918 resultados para Cure rate models


Relevância:

80.00% 80.00%

Publicador:

Resumo:

Monochloroacetic acid crystals and 60% salicylic acid ointment was found to be more effective than placebo as a treatment for simple plantar warts in a double blind study on 57 patients. Nineteen (66%) patients in the active treatment group compared with five (18%) patients in the placebo group were cured after 6 weeks (P = 0.002). The active treatment was associated with a significantly higher cure rate 6 months after entry (P = 0.04). Treatments were well tolerated. IgG or IgM antibodies or both to human papilloma virus (HPV) types 1 or 2 or both were detected significantly more frequently in the actively treated group 6 weeks after entry (P = 0.0005). Twelve (50%) patients considered to be cured had no detectable secondary immune response. Our results suggest that cure does not depend primarily on the humoral system but rather on mechanical destruction of wart tissue, or occurs as a result of cell mediated immunity.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Although recent decades have seen an improved cure rate for newly diagnosed paediatric acute lymphoplastic leukaemia (ALL), the treatment options for adult ALL, T-cell ALL (T-ALL) and relapsed disease remain poor. We have developed a novel series of pyrrolo-1,5-benzoxazepine (PBOX) compounds and established their anticancer efficacy in a variety of human tumour cell types. Here, we demonstrate that PBOX-15 inhibits cell growth, and induces G2/M cell cycle arrest and apoptosis in both T-ALL and B-cell ALL (B-ALL) cells. In addition, prior to PBOX-15-induced apoptosis, PBOX-15 decreases ALL cell adhesion, spreading and migration. Concurrently, PBOX-15 differentially down-regulates β1-, β2- and α4-integrin expression in ALL cells and significantly decreases integrin-mediated cell attachment. PBOX-15 interferes with the lateral mobility and clustering of integrins in both B-ALL and T-ALL cells. These data suggest that PBOX-15 is not only effective in inducing apoptosis in ALL cells, but also has the potential to disrupt integrin-mediated adhesion of malignant lymphocytes, which represents a novel avenue for regulating leukaemic cell homing and migration.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

BACKGROUND: Acute promyelocytic leukaemia is a chemotherapy-sensitive subgroup of acute myeloid leukaemia characterised by the presence of the PML-RARA fusion transcript. The present standard of care, chemotherapy and all-trans retinoic acid (ATRA), results in a high proportion of patients being cured. In this study, we compare a chemotherapy-free ATRA and arsenic trioxide treatment regimen with the standard chemotherapy-based regimen (ATRA and idarubicin) in both high-risk and low-risk patients with acute promyelocytic leukaemia.

METHODS: In the randomised, controlled, multicentre, AML17 trial, eligible patients (aged ≥16 years) with acute promyelocytic leukaemia, confirmed by the presence of the PML-RARA transcript and without significant cardiac or pulmonary comorbidities or active malignancy, and who were not pregnant or breastfeeding, were enrolled from 81 UK hospitals and randomised 1:1 to receive treatment with ATRA and arsenic trioxide or ATRA and idarubicin. ATRA was given to participants in both groups in a daily divided oral dose of 45 mg/m(2) until remission, or until day 60, and then in a 2 weeks on-2 weeks off schedule. In the ATRA and idarubicin group, idarubicin was given intravenously at 12 mg/m(2) on days 2, 4, 6, and 8 of course 1, and then at 5 mg/m(2) on days 1-4 of course 2; mitoxantrone at 10 mg/m(2) on days 1-4 of course 3, and idarubicin at 12 mg/m(2) on day 1 of the final (fourth) course. In the ATRA and arsenic trioxide group, arsenic trioxide was given intravenously at 0·3 mg/kg on days 1-5 of each course, and at 0·25 mg/kg twice weekly in weeks 2-8 of course 1 and weeks 2-4 of courses 2-5. High-risk patients (those presenting with a white blood cell count >10 × 10(9) cells per L) could receive an initial dose of the immunoconjugate gemtuzumab ozogamicin (6 mg/m(2) intravenously). Neither maintenance treatment nor CNS prophylaxis was given to patients in either group. All patients were monitored by real-time quantitative PCR. Allocation was by central computer minimisation, stratified by age, performance status, and de-novo versus secondary disease. The primary endpoint was quality of life on the European Organisation for Research and Treatment of Cancer (EORTC) QLQ-C30 global health status. All analyses are by intention to treat. This trial is registered with the ISRCTN registry, number ISRCTN55675535.

