Desenvolvimento de pastas cimentantes utilizando cimentos portland compostos para cimentação de poços petrolíferos

The Compound Portland cements are commonly used in construction, among them stand out the CPII-Z, CPII-F and CPIV. These types of cement have limited application on oil well cementing, having its compositional characteristics focused specifically to construction, as cement for use in oil wells has greater complexity and properties covering the specific needs for each well to be coated. For operations of oil wells cementing are used Portland cements designed specifically for this purpose. The American Petroleum Institute (API) classifies cements into classes designated by letters A to J. In the petroleum industry, often it is used Class G cement, which is cement that meets all requirements needed for cement from classes A to E. According to the scenario described above, this paper aims to present a credible alternative to apply the compound cements in the oil industry due to the large availability of this cement in relation to oil well cements. The cements were micro structurally characterized by XRF, XRD and SEM tests, both in its anhydrous and hydrated state. Later technological tests were conducted to determine the limits set by the NBR 9831. Among the compound cements studied, the CPII-Z showed satisfactory properties for use in primary and secondary operations of oil wells up to 1200 meters cementing

Adição de geomanta e tecido não tecido de polipropileno em cimentos geopoliméricos de pega rápida

Geopolymers are cementing materials that depict a number of advantages compared to Portland cement. Contrary to the latter, geopolymers are synthesized at room temperature, thus significantly reducing the emission of CO2 to the atmosphere. Moreover, the composition and synthesis reactions can be tailored to adjust the setting time of the material as well as its compressive mechanical strength. It is then possible to produce geopolymeric cements with short setting times and high compressive strength, although relatively brittle. The objective of the present study was to produce and characterize composite materials by reinforcing fastsetting geopolymeric matrixes with polypropylene geosynthetics (geomats and geotextiles) in an attempt to improve the toughness and tensile strength of the cementing material. Geosynthetics have been increasingly used to reinforce engineering structures, providing higher strength and better toughness. In particular, polypropylene nonwoven and geomats depict other attractive properties such as low density, durability, impact absorption and resistance to abrasion. Fast-setting geopolymers were then synthesized and reinforced with polypropylene nonwoven and geomats. The mechanical strength of the materials, reinforced or not, was characterized. The results showed that relatively short setting times and adequate flowing behavior were achieved by adjusting the composition of the geopolymer. In addition, it is possible to improve the fracture resistance of geopolymeric cements by adding polypropylene geosynthetics. The best results were achieved by reinforcing geopolymer with polypropylene TNT

Biomecânica e otimização topológica com H-adaptatividade em implantes dentários nitretados a plasma em cátodo oco

In recent years there has been a significant growth in technologies that modify implant surfaces, reducing healing time and allowing their successful use in areas with low bone density. One of the most widely used techniques is plasma nitration, applied with excellent results in titanium and its alloys, with greater frequency in the manufacture of hip, ankle and shoulder implants. However, its use in dental implants is very limited due to high process temperatures (between 700 C o and 800 C o ), resulting in distortions in these geometrically complex and highly precise components. The aim of the present study is to assess osseointegration and mechanical strength of grade II nitrided titanium samples, through configuration of hollow cathode discharge. Moreover, new formulations are proposed to determine the optimum structural topology of the dental implant under study, in order to perfect its shape, make it efficient, competitive and with high definition. In the nitriding process, the samples were treated at a temperature of 450 C o and pressure of 150 Pa , during 1 hour of treatment. This condition was selected because it obtains the best wettability results in previous studies, where different pressure, temperature and time conditions were systematized. The samples were characterized by X-ray diffraction, scanning electron microscope, roughness, microhardness and wettability. Biomechanical fatigue tests were then conducted. Finally, a formulation using the three dimensional structural topology optimization method was proposed, in conjunction with an hadaptive refinement process. The results showed that plasma nitriding, using the hollow cathode discharge technique, caused changes in the surface texture of test specimens, increases surface roughness, wettability and microhardness when compared to the untreated sample. In the biomechanical fatigue test, the treated implant showed no flaws, after five million cycles, at a maximum fatigue load of 84.46 N. The results of the topological optimization process showed well-defined optimized layouts of the dental implant, with a clear distribution of material and a defined edge

