Adaptation of agriculture to climate change in Quebec : the co-construction of agricultural policies in the RCM of Haut-Richelieu

Les facteurs climatiques ainsi bien que les facteurs non-climatiques doivent être pris en considération dans le processus d'adaptation de l'agriculture aux changements et à la variabilité climatiques (CVC). Ce changement de paradigme met l'agent humain au centre du processus d'adaptation, ce qui peut conduire à une maladaptation. Suite aux débats sur les changements climatiques qui ont attiré l'attention scientifique et publique dans les années 1980 et 1990, l'agriculture canadienne est devenue un des points focaux de plusieurs études pionnières sur les CVC, un phénomène principalement dû à l’effet anthropique. Pour faire face aux CVC, ce n’est pas seulement la mitigation qui est importante mais aussi l’adaptation. Quand il s'agit de l'adaptation, c'est plutôt la variabilité climatique qui nous intéresse que simplement les augmentations moyennes des températures. L'objectif général de ce mémoire de maîtrise est d'améliorer la compréhension des processus d'adaptation et de construction de la capacité d'adaptation ai niveau de la ferme et de la communauté agricole à travers un processus ascendant, c’est-à-dire en utilisant l'approche de co-construction (qui peut également être considéré comme une stratégie d'adaptation en soi), pour développer une gestion et des outils de planification appropriés aux parties prenantes pour accroître ainsi la capacité d'adaptation de la communauté agricole. Pour y arriver, l'approche grounded theory est utilisée. Les résultats consistent de cinq catégories interdépendantes de codes élargis, conceptuellement distinctes et avec un plus grand niveau d'abstraction. La MRC du Haut-Richelieu a été choisie comme étude de cas en raison de plusieurs de ses dimensions agricoles, à part de ses conditions biophysiques favorables. 15 entrevues ont été menées avec les agriculteurs. Les résultats montrent que si certains agriculteurs ont reconnu les côtés positifs et négatifs des CVC, d’autres sont très optimistes à ce sujet comme se ils ne voient que le côté positif; d'où la nécessité de voir les deux côtés des CVC. Aussi, il y a encore une certaine incertitude liée aux CVC, qui vient de la désinformation et la désensibilisation des agriculteurs principalement en ce qui concerne les causes des CVC ainsi que la nature des événements climatiques. En outre, et compte tenu du fait que l'adaptation a plusieurs caractéristiques et types, il existe de nombreux types d'adaptation qui impliquent à la fois l'acteur privé et le gouvernement. De plus, les stratégies d'adaptation doivent être élaborées conjointement par les agriculteurs en concert avec d'autres acteurs, à commencer par les agronomes, car ils servent en tant que relais important entre les agriculteurs et d'autres parties prenantes telles que les institutions publiques et les entreprises privées.

Effect of curing temperature , fibre loading and bonding agent on the equilibrium swelling of isora-natural rubbercomposites

Isora fibre-reinforced natural rubber (NR) composites were cured at 80, 100, 120 and 150°C using a low temperature curing accelerator system. Composites were also prepared using a conventional accelerator system and cured at 150°C. The swelling behavior of these composites at varying fibre loadings was studied in toluene and hexane. Results show that the uptake of solvent and volume fraction of rubber due to swelling was lower for the low temperature cured vulcanizates which is an indication of the better fibre/rubber adhesion. The uptake of aromatic solvent was higher than that of aliphatic solvent, for all the composites. As the fibre content increased, the solvent uptake decreased, due to the superior solvent resistance of the fibre and good fibre-rubber interactions. The bonding agent improved the swelling resistance of the composites due to the strong interfacial adhesion. Due to the improved adhesion between the fibre and rubber, the ratio of the change in volume fraction of rubber due to swelling to the volume fraction of rubber in the dry sample (V,) was found to decrease in the presence of bonding agent. At a fixed fibre loading, the alkali treated fibre composite showed a lower percentage swelling than untreated one for both systems showing superior rubber-fibre interactions.

Men change, and museums change

This text was written for the 3rd Meeting of the Seminar on Social Museology, which took place at the Museu do Homem do Nordeste [Museum of the North-eastern Man], in Recife, Pernambuco, Brazil, in May 2010. It is important to explain that the Seminar on Social Museology is a monthly cycle of theoretical debates organized with the aim of gathering the necessary contributions to put together a new museological model which can indeed be compatible with the practice and its end activity – to institutionally represent the culture of the north-eastern region – and also with the practice of the role of social agent henceforth given Museums by New Museology in Brazil. To these objectives one can add that of legitimizing the museum before its peers and the museological community understood here as partners of its end activity, which is that of representing the North-eastern Man, a task that can only be feasible if socialized.

