Clastic cells: Mineralized tissue resorption in health and disease

Clastic cells are responsible for mineralized tissue resorption. Bone resorbing cells are called osteo-clasts; however, they are able to resorb mineralized dental tissues or calcified cartilage and then they are called odontoclasts and chondroclasts, respectively. They derive from mononuclear precursors of the monocyte-macrophage lineage from hemopoietic tissue, reach target mineralized tissues and degrade them under many different physiologic or pathologic stimuli. Clastic cells play a key role in calcium homeostasis, and participate in skeletal growth, tooth movement, and other physiological and pathological events. They interact tightly with forming cells in bone and dental hard tissues; their unbalance may result in disturbed resorptive activity thus, causing local or systemic diseases. (C) 2008 Elsevier Ltd. All rights reserved.

Expression of bone resorption regulators (RANK, RANKL, and OPG) in odontogenic tumors

Objective. To investigate the expression of bone resorption regulators (receptor activator of nuclear factor kappa B [RANK], RANK ligand [RANKL], and osteoprotegerin [OPG]) in calcifying cystic odontogenic tumor (CCOT), adenomatoid odontogenic tumor (AOT), calcifying epithelial odontogenic tumor (CEOT), odontogenic myxoma (OM), and ameloblastic fibroma (AF). Study design. The expression of these mediators was evaluated by means of immunohistochemistry. Results. All specimens demonstrated positive immunoreactivity to RANK, RANKL, and OPG. The quantification of these mediators in epithelium revealed a similar pattern of expression for RANKL and OPG in CCOT, AOT, CEOT, and AF. With regard to stromal/mesenchymal cells, the majority of AOT and CCOT cases showed a higher content of OPG than RANKL, whereas CEOT, OM, and especially AF had a tendency to present a greater content of RANKL than OPG. Conclusion. Our data indicate that the CCOT, AOT, CEOT, OM, and AF cell constituents express key regulators of bone metabolism that might locally modulate tumor-associated bone resorption. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2008;106:548-55)

Mineral trioxide aggregate as an alternative treatment for intruded permanent teeth with root resorption and incomplete apex formation

A case of extensive crown fracture associated with intrusion of the permanent maxillary central incisors in an 8-year-old boy is reported. The treatment of both injured teeth included attempts of apexification and arrest of root resorption with calcium hydroxide. After 8 months of the trauma, there was no calcified barrier formation in the apex. Mineral trioxide aggregate (MTA) was then used as a filling material. At 15-month follow up, the teeth were asymptomatic and correctly sealed, the external inflammatory root resorption had stopped, and the radiolucent image had disappeared, which meant the initial healing of the periapical lesion. MTA may be considered as an alternative option for the treatment of traumatized and immature permanent teeth.

Effects of accentuated and reversed curve of Spee on apical root resorption

Introduction: In this study, we evaluated the influence of intrusion mechanics with accentuated and reversed curve of Spee on root resorption of the maxillary and mandibular incisors. Methods: A sample of 60 patients with Class I and Class II Division 1 malocclusions having nonextraction treatment was divided into 2 groups with the following characteristics: group 1 comprised 30 deepbite patients, treated with accentuated and reversed curve of Spee intrusion mechanics, with an initial mean age of 12.8 +/- 1.23 years (range, 10.01-15.32 years), and group 2 comprised 30 patients with normal overbite treated without intrusion mechanics, with an initial mean age of 12.87 +/- 1.43 years ( range, 10.02-15.36 years). Pretreatment and posttreatment periapical radiographs were used to evaluate root resorption. The groups were compared by using the Mann-Whitney U test. Correlation between root resorption and tooth movement was investigated with the Spearman correlation coefficient. Results: The deepbite group treated with accentuated and reversed curve of Spee had statistically greater root resorption ( 1.87) than the normal overbite group ( 1.54), at P=.017. Changes in overbite and vertical displacements of the maxillary central incisor apices had significant correlations to root resorption ( r = 0.30, P =.019; r = 0.27, P =.037, respectively). Conclusions: Accentuating and reversing the curve of Spee in the archwires to correct deep overbite causes more root resorption than nonintrusive mechanics.

