In vitro evaluation of combined hyperthermia and photodynamic effects using magnetoliposomes loaded with cucurbit[7]uril zinc phthalocyanine complex on melanoma

The aims of this study were two fold; to develop magnetoliposomes (MLs) loaded with zinc phthalocyanine (ZnPc) complexed with cucurbituril (CB) (CB:ZnPc-MLs) and to evaluate their in vitro photodynamic (PD) and/or hyperthermia (HT) effects while using melanoma cells (B16-F10) as model. The liposomal formulations were characterized by both average diameter and zeta potential. The vesicle average size ranged from 150 to 200 nm and the polydispersity index (PdI) from 0.093 to 0.230. The zeta potential was significantly positive with values between 48 and 57 mV. The cell viability (CV) after PD and HT treatments was assessed by colorimetric MTI method. Melanoma cells were initially treated with the liposome formulation without light and magnetic field application, revealing cell viability not different from the control cells (p > 0.05). Photodynamic and hyperthermia assays were also applied separately, demonstrating that PD is more effective than HT in reducing the CV of the neoplastic cells. Combined application of both PD and HT treatments was even more effective in reducing the CV of B16-F10 cells. At the highest light dose (2 J/cm(2)) and under magnetic field activation the CV was about half than PD applied alone. Therefore, the use of the photosensitizer-loaded magnetoliposome for combined photodynamic therapy (PDT) and magnetohyperthermia (MHT) application can be considered as a potential tool to treat malignant melanoma. (C) 2012 Elsevier B.V. All rights reserved.

CD137-selektierte leukämiereaktive T-Zellen gesunder Spender zur adoptiven Immuntherapie stammzelltransplantierter Leukämiepatienten = CD137-selected leukaemia-reactive T Cells from healthy donors for adoptive immunotherapy in stem-cell-transplanted leukaemia-patients