FINDINGS: Between May 8, 2009, and Oct 3, 2013, 235 patients were enrolled and randomly assigned to ATRA and idarubicin (n=119) or ATRA and arsenic trioxide (n=116). Participants had a median age of 47 years (range 16-77; IQR 33-58) and included 57 high-risk patients. Quality of life did not differ significantly between the treatment groups (EORTC QLQ-C30 global functioning effect size 2·17 [95% CI -2·79 to 7·12; p=0·39]). Overall, 57 patients in the ATRA and idarubicin group and 40 patients in the ATRA and arsenic trioxide group reported grade 3-4 toxicities. After course 1 of treatment, grade 3-4 alopecia was reported in 23 (23%) of 98 patients in the ATRA and idarubicin group versus 5 (5%) of 95 in the ATRA and arsenic trioxide group, raised liver alanine transaminase in 11 (10%) of 108 versus 27 (25%) of 109, oral toxicity in 22 (19%) of 115 versus one (1%) of 109. After course 2 of treatment, grade 3-4 alopecia was reported in 25 (28%) of 89 patients in the ATRA and idarubicin group versus 2 (3%) of 77 in the ATRA and arsenic trioxide group; no other toxicities reached the 10% level. Patients in the ATRA and arsenic trioxide group had significantly less requirement for most aspects of supportive care than did those in the ATRA and idarubicin group.

INTERPRETATION: ATRA and arsenic trioxide is a feasible treatment in low-risk and high-risk patients with acute promyelocytic leukaemia, with a high cure rate and less relapse than, and survival not different to, ATRA and idarubicin, with a low incidence of liver toxicity. However, no improvement in quality of life was seen.


Relevância:

80.00% 80.00%

Publicador:

Resumo:

