Técnica do grupo focal como método de avaliação do conhecimento de adolescentes sobre saúde bucal

This study aims to the understanding of adolescents regarding oral health, using the Focus Group technique. The study was conducted at three public schools in the city of Araçatuba, São Paulo State, Brazil, with ten students in each. In order to conduct the focus groups, the following words, which featured high error levels, were addressed in survey questions on oral health: oral health; plaque, permanent teeth; fluoride; gum bleeds?; dental floss; transmission of cavities. During the discussions in the focus groups, it was observed that many teenagers were surprised at the situation to which they were submitted and at the topic they were discussing. The word 'oral health' was associated with the condition of cleanliness of the oral cavity, not identifying oral health as part of general health. The term 'transmission of cavities' did not have a sufficient understanding. The term 'permanent tooth' was well understood and was associated with a type of tooth that would not be replaced. The word 'fluoride' had more association with the task of cleaning than protection of the teeth. It is concluded that the use of the focus group technique is of great importance in the interpretation of the knowledge of adolescents on oral health and the appropriateness of the terminology of questionnaires on the same subject.

Vibration and oil analysis for monitoring problems related to water contamination in rolling

Trying to reduce particle contamination in lubrication systems, industries of the whole world spend millions of dollars each year on the improvement of filtration technology. In this context, by controlling fluid cleanliness, some companies are able to reduce failures rates up to 85 percent. However, in some industries and environments, water is a contaminant more frequently encountered than solid particles, and it is often seen as the primary cause of component failure. Only one percent of water in oil is enough to reduce life expectancy of a journal bearing by 80 percent. For rolling bearing elements, the situation is worse because water destroys the oil film and, under the extreme temperatures and pressures generated in the load zone of a rolling bearing element, free and emulsified water can result in instantaneous flash-vaporization giving origin to erosive wear. This work studies the effect of water as lubricant contaminant in ball bearings, which simulates a situation that could actually occur in real systems. In a designed bench test, three basic lubricants of different viscosities were contaminated with different contents of water. The results regarding oil and vibration analysis are presented for different bearing speeds.

Avaliação da aplicação e do desenvolvimento do programa 5 s no setor de manutenção industrial de uma usina de processamento de cana-de-açúcar

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Estudo experimental da remoção, por jato de ar comprimido, de detritos na superfície de corte de rebolo diamantado durante a retificação da alumina refrigerada pela técnica MQL

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fatores causais do grau de limpeza de vacas leiteiras e suas relações com a contagem de células somáticas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação clínica e micológica de pacientes portadores de prótese total superior

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Propriedades químico-mineralógicas e cerâmicas de rochas da formação Corumbataí: aplicação na diversificação de produtos

Pós-graduação em Geologia Regional - IGCE

Estudo da emissão e do controle dos gases e particulados provenientes da queima de biomassa

Pós-graduação em Engenharia Mecânica - FEG

Implementação da metodologia TPM em uma indústria do setor de higiene pessoal, saúde e beleza

This work presents a project of Action Search in a consumption industry of the sector of personal care, health and beauty. Following the implementation steps of Autonomous Maintenance Pillar of TPM methodology, stands for Total Productive Maintenance, this work aims to ensure the advancement of some machines in a production line of the company to the next steps of the methodology implementation, demonstrating the results achieved by the TPM. In the company in question, the TPM has been implemented in the past but lost strength over the years and some of its concepts were abandoned, producing then a drop in the equipments efficiency, increased wastes and breaks in the processes, as well as loss in product quality. Then, the need arose to restart the implementation process from the beginning, to strictly follow all the steps of the methodology, ensuring increased efficiency of equipment and processes. Through training and a changing in the company culture, it was possible a joint effort between Operation and Maintenance in order to enhance the knowledge of the operators on their machines. Initially, it was developed a general cleanliness program of equipments so that it could be possible to find the anomalies in the process. Subsequently, operators and maintainers were trained to detect anomalies, enabling equipments to work under their basic conditions of operation and subsequently building provisional standards of equipment cleaning, lubrication and inspection. Through the improvement presented by some indicators such as OEE, wastes, bankruptcies and unavailability, it was proved the importance and the positive effects of TPM implementation in manufacturing

Estudo das condições de preparo da merenda escolar em creches

Foods are susceptible to be contaminated with several etiologic agents, which can lead to the development of illnesses, triggered by pathogenic microorganisms or their toxins. Food prepared and improperly stored can be the diseases vehicle. This study aimed at evaluating the sanitary conditions in preparing free school meals in the nursery schools, located in a city of the state of São Paulo. This study was conducted by performing microbiological analyses of samples collected from hands of workers responsible for preparing food, and of the water samples used for cleansing and preparing foods. The kitchen physical, structural and cleaning conditions were assessed by means of a checklist. This study analyzed 31 samples from worker hands swab, and 21 samples of water collected from three school kitchens. This study pointed out that the food handlers training should be improved, and a peremptory control of the water used for food preparation purpose should be established. Also, this study showed that the evaluated schools maintain the respective kitchens in a good standard of conservation and cleanliness.