Expressão imuno-histoquimica de colagenase-1 e gelatinases A e B em mixomas odontogênicos e papilas de germes dentários

The odontogenic myxoma shares cellular and structural aspects with dental papilla, which has been implicated as probable origin of this neoplasm. The aim of the present study was to perform a comparative immunohistochemical analysis for the expression of collagenase-1 (MMP-1) and gelatinases A (MMP-2) and B (MMP-9) in odontogenic myxomas and dental papilla of teeth germs. Twelve cases of odontogenic myxomas and eight specimens of teeth germs were selected. It was taken into consideration the presence or absence of immunoreactivity, the pattern of immunohistochemical distribution of proteases within extracellular matrix, as well as, the number of cells revealing immunostaining for matrix metalloproteinases (MMPs). It was verified a significant difference (p<0,05) in relation to MMP-2 immunoexpression, which was observed only within extracellular matrix of myxomas. Nevertheless, MMP-1 labeling was revealed by most of the cases of odontogenic myxoma, at levels close to those observed in dental papilla. In relation to the pattern of distribution, a significant difference was obtained between specimens (p<0,05), with neoplasms predominantly exhibiting a focal pattern for MMP-1. The quantitative analysis of neoplastic cells labeled for MMPs denoted a significant difference (p<0,05), demonstrating a higher proportion of MMP-1 in comparison to MMPs-2 and -9. It can be concluded that immunohistochemical expression of MMP-1 at levels comparable to those observed in dental papilla and quantitatively superior in relation to MMPs-2 and -9, suggest an implication of this protease on extracellular matrix degradation of odontogenic myxomas. Moreover, the possibility of interactions with receptors involved in cellular adhesion, particularly with integrins, suggests a plausible function on local invasiveness of such neoplasms. Additionally, the presence of a descent immunoexpression gradient for these MMPs on odontogenic myxomas, associated to substrate specificity inherent in each enzyme, suggest the existence of a coordinated mechanism between interstitial collagenase and gelatinases A and B in order to allow an efficient degradation of extracellular matrix and local invasion by neoplastic cells

Urgências em traumatismos dentários: classificação, características e procedimentos

OBJETIVO: Discutir os aspectos das urgências odontológicas relacionadas aos traumatismos dentários, disponibilizando mais informações para médicos pediatras ou plantonistas de serviços de atendimento de urgências e emergências. FONTES DE DADOS: O levantamento dos dados foi realizado na base de dados Pubmed e Bireme, selecionando os artigos dos últimos 13 anos. As palavras-chave utilizadas foram: traumatismo dentário, dente decíduo e dente permanente. Os critérios de inclusão utilizados foram: artigos em inglês e português sobre incidência, prevalência e etiologia, guias de procedimentos e casos clínicos apenas de traumatismo dentário, sendo excluídos artigos de clareamento de dentes traumatizados, traumas faciais ósseos e casos clínicos de acompanhamento reduzido. SÍNTESE DOS DADOS: Os dados foram descritos de forma concisa para se tornar um guia de fácil leitura e rápido acesso em relação à conduta, necessidade de atendimento imediato e correta escolha de soluções para armazenagem dos dentes e fragmentos. CONCLUSÕES: O conhecimento sobre o assunto, a agilidade no tratamento de urgência e o correto encaminhamento do paciente proporcionam melhor prognóstico.

Mudanças dimensionais dos arcos dentários em crianças entre 3 e 6 anos de idade

Para o presente trabalho, 235 crianças pertencentes às creches da Prefeitura Municipal de Araraquara foram avaliadas e moldadas com um dispositivo confeccionado com cera utilidade e palito abaixador de língua na forma dos arcos dentários. No intervalo de um ano as mesmas crianças foram remoldadas afim de se verificar se houveram ou não mudanças nas dimensões do arco dentário decíduo. A partir da obtenção dos modelos em gesso, foram realizadas medições por meio de um dispositivo digitalizador tridimensional denominado MicroScribe-3DX nos instantes inicial (primeira moldagem) e final (moldagem após um ano). Foram avaliadas medidas referentes às distâncias inter-segundos molares, interprimeiros molares, intercaninos, perímetro, comprimento de arco e espaços primatas. Consideraram-se ainda dimorfismo sexual, tipo de arco e influência de hábitos. Concluiu-se que as dimensões transversais sofreram aumento significativo na dentadura decídua, enquanto que o perímetro, o comprimento e os espaços primatas permaneceram constantes. As distâncias intermolares apresentaram dimorfismo sexual, com dimensões maiores no gênero feminino. Com relação às medidas de perímetro, comprimento e espaços primatas não ocorreram diferenças significantes em relação ao gênero. As dimensões de comprimento nos arcos não diferem nos arcos decíduos Tipo I e Tipo II de Baume, enquanto que o diâmetro dos arcos Tipo I de Baume, são maiores do que os do Tipo II. Os hábitos de sucção de dedo e chupeta não provocaram alterações nas dimensões dos arcos decíduos no período observado, de um ano.

