Análise de ciclo avançado com seqüestro de carbono

The energy is considered one of the most important elements in the human´s life providing the survival as well as the well being. Nowadays, the technologies destined to generate power burn fossil fuels which pour gases (carbon dioxide among them) that contribute to the global warming phenomenon. Several research groups and universities have been studying different methods for generating power with low carbon dioxide emissions, including the possibility of burning zero-carbon fuels. In this text, it has been put attention to the Advanced Zero Emission Power Plants (AZEP) which separate the CO2 (from the gases involved in the power generation), compress it, dehydrate it and store it in appropriate reservoirs. The goal of this study was to find a possible solution to produce CO from CO2, activated by solar energy; the reaction between CO and steam generates a syngas comprised of H2 and CO2, which can be separated by chemical and/or physical processes. The text also contains a study concerning the compressed air energy storage power plant (CAES) and come up with its modification to C[CO2]ES. This power plant stores CO2 directing it to a reverse combustion process to produce CO which is headed to a syngas reactor to produce CO2 and H2. Hydrogen is separated and carried to the thermal cycle to generate power with low carbon emissions

Estudo da reação de dissolução de serpentinitos brasileiros para uso em processo de captura de carbono

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise termoeconômica e eficiência ecológica de uma termoelétrica com absorção química de CO2

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Thermal decomposition kinetics of Brazilian limestones: effect of CO2 partial pressure

The influence of the partial pressure of carbon dioxide (CO2) on the thermal decomposition process of a calcite (CI) and a dolomite (DP) is investigated in this paper using a thermogravimetric analyser. The tests were non-isothermal at five different heating rates in dynamic atmosphere of air with 0% and 15% carbon dioxide (CO2). In the atmosphere without CO2, the average activation energies (E-alpha) were 197.4 kJ mol(-1) and 188.1 kJ mol(-1) for CI and DP, respectively. For the DP with 15% CO2, two decomposition steps were observed, indicating a change of mechanism. The values of E-alpha for 15% CO2 were 378.7 kJ mol(-1) for the CI, and 299.8 kJ mol(-1) (first decomposition) and 453.4 kJ mol(-1) (second decomposition) for the DP, showing that the determination of E-alpha for DP should in this case be considered separately in those two distinct regions. The results obtained in this study are relevant to understanding the behaviour changes in the thermal decomposition of limestones with CO2 partial pressure when applied to technologies, such as carbon capture and storage (CCS), in which carbon dioxide is present in high concentrations.

Mitigazione sequestro e stoccaggio di diossido di carbonio

The main objective of my thesis was the technical-economic feasibility of a system of electricity generation integrated with CCS. The policy framework for development processing is part of the recent attention that at the political level has been directed towards the use of CCS technologies with the aim of addressing the problems of actual climate change. Several technological options have been proposed to stabilize and reduce the atmospheric concentrations of carbon dioxide (CO2) among which, the most promising for IPPC (Intergovernmental Panel on Climate Change)are the CCS technologies (Carbon Capture and Storage & Carbon Capture and Sequestration). The remedy proposed for large stationary CO2 sources as thermoelectric power plants is to separate the flue gas capturing CO2 and to store it into deep subsurface geological formations (more than 800 meters of depth). In order to support the identification of potential CO2 storage reservoirs in Italy and in Europe by Geo Capacity(an European database) new studies are developing. From the various literature data analyzed shows that most of the CO2 emitted from large stationary sources comes from the processes of electricity generation (78% of total emissions) and from (about 60%) those using coal especially. The CCS have the objective of return "to the sender" , the ground, the carbon in oxidized form (CO2) after it has been burned by man starting from its reduced form (CH4, oil and coal), then the carbon dioxide is not a "pollutant" if injected into the subsurface, CO2 is an acid reagent that interacts with the rock, with underground fluid and the characteristics of the host rock. The results showed that the CCS technology are very urgent, because unfortunately there are too many industrial sources of CO2 in assets (power plants, refineries, cement plants, steel mills) in the world who are carrying too quickly the CO2 atmospheric concentration levels to values that aren't acceptable for our dear planet.