Introdução: Os exercícios de fortalecimento dos músculos do pavimento pélvico (EFMPP) são considerados a primeira intervenção no tratamento da incontinência urinária de esforço (IUE), porém os EFMPP são distintos, não existindo evidência sobre os parâmetros de treino. Objetivo: Identificar o protocolo e/ ou os parâmetros de treino dos músculos do pavimento pélvico (MPP) mais eficaz no tratamento da IUE feminina. Método: A pesquisa bibliográfica foi realizada entre janeiro de 1992 a março de 2014 nas bases de dados PubMed, Cochrane Library, PEDro, web of Science e LILACS. Os artigos incluídos eram de língua inglesa, estudos experimentais, no qual comparavam EFMPP com o tratamento placebo, usual ou sem tratamento, com idade compreendida entre os 18 e os 65 anos e diagnóstico de IUE. Os critérios de exclusão abrangeram o diagnóstico de IUE desencadeada por fatores externos ao trato urinário inferior, grávidas, puérperas, prolapso ≥ 2 e outros tipos de IU. A avaliação da qualidade metodológica for realizada através da escala PEDro. Resultados: Sete artigos de elevada qualidade metodológica foram incluídos na presente revisão. A amostra foi constituída por 331 mulheres, com idade média de 44,4 anos, duração média das perdas urinárias de 64 meses e a gravidade da IUE variou entre ligeira a severa. Os programas de EFMPP eram distintos em relação aos parâmetros de treino dos MPP, sendo que alguns estudos incluíram o treino abdominal, supervisão e técnicas adjuvantes. A taxa de curada da quantidade de perda urinária variou entre 28,6 a 80%, enquanto a força dos MPP variou de 15,6% a 161,7%. Conclusão: Na presente revisão sistemática, os EFMPP combinados com palpação digital, biofeedback e cones vaginais parecem ser mais eficazes na redução da quantidade de perda urinária, comparado com os EFMPP isolados ou sem tratamento. Esta revisão permitiu igualmente identificar as 12 semanas de duração da intervenção, 10 repetições por série e diferentes posições, sendo os parâmetros de treino mais consistentes na redução dos sintomas.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Aujourd'hui, les problèmes des maladies infectieuses concernent l'émergence d'infections difficiles à traiter, telles que les infections associées aux implants et les infections fongiques invasives chez les patients immunodéprimés. L'objectif de cette thèse était de développer des stratégies pour l'éradication des biofilms bactériens (partie 1), ainsi que d'étudier des méthodes innovantes pour la détection microbienne, pour l'établissement de nouveaux tests de sensibilité (partie 2). Le traitement des infections associées aux implants est difficile car les biofilms bactériens peuvent résister à des niveaux élevés d'antibiotiques. A ce jour, il n'y a pas de traitement optimal défini contre des infections causées par des bactéries de prévalence moindre telles que Enterococcus faecalis ou Propionibacterium acnés. Dans un premier temps, nous avons démontré une excellente activité in vitro de la gentamicine sur une souche de E. faecalis en phase stationnaire de croissance Nous avons ensuite confirmé l'activité de la gentamicine sur un biofilm précoce en modèle expérimental animal à corps étranger avec un taux de guérison de 50%. De plus, les courbes de bactéricidie ainsi que les résultats de calorimétrie ont prouvé que l'ajout de gentamicine améliorait l'activité in vitro de la daptomycine, ainsi que celle de la vancomycine. In vivo, le schéma thérapeutique le plus efficace était l'association daptomycine/gentamicine avec un taux de guérison de 55%. En établissant une nouvelle méthode pour l'évaluation de l'activité des antimicrobiens vis-à-vis de micro-organismes en biofilm, nous avons démontré que le meilleur antibiotique actif sur les biofilms à P. acnés était la rifampicine, suivi par la penicilline G, la daptomycine et la ceftriaxone. Les études conduites en modèle expérimental animal ont confirmé l'activité de la rifampicine seule avec un taux de guérison 36%. Le meilleur schéma thérapeutique était au final l'association rifampicine/daptomycine avec un taux de guérison 63%. Les associations de rifampicine avec la vancomycine ou la levofloxacine présentaient des