Design guidelines to enhance pedestrian and transit interaction.

Texas Department of Transportation, Austin

National Workshop on Bus-Wheelchair Accessibility, May 7-9, 1986.

"UMTA Technical Assistance Program"--Cover.

Methodology for the design of urban transportation interface facilities. Final technical report. Executive summary.

Transportation Department, Office of University Research, Washington, D.C.

Seismic design considerations for mass transit facilities /

"DOT-T-94-19."

San Diego wheelchair accessible bus study. Interim report.

Urban Mass Transportation Administration, Washington, D.C.

A procedural guide for the design of transit stations and terminals. Applications guide.

Transportation Department, Office of University Research, Washington, D.C.

Multimodal Transportation in Northeast Seattle: An Integrated Design

Thesis (Master's)--University of Washington, 2016-06

Powertrain optimisation in a hybrid electric bus

This paper describes the use of a formal optimisation procedure to optimise a plug-in hybrid electric bus using two different case studies to meet two different performance criteria; minimum journey cost and maximum battery life. The approach is to choose a commercially available vehicle and seek to improve its performance by varying key design parameters. Central to this approach is the ability to develop a representative backward facing model of the vehicle in MATLAB/Simulink along with appropriate optimisation objective and penalty functions. The penalty functions being the margin by which a particular design fails to meet the performance specification. The model is validated against data collected from an actual vehicle and is used to estimate the vehicle performance parameters in a model-in-the-loop process within an optimisation routine. For the purposes of this paper, the journey cost/battery life over a drive cycle is optimised whilst other performance indices are met (or exceeded). Among the available optimisation methods, Powell's method and Simulated Annealing are adopted. The results show this method as a valid alternative modelling approach to vehicle powertrain optimisation. © 2012 IEEE.

Optimization models for selecting bus stops for accessibility improvements for people with disabilities

Bus stops are key links in the journeys of transit patrons with disabilities. Inaccessible bus stops prevent people with disabilities from using fixed-route bus services, thus limiting their mobility. The Americans with Disabilities Act (ADA) of 1990 prescribes the minimum requirements for bus stop accessibility by riders with disabilities. Due to limited budgets, transit agencies can only select a limited number of bus stop locations for ADA improvements annually. These locations should preferably be selected such that they maximize the overall benefits to patrons with disabilities. In addition, transit agencies may also choose to implement the universal design paradigm, which involves higher design standards than current ADA requirements and can provide amenities that are useful for all riders, like shelters and lighting. Many factors can affect the decision to improve a bus stop, including rider-based aspects like the number of riders with disabilities, total ridership, customer complaints, accidents, deployment costs, as well as locational aspects like the location of employment centers, schools, shopping areas, and so on. These interlacing factors make it difficult to identify optimum improvement locations without the aid of an optimization model. This dissertation proposes two integer programming models to help identify a priority list of bus stops for accessibility improvements. The first is a binary integer programming model designed to identify bus stops that need improvements to meet the minimum ADA requirements. The second involves a multi-objective nonlinear mixed integer programming model that attempts to achieve an optimal compromise among the two accessibility design standards. Geographic Information System (GIS) techniques were used extensively to both prepare the model input and examine the model output. An analytic hierarchy process (AHP) was applied to combine all of the factors affecting the benefits to patrons with disabilities. An extensive sensitivity analysis was performed to assess the reasonableness of the model outputs in response to changes in model constraints. Based on a case study using data from Broward County Transit (BCT) in Florida, the models were found to produce a list of bus stops that upon close examination were determined to be highly logical. Compared to traditional approaches using staff experience, requests from elected officials, customer complaints, etc., these optimization models offer a more objective and efficient platform on which to make bus stop improvement suggestions.

Design of an automated book reader as an assistive technology tool for blind persons

This dissertation introduces a novel automated book reader as an assistive technology tool for persons with blindness. The literature shows extensive work in the area of optical character recognition, but the current methodologies available for the automated reading of books or bound volumes remain inadequate and are severely constrained during document scanning or image acquisition processes. The goal of the book reader design is to automate and simplify the task of reading a book while providing a user-friendly environment with a realistic but affordable system design. This design responds to the main concerns of (a) providing a method of image acquisition that maintains the integrity of the source (b) overcoming optical character recognition errors created by inherent imaging issues such as curvature effects and barrel distortion, and (c) determining a suitable method for accurate recognition of characters that yields an interface with the ability to read from any open book with a high reading accuracy nearing 98%. This research endeavor focuses in its initial aim on the development of an assistive technology tool to help persons with blindness in the reading of books and other bound volumes. But its secondary and broader aim is to also find in this design the perfect platform for the digitization process of bound documentation in line with the mission of the Open Content Alliance (OCA), a nonprofit Alliance at making reading materials available in digital form. The theoretical perspective of this research relates to the mathematical developments that are made in order to resolve both the inherent distortions due to the properties of the camera lens and the anticipated distortions of the changing page curvature as one leafs through the book. This is evidenced by the significant increase of the recognition rate of characters and a high accuracy read-out through text to speech processing. This reasonably priced interface with its high performance results and its compatibility to any computer or laptop through universal serial bus connectors extends greatly the prospects for universal accessibility to documentation.

