A Design methodology for integrated inductor-based DC-DC converters

A design methodology for monolithic integration of inductor based DC-DC converters is proposed in this paper. A power loss model of the power stage, including the drive circuits, is defined in order to optimize efficiency. Based on this model and taking as reference a 0.35 mu m CMOS process, a buck converter was designed and fabricated. For a given set of operating conditions the defined power loss model allows to optimize the design parameters for the power stage, including the gate-driver tapering factor and the width of the power MOSFETs. Experimental results obtained from a buck converter at 100 MHz switching frequency are presented to validate the proposed methodology.

Dimensionamento de um sistema UPS flywheel

Nesta dissertação, numa primeira fase, é efetuado um estudo ao estado da arte da qualidade de energia elétrica e do volante de inércia mais conhecido por flywheel. Como primeiro tópico da primeira fase é efetuado um estudo das perturbações possíveis, baseado na sua forma de onda, são representadas graficamente as diversas perturbações, é efetuada uma análise das possíveis causas para cada perturbação e por fim, também são apresentadas as possíveis soluções para as mesmas perturbações. Como possíveis soluções, são apresentados os vários sistemas de armazenamento nomeadamente, UPS (fonte de alimentação ininterrupta), volantes de inércia, entre outros sistemas. No segundo tópico é efetuada uma introdução ao sistema flywheel, apresentando alguns aspetos importantes, tais como as várias vantagens do seu uso como sistema de armazenamento de energia, diferentes tipos de aplicações, sua constituição (formas, tipos de matérias, máquina elétrica, entre outros) e são apresentados também os diferentes tipos de aplicações, utilizando‐a como sistema de armazenamento. A segunda fase é dedicada às equações fundamentais para o desenvolvimento duma flywheel. Neste caso são apresentadas várias equações para o cálculo da energia armazenada, momento de inércia, tensões, entre muitas outras equações essenciais. Na terceira fase é efetuada uma comparação entre diversos sistemas de armazenamento de energia, usando tanto a tecnologia flywheel como baterias tradicionais. Esta comparação foi realizada em três categorias, 150 kVA, 600 kVA e 1200 kVA. Em cada categoria é realizada uma comparação entre diversos fatores tais como: peso, custos, dimensões, limitações, regulações possíveis e questões ambientais. Como quarta fase, é apresentado um modelo de uma draga utilizando o sistema flywheel como armazenamento de energia. Neste modelo é apresentada a flywheel como solução, uma vez que armazena a energia recuperada dos processos eletromecânicos que necessitam de absorver grandes quantidades de energia. Desta forma, consegue‐se uma redução no consumo de energia. Os resultados da simulação mostram uma redução de 25% de energia e uma redução entre 80% a 90% em todas as categorias de emissões.

Toroid inductor development for a SIC DC-DC converter up to 150kW, based on finite element method

Dissertação para a obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Energia

A PV panel simulator based on a two quadrant DC/DC power converter with a sliding mode controller

The use of a solar photovoltaic (PV) panel simulator can be a valued tool for the design and evaluation of the several components of a photovoltaic system. This simulator is based on power electronic converter controlled in such a way that will behave as a PV panel. Thus, in this paper a PV panel simulator based on a two quadrant DC/DC power converter is proposed. This topology will allow to achieve fast responses, like suddenly changes in the irradiation and temperature. To control the power converter it will be used a fast and robust sliding mode controller. Therefore, with the proposed system I-V curve simulation of a PV panel is obtained. Experimental results from a laboratory prototype are presented in order to confirm the theoretical operation.

Conversor DC-DC com busca de ponto de potência máxima (MPPT) para painéis solares

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

Simulation of a-Si PV system linked to the grid by DC boost and three-level inverter under cloud scope

This paper is about a PV system linked to the electric grid through power converters under cloud scope. The PV system is modeled by the five parameters equivalent circuit and a MPPT procedure is integrated into the modeling. The modeling for the converters models the association of a DC-DC boost with a three-level inverter. PI controllers are used with PWM by sliding mode control associated with space vector modulation controlling the booster and the inverter. A case study addresses a simulation to assess the performance of a PV system linked to the electric grid. Conclusions regarding the integration of the PV system into the electric grid are presented. © IFIP International Federation for Information Processing 2015.

DC Fuzzy Multicriteria Approach to Increase the Probability of Delivering Power in Distribution Networks

This paper proposes a methodology to increase the probability of delivering power to any load point through the identification of new investments. The methodology uses a fuzzy set approach to model the uncertainty of outage parameters, load and generation. A DC fuzzy multicriteria optimization model considering the Pareto front and based on mixed integer non-linear optimization programming is developed in order to identify the adequate investments in distribution networks components which allow increasing the probability of delivering power to all customers in the distribution network at the minimum possible cost for the system operator, while minimizing the non supplied energy cost. To illustrate the application of the proposed methodology, the paper includes a case study which considers an 33 bus distribution network.

