Tensile flow and work hardening behavior of hot cross-rolled AA7010 aluminum alloy sheets

The present work describes the tensile flow and work hardening behavior of a high strength 7010 aluminum alloy by constitutive relations. The alloy has been hot rolled by three different cross-rolling schedules. Room temperature tensile properties have been evaluated as a function of tensile axis orientation in the as-hot rolled as well as peak aged conditions. It is found that both the Ludwigson and a generalized Voce-Bergstrom relation adequately describe the tensile flow behavior of the present alloy in all conditions compared to the Hollomon relation. The variation in the Ludwigson fitting parameter could be correlated well with the microstructural features and anisotropic contribution of strengthening precipitates in the as-rolled and peak aged conditions, respectively. The hardening rate and the saturation stress of the first Voce-Bergstrom parameter, on the other hand, depend mainly on the crystallographic texture of the specimens. It is further shown that for the peak aged specimens the uniform elongation (epsilon(u)) derived from the Ludwigson relation matches well with the measured epsilon(u) irrespective of processing and loading directions. However, the Ludwigson fit overestimates the epsilon(u) in case of the as-rolled specimens. The Hollomon fit, on the other hand, predicts well the measured epsilon(u), of the as-rolled specimens but severely underestimates the epsilon(u), for the peak aged specimens. Contrarily, both the relations significantly overestimate the UTS of the as-rolled and the peak aged specimens. The Voce-Bergstrom parameters define the slope of e Theta-sigma plots in the stage-III regime when the specimens show a classical linear decrease in hardening rate in stage-III. Further analysis of work hardening behavior throws some light on the effect of texture on the dislocation storage and dynamic recovery.

A synopsis of the traditional fishing gears used in artisanal fisheries along the upper part of the Cross River

Artisanal fishery is the main type of fishing practised occupationally by the fishermen along the upper sectors of the Cross River. No form of mechanised fishing has so far been introduced to the fishermen in these areas. This study has attempted to find out the different gears used, when and where used along the main river channel, its tributaries and flood plains. An effort has also been made to provide some information on the types of fishes caught with the different gears. Recommendation for effective management are also advanced

A review of bonga fisheries of the Cross River State, Nigeria

The Nigerian pelagic fishery contributes about two-thirds of the total marine fishery resources of the country. The main components of this fishery are the clupeid (Ethmalosa, and Sardinella spp) and the scombroid (jacks, barracuda and tuna) fisheries. In 1979 to 1983, fish production from the national inshore and brackishwater zones was 1,702,685 tonnes. Bonga (Ethmalosa fimbriata) which dominates the pelagic fishery in the Cross River State of Nigeria, contributed about 158,612 tonnes (i.e. 9.3%) of this national marine fish catch. Although bonga is caught along the entire Nigerian coast, a significant fishery exists mostly in the wider estuary of the Cross River State, which borders on the Cameroon Republic. In the Cross River State, and within the period, bonga contributed 24% to the marine fish landings. Bonga is supported by a single species (E. fimbriata). The species forms an important fishery all the year-round in the open sea off these estuaries, whenever the canoes venture to sea, but these open sea fisheries are affected by whether conditions. The best, and most suitable gear for bonga are the gill nets, cast nets, boat seines, and shore seines. Dried and smoked bonga are a common market commodity in the southern parts of the country generally, but particularly in the Cross State where it is a readily available and acceptable food item

An evaluation of the artisanal fisheries resources of the Cross River State of Nigeria

The Cross River State (Nigeria) marine and freshwater artisanal capture fisheries are divided into 4 categories according to the type of resources being exploited. Schaefer's production model is applied to each of the fisheries to estimate the maximum sustainable yields (Ymax). The total potential yield for all the fisheries in natural waters is 178,650 tonnes/year. This potential is unlikely to be achieved as more fishermen are abandoning the occupation due to the scarcity of boats, outboard engines and nets. Even if the full potentials were realized the production would still be short of what the State should produce by about 30.5%. Investment opportunities which, if effected can help to narrow the gap between the available and the desired level of production are enumerated