Multi-agent collaboration for decision support in shared zones of intelligent buildings

In domain of intelligent buildings, saving energy in buildings and increasing preferences of occupants are two important factors. These factors are the important keys for evaluating the performance of work environment. In recent years, many researchers combine these areas to create the system that can change from original to the modern work environment called intelligent work environment. Due to advance of agent technology, it has received increasing attention in the area of intelligent pervasive environments. In this paper, we review several issues in intelligent buildings, with respect to the implementation of control system for intelligent buildings via multi-agent systems. Furthermore, we present the MASBO (Multi-Agent System for Building cOntrol) that has been implemented for controlling the building facilities to reach the balancing between energy efficiency and occupant’s comfort. In addition to enhance the MASBO system, the collaboration through negotiation among agents is presented.

Pollination and other ecosystem services produced by mobile organisms: a conceptual framework for the effects of land-use change

Many ecosystem services are delivered by organisms that depend on habitats that are segregated spatially or temporally from the location where services are provided. Management of mobile organisms contributing to ecosystem services requires consideration not only of the local scale where services are delivered, but also the distribution of resources at the landscape scale, and the foraging ranges and dispersal movements of the mobile agents. We develop a conceptual model for exploring how one such mobile-agent-based ecosystem service (MABES), pollination, is affected by land-use change, and then generalize the model to other MABES. The model includes interactions and feedbacks among policies affecting land use, market forces and the biology of the organisms involved. Animal-mediated pollination contributes to the production of goods of value to humans such as crops; it also bolsters reproduction of wild plants on which other services or service-providing organisms depend. About one-third of crop production depends on animal pollinators, while 60-90% of plant species require an animal pollinator. The sensitivity of mobile organisms to ecological factors that operate across spatial scales makes the services provided by a given community of mobile agents highly contextual. Services vary, depending on the spatial and temporal distribution of resources surrounding the site, and on biotic interactions occurring locally, such as competition among pollinators for resources, and among plants for pollinators. The value of the resulting goods or services may feed back via market-based forces to influence land-use policies, which in turn influence land management practices that alter local habitat conditions and landscape structure. Developing conceptual models for MABES aids in identifying knowledge gaps, determining research priorities, and targeting interventions that can be applied in an adaptive management context.

6,6 '-bis (5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-benzo[1,2,4]triazin-3-yl) [2,2 ']bipyridine, an effective extracting agent for the separation of americium(III) and curium(III) from the lanthanides

The extraction of americium(III), curium(III), and the lanthanides(III) from nitric acid by 6,6'- bis (5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-benzo[1,2,4]triazin-3-yl)-[2,2'] bipyridine (CyMe4-BTBP) has been studied. Since the extraction kinetics were slow, N,N'-dimethyl-N,N'-dioctyl-2-(2-hexyloxy-ethyl)malonamide (DMDOHEMA) was added as a phase transfer reagent. With a mixture of 0.01 M CyMe4-BTBP + 0.25 M DMDOHEMA in n -octanol, extraction equilibrium was reached within 5 min of mixing. At a nitric acid concentration of 1 M, an americium(III) distribution ratio of approx. 10 was achieved. Americium(III)/lanthanide(III) separation factors between 50 (dysprosium) and 1500 (lanthanum) were obtained. Whereas americium(III) and curium(III) were extracted as disolvates, the stoichiometries of the lanthanide(III) complexes were not identified unambiguously, owing to the presence of DMDOHEMA. In the absence of DMDOHEMA, both americium(III) and europium(III) were extracted as disolvates. Back-extraction with 0.1 M nitric acid was thermodynamically possible but rather slow. Using a buffered glycolate solution of pH=4, an americium(III) distribution ratio of 0.01 was obtained within 5 min of mixing. There was no evidence of degradation of the extractant, for example, the extraction performance of CyMe4-BTBP during hydrolylsis with 1 M nitric acid did not change over a two month contact.

Conceptualizing change in the Portuguese footwear industry: regional voices and cognitive spaces of agency