Prevalence of ectoparasites and bacteriological diagnosis in Nile tilapia bred in net-tanks in the Corvo's river, Parana, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Study of combustion of different biomass and its atmospheric emissions

One of the energy alternatives that provide utility, flexibility, cleanliness and economy is biomass, such as forest waste (wood) and agricultural (sugarcane bagasse, rice husks, coffee pods, etc.). However, with its increasing supply and use grows also the concern of industries to invest in monitoring and control of emissions into the atmosphere, because during biomass burning are emitted as exhaust gases, fine particles known as particulates, which greatly contribute to the triggering of serious health problems to humans, in addition to the environmental damage. With that, this work aimed to conduct a monitoring of particulate and gaseous pollutants emissions to the atmosphere from the burning of various types of biomass used by industries. The equipment used for sampling were the optical monitor DataRAM 4 and the Unigas3000 + gas sampler. The results showed that biomass coffee pods presented the greatest concentration of particulates (485119 μg m-3) with particle diameters between 0.0602 μm and 0.3502 μm, i.e. the most ultrafine particles, harmful to human health and the environment. The largest emissions of CO and NOx were observed, respectively, for the coffee pods (3500 ppm) and for the rice husk (48 ppm). As for the superior calorific value (PCS), the best of fuel, with higher PCS, was the Eucalyptus grandis.

RB32-270 A Seven Year Study of a Milk Supply

The amount of butter produced by the grain-belt states is evidence that a great many cows are milked by the midwestern farmer. Most of this milk is separated on the farm, the cream is sold, and the skimmilk is fed to hogs and other livestock. As the market for fluid milk has developed, many farmers near the cities have turned to the sale of milk, because it affords a better return for the butterfat sold. Much of the milk produced for sale as fluid milk is produced under practically the same conditions as milk which is produced primarily for the same of cream. The Department of Dairy Husbandry of the University of Nebraska, in conducting its instructional and investigational work, comes in contact with the milk producer. An effort has been made, therefore, to study the relation of milk quality to farm conditions as found among the milk producers or patrons who have delivered milk to the department. The study was carried on in an effort to find possible ways of bettering the conditions without upsetting the economic balance existing between the production of cream and fluid milk.

A Qualitative Analysis of Youth Feedback of Nutrition School Enrichment Kits in Lincoln, NE

A Qualitative Analysis of Youth Feedback of Nutrition School Enrichment Kits in Lincoln, NE Richard A. Losey, M.S. University of Nebraska, 2010 Advisor: Wanda M. Koszewski The qualitative analysis of the responses given by students participating in classrooms that used the Nutrition Education Program‟s (NEP) school enrichment kits was the primary focus of this research. Data was collected from the participants in written form. Three major themes appeared during analysis of the data, healthy eating habits, cleanliness and change. The theme of healthy eating habits is comprised of the following sub-themes: breakfast, nutrients, label reading, Food Guide Pyramid/MyPyramid and healthy snacks. Cleanliness is comprised of hand washing and food safety sub-themes. The change theme is made up of change in healthy eating habits, change in cleanliness and change in both healthy eating habits and cleanliness. The data suggests that participating students have made or intend to make changes regarding healthy eating habits and cleanliness, which is the goal of nutrition education. The students‟ responses indicate that the NEP school enrichment kits are effective in increasing the knowledge of students and promoting healthy lifestyle changes.

Viscosity of egg white from hens of different strains fed with commercial and natural additives

Yolk color and egg white (albumen) cleanliness and viscosity are important parameters by which consumers judge the quality of eggs. This study aimed to investigate changes in albumen viscosity during storage of eggs for up to 36 days from two different commercial laying hen strains (Carijo Barbada and Isa Brown) fed a diet containing annatto (1.5 and 2.0%) or a synthetic additive without synthetic colorants (control). Analyses of humidity, albumen height, pH, viscosity, foam formation, and stability were carried out on eggs. Carijo Barbada strain had smaller albumen, lower humidity and higher egg white viscosity than Isa Brown strain; however, with storage, viscosity lowered significantly on both strains. Initially, the addition of 2.0% of annatto or a synthetic additive increased viscosity in both strains, but with storage only the control maintained longer viscosity. Lower viscosity did not change foam density and stability.