularization. A lot of research has been conducted towards the development of low-cost PV technologies, of which organic photovoltaic (OPV) devices are one of the promising. Here two TiO2 thin films having different thickness were prepared by spin coating technique. The prepared films were characterized by XRD, AFM and conductivity measurements. The thickness of the films was measured by Stylus Profiler. This chapter mainly concentrated on the fabrication of an inverted hetero junction solar cell using conducting polymer MEH-PPV as photo active layer. Here TiO2 was used as the electron transport layer. Thin films of MEH-PPV were also prepared using spin coating technique. Two fullerene derivatives such as PCBM and ICBA were introduced into the device in order to improve the power conversion efficiency. Effective charge transfer between the conducting polymer and ICBA were understood from fluorescence quenching studies. The fabricated Inverted hetero junction exhibited maximum power conversion efficiency of 0.22% with ICBA as the acceptor molecule. Chapter 8 narrates the third order order nonlinear optical properties of bare and noble metal modified TiO2 thin films. Thin films were fabricatedby spray pyrolysis technique. Sol-Gel derived Ti[OCH(CH3)2]4 in CH3CH2OH/CH3COOH was used as the precursor for TiO2. The precursors used for Au, Ag and Pd were the aqueous solutions of HAuCl4, AgNO3 and Pd(NO3)2 respectively. The prepared films were characterized by XRD, SEM and EDX. The nonlinear optical properties of the prepared materials were investigated by Z-Scan technique comprising of Nd-YAG laser (532 nm,7 ns and10 Hz). The non-linear coefficients were obtained by fitting the experimental Z-Scan plot with the theoretical plots. Nonlinear absorption is a phenomenon defined as a nonlinear change (increase or decrease) in absorption with increasing of intensity. This can be mainly divided into two types: saturable absorption (SA) and reverse saturable absorption (RSA). Depending on the pump intensity and on the absorption cross- section at the excitation wavelength, most molecules show non- linear absorption. With increasing intensity, if the excited states show saturation owing to their long lifetimes, the transmission will show SA characteristics. Here absorption decreases with increase of intensity. If, however, the excited state has strong absorption compared with that of the ground state, the transmission will show RSA characteristics. Here in our work most of the materials show SA behavior and some materials exhibited RSA behavior. Both these properties purely depend on the nature of the materials and alignment of energy states within them. Both these SA and RSA have got immense applications in electronic devices. The important results obtained from various studies are presented in chapter 9.

Patent DE10 2004 037 519 B4 “Sensor Process and Device for Determining a Physical Value“. A Proof of Concept

At present, a fraction of 0.1 - 0.2% of the patients undergoing surgery become aware during the process. The situation is referred to as anesthesia awareness and is obviously very traumatic for the person experiencing it. The reason for its occurrence is mostly an insufficient dosage of the narcotic Propofol combined with the incapability of the technology monitoring the depth of the patient’s anesthetic state to notice the patient becoming aware. A solution can be a highly sensitive and selective real time monitoring device for Propofol based on optical absorption spectroscopy. Its working principle has been postulated by Prof. Dr. habil. H. Hillmer and formulated in DE10 2004 037 519 B4, filed on Aug 30th, 2004. It consists of the exploitation of Intra Cavity Absorption effects in a two mode laser system. In this Dissertation, a two mode external cavity semiconductor laser, which has been developed previously to this work is enhanced and optimized to a functional sensor. Enhancements include the implementation of variable couplers into the system and the implementation of a collimator arrangement into which samples can be introduced. A sample holder and cells are developed and characterized with a focus on compatibility with the measurement approach. Further optimization concerns the overall performance of the system: scattering sources are reduced by re-splicing all fiber-to-fiber connections, parasitic cavities are eliminated by suppressing the Fresnel reflexes of all one fiber ends by means of optical isolators and wavelength stability of the system is improved by the implementation of thermal insulation to the Fiber Bragg Gratings (FBG). The final laser sensor is characterized in detail thermally and optically. Two separate modes are obtained at 1542.0 and 1542.5 nm, tunable in a range of 1nm each. Mode Full Width at Half Maximum (FWHM) is 0.06nm and Signal to Noise Ratio (SNR) is as high as 55 dB. Independent of tuning the two modes of the system can always be equalized in intensity, which is important as the delicacy of the intensity equilibrium is one of the main sensitivity enhancing effects formulated in DE10 2004 037 519 B4. For the proof of concept (POC) measurements the target substance Propofol is diluted in the solvents Acetone and DiChloroMethane (DCM), which have been investigated for compatibility with Propofol beforehand. Eight measurement series (two solvents, two cell lengths and two different mode spacings) are taken, which draw a uniform picture: mode intensity ratio responds linearly to an increase of Propofol in all cases. The slope of the linear response indicates the sensitivity of the system. The eight series are split up into two groups: measurements taken in long cells and measurements taken in short cells.