Precipitation hardening of Cu-Fe-Cr alloys - Part I - Mechanical and electrical properties

This research is part of a project whose scope was to investigate the engineering properties of new non-commercial alloy formulations based on the Cu rich corner of the Cu-Fe-Cr ternary system with the primary aim of exploring the development of a new cost-effective high-strength, high-conductivity copper alloy. The literature indicated that Cu rich Cu-Cr and Cu-Fe alloys have been thoroughly investigated. A number of commercial alloys have been developed and these are used for a variety of applications requiring combinations of high-strength, high-conductivity and resistance to softening. Little evidence was found in the literature that the Cu rich corner of the Cu-Fe-Cr system had previously been investigated for the purpose of developing high-strength, high-conductivity copper alloys resistant to softening. The aim of these present investigations was to explore the possibility that new alloys could be developed that combined the properties of both sets of alloys, ie large precipitation hardening response combined with the ability to stabilise cold worked microstructures to high temperatures while at the same maintain high electrical conductivity. To assess the feasibility of this goal the following alloys were chosen for investigation: Cu-0.7wt%Cr-0.3wt%Fe, Cu-0.7wt%Cr-0.8wt%Fe, Cu-0.7wt%Cr-2.0wt%Fe. This paper reports on the mechanical property investigation which indicated that the Cu-0.7wt%Cr-0.3wt%Fe, and Cu-0.7wt%Cr-2.0wt%Fe alloys were worthy of further investigation. (C) 2001 Kluwer Academic Publishers.

Precipitation hardening of Cu-Fe-Cr alloys - Part II - Microstructural characterisation

This research is part of a project whose scope was to investigate the engineering properties of new non-commercial alloy formulations based on the Cu rich corner of the Cu-Fe-Cr ternary system with the primary aim of exploring the development of a new cost-effective high-strength, high-conductivity copper alloy. Promising properties have been measured for the following alloys: Cu-0.7wt%Cr-0.3wt%Fe and Cu-0.7wt%Cr-2.0wt%Fe. This paper reports on the microstructural characterisation of these alloys and discusses the mechanical and electrical properties of these alloys in terms of their microstructure, particularly the formation of precipitates. These alloys have evinced properties that warrant further investigation. Cost modelling has shown that Cu-0.7wt%Cr-0.3wt%Fe is approximately 25% cheaper to produce than commercial Cu-1%Cr. It has also been shown to be more cost efficient on a yield stress and % IACS per dollar basis. The reason for the cost saving is that the Cu-0.7%Cr-0.3%Fe alloy can be made with low carbon ferro-chrome additions as the source of chromium rather than the more expensive Cu-Cr master-alloy. For applications in which cost is one of the primary materials selection criteria, it is envisaged that there would be numerous applications in both cast and wrought form, where the Cu-0.7%Cr-0.3%Fe alloy would be more suitable than Cu-1%Cr. (C) 2001 Kluwer Academic Publishers.

Quaternary Cu-0.7%Cr-0.3%Fe-X alloys

This research is part of a project whose scope was to investigate the engineering properties of new non-commercial alloy formulations based on the Cu rich corner of the Cu-Fe-Cr ternary system with the primary aim of exploring the development of a new cost-effective high-strength, high-conductivity copper alloy. The aim of the present work was to increase the electrical conductivity and strength of the Cu-0.7wt%Cr-0.3wt%Fe alloy through selective minor additions (less than or equal to0.15 wt%) of elements expected to promote precipitation of dissolved Fe: Ti, B, P, Ni & Y. Such quaternary alloys with reduced Fe in solid solution would be expected to have properties equivalent to or better than those of the Cu-1%Cr reference alloy (Alloy Z). The investigation showed that none of the trace element additions significantly improved the size of the age hardening response or the peak aged electrical conductivity of Alloy A, although further work is required on the influence of Ti. Additions of P and B were detrimental. Other trace additions had little or no effect apart from causing some slight changes to the precipitation kinetics. The mechanical properties of the Cu-0.7%Cr-0.3%Fe alloy made with less expensive high carbon ferrochrome were found to be inferior to those of the equivalent alloy made with low carbon ferrochrome. (C) 2001 Kluwer Academic Publishers.