Bei stammzelltransplantierten Patienten, die ein Rezidiv ihrer Leukämie erleiden, kann eine Donor-Lymphozyten-Infusion (DLI) dauerhafte vollständige Leukämieremissionen induzieren. T-Zellen in der DLI vermitteln sowohl den potentiell kurativen Graft-versus-Leukaemia (GVL) Effekt, als auch die potentiell lebensbedrohliche Graft-versus-Host Disease (GVHD). Hingegen könnte die Infusion von leukämiereaktiven T-Zellen einen selektiven GVL Effekt und einen Langzeitschutz vor Rezidiven durch eine spezifisch gegen die Leukämie gerichtete Immunantwort und Immunität vermitteln. Unsere Arbeitsgruppe hat Protokolle zur in vitro Generierung leukämiereaktiver T-Zellen entwickelt, die hohe zytotoxische Aktivität gegen akute myeloische Leukämie-Blasten (AML) bei minimaler Reaktion auf mögliche GVHD Zielstrukturen zeigen. Für die klinische Anwendung sind diese Protokolle jedoch zu aufwändig, wobei vor allem eine erhebliche Verkürzung der Kulturzeit auf wenige Wochen erforderlich ist. Diese Verkürzung der in vitro Kulturzeit könnte das Wachstum von T-Zellen vom central memory oder frühen effector memory Phänotyp fördern, für die eine bessere in vivo Effektorfunktion und längere Persistenz im Rezipienten verglichen mit T-Zellen aus Langzeitkultur gezeigt werden konnte. Der Aktivierungsmarker und Kostimulations-Rezeptor CD137 kann zur Erkennung und Isolation antigenspezifischer T-Zellen genutzt werden, ohne dass dafür das von den T-Zellen erkannte Peptidepitop bekannt sein muss. Eine CD137-vermittelte Anreicherung mit Hilfe von clinical grade Materialien könnte verwendet werden, um DLI-Produkte mit leukämiespezifischen T-Zellen herzustellen, die sich sowohl durch eine effizientere T-Zell Generierung durch in vitro Selektion und Kostimulation, als auch durch eine verbesserte Spezifität des T-Zell-Produkts auszeichnen. Lymphozyten-Leukämie Cokulturen (mixed lymphocyte leukaemia cultures) wurden mit CD8 T-Zellen gesunder Spender und HLA-identischen oder einzel-HLA-mismatch AML-Blasten angesetzt und wöchentlich restimuliert. Nach zwei Wochen wurden die T-Zellen 12 Stunden nach Restimulation über den Marker CD137 positiv isoliert und anschließend separat weiterkultiviert. Die isolierten Fraktionen und unseparierten Kontrollen wurden im ELISPOT-Assay und im Chrom-Freisetzungstest an Tag 5 nach der Restimulation getestet. Es wurden keine konsistent nachweisbaren Vorteile im Hinblick auf Wachstum und Funktion der isolierten CD137-positiv Fraktion im Vergleich zur unseparierten Kontrolle gefunden. Verschiedene Isolationsmethoden, Patient-Spender-Systeme, Methoden zur Restimulation, Temperaturbedingungen, Zytokinkombinationen und Methoden der Zytokinzugabe sowie zusätzliche Feeder-Zellen oder AML-Blasten konnten Wachstum, funktionelle Daten und die deutlichen Zellverluste während der Isolation nicht entscheidend beeinflussen. Vitalfärbungen zeigten, dass aktivierungsinduzierter Zelltod CD137-positiver Zellen zu diesen Ergebnissen beitragen könnte. Im Gegensatz zur Stimulation mit AML-Blasten wurden erfolgreiche CD137-Anreicherungen für peptidstimulierte T-Zellen publiziert. Unterschiedliche CD137-Expressionskinetiken, aktivierungsinduzierter Zelltod und regulatorische T-Zellen sind mögliche Faktoren aufgrund derer die CD137-Anreicherung in diesem spezifischen Kontext ungeeinet sein könnte. Der stimulatorische Effekt eines CD137-Signals auf AML-reaktive CD8 T-Zellen wurde mit Hilfe von CD3/CD28 und CD3/CD28/CD137 Antikörper-beschichteten magnetischen beads untersucht. Für Nierenzellkarzinom-reaktive T-Zellen war die Stimulation mit CD3/CD28/CD137 beads genauso effektiv wie mit Tumorzellen und effektiver als mit CD3/CD28 beads. Beide Arten von beads waren für eine Stimulation während der ersten Wochen der Zellkultur geeignet, sodass ein zusätzliches CD137-Signal für die länger anhaltende Expansion tumorreaktiver T-Zellen zur klinischen Anwendung nützlich sein könnte. Die bead-Expansion veränderte die IFN-Sekretion im ELISPOT nicht, aber verursachte eine mäßige Verschlechterung der Zytotoxizität im Chrom-Freisetzungstest. Im Gegensatz dazu zeigten bei AML-reaktiven T-Zellen beide Arten von beads einen nicht apoptosevermittelten, dosisabhängigen zellschädigenden Effekt, der zu einer raschen Abnahme der Zellzahl in Kulturen mit beads führte. Unerwünschte Effekte auf die T-Zell-Funktionalität durch bead-Stimulation sind in der Literatur beschrieben, dennoch gibt es aktuell keine Veröffentlichungen, die eine fundierte Erklärung für den Effekt auf AML-reaktive T-Zellen bieten könnten. Abgesehen von Literaturdaten, die darauf hindeuten, dass CD137 ein vielversprechendes Kandidatenmolekül für die Anreicherung und Expansion von AML-reaktiven T-Zellen sein könnte, zeigen die eigenen Daten sowohl zur CD137-Isolation als auch zur bead-Stimulation, dass für diese spezielle Anwendung CD137 ein ungeeigneter Aktivierungsmarker und Kostimulations-Ligand ist.

Human immunodeficiency virus type-1 Tat is an integral component of the activated transcription-elongation complex.

The human immunodeficiency virus type 1 transactivator protein, Tat, stimulates transcriptional elongation from the viral long terminal repeat. To test whether Tat associates directly with activated transcription complexes, we have used the lac repressor protein (LacR) to "trap" elongating RNA polymerases. The arrested transcription complexes were purified by binding biotinylated templates to streptaviridin-coated magnetic beads. Transcription complexes were released from the magnetic beads following cleavage of the templates with restriction enzymes and were immunoblotted with antibodies to Tat, LacR and RNA polymerase II. The Tat protein copurified with RNA polymerase bound to wild-type templates but did not copurify with transcription complexes prepared by using templates carrying mutations in the transactivation response element (TAR) RNA. We conclude that Tat and cellular cofactors become attached to the transcription complex during its transit through TAR.

