Bernard Bernstein Archive, 1941-2008 (bulk bulk 1960-1984).

Bernard Bernstein collection documents professional activities of Bernard Bernstein, a jeweler, metal smith, writer, and teacher. The collection includes artifacts, correspondence, documents, manuscripts, printed materials, photographs, other visual materials, and sketches.The larger part of the collection includes materials dealing with the artistic side of Bernard Bernstein. These materials are found throughout the collection and consist of artifacts produced during his schooling at City College (Series I: Artifacts), various jewelry designs produced by Bernard Bernstein for commercial use (Series III: Designs), certificates and awards (Series V: General), and materials pertaining to a number of shows and exhibits that Bernard Bernstein was a part of (Series IV: Exhibitions and Art Catalogues).Other materials include documents pertaining to Bernard Bernstein education, professional carrier as a teacher ( Series II: City College of the City University of New York, Series V: General), and his articles in professional journals (Series VI: Printed Materials).In some cases materials are accompanied by Bernard Bernstein’s notes explaining the significance and provenance of the documents.

Queens Bet Din Gittin / Rabbi Faber Records. 1947-1994 (bulk 1974-1992)

This is a collection of the records of Rabbi Salamon Faber, Chair of the Queens Bet Din or Rabbinic Court, concerning the gittin (plural of get, Jewish religious divorces) that the Queens Bet Din granted between 1947 and 1992. These records include Rabbi’s Faber’s personal notes about the gittin, correspondence with the husband and wife and with any other concerned parties, copies of civil and religious marriage and divorce documents, divorce contracts signed by the husband, and copies of conversion certificates.

North American Jewish Students Appeal records, undated, 1962, 1964-1996 (bulk 1971-1995)

The records of the North American Jewish Students Appeal (NAJSA or APPEAL) contains documents on two levels of concern: those documents dealing with the NAJSA as a student-run organization promoting Jewish identity among college-aged youth; and those documents dealing with the APPEAL as a fundraising organization for several well-known student constituent organizations. The Constituents were: the Jewish Student Press Service, Lights in Action, the North American Jewish Students Network, the Progressive Zionist Caucus, Response: A Contemporary Jewish Review, Yavneh Religious Students Organization, and Yugntruf Youth for Yiddish. Documents include correspondence, financial records, minutes, press releases, information on grants awarded to student organizations for programming and publishing, student journals, and newspapers, photographs, and ephemera.

Grand Street Boys' Association (New York, N.Y.) Records, undated, 1907-1968, bulk 1940-2000.

The Grand Street Boys' Association began in 1916 as a reunion of men who had grown up on or near Grand Street in the Lower East Side neighborhood of Manhattan and quickly grew into an active club, open to all men (and eventually women) regardless of religion, ethnicity, or social class. The Association promoted welfare projects, acts of fellowship and tolerance, scholarships, youth employment, war efforts, and the elimination of discrimination in sports, among other projects. The collection documents the activities of the Association, as well as the Grand Street Boys' Foundation, its financial arm established in 1945, and its Hobbycraft Program, a charitable program tasked with collecting and redistributing donated items to charitable and nonprofit organizations. Materials include administrative records, financial records, correspondence, minutes, membership records, newsletters, yearbooks, artifacts, speeches, and photographs relating to both the New York Grand Street Boys' Association and the Association's Grand Street House in England. Series I, comprising the majority of the collection, contains the records of the Grand Street Boys' Association. In it are extensive membership records, meeting minutes, annual yearbooks, financial records, administrative material, newsletters, and artifacts. Series II documents the Grand Street Boys' Foundation and contains administrative records and financial records. Some overlap of material will be found in Series I and II such as material pertaining to the relationship between the Association and Foundation. Series III consists of photographs documenting both the Association and Foundation. The photographs show members and highlight the activities of the Grand Street Boys.

Mediaş Jewish Community Photograph Collection 1900-1930s bulk: undated

The collection contains more than 60 black and white photographs from the first decades of the 20th century found in the synagogue of Mediaş (Mediasch, Medgyes), Romania. The photographs were found in the process of an on-going clean-up and restoration project and for the most part are unidentified. The photographs are of community members and their relatives and friends; they consist of group family portraits, individual portraits, babies, and children. Some of the photographs originate from Mediaş and other nearby Transylvanian towns, while others were printed by foreign printing shops and were presumably sent to relatives living in Mediaş.

