XSophe-Sophe-XeprView (R). A computer simulation software suite (v. 1.1.3) for the analysis of continuous wave EPR spectra

The XSophe-Sophe-XeprView((R)) computer simulation software suite enables scientists to easily determine spin Hamiltonian parameters from isotropic, randomly oriented and single crystal continuous wave electron paramagnetic resonance (CW EPR) spectra from radicals and isolated paramagnetic metal ion centers or clusters found in metalloproteins, chemical systems and materials science. XSophe provides an X-windows graphical user interface to the Sophe programme and allows: creation of multiple input files, local and remote execution of Sophe, the display of sophelog (output from Sophe) and input parameters/files. Sophe is a sophisticated computer simulation software programme employing a number of innovative technologies including; the Sydney OPera HousE (SOPHE) partition and interpolation schemes, a field segmentation algorithm, the mosaic misorientation linewidth model, parallelization and spectral optimisation. In conjunction with the SOPHE partition scheme and the field segmentation algorithm, the SOPHE interpolation scheme and the mosaic misorientation linewidth model greatly increase the speed of simulations for most spin systems. Employing brute force matrix diagonalization in the simulation of an EPR spectrum from a high spin Cr(III) complex with the spin Hamiltonian parameters g(e) = 2.00, D = 0.10 cm(-1), E/D = 0.25, A(x) = 120.0, A(y) = 120.0, A(z) = 240.0 x 10(-4) cm(-1) requires a SOPHE grid size of N = 400 (to produce a good signal to noise ratio) and takes 229.47 s. In contrast the use of either the SOPHE interpolation scheme or the mosaic misorientation linewidth model requires a SOPHE grid size of only N = 18 and takes 44.08 and 0.79 s, respectively. Results from Sophe are transferred via the Common Object Request Broker Architecture (CORBA) to XSophe and subsequently to XeprView((R)) where the simulated CW EPR spectra (1D and 2D) can be compared to the experimental spectra. Energy level diagrams, transition roadmaps and transition surfaces aid the interpretation of complicated randomly oriented CW EPR spectra and can be viewed with a web browser and an OpenInventor scene graph viewer.

User guide for shock and blast simulation with the OctVCE code (version 3.5+), Department of Mechanical Engineering Report 2007/13

OctVCE is a cartesian cell CFD code produced especially for numerical simulations of shock and blast wave interactions with complex geometries. Virtual Cell Embedding (VCE) was chosen as its cartesian cell kernel as it is simple to code and sufficient for practical engineering design problems. This also makes the code much more ‘user-friendly’ than structured grid approaches as the gridding process is done automatically. The CFD methodology relies on a finite-volume formulation of the unsteady Euler equations and is solved using a standard explicit Godonov (MUSCL) scheme. Both octree-based adaptive mesh refinement and shared-memory parallel processing capability have also been incorporated. For further details on the theory behind the code, see the companion report 2007/12.

Flow and axial dispersion simulation for traveling axisymmetric Taylor vortices

Numerical experiments using a finite difference method were carried out to determine the motion of axisymmetric Taylor vortices for narrow-gap Taylor vortex flow. When a pressure gradient is imposed on the flow the vortices are observed to move with an axial speed of 1.16 +/- 0.005 times the mean axial flow velocity. The method of Brenner was used to calculate the long-time axial spread of material in the flow. For flows where there is no pressure gradient, the axial dispersion scales with the square root of the molecular diffusion, in agreement with the results of Rosen-bluth et al. for high Peclet number dispersion in spatially periodic flows with a roll structure. When a pressure gradient is imposed the dispersion increases by an amount approximately equal to 6.5 x 10(-4) (W) over bar(2)d(2)/D-m, where (W) over bar is the average axial velocity in the annulus, analogous to Taylor dispersion for laminar flow in an empty tube.