Studio del metodo dell'assorbimento diretto della CO2 per l'analisi del radiocarbonio

L’attuale rilevanza rappresentata dalla stretta relazione tra cambiamenti climatici e influenza antropogenica ha da tempo posto l’attenzione sull’effetto serra e sul surriscaldamento planetario così come sull’aumento delle concentrazioni atmosferiche dei gas climaticamente attivi, in primo luogo la CO2. Il radiocarbonio è attualmente il tracciante ambientale per eccellenza in grado di fornire mediante un approccio “top-down” un valido strumento di controllo per discriminare e quantificare il diossido di carbonio presente in atmosfera di provenienza fossile o biogenica. Ecco allora che ai settori applicativi tradizionali del 14C, quali le datazioni archeometriche, si affiancano nuovi ambiti legati da un lato al settore energetico per quanto riguarda le problematiche associate alle emissioni di impianti, ai combustibili, allo stoccaggio geologico della CO2, dall’altro al mercato in forte crescita dei cosiddetti prodotti biobased costituiti da materie prime rinnovabili. Nell’ambito del presente lavoro di tesi è stato quindi esplorato il mondo del radiocarbonio sia dal punto di vista strettamente tecnico e metodologico che dal punto di vista applicativo relativamente ai molteplici e diversificati campi d’indagine. E’ stato realizzato e validato un impianto di analisi basato sul metodo radiometrico mediante assorbimento diretto della CO2 ed analisi in scintillazione liquida apportando miglioramenti tecnologici ed accorgimenti procedurali volti a migliorare le performance del metodo in termini di semplicità, sensibilità e riproducibilità. Il metodo, pur rappresentando generalmente un buon compromesso rispetto alle metodologie tradizionalmente usate per l’analisi del 14C, risulta allo stato attuale ancora inadeguato a quei settori applicativi laddove è richiesta una precisione molto puntuale, ma competitivo per l’analisi di campioni moderni ad elevata concentrazione di 14C. La sperimentazione condotta su alcuni liquidi ionici, seppur preliminare e non conclusiva, apre infine nuove linee di ricerca sulla possibilità di utilizzare questa nuova classe di composti come mezzi per la cattura della CO2 e l’analisi del 14C in LSC.

Studying the effect of CO2-induced acidification on sediment toxicity using acute amphipod toxicity test

Carbon capture and storage is increasingly being considered one of the most efficient approaches to mitigate the increase of CO2 in the atmosphere associated with anthropogenic emissions. However, the environmental effects of potential CO2 leaks remain largely unknown. The amphipod Ampelisca brevicornis was exposed to environmental sediments collected in different areas of the Gulf of Cádiz and subjected to several pH treatments to study the effects of CO2-induced acidification on sediment toxicity. After 10 days of exposure, the results obtained indicated that high lethal effects were associated with the lowest pH treatments, except for the Ría of Huelva sediment test. The mobility of metals from sediment to the overlying seawater was correlated to a pH decrease. The data obtained revealed that CO2-related acidification would lead to lethal effects on amphipods as well as the mobility of metals, which could increase sediment toxicity.

Escenario de potenciales tecnologías limpias de carbón y evaluación de las iniciativas dereducción de CO2 en su aproximación a centrales de generación eléctrica de emisiones cero