Lunar and seasonal variations in the catches of Macrobrachium fisheries of the Cross River Estuary, SE Nigeria

Monthly catches of the Macrobrachium fisheries were recorded at a commercial shrimp landing site on the coasts of Calabar (Nigeria), from April 1997 to August 1998. Catches fluctuated over an annual cycle, with two peaks occurring from May-July and November-December. These peaks represented periods of major activities, reproduction, recruitment or migration. Also, mean catches decreased in the months of February and August, corresponding to the peak of dry season and the so-called 'August break', respectively. Catches from active gears (seine, push net) varied among the moon phases too, with a main peak during full moon, and the minimum catch was recorded during the first moon quarter. However, the catch from passive gear (trap) depicted an inverse relationship, showing a peak during the first moon quarter. Variation in catches at different months and moon phases were significant at P:0.05. Recognize these variations and trends would help in management decisions such as defining closed seasons without adversely affecting the economy of the fishers

Pressures on the biota in the aquatic ecosystem of (Chi) Cross River National Park, Okwango Division

A preliminary survey of Cross River National Park (Nigeria), Okwangwo Division was carried out. The combined natural and human pressures being exerted on the aquatic resources were also investigated. Information on the existing fishing communities in and around the park area are given. The fishermen, their fishing methods and fishing grounds were identified. Limiting factors (natural and human) to the fisheries production, are analysed. Positive measures for conservation, protection and management of healthy and natural aquatic environment are suggested

An analytical model for guided wave inspection optimization for prismatic structures of any cross section.

This paper presents an analytical modeling technique for the simulation of long-range ultrasonic guided waves in structures. The model may be used to predict the displacement field in a prismatic structure arising from any excitation arrangement and may therefore be used as a tool to design new inspection systems. It is computationally efficient and relatively simple to implement, yet gives accuracy similar to finite element analysis and semi-analytical finite element analysis methods. The model has many potential applications; one example is the optimization of part-circumferential arrays where access to the full circumference of the pipe is restricted. The model has been successfully validated by comparison with finite element solutions. Experimental validation has also been carried out using an array of piezoelectric transducer elements to measure the displacement field arising from a single transducer element in an 88.9-mm-diameter pipe. Good agreement has been obtained between the two models and the experimental data.

The forming of variable cross-section I-beams by hot rolling

A process is presented for the forming of variable cross-section I-beams by hot rolling. Optimized I-beams with variable cross-section offer a significant weight advantage over prismatic beams. By tailoring the cross-section to the bending moment experienced within the beam, around 30% of the material can be saved compared to a standard section. Production of such beams by hot rolling would be advantageous, as It combines high volume capacity with high material yields. Through controlled variation of the roll gap during multiple passes, beams with a variable cross-section have been created using shaped rolls similar to those used for conventional I-beam rolling. The process was tested experimentally on a small scale rolling mill, using plasticine as the modelling material. These results were then compared to finite element simulations of individual stages of the process conducted using Abaqus/Standard. Results here show that the process can successfully form a beam with a variable depth web. The main failure modes of the process, and the limitations on the achievable variations In geometry are also presented. Finally, the question of whether or not optimal beam geometries can be created by this process Is discussed. © 2011 Wiley-VCH Verlag GmbH & Co. KGaA. Weinheim.

Geometry parameter optimization of large cross-sectional S-shaped bent rib waveguides for silicon based optical switches

地址: Chinese Acad Sci, Inst Semicond, State Key Lab Integrated Optoelect, Beijing 100083, Peoples R China

Dependence of the cross sections for Ir isotopes on the values of Qgg in the heavy ion collision

197Au were irradiated with 47 MeV/u 12C ions. Iridium was produced via the multinucleon transfer reactions in bombardments of 197Au with 12C. and was separated radiochemically from Au and the mixture of the reaction products. The γ radioactivities of Ir isotopes were measured by using a HPGe detector. The production cross sections of Ir isotopes were determined from activities of Ir isotopes at the end of bombardment and the other relative data. It has been found that the cross sections for neutron-rich iso...