Improving wheat simulation capabilities in Australia from a cropping systems perspective - II. Testing simulation capabilities of wheat growth

To simulate cropping systems, crop models must not only give reliable predictions of yield across a wide range of environmental conditions, they must also quantify water and nutrient use well, so that the status of the soil at maturity is a good representation of the starting conditions for the next cropping sequence. To assess the suitability for this task a range of crop models, currently used in Australia, were tested. The models differed in their design objectives, complexity and structure and were (i) tested on diverse, independent data sets from a wide range of environments and (ii) model components were further evaluated with one detailed data set from a semi-arid environment. All models were coded into the cropping systems shell APSIM, which provides a common soil water and nitrogen balance. Crop development was input, thus differences between simulations were caused entirely by difference in simulating crop growth. Under nitrogen non-limiting conditions between 73 and 85% of the observed kernel yield variation across environments was explained by the models. This ranged from 51 to 77% under varying nitrogen supply. Water and nitrogen effects on leaf area index were predicted poorly by all models resulting in erroneous predictions of dry matter accumulation and water use. When measured light interception was used as input, most models improved in their prediction of dry matter and yield. This test highlighted a range of compensating errors in all modelling approaches. Time course and final amount of water extraction was simulated well by two models, while others left up to 25% of potentially available soil water in the profile. Kernel nitrogen percentage was predicted poorly by all models due to its sensitivity to small dry matter changes. Yield and dry matter could be estimated adequately for a range of environmental conditions using the general concepts of radiation use efficiency and transpiration efficiency. However, leaf area and kernel nitrogen dynamics need to be improved to achieve better estimates of water and nitrogen use if such models are to be use to evaluate cropping systems. (C) 1998 Elsevier Science B.V.

Improving wheat simulation capabilities in Australia from a cropping systems perspective - III. The integrated wheat model (I_WHEAT)

Previous work has identified several short-comings in the ability of four spring wheat and one barley model to simulate crop processes and resource utilization. This can have important implications when such models are used within systems models where final soil water and nitrogen conditions of one crop define the starting conditions of the following crop. In an attempt to overcome these limitations and to reconcile a range of modelling approaches, existing model components that worked demonstrably well were combined with new components for aspects where existing capabilities were inadequate. This resulted in the Integrated Wheat Model (I_WHEAT), which was developed as a module of the cropping systems model APSIM. To increase predictive capability of the model, process detail was reduced, where possible, by replacing groups of processes with conservative, biologically meaningful parameters. I_WHEAT does not contain a soil water or soil nitrogen balance. These are present as other modules of APSIM. In I_WHEAT, yield is simulated using a linear increase in harvest index whereby nitrogen or water limitations can lead to early termination of grainfilling and hence cessation of harvest index increase. Dry matter increase is calculated either from the amount of intercepted radiation and radiation conversion efficiency or from the amount of water transpired and transpiration efficiency, depending on the most limiting resource. Leaf area and tiller formation are calculated from thermal time and a cultivar specific phyllochron interval. Nitrogen limitation first reduces leaf area and then affects radiation conversion efficiency as it becomes more severe. Water or nitrogen limitations result in reduced leaf expansion, accelerated leaf senescence or tiller death. This reduces the radiation load on the crop canopy (i.e. demand for water) and can make nitrogen available for translocation to other organs. Sensitive feedbacks between light interception and dry matter accumulation are avoided by having environmental effects acting directly on leaf area development, rather than via biomass production. This makes the model more stable across environments without losing the interactions between the different external influences. When comparing model output with models tested previously using data from a wide range of agro-climatic conditions, yield and biomass predictions were equal to the best of those models, but improvements could be demonstrated for simulating leaf area dynamics in response to water and nitrogen supply, kernel nitrogen content, and total water and nitrogen use. I_WHEAT does not require calibration for any of the environments tested. Further model improvement should concentrate on improving phenology simulations, a more thorough derivation of coefficients to describe leaf area development and a better quantification of some processes related to nitrogen dynamics. (C) 1998 Elsevier Science B.V.