taux de guérisons respectivement de 46% et 25%. Nous avons ensuite étudié l'émergence in vitro de la résistance à la rifampicine chez P. acnés. Nous avons observé un taux de mutations de 10"9. La caractérisation moléculaire de la résistance chez les mutant-résistants a mis en évidence l'implication de 5 mutations ponctuelles dans les domaines I et II du gène rpoB. Ce type de mutations a déjà été décrit au préalable chez d'autres espèces bactériennes, corroborant ainsi la validité de nos résultats. La deuxième partie de cette thèse décrit une nouvelle méthode d'évaluation de l'efficacité des antifongiques basée sur des mesures de microcalorimétrie isotherme. En utilisant un microcalorimètre, la chaleur produite par la croissance microbienne peut être-mesurée en temps réel, très précisément. Nous avons évalué l'activité de l'amphotéricine B, des triazolés et des échinocandines sur différentes souches de Aspergillus spp. par microcalorimétrie. La présence d'amphotéricine Β ou de triazole retardait la production de chaleur de manière concentration-dépendante. En revanche, pour les échinochandines, seule une diminution le pic de « flux de chaleur » a été observé. La concordance entre la concentration minimale inhibitrice de chaleur (CMIC) et la CMI ou CEM (définie par CLSI M38A), avec une marge de 2 dilutions, était de 90% pour l'amphotéricine B, 100% pour le voriconazole, 90% pour le pozoconazole et 70% pour la caspofongine. La méthode a été utilisée pour définir la sensibilité aux antifongiques pour d'autres types de champignons filamenteux. Par détermination microcalorimétrique, l'amphotéricine B s'est avéré être l'agent le plus actif contre les Mucorales et les Fusarium spp.. et le voriconazole le plus actif contre les Scedosporium spp. Finalement, nous avons évalué l'activité d'associations d'antifongiques vis-à-vis de Aspergillus spp. Une meilleure activité antifongique était retrouvée avec l'amphotéricine B ou le voriconazole lorsque ces derniers étaient associés aux échinocandines vis-à-vis de A. fumigatus. L'association échinocandine/amphotéricine B a démontré une activité antifongique synergique vis-à-vis de A. terreus, contrairement à l'association échinocandine/voriconazole qui ne démontrait aucune amélioration significative de l'activité antifongique. - The diagnosis and treatment of infectious diseases are today increasingly challenged by the emergence of difficult-to-manage situations, such as infections associated with medical devices and invasive fungal infections, especially in immunocompromised patients. The aim of this thesis was to address these challenges by developing new strategies for eradication of biofilms of difficult-to-treat microorganisms (treatment, part 1) and investigating innovative methods for microbial detection and antimicrobial susceptibility testing (diagnosis, part 2). The first part of the thesis investigates antimicrobial treatment strategies for infections caused by two less investigated microorganisms, Enterococcus faecalis and Propionibacterium acnes, which are important pathogens causing implant-associated infections. The treatment of implant-associated infections is difficult in general due to reduced susceptibility of bacteria when present in biofilms. We demonstrated an excellent in vitro activity of gentamicin against E. faecalis in stationary growth- phase and were able to confirm the activity against "young" biofilms (3 hours) in an experimental foreign-body infection model (cure rate 50%). The addition of gentamicin improved the activity of daptomycin and vancomycin in vitro, as determined by time-kill curves and microcalorimetry. In vivo, the most efficient combination regimen was daptomycin plus gentamicin (cure rate 55%). Despite a short duration of infection, the cure rates were low, highlighting that enterococcal biofilms remain difficult to treat despite administration of newer antibiotics, such as daptomycin. By establishing a novel in vitro assay for evaluation of anti-biofilm activity (microcalorimetry), we demonstrated that rifampin was the most active antimicrobial against P. acnes biofilms, followed by penicillin G, daptomycin and ceftriaxone. In animal studies we