Dentro del objetivo común que persigue alcanzar una estabilidad social y una economía de éxito sostenible en el actual e incierto contexto mundial, el pronóstico es que la demanda de energía siga aumentando y que la generación mundial de electricidad se duplique entre los años 2005 y 2030. En este escenario, los combustibles fósiles podrían mantener una contribución muy significativa al mix energético posiblemente hasta el año 2050, participando del mercado de generación de energía eléctrica mundial en aproximadamente un 70% y siendo base de la generación de energía eléctrica europea en un 60%. El carbón sin duda seguirá teniendo una contribución clave. Este incremento en la demanda energética y energía eléctrica, en el consumo de carbón y de combustibles fósiles en general, sin duda tendrá impacto sobre los niveles de concentración de CO2 a nivel global en los diferentes escenarios evaluados, con un fatal pronóstico de triplicar, si no se contiene de alguna manera su emisión, los niveles actuales de concentración de CO2 hasta valores próximos a 1.200 ppm para finales de este siglo XXI. El Protocolo de Kyoto, adoptado en 1997, fue el primer tratado de responsabilidad a nivel mundial para el monitoreo y limitación de las emisiones de CO2, realizando una primera aproximación hasta el año 2012 y tomando como valores de referencia los referidos a los niveles de concentración de gases de efecto invernadero registrados en 1990. Algunos de los principales países emisores de CO2 como USA y China no ratificaron los objetivos de límite de emisión y niveles de reducción de CO2, y sin embargo están tomando sus propias acciones y medidas en paralelo para reducir sus emisiones. Los procesos de combustión más eficientes y con menor consumo de combustible, proporcionan una significativa contribución del sector de generación eléctrica a la reducción de los niveles de concentración de CO2, pero podría no ser suficiente. Tecnologías de captura y almacenamiento de carbono (CCS, del inglés Carbon Capture and Storage) han comenzado a ganar más importancia desde principios de esta década, se ha intensificado la investigación y proliferado la creación de fondos que impulsen su desarrollo y estimulen su despliegue. Tras los primeros proyectos de investigación básica y ensayos a pequeña escala, casi embrionaria, tres procesos de captura se posicionan como los más viables actualmente, con potencial para alcanzar niveles de reducción de CO2 del 90%, mediante su aplicación en centrales de carbón para generación eléctrica. En referencia al último paso del esquema CCS en el proceso de reducción de las ingentes cantidades de CO2 que habría que eliminar de la atmósfera, dos opciones deberían ser consideradas: la reutilización (EOR y EGR) y el almacenamiento. El presente artículo evalúa el estado de las diferentes tecnologías de captura de CO2, su disponibilidad, su desarrollo y su coste de instalación estimado. Se incorpora un pequeño análisis de los costes de operación y varias extrapolaciones, dado que solo están disponibles algunos de estos datos hasta la fecha. Además este artículo muestra los principales hallazgos y los potenciales de reducción de emisiones de CO2 en la utilización del carbón para generar electricidad y proporciona una visión del desarrollo y despliegue actual de la tecnología. Se realiza una revisión de las iniciativas existentes a nivel mundial mediante proyectos de demostración orientados a la viabilidad comercial del esquema CCS para el período 2020 ? 2030. Se evalúan los diferentes programas en curso y sus avances, como el programa de UK, el EEPR (European Energy Program for Recovery), etc. Las principales fuentes empleadas en la elaboración de este artículo son el DOE, NETL, MIT, EPRI, Centros e Institutos de Investigación, Universidades Europeas, Administraciones Públicas y Agencias Internacionales, suministradores de tecnología crítica, compañías eléctricas (utilities) y empresas tecnológicas.

CO2and Rn degassing from the natural analog of Campo de Calatrava(Spain): Implications for monitoring of CO2storage sites

Natural analogs offer a valuable opportunity to investigate the long-term impacts associated with thepotential leakage in geological storage of CO2.Degassing of CO2and radon isotopes (222Rn?220Rn) from soil, gas vents and thermal water dischargeswas investigated in the natural analog of Campo de Calatrava Volcanic Field (CCVF; Central Spain) todetermine the CO2?Rn relationships and to assess the role of CO2as carrier gas for radon. Furthermore,radon measurements to discriminate between shallow and deep gas sources were evaluated under theperspective of their applicability in monitoring programs of carbon storage projects.CO2flux as high as 5000 g m?2d?1and222Rn activities up to 430 kBq m?3were measured;220Rn activi-ties were one order of magnitude lower than those of222Rn. The222Rn/220Rn ratios were used to constrainthe source of the Campo de Calatrava soil gases since a positive correlation between radon isotopic ratiosand CO2fluxes was observed. Thus, in agreement with previous studies, our results indicate a deepmantle-related origin of CO2for both free and soil gases, suggesting that carbon dioxide is an efficientcarrier for Rn. Furthermore, it was ascertained that the increase of222Rn in the soil gases was likely pro-duced by two main processes: (i) direct transport by a carrier gas, i.e., CO2and (ii) generation at shallowlevel due to the presence of relatively high concentrations of dissolved U and Ra in the thermal aquiferof Campo de Calatrava.The diffuse CO2soil flux and radon isotopic surveys carried out in the Campo de Calatrava VolcanicFields can also be applicable to geochemical monitoring programs in CCS (Carbon Capture and Storage)areas as these parameters are useful to: (i) constrain CO2leakages once detected and (ii) monitor both theevolution of the leakages and the effectiveness of subsequent remediation activities. These measurementscan also conveniently be used to detect diffuse leakages.