Cohort trends in age of initiation to heroin use

This paper examines gender differences and trends over time in the age of initiation to heroin use. Data from two large surveys: the Sydney component of the ANAIDUS, conducted in 1989, and the ASHIDU, conducted in 1994, were used to examine this issue. Together, these studies contained information on 1,292 individuals who identified themselves as heroin users. Results indicated that, while there were no significant gender differences in age of initiation to heroin use, there was a significant (p < 0.001) time trend in the mean age at which heroin was first used. Specifically, the mean age of first heroin use among individuals born during the interval 1940-1949 was 20.5 years while among those born during 1970-1979 the mean age of first heroin use was 16.5 years. These findings were confirmed by analyses of the National Household Survey. Further analysis of the ASHIDU data indicated that younger age of initiation to heroin use was associated with polydrug use, overdose and crime after the effects of duration of heroin use had been statistically controlled. These findings suggest that there has been both an increase in the willingness of young people to experiment with heroin and an increased availability of the drug over this time. In combination with evidence that there has been an increase in the amount of heroin being imported into Australia, and an increased demand for treatment for opiate dependence, these data suggest that Australia is experiencing an increase in the use of heroin, particularly among youth.

Erosion/productivity modelling of maize farming in the Philippine uplands part II: Simulation of alternative farming methods

A version of the Agricultural Production Systems Simulator (APSIM) capable of simulating the key agronomic aspects of intercropping maize between legume shrub hedgerows was described and parameterised in the first paper of this series (Nelson et al., this issue). In this paper, APSIM is used to simulate maize yields and soil erosion from traditional open-field farming and hedgerow intercropping in the Philippine uplands. Two variants of open-field farming were simulated using APSIM, continuous and fallow, for comparison with intercropping maize between leguminous shrub hedgerows. Continuous open-field maize farming was predicted to be unsustainable in the long term, while fallow open-field farming was predicted to slow productivity decline by spreading the effect of erosion over a larger cropping area. Hedgerow intercropping was predicted to reduce erosion by maintaining soil surface cover during periods of intense rainfall, contributing to sustainable production of maize in the long term. In the third paper in this series, Nelson et al. (this issue) use cost-benefit analysis to compare the economic viability of hedgerow intercropping relative to traditional open-field farming of maize in relatively inaccessible upland areas. (C) 1998 Elsevier Science Ltd. All rights reserved.

Flush air data system calibration using numerical simulation

The use of computational fluid dynamics simulations for calibrating a flush air data system is described, In particular, the flush air data system of the HYFLEX hypersonic vehicle is used as a case study. The HYFLEX air data system consists of nine pressure ports located flush with the vehicle nose surface, connected to onboard pressure transducers, After appropriate processing, surface pressure measurements can he converted into useful air data parameters. The processing algorithm requires an accurate pressure model, which relates air data parameters to the measured pressures. In the past, such pressure models have been calibrated using combinations of flight data, ground-based experimental results, and numerical simulation. We perform a calibration of the HYFLEX flush air data system using computational fluid dynamics simulations exclusively, The simulations are used to build an empirical pressure model that accurately describes the HYFLEX nose pressure distribution ol cr a range of flight conditions. We believe that computational fluid dynamics provides a quick and inexpensive way to calibrate the air data system and is applicable to a broad range of flight conditions, When tested with HYFLEX flight data, the calibrated system is found to work well. It predicts vehicle angle of attack and angle of sideslip to accuracy levels that generally satisfy flight control requirements. Dynamic pressure is predicted to within the resolution of the onboard inertial measurement unit. We find that wind-tunnel experiments and flight data are not necessary to accurately calibrate the HYFLEX flush air data system for hypersonic flight.

Simulation and optimization of heated, inviscid flows in scramjet ducts

A space-marching code for the simulation and optimization of inviscid supersonic flow in three dimensions is described. The now in a scramjet module with a relatively complex three-dimensional geometry is examined and wall-pressure estimates are compared with experimental data. Given that viscous effects are not presently included, the comparison is reasonable. The thermodynamic compromise of adding heat in a diverging combustor is also examined. The code is then used to optimize the shape of a thrust surface for a simpler (box-section) scramjet module in the presence of uniform and nonuniform heat distributions. The optimum two-dimensional profiles for the thrust surface are obtained via a perturbation procedure that requires about 30-50 now solutions. It is found that the final shapes are fairly insensitive to the details of the heat distribution.

