Pulsatile flow of a viscous fluid in elliptical pipe of variable cross-section

The pulsatile flow of an incompressible viscous fluid in an elliptical pipe of slowly varying cross-section is considered. Asymptotic series solutions for the velocity distribution and pressure gradient are obtained in terms of Mathieu functions for a low Reynold number flow in which the volume flux is prescribed. An expression for shear stress on the boundary is derived. The physically significant quantities governing the flow are computed numerically and analysed for different types of constrictions. The effect of eccentricity and Womerslay parameter on the flow is discussed.

Free convection about cylinders of elliptic cross section embedded in a porous medium

Numerical solutions are presented for the free convection boundary layers over cylinders of elliptic cross section embedded in a fluid-saturated porous medium. The transformed conservation equations of the nonsimilar boundary layers are solved numerically by an efficient finite-difference method. The theory was applied to a number of cylinders and the results compared very well with published analytical solutions. The results are of use in the design of underground electrical cables, power plant steam, and water distribution lines, among others.

Peristaltic transport of a biofluid in a pipe of elliptic cross section

Peristaltic transport of two fluids occupying the peripheral layer and the core in an elliptic tube is, investigated in elliptic cylindrical co-ordinate system, under long wavelength and low Reynolds number approximations. The effect of peripheral-layer viscosity on the flow rate and the frictional force for a slightly elliptic tube is discussed. The limiting results for the one-fluid model are obtained for different eccentricities of the undisturbed tube cross sections with the same area. As a result of non-uniformity of the peristaltic wave, two different amplitude ratios are defined and the time-averaged flux and mechanical efficiency are studied for different eccentricities. It is observed that the time-averaged flux is not affected significantly by the pressure drop when the eccentricity is large. For the peristaltic waves with same area variation, the pumping seems to improve with the eccentricity.

Sensitivity Enhancement in Solid-State Separated Local Field NMR Experiments by the Use of Adiabatic Cross-Polarization

Measurement of dipolar couplings using separated local field (SLF) NMR experiment is a powerful tool for structural and dynamics studies of oriented molecules such as liquid crystals and membrane proteins in aligned lipid bilayers. Enhancing the sensitivity of such SLF techniques is of significant importance in present-day solid-state NMR methodology. The present study considers the use of adiabatic cross-polarization for this purpose, which is applied for the first time to one of the well-known SLF techniques, namely, polarization inversion spin exchange at the magic angle (PISEMA). The experiments have been carried out on a single crystal of a model peptide, and a dramatic enhancement in signal-to-noise up to 90% has been demonstrated.

Effects of different modes of hot cross-rolling in 7010 aluminum alloy: part I. evolution of microstructure and texture

The current study describes the evolution of microstructure and texture in an Al-Zn-Mg-Cu-Zr-based 7010 aluminum alloy during different modes of hot cross-rolling. Processing of materials involves three different types of cross-rolling. The development of texture in the one-step cross-rolled specimen can be described by a typical beta-fiber having the maximum intensity near Copper (Cu) component. However, for the multi-step cross-rolled specimens, the as-rolled texture is mainly characterized by a strong rotated-Brass (Bs) component and a very weak rotated-cube component. Subsequent heat treatment leads to sharpening of the major texture component (i.e., rotated-Bs). Furthermore, the main texture components in all the specimens appear to be significantly rotated in a complex manner away from their ideal positions because of non-symmetric deformations in the two rolling directions. Detailed microstructural study indicates that dynamic recovery is the dominant restoration mechanism operating during the hot rolling. During subsequent heat treatment, static recovery dominates, while a combination of particle-stimulated nucleation (PSN) and strain-induced grain boundary migration (SIBM) causes partial recrystallization of the grain structure. The aforementioned restoration mechanisms play an important role in the development of texture components. The textural development in the current study could be attributed to the combined effects of (a) cross-rolling and inter-pass annealing that reduce the intensity of Cu component after each successive pass, (b) recrystallization resistance of Bs-oriented grains, (c) stability of Bs texture under cross-rolling, and (d) Zener pinning by Al3Zr dispersoids.

Effects of different modes of hot cross-rolling in 7010 aluminum alloy: part II. mechanical properties anisotropy

The influence of microstructure and texture developed by different modes of hot cross-rolling on in-plane anisotropy (A (IP)) of yield strength, work hardening behavior, and anisotropy of Knoop hardness (KHN) yield locus has been investigated. The A (IP) and work hardening behavior are evaluated by tensile testing at 0 deg, 45 deg, and 90 deg to the rolling direction, while yield loci have been generated by directional KHN measurements. It has been observed that specimens especially in the peak-aged temper, in spite of having a strong, rotated Brass texture, show low A (IP). The results are discussed on the basis of Schmid factor analyses in conjunction with microstructural features, namely grain morphology and precipitation effects. For the specimen having a single-component texture, the yield strength variation as a function of orientation can be rationalized by the Schmid factor analysis of a perfectly textured material behaving as a quasi-single crystal. The work hardening behavior is significantly affected by the presence of solute in the matrix and the state of precipitation rather than texture, while yield loci derived from KHN measurements reiterate the low anisotropy of the materials. Theoretic yield loci calculated from the texture data using the visco-plastic self-consistent model and Hill's anisotropic equation are compared with that obtained experimentally.