Nueva tecnología para la separación de gases atmosféricos y captura de dióxido de carbono por aplicación de campos electromagnéticos y fotoionización

Son numerosos los expertos que predicen que hasta pasado 2050 no se utilizarán masivamente las energías de origen renovable, y que por tanto se mantendrá la emisión de dióxido de carbono de forma incontrolada. Entre tanto, y previendo que este tipo de uso se mantenga hasta un horizonte temporal aún más lejano, la captura, concentración y secuestro o reutilización de dióxido de carbono es y será una de las principales soluciones a implantar para paliar el problema medioambiental causado. Sin embargo, las tecnologías existentes y en desarrollo de captura y concentración de este tipo de gas, presentan dos limitaciones: las grandes cantidades de energía que consumen y los grandes volúmenes de sustancias potencialmente dañinas para el medioambiente que producen durante su funcionamiento. Ambas razones hacen que no sean atractivas para su implantación y uso de forma extensiva. La solución planteada en la presente tesis doctoral se caracteriza por la ausencia de residuos producidos en la operación de captura y concentración del dióxido de carbono, por no utilizar substancias químicas y físicas habituales en las técnicas actuales, por disminuir los consumos energéticos al carecer de sistemas móviles y por evitar la regeneración química y física de los materiales utilizados en la actualidad. Así mismo, plantea grandes retos a futuras innovaciones sobre la idea propuesta que busquen fundamentalmente la disminución de la energía utilizada durante su funcionamiento y la optimización de sus componentes principales. Para conseguir el objetivo antes citado, la presente tesis doctoral, una vez establecido el planteamiento del problema al que se busca solución (capítulo 1), del estudio de las técnicas de separación de gases atmosféricos utilizadas en la actualidad, así como del de los sistemas fundamentales de las instalaciones de captura y concentración del dióxido de carbono (capítulo 2) y tras una definición del marco conceptual y teórico (capítulo 3), aborda el diseño de un prototipo de ionización fotónica de los gases atmosféricos para su posterior separación electrostática, a partir del estudio, adaptación y mejora del funcionamiento de los sistemas de espectrometría de masas. Se diseñarán y desarrollarán los sistemas básicos de fotoionización, mediante el uso de fuentes de fotones coherentes, y los de separación electrostática (capítulo 4), en que se basa el funcionamiento de este sistema de separación de gases atmosféricos y de captura y concentración de dióxido de carbono para construir un prototipo a nivel laboratorio. Posteriormente, en el capítulo 5, serán probados utilizando una matriz experimental que cubra los rangos de funcionamiento previstos y aporte suficientes datos experimentales para corregir y desarrollar el marco teórico real, y con los que se pueda establecer y corregir un modelo físico– matemático de simulación (capítulo 6) aplicable a la unidad en su conjunto. Finalmente, debido a la utilización de unidades de ionización fotónica, sistemas láseres intensos y sistemas eléctricos de gran potencia, es preciso analizar el riesgo biológico a las personas y al medioambiente debido al impacto de la radiación electromagnética producida (capítulo 7), minimizando su impacto y cumpliendo con la legislación vigente. En el capítulo 8 se planteará un diseño escalable a tamaño piloto de la nueva tecnología propuesta y sus principales modos de funcionamiento, así como un análisis de viabilidad económica. Como consecuencia de la tesis doctoral propuesta y del desarrollo de la unidad de separación atmosférica y de captura y concentración de dióxido de carbono, surgen diversas posibilidades de estudio que pueden ser objeto de nuevas tesis doctorales y de futuros desarrollos de ingeniería. El capítulo 9 tratará