Max Michel Collection. 1933-1986 Bulk dates: 1933-1937

The bulk of the collections consists of correspondence from the 1930s relating to Michels’s job applications in the U.S. in different academic institutions and activities of the Hilfsverein der Juden in Deutschland. Also included is a 36 p. typescript, ‘Geschichte der Familie Wertheimer’; pamphlets by Juda Magnes and Kurt Blumenfeld on the university in Jerusalem; as well as family trees.

Eva Stroh Family Collection 1860-2005 Bulk: 1912-1950

The Eva Stroh Family Collection provides material on the lives and family history of members of the Sondheimer and Stroh families. The collection consists of numerous photos and several photo albums, family trees, official documents, correspondence, published articles and clippings and some notes, a notebook documenting cultural activities and some daily calendars.

Mixed mode (I and II) crack tip fields in bulk metallic glasses

Stationary crack tip fields in bulk metallic glasses under mixed mode (I and II) loading are studied through detailed finite element simulations assuming plane strain, small scale yielding conditions. The influence of internal friction or pressure sensitivity on the plastic zones. notch deformation, stress and plastic strain fields is examined for different mode mixities. Under mixed mode loading, the notch deforms into a shape such that one part of its surface sharpens while the other part blunts. Increase in mode If component of loading dramatically enhances the normalized plastic zone size, lowers the stresses but significantly elevates the plastic strain levels near the notch tip. Higher internal friction reduces the peak tangential stress but increases the plastic strain and stretching near the blunted part of the notch. The simulated shear bands are straight and extend over a long distance ahead of the notch tip under mode II dominant loading. The possible variations of fracture toughness with mode mixity corresponding to failure by brittle micro-cracking and ductile shear banding are predicted employing two simple fracture criteria. The salient results from finite element simulations are validated by comparison with those from mixed mode (I and II) fracture experiments on a Zr-based bulk metallic glass.

Free-volume dependent pressure sensitivity of Zr-based bulk metallic glass

Instrumented indentation experiments on a Zr-based bulk metallic glass (BMG) in as-cast, shot-peened and structurally relaxed conditions were conducted to examine the dependence of plastic deformation on its structural state. Results show significant differences in hardness, H, with structural relaxation increasing it and shot peening markedly reducing it, and slightly changed morphology of shear bands around the indents. This is in contrast to uniaxial compressive yield strength, sigma(y), which remains invariant with the change in the structural state of the alloys investigated. The plastic constraint factor, C = H/sigma(y), of the relaxed BMG increases compared with that of the as-cast glass, indicating enhanced pressure sensitivity upon annealing. In contrast, C of the shot-peened layer was found to be similar to that observed in crystalline metals, indicating that severe plastic deformation could eliminate pressure sensitivity. Microscopic origins for this result, in terms of shear transformation zones and free volume, are discussed.

High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity

An in situ bulk ultrafine bimodal eutectic Al-Cu-Si composite was synthesized by solidification. This heterostructured composite with microstructural length scale hierarchy in the eutectic microstructure, which combines an ultrafine-scale binary cellular eutectic (alpha-Al + Al2Cu) and a nanometer-sized anomalous ternary eutectic (alpha-Al + Al2Cu + Si), exhibits high fracture strength (1.1 +/- 0.1 GPa) and large compressive plastic strain (11 +/- 2%) at room temperature. The improved compressive plasticity of the bimodal-nanoeutectic composite originates from homogeneous and uniform distribution of inhomogeneous plastic deformation (localized shear bands), together with strong interaction between shear bands in the spatially heterogeneous structure.