confirmed the anti-biofilm activity of rifampin (cure rate 36% when administered alone), as well as in combination with daptomycin (cure rate 63%), whereas in combination with vancomycin or levofloxacin it showed lower cure rates (46% and 25%, respectively). We further investigated the emergence of rifampin resistance in P. acnes in vitro. Rifampin resistance progressively emerged during exposure to rifampin, if the bacterial concentration was high (108 cfu/ml) with a mutation rate of 10"9. In resistant isolates, five point mutations of the rpoB gene were found in cluster I and II, as previously described for staphylococci and other bacterial species. The second part of the thesis describes a novel real-time method for evaluation of antifungals against molds, based on measurements of the growth-related heat production by isothermal microcalorimetry. Current methods for evaluation of antifungal agents against molds, have several limitations, especially when combinations of antifungals are investigated. We evaluated the activity of amphotericin B, triazoles (voriconazole, posaconazole) and echinocandins (caspofungin and anidulafungin) against Aspergillus spp. by microcalorimetry. The presence of amphotericin Β or a triazole delayed the heat production in a concentration-dependent manner and the minimal heat inhibition concentration (MHIC) was determined as the lowest concentration inhibiting 50% of the heat produced at 48 h. Due to the different mechanism of action echinocandins, the MHIC for this antifungal class was determined as the lowest concentration lowering the heat-flow peak with 50%. Agreement within two 2-fold dilutions between MHIC and MIC or MEC (determined by CLSI M38A) was 90% for amphotericin B, 100% for voriconazole, 90% for posaconazole and 70% for caspofungin. We further evaluated our assay for antifungal susceptibility testing of non-Aspergillus molds. As determined by microcalorimetry, amphotericin Β was the most active agent against Mucorales and Fusarium spp., whereas voriconazole was the most active agent against Scedosporium spp. Finally, we evaluated the activity of antifungal combinations against Aspergillus spp. Against A. jumigatus, an improved activity of amphotericin Β and voriconazole was observed when combined with an echinocandin. Against A. terreus, an echinocandin showed a synergistic activity with amphotericin B, whereas in combination with voriconazole, no considerable improved activity was observed.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Peu d’études ont exploré l’utilisation du traitement prolongé pour les mammites cliniques et aucune ne portait sur l’utilisation du traitement prolongé à base de ceftiofur pour le traitement des mammites cliniques légères à modérées. L’objectif de cette étude était d’évaluer l’efficacité du traitement intra-mammaire prolongé à base de ceftiofur pour les mammites cliniques légères à modérées, en considérant toutes les bactéries responsables ou seulement Staphylococcus aureus (S. aureus) et les streptocoques. Des vaches laitières (n = 241) de 22 élevages du Québec et de l’Ontario ont été inclues. L’étude a été conçue comme un essai clinique à allocation aléatoire. Pour chaque cas de mammite clinique légère à modérée, 125 mg d’hydrochloride de ceftiofur (Spectramast® LC) a été administré par voie intra-mammaire une fois par jour pour 2 ou 8 jours. Le pourcentage de guérison clinique 21 jours après la fin du traitement était de 89% (n = 98/110 pour chaque groupe, p = 0,95). Les pourcentages de guérison bactériologique 21 jours après la fin du traitement pour les groupes 2 jours et 8 jours étaient 32% (n = 15/47) et 61% (n = 25/41) respectivement pour toutes les bactéries (p < 0,01); 64% (n = 9/14) et 82% (n = 9/11) respectivement pour les streptocoques (p = 0,50); et 0% (n = 0/20) et 47% (n = 9/19) pour S. aureus (p < 0,01). Il n'y avait pas de différence entre les 2 groupes pour les nouvelles infections intra-mammaires (p = 0,30). Le traitement prolongé à base de ceftiofur est un choix raisonnable pour le traitement des mammites cliniques légères à modérées, en particulier causées par S. aureus.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