Tensile flow and work hardening behavior of hot cross-rolled AA7010 aluminum alloy sheets

The present work describes the tensile flow and work hardening behavior of a high strength 7010 aluminum alloy by constitutive relations. The alloy has been hot rolled by three different cross-rolling schedules. Room temperature tensile properties have been evaluated as a function of tensile axis orientation in the as-hot rolled as well as peak aged conditions. It is found that both the Ludwigson and a generalized Voce-Bergstrom relation adequately describe the tensile flow behavior of the present alloy in all conditions compared to the Hollomon relation. The variation in the Ludwigson fitting parameter could be correlated well with the microstructural features and anisotropic contribution of strengthening precipitates in the as-rolled and peak aged conditions, respectively. The hardening rate and the saturation stress of the first Voce-Bergstrom parameter, on the other hand, depend mainly on the crystallographic texture of the specimens. It is further shown that for the peak aged specimens the uniform elongation (epsilon(u)) derived from the Ludwigson relation matches well with the measured epsilon(u) irrespective of processing and loading directions. However, the Ludwigson fit overestimates the epsilon(u) in case of the as-rolled specimens. The Hollomon fit, on the other hand, predicts well the measured epsilon(u), of the as-rolled specimens but severely underestimates the epsilon(u), for the peak aged specimens. Contrarily, both the relations significantly overestimate the UTS of the as-rolled and the peak aged specimens. The Voce-Bergstrom parameters define the slope of e Theta-sigma plots in the stage-III regime when the specimens show a classical linear decrease in hardening rate in stage-III. Further analysis of work hardening behavior throws some light on the effect of texture on the dislocation storage and dynamic recovery.

A synopsis of the traditional fishing gears used in artisanal fisheries along the upper part of the Cross River

Artisanal fishery is the main type of fishing practised occupationally by the fishermen along the upper sectors of the Cross River. No form of mechanised fishing has so far been introduced to the fishermen in these areas. This study has attempted to find out the different gears used, when and where used along the main river channel, its tributaries and flood plains. An effort has also been made to provide some information on the types of fishes caught with the different gears. Recommendation for effective management are also advanced

A review of bonga fisheries of the Cross River State, Nigeria

The Nigerian pelagic fishery contributes about two-thirds of the total marine fishery resources of the country. The main components of this fishery are the clupeid (Ethmalosa, and Sardinella spp) and the scombroid (jacks, barracuda and tuna) fisheries. In 1979 to 1983, fish production from the national inshore and brackishwater zones was 1,702,685 tonnes. Bonga (Ethmalosa fimbriata) which dominates the pelagic fishery in the Cross River State of Nigeria, contributed about 158,612 tonnes (i.e. 9.3%) of this national marine fish catch. Although bonga is caught along the entire Nigerian coast, a significant fishery exists mostly in the wider estuary of the Cross River State, which borders on the Cameroon Republic. In the Cross River State, and within the period, bonga contributed 24% to the marine fish landings. Bonga is supported by a single species (E. fimbriata). The species forms an important fishery all the year-round in the open sea off these estuaries, whenever the canoes venture to sea, but these open sea fisheries are affected by whether conditions. The best, and most suitable gear for bonga are the gill nets, cast nets, boat seines, and shore seines. Dried and smoked bonga are a common market commodity in the southern parts of the country generally, but particularly in the Cross State where it is a readily available and acceptable food item

An evaluation of the artisanal fisheries resources of the Cross River State of Nigeria

The Cross River State (Nigeria) marine and freshwater artisanal capture fisheries are divided into 4 categories according to the type of resources being exploited. Schaefer's production model is applied to each of the fisheries to estimate the maximum sustainable yields (Ymax). The total potential yield for all the fisheries in natural waters is 178,650 tonnes/year. This potential is unlikely to be achieved as more fishermen are abandoning the occupation due to the scarcity of boats, outboard engines and nets. Even if the full potentials were realized the production would still be short of what the State should produce by about 30.5%. Investment opportunities which, if effected can help to narrow the gap between the available and the desired level of production are enumerated

Lunar and seasonal variations in the catches of Macrobrachium fisheries of the Cross River Estuary, SE Nigeria

Monthly catches of the Macrobrachium fisheries were recorded at a commercial shrimp landing site on the coasts of Calabar (Nigeria), from April 1997 to August 1998. Catches fluctuated over an annual cycle, with two peaks occurring from May-July and November-December. These peaks represented periods of major activities, reproduction, recruitment or migration. Also, mean catches decreased in the months of February and August, corresponding to the peak of dry season and the so-called 'August break', respectively. Catches from active gears (seine, push net) varied among the moon phases too, with a main peak during full moon, and the minimum catch was recorded during the first moon quarter. However, the catch from passive gear (trap) depicted an inverse relationship, showing a peak during the first moon quarter. Variation in catches at different months and moon phases were significant at P:0.05. Recognize these variations and trends would help in management decisions such as defining closed seasons without adversely affecting the economy of the fishers

Pressures on the biota in the aquatic ecosystem of (Chi) Cross River National Park, Okwango Division

A preliminary survey of Cross River National Park (Nigeria), Okwangwo Division was carried out. The combined natural and human pressures being exerted on the aquatic resources were also investigated. Information on the existing fishing communities in and around the park area are given. The fishermen, their fishing methods and fishing grounds were identified. Limiting factors (natural and human) to the fisheries production, are analysed. Positive measures for conservation, protection and management of healthy and natural aquatic environment are suggested

Fishes of the Lagunas Encadenadas (Province of Buenos Aires, Argentina), a wetland of international importance

The Lagunas Encadenadas form a large endorheic wetland. The system comprises a chain of five main lagoons (Alsina, Chochico, Del Monte, Del Venado, and Epecuen). During two recent collection trips, 13 species of fish were caught. From the collected material and available data in the literature the following points can be made: The fish fauna of this wetland comprises 18 species from 11 families and six orders. Four species (Cyprinus carpio, Hoplias malabaricus, Loricariichthys anus and Parapimelodus valenciennis) are new records for these water bodies. Fish species diversity decreases from east to west, ie from the most freshwater lagoon (Alsina, with 15 species) to the most saline (Epecuen, 1 species). A similar diversity pattern has been found in zooplankton species.