Comparative assessment of the flow rate of root canal sealers

OBJETIVO: Este estudo avaliou o escoamento do Acroseal, AH Plus, Endomethasone N, Sealapex e ActiV GP de acordo com a especificação ISO 6876/2001. METODOLOGIA: Um volume de 0,05 mL do cimento manipulado de acordo com as recomendações do fabricante foi colocado numa placa de vidro. Aos 180±5 s após o início da espatulação, uma segunda placa de vidro foi colocada sobre o cimento, seguida por um peso de massa de 100 g para fazer um total de 120±2 g. Dez minutos após o começo da manipulação o peso foi removido e o valor do diâmetro do disco de cimento foi mensurado. A média de 3 mensurações para cada cimento foi tomada como o escoamento do material. Os dados foram comparados estatisticamente pelos testes ANOVA e Tukey. RESULTADOS: Os escoamentos obtidos foram: Acroseal 21.,4 mm, AH Plus 22,72 mm, ActiV GP 24,90 mm, Endomethasone N 18,76 mm e Sealapex 25,15 mm. CONCLUSÃO: Apenas o Endomethasone N não se enquadrou na especificação ISO a qual requer que o cimento tenha um diâmetro não inferior a 20 mm. O Sealapex alcançou o melhor escoamento, mas não foi estatisticamente diferente do Activ GP e AH Plus (P>0,05).

Cimentos endodônticos - selamento marginal apical imediato e após armazenamento de seis meses

Este trabalho avaliou o selamento marginal apical de canais radiculares obturados com os cimentos endodônticos Sealapex, Apexit, Sealer 26 e Ketac Endo. Utilizaram-se 136 raízes, cujos canais radiculares, após o preparo biomecânico, foram obturados pela técnica da condensação lateral ativa com os cimentos em estudo. Metade das amostras, imediatamente após as obturações, foram imersas na solução de azul de metileno a 2% e a outra metade após 6 meses de armazenamento em plasma sangüíneo humano. Observou-se que os cimentos Sealapex e Sealer 26 apresentaram infiltrações médias estatisticamente iguais entre si e menores que as observadas para os demais cimentos (p < 0,05). Amostras imersas no corante imediatamente após a obturação dos canais apresentaram infiltração média menor (0,829 mm) do que aquelas mantidas por 6 meses em plasma sangüíneo humano (1,275 mm). Estas diferenças foram estatisticamente significantes (p < 0,05).

Resistência à corrosão das fases presentes em amálgamas dentários

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Utilização experimental de hidroxiapatita sintética em alvéolos dentários de gatos domésticos (Felis catus): estudo clínico, radiográfico e histomorfométrico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da penetração de agentes ácidos para o condicionamento do esmalte dental em cimentos à base de hidróxido de cálcio.

It was verified the penetration of phosphoric acid into 3 commercial calcium hydroxide-based cements (Life, Renew and Prisma VLC Dycal). The colorimetric method employed permitted the identidication of phosphorus amount in representative samples of 6 successive layers 0.1 mm thick of each material. The acid etching used were the commercial products Scotchbond Etching Gel--3M at 36.114% by weight and Solução Condicionadora--Johnson & Johnson at 36.054% by weight. The contact time was 60 seconds. The result showed that layers 0.1 mm tick for Life and Prisma VLC Dycal and 0.2 mm thick for Renew were able to block the penetration of phosphoric acid solution whereas layers 0.1 mm thick for the 3 cements were able to block the penetration of phosphoric acid gel.