Expanding national services sectors and global competition aggravate current and perceived future market pressures on traditional manufacturing industries. These perceptions of change have provoked a growing intensification of geo-political discourses on technological innovation and ‘learning’, and calls for competency in design among other professional skills. However, these political discourses on innovation and learning have paralleled public concerns with the apparent ‘growth pains’ from factory closures and subsequent increases in unemployment, and its debilitating social and economic implications for local and regional development. In this respect the following investigation sets out to conceptualize change through the complementary and differing perceptions of industry and regional actors’ experiences or narratives, linking these perceptions to their structure-determined spheres of agent-environment interactivity. It aims to determine whether agents’ differing perceptions of industry transformation can have a role in the legitimization of their interests in, and in sustaining their organizational influence over the process of industry-regional transformation. It argues that industry and regional agent perceptions are among the cognitive aspects of agent-environment interactivity that permeate agency. It stresses agents’ ability to reason and manipulate their work environments to preserve their self-regulating interests in, and task representative influence over the multi-jurisdictional space of industry-regional transformation. The contributions of this investigation suggest that agents’ varied perceptions of industry and regional change inform or compete for influence over the redirection of regional, industry and business strategies. This claim offers a greater appreciation for the reflexive and complex institutional dimensions of industry planning and development, and the political responsibility to socially just forms of regional development. It positions the outcomes of this investigation at the nexus of intensifying geo-political discourses on the efficiency and equity of territorial development in Europe.

Technological change and the challenges for regional development: building social capital in less-favoured regions

The relevance of regional policy for less favoured regions (LFRs) reveals itself when policy-makers must reconcile competitiveness with social cohesion through the adaptation of competition or innovation policies. The vast literature in this area generally builds on an overarching concept of ‘social capital’ as the necessary relational infrastructure for collective action diversification and policy integration, in a context much influenced by a dynamic of industrial change and a necessary balance between the creation and diffusion of ‘knowledge’ through learning. This relational infrastructure or ‘social capital’ is centred on people’s willingness to cooperate and ‘envision’ futures as a result of “social organization, such as networks, norms and trust that facilitate action and cooperation for mutual benefit” (Putnam, 1993: 35). Advocates of this interpretation of ‘social capital’ have adopted the ‘new growth’ thinking behind ‘systems of innovation’ and ‘competence building’, arguing that networks have the potential to make both public administration and markets more effective as well as ‘learning’ trajectories more inclusive of the development of society as a whole. This essay aims to better understand the role of ‘social capital’ in the production and reproduction of uneven regional development patterns, and to critically assess the limits of a ‘systems concept’ and an institution-centred approach to comparative studies of regional innovation. These aims are discussed in light of the following two assertions: i) learning behaviour, from an economic point of view, has its determinants, and ii) the positive economic outcomes of ‘social capital’ cannot be taken as a given. It is suggested that an agent-centred approach to comparative research best addresses the ‘learning’ determinants and the consequences of social networks on regional development patterns. A brief discussion of the current debate on innovation surveys has been provided to illustrate this point.

An overview of domestic energy models and a new approach with agent based modelling

Government targets for CO2 reductions are being progressively tightened, the Climate Change Act set the UK target as an 80% reduction by 2050 on 1990 figures. The residential sector accounts for about 30% of emissions. This paper discusses current modelling techniques in the residential sector: principally top-down and bottom-up. Top-down models work on a macro-economic basis and can be used to consider large scale economic changes; bottom-up models are detail rich to model technological changes. Bottom-up models demonstrate what is technically possible. However, there are differences between the technical potential and what is likely given the limited economic rationality of the typical householder. This paper recommends research to better understand individuals’ behaviour. Such research needs to include actual choices, stated preferences and opinion research to allow a detailed understanding of the individual end user. This increased understanding can then be used in an agent based model (ABM). In an ABM, agents are used to model real world actors and can be given a rule set intended to emulate the actions and behaviours of real people. This can help in understanding how new technologies diffuse. In this way a degree of micro-economic realism can be added to domestic carbon modelling. Such a model should then be of use for both forward projections of CO2 and to analyse the cost effectiveness of various policy measures.

Urban climates and global climate change

Cities and global climate change are closely linked: cities are where the bulk of greenhouse gas emissions take place through the consumption of fossil fuels; they are where an increasing proportion of the world’s people live; and they also generate their own climate – commonly characterized by the urban heat island. In this way, understanding the way cities affect the cycling of energy, water, and carbon to create an urban climate is a key element of climate mitigation and adaptation strategies, especially in the context of rising global temperatures and deteriorating air quality in many cities. As climate models resolve finer spatial-scales, they will need to represent those areas in which more than 50% of the world’s population already live to provide climate projections that are of greater use to planning and decision-making. Finally, many of the processes that are instrumental in determining urban climate are the same factors leading to global anthropogenic climate change, namely regional-scale land-use changes; increased energy use; and increased emissions of climatically-relevant atmospheric constituents. Cities are therefore both a case study for understanding, and an agent in mitigating, anthropogenic climate change. This chapter reviews and summarizes the current state of understanding of the physical basis of urban climates, as well as our ability to represent these in models. We argue that addressing the challenges of managing urban environments in a changing climate requires understanding the energy, water, and carbon balances for an urban landscape and, importantly, their interactions and feedbacks, together with their links to human behaviour and controls. We conclude with some suggestions for where further research is needed.