Increase of the Delivered Power Probability in Distribution Networks using Pareto DC Programming

A methodology to increase the probability of delivering power to any load point through the identification of new investments in distribution network components is proposed in this paper. The method minimizes the investment cost as well as the cost of energy not supplied in the network. A DC optimization model based on mixed integer non-linear programming is developed considering the Pareto front technique in order to identify the adequate investments in distribution networks components which allow increasing the probability of delivering power for any customer in the distribution system at the minimum possible cost for the system operator, while minimizing the energy not supplied cost. Thus, a multi-objective problem is formulated. To illustrate the application of the proposed methodology, the paper includes a case study which considers a 180 bus distribution network

Modelação e identificação de motor DC

O modelo matemático de um sistema real permite o conhecimento do seu comportamento dinâmico e é geralmente utilizado em problemas de engenharia. Por vezes os parâmetros utilizados pelo modelo são desconhecidos ou imprecisos. O envelhecimento e o desgaste do material são fatores a ter em conta pois podem causar alterações no comportamento do sistema real, podendo ser necessário efetuar uma nova estimação dos seus parâmetros. Para resolver este problema é utilizado o software desenvolvido pela empresa MathWorks, nomeadamente, o Matlab e o Simulink, em conjunto com a plataforma Arduíno cujo Hardware é open-source. A partir de dados obtidos do sistema real será aplicado um Ajuste de curvas (Curve Fitting) pelo Método dos Mínimos Quadrados de forma a aproximar o modelo simulado ao modelo do sistema real. O sistema desenvolvido permite a obtenção de novos valores dos parâmetros, de uma forma simples e eficaz, com vista a uma melhor aproximação do sistema real em estudo. A solução encontrada é validada com recurso a diferentes sinais de entrada aplicados ao sistema e os seus resultados comparados com os resultados do novo modelo obtido. O desempenho da solução encontrada é avaliado através do método das somas quadráticas dos erros entre resultados obtidos através de simulação e resultados obtidos experimentalmente do sistema real.

Projecto de um circuito conversor DC-DC para aplicações de “energy harvest”

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

Estudo e integração de business models e a sua aplicação em smart-ups e projetos portugueses

Dissertação apresentada ao Instituto Superior de Contabilidade e Administração do Porto para obtenção do Grau de Mestre em Gestão das Organizações, Ramo Gestão de Empresas Orientador: Professor Doutor Eduardo Manuel Lopes de Sá e Silva Co-orientador: Mestre Maria de Fátima Mendes Monteiro

Feasibility of Focal Transcranial DC Polarization with Simultaneous EEG Recording: Preliminary Assessment in Healthy Subjects and Human Epilepsy

We aimed to investigate the feasibility of an experimental system for simultaneous transcranial DC stimulation(tDCS) and EEG recording in human epilepsy. We report tolerability of this system in a cross-over controlled trial with 15 healthy subjects and preliminary effects of its use, testing repeated tDCS sessions, in two patients with drug-refractory Continuous Spike-Wave Discharges During Slow Sleep (CSWS). Our system combining continuous recording of the EEG with tDCS allows detailed evaluation of the interictal activity during the entire process. Stimulation with 1 mA was well‐tolerated in both healthy volunteers and patients with refractory epilepsy. The large reduction in interictal epileptiform EEG discharges in the two subjects with epilepsy supports further investigation of tDCS using this combined method of stimulation and monitoring in epilepsy. Continuous monitoring of epileptic activity throughout tDCS improves safety and allows detailed evaluation of epileptic activity changes induced by tDCS in patients.

Diagnosic Classification: Results from a Clinical Experience of Three Years with DC: 0–3

Infancy and early childhood are characterized by a dynamic and ever changing process. Since the beginning of their clinical work at the Infancy Unit, the authors were concerned with individual assessment and the questions about the role played by parents as well as by babies in pathology and intervention.In this article, the authors begin with a description of the path that led them to the selection of DC 0–3 as a diagnostic classification system and how this has been instrumental in helping them to better define infant psychopathology and guide them in treatment orientations. Next, they present the results of the applicationof Axis I and II of DC: 0–3 in their clinical population in the years 1997, 1998, and 1999. The objectives of this study were to learn more about the distribution of mental disorders in a clinical population up tofour years of age. The authors attempted to separate infants at risk for developing psychic disorders from those presenting current psychopathology as well as the possible influence of demographic features on this distribution, to define a target population and design adapted therapeutic measures. The identification of these objectives provides the rationale for the use of a diagnostic tool, like DC: 0–3, which is essential to plan clinical activity, to evaluate therapeutic efficacy, and to develop specific programs.

Armazenamento de sementes de ingazeira (Inga vera Subsp. affinis (DC.) T.D. Pennington).

O objetivo do trabalho foi estudar a germinação de semente de Inga vera subsp (Mimosaceae).

Analysis and implementation of a multi-ratio switched capacitor DC-DC converter for a supercapacitor power supply

An energy harvesting system requires an energy storing device to store the energy retrieved from the surrounding environment. This can either be a rechargeable battery or a supercapcitor. Due to the limited lifetime of rechargeable batteries, they need to be periodically replaced. Therefore, a supercapacitor, which has ideally a limitless number of charge/discharge cycles can be used to store the energy; however, a voltage regulator is required to obtain a constant output voltage as the supercapacitor discharges. This can be implemented by a Switched-Capacitor DC-DC converter which allows a complete integration in CMOS technology, although it requires several topologies in order to obtain a high efficiency. This thesis presents the complete analysis of four different topologies in order to determine expressions that allow to design and determine the optimum input voltage ranges for each topology. To better understand the parasitic effects, the implementation of the capacitors and the non-ideal effect of the switches, in 130 nm technology, were carefully studied. With these two analysis a multi-ratio SC DC-DC converter was designed with an output power of 2 mW, maximum efficiency of 77%, and a maximum output ripple, in the steady state, of 23 mV; for an input voltage swing of 2.3 V to 0.85 V. This proposed converter has four operation states that perform the conversion ratios of 1/2, 2/3, 1/1 and 3/2 and its clock frequency is automatically adjusted to produce a stable output voltage of 1 V. These features are implemented through two distinct controller circuits that use asynchronous time machines (ASM) to dynamically adjust the clock frequency and to select the active state of the converter. All the theoretical expressions as well as the behaviour of the whole system was verified using electrical simulations.