Prevalência de anodontia entre estudantes do 2O grau da cidade de São José dos Campos-Correlação dessa anomalia entre terceiros molares e outros órgão dentários.

The authors studied 201 school children form both sexes, aging 12 to 14 years, in order to identify anodontia, including in third molars. The results indicated a congenital absence of teeth in 24.37% of the examined children, distributed into 10.44% of boys and 13.93% of girls. Anodontia was observed concerning third molar teeth and other teeth, and the correlation was calculated by the total, sex, and hemiarch. The data were presented and discussed, and the results included several conclusions.

Influência da contaminação da dentina por cimentos temporários na resistência da união de sistemas adesivos

Objective: The aim of this study was to assess the bond strength of adhesive systems to dentin contaminated by temporary cements with or without eugenol. Method: Flat dentin surfaces were obtained from twenty-four human third molars. With exception of the control group (n=8), the surfaces were covered with Interim Restorative Material (Caulk Dentsplay, Milford, DE, USA) or Cavit (3M ESPE, St. Paul, MN, USA) and kept in an oven at 37°C for seven days. After removing the cements, the adhesive systems Adper Single Bond (3M ESPE, St. Paul, MN, USA) or Clearfil SE Bond (Kuraray Co. Ltd., Osaka, Japan) were applied in accordance with the manufacturers' recommendations, and then the crowns were constructed in of resin composite. The teeth were sectioned into specimens with a cross-sectional bond area of 0.81mm2, which were submitted to microtensile testing in a mechanical test machine at an actuator speed of 0.5mm/min. The data were analyzed by t- and ANOVA tests, complemented by Tukey tests (α=0.05). Results: For Adper Single Bond (3M ESPE, St. Paul, MN, USA), bond strength did not differ statistically (p>0.05) for all the experimental conditions. For Clearfil SE Bond (Kuraray Co. Ltd., Osaka, Japan), only the Interim Restorative Material (Caulk Dentsplay, Milford, DE, USA) Group showed significantly lower bond strength (30.1 ± 13.8 MPa) in comparison with the other groups; control (38.9 ± 13.5 MPa) and Cavit (3M ESPE, St. Paul, MN, USA) (42.1 ± 11.0 MPa), which showed no significant difference between them. Conclusion: It was concluded that the previous covering of dentin with temporary cement containing eugenol had a deleterious effect on the adhesive performance of the self-etching system only.

Avaliação da liberação de íon fluoreto de cimentos ionoméricos antes e após a recarga e com proteção da superfície

Objective: To evaluate fluoride ion release from two anhydrous glass ionomer cements (GICs) and two resin-modified GICs (RMGICs) before and after recharge with 2% neutral sodium fluoride for 4 min and after surface protection of the Maxxion R GIC with an adhesive system, a cavity varnish and a colorless nail polish. Method: A stainless steel 2x6 mm matrix was used for fabricating 5 specimens of each material, which were immersed in 5 mL of deionized water, renewed every 24 h. Measurements with a potentiometer were performed on days 1, 2, 9 and 17, in the 1st and 2nd phases, and the specimens were buffered with a TISAB III solution. In the 2nd phase, the specimens were subjected to recharge and immersed again in 5 mL of deionized water. In the 3rd phase, the GIC surfaces were protected and readings were made at 5 min, 24 h, 48 h and 72 h. Tukey's post-hoc and Student's t tests were used for statistical analyses (p<0.05). Results: There was statistically significant difference in the comparison between the 1st and 2nd phases for all materials, except at day 2 for Vidrion R and VitroFil LC. In the 3rd phase, it was observed that for all materials, comparison of the first 5 min with the other times revealed statistically significant differences among the means of fluoride ion release. In the comparison with the other times, both the varnish and the colorless nail polish presented statistically significant difference between 24 and 48 h as well as between 24 and 72 h. Conclusion: The anhydrous GICs were more effective in fluoride ion release and recharge compared with the RMGICs. Maxxion R presented a homogeneous and statistically significant behavior in both phases. All materials for surface protection were efficient and the colorless nail polish had the best behavior.

Estudo de propriedades físicas e químicas de um novo cimento selador endodôntico

Pós-graduação em Ciência dos Materiais - FEIS