Aluminium hydroxide stabilised MnFe2O4 and Fe3O4 nanoparticles as dual-modality contrasts agent for MRI and PET imaging

Magnetic nanoparticles (NPs) MnFe2O4 and Fe3O4 were stabilised by depositing an Al(OH)3 layer via a hydrolysis process. The particles displayed excellent colloidal stability in water and a high affinity to [18F]-fluoride and bisphosphonate groups. A high radiolabeling efficiency, 97% for 18F-fluoride and 100% for 64Cu-bisphosphonate conjugate, was achieved by simply incubating NPs with radioactivity solution at room temperature for 5min. The properties of particles were strongly dependant on the thickness and hardness of the Al(OH)3 layer which could in turn be controlled by the hydrolysis method. The application of these Al(OH)3 coated magnetic NPs in molecular imaging has been further explored. The results demonstrated that these NPs are potential candidates as dual modal probes for MR and PET. In vivo PET imaging showed a slow release of 18F from NPs, but no sign of efflux of 64Cu. © 2014 The Authors.

Development of a novel magnetic resonance imaging contrast agent for pressure measurements using lipid-coated microbubbles

The aim of this study was to prepare gas-filled lipid-coated microbubbles as potential MRI contrast agents for imaging of fluid pressure. Air-filled microbubbles were produced with phospholipid 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) in the presence or absence of cholesterol and/or polyethylene-glycol distearate (PEG-distearate). Microbubbles were also prepared containing a fluorinated phospholipid, perfluoroalkylated glycerol-phosphatidylcholine, F-GPC shells encompassing perfluorohexane-saturated nitrogen gas. These microbubbles were evaluated in terms of physico-chemical characteristics such as size and stability. In parallel to these studies, DSPC microbubbles were also formulated containing nitrogen (N2) gas and compared to air-filled microbubbles. By preventing advection, signal drifts were used to assess their stability. DSPC microbubbles were found to have a drift of 20% signal change per bar of applied pressure in contrast to the F-GPC microbubbles which are considerably more stable with a lower drift of 5% signal change per bar of applied pressure. By increasing the pressure of the system and monitoring the MR signal intensity, the point at which the majority of the microbubbles have been damaged was determined. For the DSPC microbubbles this occurs at 1.3 bar whilst the F-GPC microbubbles withstand pressures up to 2.6 bar. For the comparison between air-filled and N2-filled microbubbles, the MRI sensitivity is assessed by cycling the pressure of the system and monitoring the MR signal intensity. It was found that the sensitivity exhibited by the N2-filled microbubbles remained constant, whilst the air-filled microbubbles demonstrated a continuous drop in sensitivity due to continuous bubble damage.

Magnetic properties of Fe(3)O(4) nanoparticles coated with oleic and dodecanoic acids

Magnetic nanoparticles (NP) of magnetite (Fe(3)O(4)) coated with oleic acid (OA) and dodecanoic acid (DA) were synthesized and investigated through transmission electron microscopy (TEM), magnetization M, and ac magnetic susceptibility measurements. The OA coated samples were produced with different magnetic concentrations (78%, 76%, and 65%) and the DA sample with 63% of Fe(3)O(4). Images from TEM indicate that the NP have a nearly spherical geometry and mean diameter similar to 5.5 nm. Magnetization measurements, performed in zero-field cooled (ZFC) and field cooled processes under different external magnetic fields H, exhibited a maximum at a given temperature T(B) in the ZFC curves, which depends on the NP coating (OA or DA), magnetite concentration, and H. The temperature T(B) decreases monotonically with increasing H and, for a given H, the increase in the magnetite concentration results in an increase in T(B). The observed behavior is related to the dipolar interaction between NP, which seems to be an important mechanism in all samples studied. This is supported by the results of the ac magnetic susceptibility chi(ac) measurements, where the temperature in which chi' peaks for different frequencies follows the Vogel-Fulcher model, a feature commonly found in systems with dipolar interactions. Curves of H versus T(B)/T(B) (H=0) for samples with different coatings and magnetite concentrations collapse into a universal curve, indicating that the qualitative magnetic behavior of the samples may be described by the NP themselves, instead of the coating or the strength of the dipolar interaction. Below T(B), M versus H curves show a coercive field (H(C)) that increases monotonically with decreasing temperature. The saturation magnetization (M(S)) follows the Bloch's law and values of M(S) at room temperature as high as 78 emu/g were estimated, a result corresponding to similar to 80% of the bulk value. The overlap of M/M(S) versus H/T curves for a given sample and the low H(C) at high temperatures suggest superparamagnetic behavior in all samples studied. The overlap of M/M(S) versus H curves at constant temperature for different samples indicates that the NP magnetization behavior is preserved, independently of the coating and magnetite concentration. (C) 2010 American Institute of Physics. [doi: 10.1063/1.3311611]