Cold worked Cu-Fe-Cr alloys

The aim of this project was to investigate the properties of copper rich Cu-Fe-Cr alloys for the purpose of developing a new cost effective, high-strength, high-conductivity copper alloy. This paper reports on the influence of cold work. The age hardening response of the Cu-0.7%Cr-2.0%Fe alloy was minimal, but the resistance to softening was superior to that reported for any commercial high-strength, high-conductivity (HSHC) copper alloy with comparable mechanical and electrical properties. For example, an excess of 85% of the original hardness of the 40% cold worked alloy is retained after holding at 700 degreesC for 1 hour, whereas commercial HSHC Cu-Fe-P alloys have been reported to soften significantly after 1 hours exposure at less than 500 degreesC. The Cu-0.7Cr-2.0Fe alloy would therefore be expected to be more suitable for applications with a significant risk of exposure to elevated temperatures. Optical microscope examination of cold worked and aged microstructures confirmed the high resistance to recrystallization for Cu-0.7%Cr-2.0%Fe. The Zener-Smith drag term, predicting the pinning effect of second phase particles on dislocations in cold worked microstructures, was calculated using the precipitate characteristics obtained from TEM, WDS and resistivity measurements. The pinning effect of the precipitate dispersions in the peak-aged condition was determined to be essentially equivalent for the Cu-0.7%Cr-0.3%Fe and Cu-0.7%Cr-2.0%Fe alloys. A lower recrystallisation temperature in the Cu-0.7%Cr-0.3%Fe alloy was therefore attributed to faster coarsening kinetics of the secondary precipitates resulting from a higher Cr concentration in the precipitates at lower iron content. (C) 2001 Kluwer Academic Publishers.

Programa de cr??dito produtivo popular Crediamigo: central de microcr??dito do Nordeste

As pol??ticas de desenvolvimento consideram que um dos principais obst??culos para o crescimento dos microeempreendimentos ?? a falta de acesso ??s fontes de financiamento, principalmente ??queles emergidos como formas alternativas de ocupa????o e renda. Esses pequenos neg??cios, em sua maioria informais, vem apresentando n??veis de alto crescimento em todo o Pa??s, em especial na regi??o Nordeste, principalmente nos grandes centros urbanos, comprovada por pesquisas cient??ficas realizadas. Considerando que o acesso dessa camada da popula????o ao sistema banc??rio ?? dif??cil, devido ao baixo n??vel operacional, ao tamanho dos neg??cios e ?? qualidade ou inexist??ncia de garantias, o Banco do Nordeste lan??a o Programa CrediAmigo com o objetivo de contribuir para o crescimento de microempresas, mediante a oferta de cr??dito para atividades produtivas e servi??os de capacita????o, de forma a garantir ao agente produtivo condi????es para ele gerir bem seus neg??cios, atrav??s da melhoria da competitividade e integra????o ao mercado globalizado. Dessa forma, o CrediAmigo permite f??cil acesso a esse segmento da popula????o marginalizada do sistema financeiro formal e que recorrem e dependem de agiotas e fornecedores que lhes cobram taxas de juros bem acima do mercado. Para atender esses agentes produtivos o CrediAmigo utiliza uma metodologia inovadora de concess??o de cr??dito que permite a libera????o dos recursos de forma ??gil, desburocratizada e sem as garantias tradicionais exigidas, funcionando com grupos solid??rios, proporcionando uma maior democratiza????o do cr??dito. At?? jul/99 o CrediAmigo j?? atendeu a 121.444 cidad??os com financiamento na ordem de R$ 74,2 milh??es

Redesenho do processo de concess??o de cr??dito

As muta????es verificadas no cen??rio mundial passaram a exigir das organiza????es posicionamento proativo voltado para a percep????o do cliente. Tornou-se imperativo a ado????o de medidas que induzissem ?? descentraliza????o, ?? desregulamenta????o e ?? desburocratiza????o, tornando-as din??micas, ??geis, descomplicadas e voltadas para o enfoque do mercado e, acima de tudo, buscando a satisfa????o do cliente. Referido Processo, considerado o mais cr??tico da Institui????o, inaugurou um conjunto de medidas reformuladoras, de ordem processual, atitudinal e comportamental, buscando como premissa b??sica o foco no cliente. Esse redesenho resultou na elimina????o de atividades redundantes, retrabalhos e mudan??as desnecess??rias de interlocutores, permitindo o atendimento tempestivo e oportuno com a conseq??ente satisfa????o do cliente, o agente produtivo, capacitando-o, oferecendo-lhe produtos e servi??os que viabilizem os seus empreendimentos produtivos, tornando-os competitivos via integra????o nas cadeias produtivas e inser????o nas pol??ticas de desenvolvimento regional e nacional. A mensura????o dos resultados pode ser expressa, em princ??pio, com a observa????o de alguns indicadores: Em 1994, o prazo m??dio de atendimento de uma proposta de cr??dito era de 217 dias. Ap??s implementadas as mudan??as situou-se em 21 dias. A quantidade de projetos/ano atendidos evoluiu de 27 mil, em 1994, para 286 mil, em 1997