de incidir en estos aspectos indicando líneas de investigación para futuras tesis y desarrollos industriales. ABSTRACT A large number of experts predict that until at least 2050 renewable energy sources will not be massively used, and for that reason, current Primary Energy sources based on extensive use of fossil fuel will be used maintaining out of control emissions, Carbon Dioxide above all. Meanwhile, under this scenario and considering its extension until at least 2050, Carbon Capture, Concentration, Storage and/or Reuse is and will be one of the main solutions to minimise Greenhouse Gasses environmental effect. But, current Carbon Capture and Storage technology state of development has two main problems: it is a too large energy consuming technology and during normal use it produces a large volume of environmentally dangerous substances. Both reasons are limiting its development and its extensive use. This Ph Degree Thesis document proposes a solution to get the expected effect using a new atmospheric gasses separation system with the following characteristics: absence of wastes produced, it needs no chemical and/or physical substances during its operation, it reduces to minimum the internal energy consumptions due to absence of mobile equipment and it does not need any chemical and/or physical regeneration of substances. This system is beyond the State of the Art of current technology development. Additionally, the proposed solution raises huge challenges for future innovations of the proposed idea finding radical reduction of internal energy consumption during functioning, as well as regarding optimisation of main components, systems and modes of operation. To achieve this target, once established the main problem, main challenge and potential solving solutions (Chapter 1), it is established an initial starting point fixing the Atmospheric Gasses Separation and Carbon Capture and Storage developments (Chapter 2), as well as it will be defined the theoretical and basic model, including existing and potential new governing laws and mathematical formulas to control its system functioning (Chapter 3), this document will deal with the design of an installation of an operating system based on photonic ionization of atmospheric gasses to be separated in a later separation system based on the application of electrostatic fields. It will be developed a basic atmospheric gasses ionization prototype based on intense radioactive sources capable to ionize gasses by coherent photonic radiation, and a basic design of electrostatic separation system (Chapter 4). Both basic designs are the core of the proposed technology that separates Atmospheric Gasses and captures and concentrates Carbon Dioxide. Chapter 5 will includes experimental results obtained from an experimental testing matrix covering expected prototype functioning regimes. With the obtained experimental data, theoretical model will be corrected and improved to act as the real physical and mathematical model capable to simulate real system function (Chapter 6). Finally, it is necessary to assess potential biological risk to public and environment due to the proposed use of units of intense energy photonic ionization, by laser beams or by non–coherent sources and large electromagnetic systems with high energy consumption. It is necessary to know the impact in terms of and electromagnetic radiation taking into account National Legislation (Chapter 7). On Chapter 8, an up scaled pilot plant will be established covering main functioning modes and an economic feasibility assessment. As a consequence of this PhD Thesis, a new field of potential researches and new PhD Thesis are opened, as well as future engineering and industrial developments (Chapter 9).

Caracterización de parámetros petrofísicos relacionados con la capacidad de almacenamiento de CO2 en el acuífero salino profundo de Hontomín (Burgos)