Characterization of the Biocompatible Magnetic Colloid on the Basis of Fe(3)O(4) Nanoparticles Coated with Dextran, Used as Contrast Agent in Magnetic Resonance Imaging

The magnetic resonance imaging contrast agent, the so-called Endorem (TM) colloidal suspension on the basis of superparamagnetic iron oxide nanoparticles (mean diameter of 5.5 nm) coated with dextran, were characterized on the basis of several measurement techniques to determine the parameters of their most important physical and chemical properties. It is assumed that each nanoparticle is consisted of Fe(3)O(4) monodomain and it was observed that its oxidation to gamma-Fe(2)O(3) occurs at 253.1 degrees C. The Mossbauer spectroscopy have shown a superparamagnetic behavior of the magnetic nanoparticles. The Magnetic Resonance results show an increase of the relaxation times T(1), T(2), and T(2)* with decreasing concentration of iron oxide nanoparticles. The relaxation effects of SPIONs contrast agents are influenced by their local concentration as well as the applied field strength and the environment in which these agents interact with surrounding protons. The proton relaxation rates presented a linear behavior with concentration. The measured values of thermooptic coefficient partial derivative n/partial derivative T, thermal conductivity K, optical birefringence Delta n(0), nonlinear refractive index n(2), nonlinear absorption beta` and third-order nonlinear susceptibility vertical bar chi((3))vertical bar are also reported.

Characterization of Superparamagnetic Iron Oxide Coated with Silicone Used as Contrast Agent for Magnetic Resonance Image for the Gastrointestinal Tract

The present work is a report of the characterization of superparamagnetic iron oxide nanoparticles coated with silicone used as a contrast agent in magnetic resonance imaging of the gastrointestinal tract. The hydrodynamic size of the contrast agent is 281.2 rim, where it was determined by transmission electron microscopy and a Fe(3)O(4) crystalline structure was identified by X-ray diffraction, also confirmed by Mossbauer Spectroscopy. The blocking temperature of 190 K was determined from magnetic measurements based on the Zero Field Cooled and Field Cooled methods. The hysteresis loops were measured at different temperatures below and above the blocking temperature. Ferromagnetic resonance analysis indicated the superparamagnetic nature of the nanoparticles and a strong temperature dependence of the peak-to-peak linewidth Delta H(pp), giromagnetic factor g, number of spins N(S) and relaxation time T(2) were observed. This behavior can be attributed to an increase in the superexchange interaction.

Magnetic characterization by SQUID and FMR of a biocompatible ferrofluid based on Fe(3)O(4)

Biocompatible superparamagnetic iron oxide nanoparticles of magnetite coated with dextran were magnetically characterized using the techniques of SQUID (superconducting quantum interference device) magnetometry and ferromagnetic resonance (FMR). The SQUID magnetometry characterization was performed by isothermal measurements under applied magnetic field using the methods of zero-field-cooling (ZFC) and field-cooling (FC). The magnetic behavior of the nanoparticles indicated their superparamagnetic nature and it was assumed that they consisted exclusively of monodomains. The transition to a blocked state was observed at the temperature T(B) = (43 +/- 1) K for frozen ferrofluid and at (52 +/- 1) K for the lyophilized ferrofluid samples. The FMR analysis showed that the derivative peak-to-peak linewidth (Delta H(PP)), gyromagnetic factor (g), number of spins (N(S)), and spin-spin relaxation time (T(2)) were strongly dependent on both temperature and super-exchange interaction. This information is important for possible nanotechnological applications, mainly those which are strongly dependent on the magnetic parameters.