Near-threshold fatigue crack growth in bulk metallic glass composites

A major drawback in using bulk metallic glasses (BMGs) as structural materials is their extremely poor fatigue performance. One way to alleviate this problem is through the composite route, in which second phases are introduced into the glass to arrest crack growth. In this paper, the fatigue crack growth behavior of in situ reinforced BMGs with crystalline dendrites, which are tailored to impart significant ductility and toughness to the BMG, was investigated. Three composites, all with equal volume fraction of dendrite phases, were examined to assess the influence of chemical composition on the near-threshold fatigue crack growth characteristics. While the ductility is enhanced at the cost of yield strength vis-a-vis that of the fully amorphous BMG, the threshold stress intensity factor range for fatigue crack initiation in composites was found to be enhanced by more than 100%. Crack blunting and trapping by the dendritic phases and constraining of the shear bands within the interdendritic regions are the micromechanisms responsible for this enhanced fatigue crack growth resistance.

Evidence for a thermally reversing window in bulk Ge-Te-Si glasses revealed by alternating differential scanning calorimetry

Experiments on Ge15Tc85-xSix glasses (2 <= x <= 12) using alternating differential scanning calorimetry (ADSC) indicate that these glasses exhibit one glass transition and two crystallization reactions upon heating. The glass transition temperature has been found to increase almost linearly with silicon content, in the entire composition tie-line. The first crystallization temperature (T-cl) exhibits an increase with silicon content for x<5; T-cl remains almost a constant in the composition range 5 < x <= 10 and it increases comparatively more sharply with silicon content thereafter. The specific heat change (Delta C-p) is found to decrease with an increase in silicon content, exhibiting a minimum at x=5 (average coordination number, (r) = 2.4); a continuous increase is seen in Delta C-p with silicon concentration above x = 5. The effects seen in the variation with composition of T-cl and Delta C-p at x=5, are the specific signatures of the mean-field stiffness threshold at (r) = 2.4. Furthermore, a broad trough is seen in the enthalpy change (Delta H-NR), which is indicative of a thermally reversing window in Ge15Te85-xSix glasses in the composition range 2 <= x <= 6 (2.34 <= (r) <= 2.42).

Electrical switching behavior of bulk Si15Te85-xSbx chalcogenide glasses - A study of compositional dependence

Studies on the electrical switching behavior of melt quenched bulk Si15Te85-xSbx glasses have been undertaken in the composition range (1 <= x <= 10), in order to understand the effect of Sb addition on the electrical switching behavior of Si15Te85-x base glass. It has been observed that all the Si15Te85-xSbx glasses studied exhibit a smooth memory type switching. Further, the switching voltages are found to decrease almost linearly with Sb content, which indicates that the metallicity of the dopant plays a dominant role in this system compared to network connectivity/rigidity. The thickness dependence of switching voltage (V-th) indicates a clear thermal origin for the switching mechanism. The temperature variation of switching voltages reveals that the Si15Te85-xSbx glasses studied have a moderate thermal stability. (C) 2009 Elsevier B.V. All rights reserved.

Process-dependent magnetic properties of Co-doped ZnO in bulk and thin film form

Structural, optical and magnetic studies of Co-doped ZnO have been carried out for bulk as well as thin films. The magnetic studies revealed the superparamagnetic nature for low-temperature synthesized samples, indicating the presence of cobalt metallic clusters, and this is supported by the optical studies. For the high-temperature sintered samples one obtains paramagnetism. The optical studies reveal the presence of Co2+ ions in the tetrahedral sites indicating proper doping. Interestingly, the films deposited by laser ablation from the paramagnetic target showed room temperature ferromagnetism. It appears that the magnetic nature of this system is process dependent.

Observation of a thermally reversing window in bulk Ge15Te85-xInx glasses

Alternating differential scanning calorimetry measurements have been undertaken on the Ge15Te85-xInx (1 <= x <= 11) series of glasses. It is found that there is a marginal decrease in the glass transition temperature (T-g) in the composition range 1 <= x <= 3. Above x = 3, a monotonic increase is seen in T-g which indicates a continuous build-up in network connectivity and absence of any nanophase separation. The non-reversing heat flow (Delta H-NR) has been found to exhibit a broad trough between the compositions x = 3 and 7, which clearly indicates the presence of a thermally reversing window in Ge15Te85-xInx glasses in the composition range 3 <= x <= 7.