La conciencia de la crisis de la modernidad -que comienza ya a finales del siglo XIX- ha cobrado más experiencia debido al conocimiento de los límites del desarrollo económico, ya que como parecía razonable pensar, también los recursos naturales son finitos. En 1972, el Club de Roma analizó las distintas opciones disponibles para conseguir armonizar el desarrollo sostenible y las limitaciones medioambientales. Fue en 1987 cuando la Comisión Mundial para el Medio Ambiente y el Desarrollo de la ONU definía por primera vez el concepto de desarrollo sostenible. Definición que posteriormente fue incorporada en todos los programas de la ONU y sirvió de eje, por ejemplo, a la Cumbre de la Tierra celebrada en Río de Janeiro en 1992. Parece evidente que satisfacer la demanda energética, fundamentalmente desde la Revolución Industrial en el s XIX, trajo consigo un creciente uso de los combustibles fósiles, con la consiguiente emisión de los gases de efecto invernadero (GEI) y el aumento de la temperatura global media terrestre. Esta temperatura se incrementó en los últimos cien años en una media de 0.74ºC. La mayor parte del incremento observado desde la mitad del siglo XX en esta temperatura media se debe, con una probabilidad de al menos el 90%, al aumento observado en los GEI antropogénicos, siendo uno de ellos el CO2 que proviene de la transformación del carbono de los combustibles fósiles durante su combustión. Ante el creciente uso de los combustibles fósiles, los proyectos CAC, proyectos de captura, transporte y almacenamiento, se presentan como una contribución al desarrollo sostenible ya que se trata de una tecnología que permite mitigar el cambio climático. Para valorar si la tecnología CAC es sostenible, habrá que comprobar si existe o no capacidad para almacenar el CO2 en una cantidad mayor a la de producción y durante el tiempo necesario que impone la evolución de la concentración de CO2 en la atmósfera para mantenerla por debajo de las 450ppmv (concentración de CO2 que propone el Panel Intergubernamental para el Cambio Climático). El desarrollo de los proyectos CAC completos pasa por la necesaria selección de adecuados almacenes de CO2 que sean capaces de soportar los efectos de las presiones de inyección, así como asegurar la capacidad de dichos almacenes y la estanqueidad del CO2 en los mismos. La caracterización geológica de un acuífero susceptible de ser almacén de CO2 debe conducir a determinar las propiedades que dicho almacén posee para asegurar un volumen adecuado de almacenamiento, una inyectabilidad del CO2 en el mismo a un ritmo adecuado y la estanqueidad del CO2 en dicho acuífero a largo plazo. El presente trabajo pretende estudiar los parámetros que tienen influencia en el cálculo de la capacidad del almacén, para lo que en primer lugar se ha desarrollado la tecnología necesaria para llevar a cabo la investigación mediante ensayos de laboratorio. Así, se ha desarrollado una patente, "ATAP, equipo para ensayos petrofísicos (P201231913)", con la que se ha llevado a cabo la parte experimental de este trabajo para la caracterización de los parámetros que tienen influencia en el cálculo de la capacidad del almacén. Una vez desarrollada la tecnología, se aborda el estudio de los distintos parámetros que tienen influencia en la capacidad del almacén realizando ensayos con ATAP. Estos ensayos definen el volumen del almacenamiento, llegándose a la conclusión de que en la determinación de este volumen, juegan un papel importante el alcance de los mecanismos trampa, físicos o químicos, del CO2 en el almacén. Ensayos que definen la capacidad del almacén de "aceptar" o "rechazar" el CO2 inyectado, la inyectabilidad, y por último, ensayos encaminados a determinar posibles fugas que se pueden dar a través de los pozos de inyección, definidos estos como caminos preferenciales de fugas en un almacén subterráneo de CO2. Queda de este modo caracterizada la estanqueidad del CO2 en el acuífero a largo plazo y su influencia obvia en la determinación de la capacidad del almacén. Unido al propósito de la estimación de la capacidad del almacén, se encuentra el propósito de asegurar la estanqueidad de dichos almacenes en el tiempo, y adelantarse a la evolución de la pluma de CO2 en el interior de dichos almacenes. Para cumplir este propósito, se ha desarrollado un modelo dinámico a escala de laboratorio, mediante el programa ECLIPSE 300, con el fin de establecer una metodología para el cálculo de la capacidad estimada del almacén, así como el estudio de la evolución de la pluma de CO2 dentro del