Introdu????o ?? cr??tica da raz??o desestatizante

O artigo compreende uma vis??o cr??tica sobre os processos de reestrutura????o do Estado baseados na l??gica neoliberal, que caracterizam as reformas minimalistas da d??cada de 80. O tema da reforma do Estado ?? visto como um dos grandes desafios intelectuais e pol??ticos deste fim de s??culo, devendo necessariamente ser contextualizado historicamente, uma vez que n??o existe uma ??nica crise do Estado, mas v??rias crises dos Estados espec??ficas e particulares, cujas solu????es n??o s??o ??nicas nem universais, mas dependentes do diagn??stico de cada caso. Entende-se que a raz??o desestatizante apresenta limita????es, reconhecidas at?? mesmo pelas institui????es financeiras internacionais que antes a defendiam. O cen??rio de um novo modo de atua????o estatal ?? apresentado como mais prov??vel, sendo o conceito de reestatiza????o mais adequado para as mudan??as que se fazem necess??rias.

Transformando burocracias para financiar os mais pobres: a evolu????o do Pronaf Cr??dito Grupo B

Institui????es banc??rias tradicionalmente n??o oferecem servi??os financeiros, principalmente cr??dito produtivo, aos grupos de mais baixa renda. Considerando-se a rigidez do sistema financeiro em trabalhar com os mais pobres, o presente artigo descreve o processo de cria????o e aperfei??oamento de uma pol??tica p??blica de microcr??dito rural dentro do Programa Nacional de Fortalecimento da Agricultura Familiar (Pronaf). S??o apresentadas as motiva????es para altera????es no desenho da linha de cr??dito, assim como as mudan??as normativas, de fontes e de agentes operadores, efetuadas em cada ano-safra para tornar poss??vel superar os desafios apresentados pela burocracia do Sistema Nacional de Cr??dito Rural ??? SNCR. O texto apresenta ainda o impacto no n??mero de contrata????es resultante das diversas medidas tomadas. Finalmente, ?? feito um balan??o das principais li????es aprendidas assim como dos desafios atuais de maior qualifica????o do microcr??dito e integra????o com outras pol??ticas p??blicas.

Desenvolvimento de metodologia para determinação de Co, Cr, Fe, Mn, Ni, Se e V em amostras de água produzida da indústria do petróleo através da técnica ICP OES utilizando digestão por micro-ondas

O descarte ou reutilização da água produzida da indústria do petróleo é difícil por causa dos impactos ambientais causados devido à presença de alta salinidade e componentes tóxicos, ou pelo risco de obstrução nas colunas de produção devido à formação de incrustações que causam redução na produção de petróleo e enormes perdas no processo de extração. Assim, o conhecimento da composição química da água produzida é muito importante. O método proposto por este trabalho visa a determinação de elementos traço (Co, Cr, Fe, Mn, Ni, Se e V) em amostras de água produzida de petróleo por espectrometria de emissão óptica com plasma indutivamente acoplado (ICP OES) utilizando a digestão ácida assistida por micro-ondas para o preparo das amostras (15 g de amostra e 2 mL de HNO3 concentrado). A curva analítica construída em HNO3 2% v v-1 foi adotada para o método após verificar que não é necessário o uso de salinidade para equiparação de matriz. Para o elemento Ni, não há necessidade do uso de padrão interno, para os elementos Co, Cr, Fe, Mn e V os melhores resultados foram obtidos usando Sc como padrão interno. Para o elemento Se é recomendado o uso de Y como padrão interno. Os limites de detecção obtidos foram Co 0,67, Cr 1,2, Fe 2,3, Mn 0,49, Ni 1,9, Se 3,7 e V 5,5 μg L-1; e os limites de quantificação foram Co 2,2, Cr 4,0, Fe 7,7, Mn 1,6, Ni 6,5, Se 12,4 e V 18,3 μg L-1. A exatidão do procedimento foi verificada através de testes de recuperação em dois níveis de concentração (40 e 80 μg L-1) e análise dos materiais certificados de referência de água estuarina SLEW-2 e de água do mar NASS-5. Bons valores de recuperação foram obtidos e não houve diferença significativa (95% de confiança) entre os resultados obtidos e os valores certificados dos materiais de referência.