La leucémie lymphoblastique aiguë (LLA) est responsable d’environ 25% de l’ensemble des cancers pédiatriques. Chez 85% des enfants diagnostiqués, la LLA entraîne une prolifération massive et incontrôlée de lymphocytes immatures de type précurseurs B dans la moelle osseuse (LLA pré-B). Des avancées intéressantes ont été faites au cours des trente dernières années et ont mené à une augmentation de l’efficacité des traitements thérapeutiques. Plus de 80% des enfants atteints de LLA seront guéris de cette maladie. Malheureusement, ces traitements manquent de spécificité à cause du manque de connaissances sur les mécanismes moléculaires impliqués durant l’initiation et le développement de la LLA pré-B pédiatrique. En d’autres termes, nous connaissons peu de chose sur l’étiologie de cette maladie. Plus de 25% des enfants atteints de la LLA pré-B présentent la translocation chromosomique t(12;21)(p13;q22) qui implique les gènes ETV6 et AML1. Celle-ci est formée in utero et mène à l’expression de la protéine chimère transcriptionnelle ETV6-AML1, dont la présence seule ne suffit pas au développement de la LLA pré-B. Ainsi, d’autres événements génétiques sont nécessaires au développement de cette leucémie. La délétion de l’allèle résiduel de ETV6 est un événement génétique fréquemment rencontré au moment du diagnostic de la LLA pré-B t(12;21)+. Cette délétion entraîne l’inactivation complète de ETV6 dans les lymphocytes pré-B leucémiques. ETV6 est un répresseur transcriptionnel de la famille Ets. Mon hypothèse de recherche est que ETV6 agit comme gène suppresseur de tumeur dans la LLA pré-B pédiatrique. L’inactivation de ETV6 causerait une dérégulation de l’expression de ses cibles transcriptionnelles et, par le fait même, favoriserait l’initiation et le déroulement de la leucémogenèse pédiatrique. Dans le cadre de mon projet, comme peu de cibles transcriptionnelles de ETV6 sont connues, j’ai effectué des expériences d’immunoprécipitation de la chromatine et des essais luciférases qui ont permis d’identifier six nouvelles cibles transcriptionnelles: TP53 (p53 et Δ133p53), SPHK1, IL-18, PTGER4 et LUM. J’ai démontré que la régulation transcriptionnelle médiée par ETV6 requiert la présence de ses deux domaines fonctionnels: PNT (interactions protéiques) et ETS (liaison à l’ADN). Ces domaines favorisent la reconnaissance d’un site EBS consensus dans une région située près du promoteur de base. Ce mécanisme peut dépendre du promoteur régulé par ETV6, mais également du contexte cellulaire. Des études fonctionnelles réalisées sur des lymphocytes pré-B leucémiques ont permis de mesurer l’impact de la dérégulation de l’expression des cibles transcriptionnelles de ETV6 sur trois voies biologiques: la prolifération cellulaire, l’apoptose induite par un stress génotoxique et la migration cellulaire dirigée par la voie de signalisation CXCL12/CXCR4. Ceci a permis de démontrer l’implication des gènes SPHK1, IL-18 et PTGER4 durant la leucémogenèse pédiatrique. Cette étude est une des premières à suggérer le rôle de ETV6 comme gène suppresseur de tumeur dans la LLA pré-B pédiatrique. Suite à l’inactivation du répresseur transcriptionnel ETV6, l’augmentation de l’expression de ses cibles transcriptionnelles favoriserait la prolifération et la survie des lymphocytes pré-B leucémiques dans la moelle osseuse. L’identification de nouveaux gènes impliqués dans le développement de la LLA pré-B pédiatrique ouvre la porte au développement de nouveaux traitements thérapeutiques qui pourront présenter une meilleure spécificité envers l’étiologie de la maladie.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Zinc salts of ethyl, isopropyl, and butyl xanthates were prepared in the laboratory. The effect of these xanthates in combination with zinc diethyldithiocarbamate (ZDC) on the vulcanization of silica-filled NBR compounds has been studied at different temperatures. The cure times of these compounds were compared with that of NBR compounds containing tetramethylthiuram disulphide/dibenzthiazyl disulphide. The rubber compounds with the xanthates and ZDC were cured at various temperatures from 60 to 150°C. The sheets were molded and properties such as tensile strength, tear strength, crosslink density, elongation at break, compression set, abrasion resistance, flex resistance, heat buildup, etc. were evaluated. The properties showed that zinc salt of xanthate/ZDC combination has a positive synergistic effect on the cure rate and mechanical properties of NBR compounds.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Zinc salts of ethyl, isopropyl, and butyl xanthates are prepared in the laboratory, and the effect of these xanthates with zinc diethyl dithiocarbamate (ZDC) on the vulcanization of HAF-filled nitrile butadiene rubber (NBR) compounds has been studied at different temperatures. The cure times of these compounds have been compared with that of NBR compounds containing TMTD/MBTS. The rubber compounds with the three xanthate accelerators and ZDC are cured at various temperatures from 60 to 150°C. The sheets are molded and properties such as tensile strength, tear strength, cross-link density, elongation at break, compression set, abrasion resistance, flex resistance, etc. have been evaluated. The properties show that zinc salt of the xanthate/ZDC accelerator system has a positive synergistic effect on the cure rate and mechanical properties of NBR compounds.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