Unsymmetrisch substituierte N-heterocyclische Carbene mit einem 1,1 ʹ-Ferrocendiyl-Rückgrat und N-heterocyclische Carbene als Adsorbatspezies für selbstorganisierende Monolagen

Aufbauend auf den Arbeiten von Bielawski et al. und Siemeling et al. wurden im Rahmen dieser Arbeit unsymmetrisch substituierte N-heterocyclische Carbene mit einem 1,1ʹ-Ferrocendiyl-Rückgrat synthetisiert. Ausgehend von der literaturbekannten Verbindung 1,1’-Diaminoferrocen gelang die Einführung der exocyclischen Substituenten an den Stickstoffatomen lediglich durch die Anpassung der Stöchiometrie in den einzelnen Syntheseschritten. Es wurden die folgenden drei NHCs synthetisiert: N-(2-Adamantyl)-N’-neopentyldiaminocarben[3]ferrocenophan (Ad/Np), N-Neopentyl-N’-phenyldiaminocarben[3]ferrocenophan (Ph/Np) und N-(9-Anthracenylmethyl)-N’-neopentyldiaminocarben[3]ferrocenophan (Acm/Np). Das Carben Ad/Np konnte dabei erfolgreich isoliert werden, während die anderen zwei Carbene als Liganden in Komplexen des Typs [RhCl(COD)(NHC)] stabilisiert wurden. Von allen drei Carbenen wurden Rhodium-Carben-Komplexe des Typs [RhCl(COD)(NHC)] und cis-[RhCl(CO)2(NHC)] synthetisiert. Anhand der röntgenkristallographischen und NMR-spektroskopischen Untersuchungen dieser Rhodiumkomplexe konnten in allen sechs Komplexen anagostische Wechselwirkungen zwischen dem zentralen Rhodiumatom und den Wasserstoffatomen der exocyclischen Substituenten, die sich in α-Position zu den Stickstoffatomen befinden, nachgewiesen werden. Des Weiteren wurden anhand der cis-[RhCl(CO)2(NHC)]-Komplexe die TEP-Werte der Carbene bestimmt. Gemessen in DCM betragen diese 2049 cm-1 (Ad/Np), 2049 cm-1 (Ph/Np) und 2051 cm-1 (Acm/Np). Unabhängig von den unsymmetrisch substituierten NHCs mit einem 1,1ʹ-Ferrocendiyl-Rückgrat wurde im Rahmen dieser Arbeit die Eignung von NHCs als Adsorbatspezies für selbstorganisierende Monolagen überprüft. Hierzu wurden Tetraalkylimidazol-2-ylidene synthetisiert, welche als 0.01 mM Lösung auf Gold(111)-Substrate aufgebracht wurden. Die Goldsubstrate wurden anschließend mittels XPS untersucht. Die XPS-Analyse der modifizierten Goldsubstrate zeigte, dass eine Bindung der Carbene auf der Oberfläche stattgefunden hat. Es zeigte sich allerdings auch, dass keine SAM gebildet wurden, da die Oberfläche signifikant mit kohlen- und sauerstoffbasierten Verbindungen kontaminiert ist. Dabei kann vermutet werden, dass die Carbene nicht ausschließlich auf der Goldoberfläche selbst, sondern auch mit den auf der Oberfläche befindlichen Verbindungen reagiert haben.