Design optimization of modern machine drive systems for maximum fault tolerant and optimal operation

Modern electric machine drives, particularly three phase permanent magnet machine drive systems represent an indispensable part of high power density products. Such products include; hybrid electric vehicles, large propulsion systems, and automation products. Reliability and cost of these products are directly related to the reliability and cost of these systems. The compatibility of the electric machine and its drive system for optimal cost and operation has been a large challenge in industrial applications. The main objective of this dissertation is to find a design and control scheme for the best compromise between the reliability and optimality of the electric machine-drive system. The effort presented here is motivated by the need to find new techniques to connect the design and control of electric machines and drive systems. ^ A highly accurate and computationally efficient modeling process was developed to monitor the magnetic, thermal, and electrical aspects of the electric machine in its operational environments. The modeling process was also utilized in the design process in form finite element based optimization process. It was also used in hardware in the loop finite element based optimization process. The modeling process was later employed in the design of a very accurate and highly efficient physics-based customized observers that are required for the fault diagnosis as well the sensorless rotor position estimation. Two test setups with different ratings and topologies were numerically and experimentally tested to verify the effectiveness of the proposed techniques. ^ The modeling process was also employed in the real-time demagnetization control of the machine. Various real-time scenarios were successfully verified. It was shown that this process gives the potential to optimally redefine the assumptions in sizing the permanent magnets of the machine and DC bus voltage of the drive for the worst operating conditions. ^ The mathematical development and stability criteria of the physics-based modeling of the machine, design optimization, and the physics-based fault diagnosis and the physics-based sensorless technique are described in detail. ^ To investigate the performance of the developed design test-bed, software and hardware setups were constructed first. Several topologies of the permanent magnet machine were optimized inside the optimization test-bed. To investigate the performance of the developed sensorless control, a test-bed including a 0.25 (kW) surface mounted permanent magnet synchronous machine example was created. The verification of the proposed technique in a range from medium to very low speed, effectively show the intelligent design capability of the proposed system. Additionally, to investigate the performance of the developed fault diagnosis system, a test-bed including a 0.8 (kW) surface mounted permanent magnet synchronous machine example with trapezoidal back electromotive force was created. The results verify the use of the proposed technique under dynamic eccentricity, DC bus voltage variations, and harmonic loading condition make the system an ideal case for propulsion systems.^

Logical simulation of communication subsystem for Universal Serial Bus (USB)

The primary purpose of this thesis was to design a logical simulation of a communication sub block to be used in the effective communication of digital data between the host and the peripheral devices. The module designed is a Serial interface engine in the Universal Serial Bus that effectively controls the flow of data for communication between the host and the peripheral devices with the emphasis on the study of timing and control signals, considering the practical aspects of them. In this study an attempt was made to realize data communication in the hardware using the Verilog Hardware Description language, which is supported by most popular logic synthesis tools. Various techniques like Cyclic Redundancy Checks, bit-stuffing and Non Return to Zero are implemented in the design to provide enhanced performance of the module.

Metropolitan Governance and Institutional Design: Transportation in the Jakarta Metropolitan Region

In the Jakarta Metropolitan Region (JMR), the lack of co-ordination and appropriate governance has resulted in paralyzing traffic jams at the metropolitan scale that cannot be resolved by a single government entity. The issue of metropolitan governance is especially crucial here as the JMR lacks an established and formally pre-designed system of governance (e.g., in a constitution or other legal regulations). Instead, it relies on the interaction, coordination and cooperation of a multitude of different stakeholders, ranging from local and regional authorities to private entities and citizens. This chapter offers a discussion on the various governance approaches relating to an appropriate institutional design required for transportation issues at the metropolitan scale. The case used is a regional Bus Rapid Transit (BRT) system as an extension to the metropolitan transport system. Institutional design analysis is applied to the case and three possible improvements - i) a ‘Megapolitan’ concept, ii) a regional spatial plan and iii) inter-local government cooperation; were identified that correspond to current debates on metropolitan governance approaches of regionalism, localism and new regionalism. The findings, which are relevant to similar metropolitan regions, suggest that i) improvements at the meso-level of institutional design are more readily accepted and effective than improvements at the macro-level and ii) that the appropriate institutional design for governing metropolitan transportation in the JMR requires enhanced coordination and cooperation amongst four important actors - local governments, the regional agency, the central government, and private companies.

The Roles of ‘Conventional’ and Demand-Responsive Bus Services

Purpose - The roles of ‘conventional’ (fixed-route and fixed-timetable) bus services is examined and compared to demand-responsive services, taking rural areas in England as the basis for comparison. It adopts a ‘rural’ definition of settlements under a population of 10,000. Design/methodology/approach - Evidence from the National Travel Survey, technical press reports and academic work is brought together to examine the overall picture. Findings - Inter-urban services between towns can provide a cost-effective way of serving rural areas where smaller settlements are suitably located. The cost structures of both fixed-route and demand-responsive services indicate that staff time and cost associated with vehicle provision are the main elements. Demand-responsive services may enable larger areas to be covered, to meet planning objectives of ensuring a minimum of level of service, but experience often shows high unit cost and public expenditure per passenger trip. Economic evaluation indicates user benefits per passenger trip of similar magnitude to existing average public expenditure per trip on fixed-route services. Considerable scope exists for improvements to conventional services through better marketing and service reliability. Practical implications - The main issue in England is the level of funding for rural services in general, and the importance attached to serving those without access to cars in such areas. Social implications - The boundary between fixed-route and demand-responsive operation may lie at relatively low population densities. Originality/value - The chapter uses statistical data, academic research and operator experience of enhanced conventional bus services to provide a synthesis of outcomes in rural areas.