Women's health Australia: Recruitment for a national longitudinal cohort study

The Women's Health Australia (WHA) project is a longitudinal study of several cohorts of Australian women, which aims to examine the relationships between biological, psychological, social and lifestyle factors and women's physical health, emotional well-being, and their use of and satisfaction with health care. Using the Medicare database as a sampling frame (with oversampling of women from rural and remote areas), 106,000 women in the three age groups 18-23, 45-50 and 70-75 were sent an invitation to participate and a 24-page self-complete questionnaire. Reminder letters, a nation-wide publicity campaign, information brochures, a freecall number for inquiries, and the option of completing the questionnaire by telephone in English or in the respondent's own language, were used to encourage participation. Statutory regulations precluded telephone follow-up of non-respondents. Response rates were 41% (N = 14,792), 54% (N = 14,200) and 36% (N = 12,614) for the three age groups. Comparison with Australian census data indicated that the samples are reasonably representative of Australian women in these age groups, except fur a somewhat higher representation of women who are married or in a defacto relationship, and of women with post-school education. The most common reason for non-participation was lack of interest or time. Personal circumstances, objections to the questionnaire or specific items in it, and concerns about confidentiality were the other main reasons. Recruitment of three representative age-group cohorts of women, and the maintenance of these cohorts over a number of years, will provide a valuable opportunity to examine associations over time between aspects of women's lives and their physical and emotional health and well-being.

Twice-weekly, directly observed treatment for HIV-infected and uninfected tuberculosis patients: cohort study in rural South Africa

Objective: To determine the effectiveness of twice-weekly directly observed therapy (DOT) for tuberculosis (TB) in HIV-infected and uninfected patients, irrespective of their previous treatment history. Also to determine the predictive value of 2-3 month smears on treatment outcome. Methods: Four hundred and sixteen new and 113 previously treated adults with culture positive pulmonary TB (58% HIV infected, 9% combined drug resistance) in Hlabisa, South Africa. Daily isoniazid (H), rifampicin (R), pyrazinamide (Z) and ethambutol (E) given in hospital (median 17 days), followed by HRZE twice a week to 2 months and HR twice a week to 6 months in the community. Results: Outcomes at 6 months among the 416 new patients were: transferred out 2%; interrupted treatment 17%; completed treatment 3%; failure 2%; and cured 71%. Outcomes were similar among HIV-infected and uninfected patients except for death (6 versus 2%; P = 0.03). Cure was frequent among adherent HIV-infected (97%; 95% CI 94-99%) and uninfected (96%; 95% CI 92-99%) new patients. Outcomes were similar among previously treated and new patients, except for death (11 versus 4%; P = 0.01), and cure among adherent previously treated patients 97% (95% CI 92-99%) was high. Smear results at 2 months did not predict the final outcome. Conclusion: A twice-weekly rifampicin-containing drug regimen given under DOT cures most adherent patients irrespective of HIV status and previous treatment history. The 2 month smear may be safely omitted. Relapse rates need to be determined, and an improved system of keeping treatment interrupters on therapy is needed. Simplified TB treatment may aid implementation of the DOTS strategy in settings with high TB caseloads secondary to the HIV epidemic. (C) 1999 Lippincott Williams & Wilkins.