Bank networks and firm credit: an agent based model approach

Starting from the idea that economic systems fall into complexity theory, where its many agents interact with each other without a central control and that these interactions are able to change the future behavior of the agents and the entire system, similar to a chaotic system we increase the model of Russo et al. (2014) to carry out three experiments focusing on the interaction between Banks and Firms in an artificial economy. The first experiment is relative to Relationship Banking where, according to the literature, the interaction over time between Banks and Firms are able to produce mutual benefits, mainly due to reduction of the information asymmetry between them. The following experiment is related to information heterogeneity in the credit market, where the larger the bank, the higher their visibility in the credit market, increasing the number of consult for new loans. Finally, the third experiment is about the effects on the credit market of the heterogeneity of prices that Firms faces in the goods market.

Experience generalization for multi-agent reinforcement learning

On-line learning methods have been applied successfully in multi-agent systems to achieve coordination among agents. Learning in multi-agent systems implies in a non-stationary scenario perceived by the agents, since the behavior of other agents may change as they simultaneously learn how to improve their actions. Non-stationary scenarios can be modeled as Markov Games, which can be solved using the Minimax-Q algorithm a combination of Q-learning (a Reinforcement Learning (RL) algorithm which directly learns an optimal control policy) and the Minimax algorithm. However, finding optimal control policies using any RL algorithm (Q-learning and Minimax-Q included) can be very time consuming. Trying to improve the learning time of Q-learning, we considered the QS-algorithm. in which a single experience can update more than a single action value by using a spreading function. In this paper, we contribute a Minimax-QS algorithm which combines the Minimax-Q algorithm and the QS-algorithm. We conduct a series of empirical evaluation of the algorithm in a simplified simulator of the soccer domain. We show that even using a very simple domain-dependent spreading function, the performance of the learning algorithm can be improved.

Microhardness change of enamel due to bleaching with in-office bleaching gels of different acidity

Objective. The aim of this study was to assess the enamel microhardness treated with three in-office bleaching agents, containing 35% hydrogen peroxide with different acidity. Materials and methods. Bovine incisors were divided into three groups that received the following bleaching agents: Whiteness HP, Total Bleach and Opalescence Xtra. Three gel applications/10-min each, totaling 30-min of bleaching treatment, were made on the teeth and activated with a blue LED (1000 mW/470 nm) combined to a LASER (120 mW/795 nm) device (Easy Bleach-Clean Line). Vickers hardness (VH) was evaluated at baseline and after the bleaching procedure. The values of Hardness loss [HNL] (% reduction) were calculated. The two-sample t-test was used for comparison of the HNL of the three bleaching products (5% level of significance). Results. The Opalescence Xtra, which had the lowest pH value (pH = 4.30), showed a significant increase of HNL when compared with Total Bleach bleaching agent, which had the highest pH value (pH = 6.62). Conclusions. The 35% hydrogen peroxide bleaching agents resulted in a reduction in surface enamel microhardness and bleaching with the most acid agent resulted in a significant enamel hardness loss compared to the less acid agent (4.30 vs 6.62). Strategies proposed to reduce the enamel loss after bleaching treatment may include the use of daily fluoride therapy, mouth rinsing (fluoride, milk and sodium bicarbonate solution), fluoride/bicarbonate dentifrices without abrasives, do not toothbrush immediately after bleaching, fluorides and calcium add to bleaching agents.

Evaluation of dimensional change and detail reproduction in silicones for facial prostheses.

The aim of this study was to evaluate the dimensional stability and detail reproduction of two silicones used for facial prosthesis, under the influence of chemical disinfection and storage time. Twenty-eight test specimens were obtained, half made of Silastic MDX 4-4210 silicone, and the other half of Silastic 732 RTV silicone. The test specimens were divided into 4 groups: Silastic 732 RTV and Silastic MDX 4-4210, with disinfection 3 times a week with Efferdent and without disinfection. Dimensional change was analyzed using an electronic comparison microscope and detail reproduction was observed under a stereo microscope, immediately and 2 months after the test specimens were made. Once the results were obtained, an analisis of variance (ANOVA) was applied, followed by the Tukey's Test with 1% confidence. The storage time factor had a statistical influence on dimensional stability: Silastic MDX 4-4210 had less contraction than Silastic 732 RTV. Chemical disinfection did not significantly alter the dimensional stability of the materials used. Regarding detail reproduction, no alteration of values was observed in any of the materials analyzed, regardless of storage period or disinfection.

Clinical Trial Evaluating Color Change and Tooth Sensitivity Throughout and Following In-office Bleaching

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)