Chondrogenic differentiation within magnetic-responsive multilayered liquified capsules containing collagen II/TFG-β3 coated microparticles

The use of stem cells is a promising therapeutic approach for the substantial challenge to regenerate cartilage. Considering the two prerequisites, namely the use of a 3D system to enable the chondrogenic differentiation and growth factors to avoid dedifferentiation, the diffusion efficiency of essential biomolecules is an intrinsic issue. We already proposed a liquified bioencapsulation system containing solid microparticles as cell adhesion sites1. Here, we intend to use the optimized system towards chondrogenic differentiation by encapsulating stem cells and collagenII-TGF-β3 PLLA microparticles. As a proof-of-concept, magnetite-nanoparticles were incorporated into the multilayered membrane. This can be a great advantage after implantation procedures to fixate the capsules in situ with the held of an external magnetic patch and for the follow-up through imaging. Results showed that the production of glycosaminoglycans and the expression of cartilage-relevant markers (collagen II, Sox9, aggrecan, and COMP) increased up to 28 days, while hypertrophic (collagen X) and fibrotic (collagen I) markers were downregulated. The presence of nanofibers in the newly deposited ECM was visualized by SEM, which resembles the collagen fibrils of native cartilage. The presence of the major constituent of cartilage, collagen II, was detected by immunocytochemistry and afranin-O and alcian blue stainings revealed a basophilic ECM deposition, which is characteristic of neocartilage. These findings suggest that the proposed system may provide a suitable environment for chondrogenic differentiation.

Magnetic control of flexoelectric domains in a nematic fluid

Aus: Soft matter, Vol. 10.2014, H. 25, S. 4487 - 4497

Morphological and Magnetic Properties of Superparamagnetic Carbon-Coated Fe Nanoparticles Produced by Arc Discharge.

Spherical carbon coated iron particles of nanometric diameter in the 510 nm range have been produced by arc discharge at near-atmospheric pressure conditions (using 58·10 4 Pa of He). The particles exhibit a crystalline dense iron core with an average diameter 7.4 ± 2.0 nm surrounded by a sealed carbon shell, shown by transmission electron microscopy (TEM), selected-area diffrac- tion (SAED), energy-dispersive X-ray analysis (STEM-EDX) and electron energy loss spectroscopy (EELS). The SAED, EDX and EELS results indicate a lack of traces of core oxidized phases showing an efficient protection role of the carbon shell. The magnetic properties of the nanoparticles have been investigated in the 5300 K temperature range using a superconducting quantum interference device (SQUID). The results reveal a superparamagnetic behaviour with an average monodomain diameter of 7.6 nm of the nanoparticles. The zero field cooled and field cooled (ZFC-FC)magnetization curves show a blocking temperature (TB)at room temperature very suitable for biomedical applications (drug delivery, magnetic resonance imaging MRI, hyperthermia).

Morphological and Magnetic Properties of Superparamagnetic Carbon-Coated Fe Nanoparticles Produced by Arc Discharge.

Spherical carbon coated iron particles of nanometric diameter in the 5-10 nm range have been produced by arc discharge at near-atmospheric pressure conditions (using 5-8·10 4 Pa of He). The particles exhibit a crystalline dense iron core with an average diameter 7.4 ± 2.0 nm surrounded by a sealed carbon shell, shown by transmission electron microscopy (TEM), selected-area diffrac- tion (SAED), energy-dispersive X-ray analysis (STEM-EDX) and electron energy loss spectroscopy (EELS). The SAED, EDX and EELS results indicate a lack of traces of core oxidized phases showing an efficient protection role of the carbon shell. The magnetic properties of the nanoparticles have been investigated in the 5-300 K temperature range using a superconducting quantum interference device (SQUID). The results reveal a superparamagnetic behaviour with an average monodomain diameter of 7.6 nm of the nanoparticles. The zero field cooled and field cooled (ZFC-FC)magnetization curves show a blocking temperature (TB)at room temperature very suitable for biomedical applications (drug delivery, magnetic resonance imaging-MRI-, hyperthermia).