acuífero a lo largo del tiempo, partiendo de los resultados obtenidos en los ensayos realizados en ATAP y con la modelización de la probeta de roca almacén empleada en dichos ensayos. Presentamos por tanto un trabajo que establece las bases metodológicas para el estudio de la influencia de distintos parámetros petrofísicos en el cálculo de la capacidad del almacén unidos al desarrollo tecnológico de ATAP y su utilización para la determinación de dichos parámetros aplicables a cada acuífero concreto de estudio. ABSTRACT The crisis of modernity –which begins at the end of 19th Century- has been more important due to the knowledge of the limits of economic development, since it appeared to be thought reasonable, the natural resources are finite. In 1972, The Club of Rome analyzed the different options available in order to harmonize the sustainability and the environment development. It was in 1987 when The Global Commission on The Environment and the Development of UN, defined for the first time the concept of Sustainable Development. This definition that was fully incorporated in all the UN programs and it was useful as an axis, for example, in La Cumbre de la Tierra summit in Río de Janeiro in 1992. It seems obvious to satisfy energetic demand, basically after The Industrial Revolution in 19th Century, which represented an increasing use of fossil fuels, therefore greenhouse gases emission and the increasing of global average temperature. This temperature increased in the last 100 years up to 0.74ºC. The major part of the temperature increase is due to the increase observed in Greenhouse gases with human origin, at least with 90% of probability. The most important gas is the CO2 because of its quantity. In the face of the increasing use of fossil fuels, the CCS projects, Carbon Capture and Storage projects, appear as a contribution of sustainable development since it is a technology for avoiding the climate change. In order to evaluate if CCS technology is sustainable, it will be necessary to prove if the capacity for CO2 storage is available or not in a quantity greater than the production one and during the time necessary to keep the CO2 concentration in the atmosphere lower than 450ppmv (concentration imposed by IPCC). The development of full CCS projects goes through the selection of good CO2 storages that are able to support the effects of pressure injection, and assure the capacity of such storages and the watertightness of CO2. The geological characterization of the aquifer that could be potential CO2 storage should lead to determine the properties that such storage has in order to assure the adequate storage volume, the CO2 injectivity in a good rate, and the watertightness of the CO2 in the long term. The present work aims to study the parameters that have influence on the calculation of storage capacity, and for that purpose the appropriate technology has been developed for carrying out the research by mean of laboratory tests. Thus, a patent has been developed, "ATAP, equipo para ensayos petrofísicos (P201231913)", that has been used for developing the experimental part of this work. Once the technology has been developed, the study of different parameters, that have influence on the capacity of the storage, has been addressed developing different tests in ATAP. These tests define the storage volume which is related to the scope of different CO2 trap mechanisms, physical or chemical, in the storage. Tests that define the capacity of the storage to “accept” or “reject” the injected CO2, the injectivity, and tests led to determine possible leakages through injection wells. In this way we could talk about the watertightness in the aquifer in the long term and its influence on the storage capacity estimation. Together with the purpose of the storage capacity estimation, is the purpose of assuring the watertightness of such storages in the long term and anticipating the evolution of CO2 plume inside such aquifers. In order to fulfill this purpose, a dynamic model has been developed with ECLIPSE 300, for stablishing the methodology for the calculation of storage capacity estimation and the evolution of the CO2 plume, starting out with the tests carried out in ATAP. We present this work that establishes the methodology bases for the study of the influence of different petrophysics parameters in the calculation of the capacity of the storage together with the technological development of ATAP and its utilization for the determination of such parameters applicable to each aquifer.