ABSTRACT: Linseed oil is used in the dual roles of the plasticizer and the fatty acid component of the activator in nitrile rubber vulcanizates. The study shows that the substitution can substantially improve the mechanical properties in addition to other advantages such as increased cure rate, reduced leachability and reduced compound cost.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Blends of Acrylonitrile rubber with Maleic anhydride grafted Whole Tyre Reclaim WTR (MA-g-WTR) have been prepared and the cure and mechanical properties have been studied with respect to reclaim content. Control compounds containing unmodified WTR were also prepared for comparison. Grafting was confirmed by IR studies. Blends containing grafted WTR showed higher minimum torque and (max-min) torque. They also showed longer cure time, scorch time and lower cure rate. Grafting of the WTR with maleic anhydride also resulted in the improved tensile strength, abrasion resistance, compression set and resilience. However, the heat build up under dynamic loading was marginally higher for the blends containing grafted reclaimed rubber.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Cure characteristics and mechanical properties of acrylonitrile butadiene rubber/reclaimed rubber blends were studied. Minimum torque, (ma)dmum -minimum) torque, scorch time, cure time and cure rate decreased in presence of reclaimed rul3ber. Tensile strength, elongation at break and compression set increased'with increase in reclaim content. Resilience and abrasion resistance decreased with reclaim loading. Heat build up was higher for the blends. The ageing resistance of the blends was inferior to that of the gum compound.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Cure characteristics and mechanical properties of styrene butadiene rubber reclaimed rubber blends were studied. The blends showed improved processability, as indicated by the minimum torque values. Cure characteristics like minimum torque, (maximum-minimum) torque, cure time and cure rate decreased in the presence of reclaimed rubber. Tensile strength, tear strength, elongation at break were higher for blends. Resilience decreased with reclaim content. Compression set and abrasion loss were higher in the blends.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Nanoscale silica was synthesized by precipitation method using sodium silicate and dilute hydrochloric acid under controlled conditions. The synthesized silica was characterized by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), BET adsorption and X-Ray Diffraction (XRD). The particle size of silica was calculated to be 13 nm from the XRD results and the surface area was found to be 295 m2/g by BET method. The performance of this synthesized nanosilica as a reinforcing filler in natural rubber (NR) compound was investigated. The commercial silica was used as the reference material. Nanosilica was found to be effective reinforcing filler in natural rubber compound. Filler-matrix interaction was better for nanosilica than the commercial silica. The synthesized nanosilica was used in place of conventional silica in HRH (hexamethylene tetramine, resorcinol and silica) bonding system for natural rubber and styrene butadiene rubber / Nylon 6 short fiber composites. The efficiency of HRH bonding system based on nanosilica was better. Nanosilica was also used as reinforcing filler in rubber / Nylon 6 short fiber hybrid composite. The cure, mechanical, ageing, thermal and dynamic mechanical properties of nanosilica / Nylon 6 short fiber / elastomeric hybrid composites were studied in detail. The matrices used were natural rubber (NR), nitrile rubber (NBR), styrene butadiene rubber (SBR) and chloroprene rubber (CR). Fiber loading was varied from 0 to 30 parts per hundred rubber (phr) and silica loading was varied from 0 to 9 phr. Hexa:Resorcinol:Silica (HRH) ratio was maintained as 2:2:1. HRH loading was adjusted to 16% of the fiber loading. Minimum torque, maximum torque and cure time increased with silica loading. Cure rate increased with fiber loading and decreased with silica content. The hybrid composites showed improved mechanical properties in the presence of nanosilica. Tensile strength showed a dip at 10 phr fiber loading in the case of NR and CR while it continuously increased with fiber loading in the case of NBR and SBR. The nanosilica improved the tensile strength, modulus and tear strength better than the conventional silica. Abrasion resistance and hardness were also better for the nanosilica composites. Resilience and compression set were adversely affected. Hybrid composites showed anisotropy in mechanical properties. Retention in ageing improved with fiber loading and was better for nanosilica-filled hybrid composites. The nanosilica also improved the thermal stability of the hybrid composite better than the commercial silica. All the composites underwent two-step thermal degradation. Kinetic studies showed that the degradation of all the elastomeric composites followed a first-order reaction. Dynamic mechanical analysis revealed that storage modulus (E’) and loss modulus (E”) increased with nanosiica content, fiber loading and frequency for all the composites, independent of the matrix. The highest rate of increase was registered for NBR rubber.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Attempts have been made to attain satisfactory network structures in each of the phases of a rubber blend by minimising the cure rate imbalance by employing methods such as grafting of accelerators to the slow curing rubber, chemically bonding the crosslinking agents to the rubber in which it has lower solubility, functionalisation of the slow curing rubber, masterbatching of the curing agents to the slow curing rubber etc. Functionalisation of the slow curing constituents of NR/IIR and NR/EIPDM blends is tried using novel reagents as the first part of this study. However, the crux of the present study is a more direct approach to attaining a covulcanized state in NR/IIR and NR/EPDM blends: Precuring the slow curing rubber (IIR or EPDM) to a low level when it can still blend with NR and then to ck) the final curing after blending with NR. TNM3 precuring is also likely to minimise the viscosity mismatch. Since a low level of resmmal crosslink density is likely to be present lJ1 reclaimed rubbers, blending heat resistant reclaimed rubber such as butyl reclaim with NR may also have the same effect of precuring IIR, and then blending with NR. Hence use of IIR reclaim for developing blends with NR is also proposed to be investigated in this study