A case-control study of employment status and mortality in a cohort of Australian youth

Recent studies have demonstrated a link in young populations between unemployment and ill health. The purpose of this study is to correlate mortality with employment status in two cohorts of young Australian males, aged 17-25 years, from 1984 to 1988. Two youth cohorts consisting of an initially unemployed sample (n = 1424 males) and a population sample (n = 4573 males), were surveyed annually throughout the study period. Those lost to follow-up during the survey period were matched with death registries across Australia. Employment status was determined from weekly diaries and death certificates and was designated as: employed or student; unemployed; not in the work force (excluding students). Conditional logistic regression, using age- and cohort- matched cases (deaths) and controls (alive), was used to estimate the odds ratio (OR) of dying with regard to employment status, taking into account potential confounders such as ethnicity, aboriginality, educational attainment, pre-existing health problems, socio-economic status of parents, and other factors. Twenty three male survey respondents were positively matched to death registry records. Compared to those employed or students (referent group), significantly elevated ORs were found to be associated with neither being in the workforce nor a student for all cause, external cause, and external cause mortality other than suicide. Odds ratios were adjusted for age, survey cohort, ethnicity, pre-existing physical and mental health status, education level, and socio-economic status of parent(s). A statistically significant increasing linear trend in odds ratios of male mortality for most cause groups was found across the employment categories, from those employed or student (lowest ORs), through those unemployed; to those not in the workforce (highest ORs). Suicide was higher, but not statistically significantly, in those unemployed or not in the workforce. Suicide also was associated, though not significantly, with the respondent not living with their parents when they were 14 years of age. No association was found between mortality and past unemployment experience, as measured by length of time spent unemployed, or the number of spells of unemployment experienced during the survey. The results of this study underscore the elevated risk to survival in young males as a consequence of being neither employed nor a student. (C) 1999 Elsevier Science Ltd. All rights reserved.

Opioid overdose mortality in Australia, 1964-1997: birth-cohort trends

Objective: To examine trends in rates of opioid overdose deaths from 1964 to 1997 in different birth cohorts. Design: Age-period-cohort analysis of national data from the Australian Bureau of Statistics. Main outcome measures: Annual population rates of death attributed to opioid dependence or accidental opioid poisoning in people aged 15-44 years, by sex and birth cohort tin five-year intervals, 1940-1944 to 1975-1979). Results: The rate of opioid overdose deaths increased 55-fold between 1964 and 1997, from 1.3 to 71.5 per million population aged 15-44 years. The rate of opioid overdose deaths also increased substantially over the eight birth cohorts, with an incidence rate ratio of 20.70 (95% confidence interval, 13.60-31.46) in the 1975-1979 cohort compared with the 1940-1944 cohort. The age at which the cumulative rate of opioid overdose deaths reached 300 per million fell in successive cohorts (for men, from 28 years among those born 1955-1959 to 22 years among those born 1965-1974; for women, from 33 years among those born 1955-1959 to 27 years among those born 1965-1969). Conclusions: Heroin use in Australia largely began in the early 1970s and rates of heroin use have markedly increased in birth cohorts born since 1950.

Women's health Australia: On the progress of the main cohort studies

More than 41,000 women aged 18-23, 45-50, and 70-75 years in 1996 are participating in the Australian Longitudinal Study on Women's Health (Women's Health Australia). Baseline surveys were conducted for all three cohorts in 1996, and the first follow-up survey of the mid-age group in 1998 has achieved a response rate exceeding 90%. The main findings so far reflect the large differences in the life experiences of the three cohorts. The young women report high levels of stress. The physical and mental health of those with young children is worse than for those without children, but confounding by sociodemographic characteristics may account for the differences. Two thirds of young women in the healthy weight or underweight range would like to weigh less, and early onset of dieting is associated with poorer physical and mental health. Most of the women in the mid-age group have multiple roles-in paid work, home duties, and caring for children and other dependents. The potential of the study to investigate the long-term impact of such busy lives on health outcomes is considerable. At this stage, the main health issues for these women relate to tiredness, weight gain, and menopause. The older cohort presents a picture of positive aging. These women are heavier users of health services than the mid-age and younger women, and they are also more satisfied with these services. Although their physical health is poorer, their mental health is better, and they report less stress than women in the other two cohorts. The follow-up survey of this group, planned for 1999, will focus on the coping strategies used by these women. An overall goal of the project is to understand the interactions among social roles, life events, and women's health in order to provide a basis for improved health policies and services. Analysis of these interactions, which relies on both quantitative and qualitative data, poses many challenges that will be addressed as the longitudinal data become available.