EU 2020 Renewable Energy Goals Insufficient. IES Policy Brief Issue 2012/01/January 2012

Summary. It is clear that any action to combat climate change must involve extensive efforts in reducing the greenhouse gas (GHG) emissions from the energy sector. In the EU, nearly 80% of total GHG emissions come from the energy sector (European Commission, 2011, p. 21). Any credible action within the EU on combating climate change therefore requires deep shifts in the way we produce and use our energy. This paper highlights that renewable energy policies to 2020 are insufficient to meet the EU’s long-term climate policy objectives of reducing GHG emissions by between 80 and 95% by 2050, and thereby aiming to avoid an increase in global temperatures of more than 2°C. Such an ambition would likely require a very high share of renewable energy (in the range of 80 to 100%) in the overall energy mix of the EU, given current uncertainties about the feasibility of potential technological developments (e.g. carbon capture and storage technology).

Table 2 & Appendix A. Properties of operations injecting CO2 into saline aquifers

The experience from CO2 injection at pilot projects (Frio, Ketzin, Nagaoka, US Regional Partnerships) and existing commercial operations (Sleipner, Snøhvit, In Salah, acid-gas injection) demonstrates that CO2 geological storage in saline aquifers is technologically feasible. Monitoring and verification technologies have been tested and demonstrated to detect and track the CO2 plume in different subsurface geological environments. By the end of 2008, approximately 20 Mt of CO2 had been successfully injected into saline aquifers by existing operations. Currently, the highest injection rate and total storage volume for a single storage operation are approximately 1 Mt CO2/year and 25 Mt, respectively. If carbon capture and storage (CCS) is to be an effective option for decreasing greenhouse gas emissions, commercial-scale storage operations will require orders of magnitude larger storage capacity than accessed by the existing sites. As a result, new demonstration projects will need to develop and test injection strategies that consider multiple injection wells and the optimisation of the usage of storage space. To accelerate large-scale CCS deployment, demonstration projects should be selected that can be readily employed for commercial use; i.e. projects that fully integrate the capture, transport and storage processes at an industrial emissions source.

Studio di membrane a base di liquidi ionici per il trasporto facilitato di CO2

In questo lavoro viene effettuata un’analisi di membrane per la separazione di CO2 basate sul meccanismo di trasporto facilitato. Queste membrane sono caratterizzate da un supporto poroso impregnato di una fase liquida le cui proprietà chimico-fisiche vengono presentate in relazione alle performance di separazione fornite: si tratta di liquidi ionici che presentano gruppi funzionali in grado di reagire con la CO2 consentendo il trasporto facilitato del gas acido attraverso la membrana. Le prestazioni in termini di separazione di CO2 da miscele gas fornite da questa tecnologia vengono analizzate e confrontate con quelle offerte da altre tipologie di membrane: alcune basate sul meccanismo di solution-diffusion (membrane polimeriche e membrane impregnate di liquidi ionici room-temperature) ed altre caratterizzate da permeazione di CO2 con presenza di reazione chimica ottenuta mediante facilitatori (mobili o legati allo scheletro carbonioso del polimero costituente la membrana). I risultati ottenuti sono analizzati in merito alla possibile implementazione di tale sistema di separazione a membrana in processi di cattura di CO2 nell'ambito della tecnologia di Carbon Capture and Storage.

Experimental characterization of hydrogen containing flames

The current environmental and socio-economic situation promotes the development of carbon-neutral and sustainable solutions for energy supply. In this framework, the use of hydrogen has been largely indicated as a promising alternative. However, safety aspects are of concern for storage and transportation technologies. Indeed, the current know-how promotes its transportation via pipeline as compressed gas. However, the peculiar properties of hydrogen make the selection of suitable materials challenging. For these reasons, dilution with less reactive species has been considered a short and medium solution. As a way of example, methane-hydrogen mixtures are currently transported via pipelines. In this case, the hydrogen content is limited to 20% in volume, thus keeping the dependence on natural gas sources. On the contrary, hydrogen can be conveniently transported by mixing it with carbon dioxide deriving from carbon capture and storage technologies. In this sense, the interactions between hydrogen and carbon dioxide have been poorly studied. In particular, the effects of composition and operative conditions in the case of accidental release or for direct use in the energy supply chain are unknown. For these reasons, the present work was devoted to the characterization of the chemical phenomena ruling the system. To this aim, laminar flames containing hydrogen and carbon dioxide in the air were investigated experimentally and numerically. Different detailed kinetic mechanisms largely validated were considered at this stage. Significant discrepancies were observed among numerical and experimental data, especially once a fuel consisting of 40%v of hydrogen was studied. This deviation was attributed to the formation of a cellular flame increasing the overall reactivity. Hence, this observation suggests the need for combined models accounting for peculiar physical phenomena and detailed kinetic mechanisms characterizing the hydrogen-containing flames.