Identifizierung chemischer Transportinhibitoren zur Modulation (patho)biologischer Genprodukte

Die intrazelluläre Lokalisation von Proteinen und Makromolekülen unterliegt in Eukaryoten einer strengen Regulation. Insbesondere erlaubt die Kompartimentierung eukaryotischer Zellen in Zellkern und Zytoplasma den simultanen Ablauf räumlich getrennter biochemischer Reaktionen, und damit die unabhängige Regulation zellulärer Programme. Da trotz intensiver Forschungsbemühungen bis dato die molekularen Details sowie die (patho)biologische Bedeutung von Kern-Zytoplasma-Transportprozessen noch immer nicht vollkommen verstanden sind, wurde im Rahmen der vorliegenden Arbeit ein Fokus auf die Identifizierung von chemischen Transportinhibitoren gelegt. Das zu diesem Zweck entwickelte Translokations-Biosensor-System basiert auf der Kombination von autofluoreszierenden Proteinen, sowie spezifisch ausgewählten Kernexport- und Kernimportsignalen. Nach Etablierung geeigneter Zellmodelle, die effizient und stabil die Translokations-Biosensoren exprimieren, wurde die 17 000 Substanzen umfassende Bibliothek der ChemBioNet-Initiative nach Kernexportinhibitoren mittels einer Fluoreszenzmikroskopie-basierten Hochdurchsatzanalyse-Plattform durchmustert. Zunächst wurden Translokations-Algorithmen, welche eine zuverlässige automatisierte Erkennung von Zellkern und Zytoplasma erlauben, optimiert. Im Folgenden konnten acht neue niedermolekulare Kernexport-Inhibitoren identifiziert werden, die sich in der Stärke, der Geschwindigkeit, sowie in der Beständigkeit der vermittelten Inhibition unterscheiden. Die Aktivität der Inhibitoren konnte auf den isolierten nukleären Exportsignalen (NES) von HIV-1 Rev und Survivin als auch auf den entsprechenden Volllängeproteinen mittels Mikroinjektionsexperimenten sowie durch umfassende in vitro und biochemische Methoden bestätigt werden. Zur Untersuchung der funktionellen Einheiten der Inhibitoren wurden homologe Substanzen auf Ihre Aktivität hin getestet. Dabei konnten für die Aktivität wichtige chemische Gruppen definiert werden. Alle Substanzen stellen neue Inhibitoren des Crm1-abhängigen Exports dar und zeigen keine nachweisbare NES-Selektivität. Interessanterweise konnte jedoch eine zytotoxische und Apoptose-induzierende Wirkung auf verschiedene Krebszellarten festgestellt werden. Da diese Wirkung unabhängig vom p53-Status der Tumorzellen ist und die Inhibitoren C3 und C5 die Vitalität nicht-maligner humaner Zellen signifikant weniger beeinträchtigen, wurden diese Substanzen zum internationalen Patent angemeldet. Da der nukleäre Export besonders für Tumorzellen einen wichtigen Überlebenssignalweg darstellt, könnte dessen reversible Hemmung ausgenutzt werden, um besonders in Kombination mit gängigen Krebstherapien eine therapeutisch relevante Tumorinhibition zu erzeugen. Eine weitere Anwendungsmöglichkeit der neuen Exportinhibitoren ist auf dem Gebiet der Infektionskrankheiten zu sehen, da auch die Aktivität des essentiellen HIV-1 Rev-Proteins inhibiert wird. Zusätzlich konnte in der Arbeit gezeigt werden, dass der zelluläre Kofaktor des Crm1-abhängigen Exports des HIV-1 Rev-Proteins, die RNA-Helikase DDX3, ein eigenes NES enthält. Der Nachweis einer direkten Interaktion des HIV-1 Rev- mit dem DDX3-Protein impliziert, dass multiple Angriffstellen für chemische Modulatoren hinsichtlich einer antiviralen Therapie gegeben sind. Da die Vielfalt des chemischen Strukturraums es unmöglich macht diesen experimentell vollständig zu durchmustern, wurden im Rahmen dieser Arbeit auch Naturstoffe als vielversprechende Wirkstoffquelle untersucht. Um zukünftig umfassend bioaktive Substanzen aus diesen hochkomplexen Stoffgemischen experimentell identifizieren zu können, wurde eine Fluoreszenzmikroskopie-basierte Hochdurchsatzanalyse-Plattform am Mainz Screening Center (MSC) etabliert. Damit konnte bereits ein weiterer, bisher unbekannter Exportinhibitor aus Cyphellopsis anomala identifiziert werden. Neben einer Anwendung dieser Substanz als chemisches Werkzeug zur Aufklärung der Regulation von Transportvorgängen, stellt sich auch die evolutionsbiologisch relevante Frage, wie es dem Pilzproduzenten gelingt die Blockierung des eigenen Kernexports zu umgehen. Weiterführende Projekte müssen sich neben der Aufklärung der molekularen Wirkmechanismen der gefundenen Substanzen mit der Identifizierung spezifischer chemischer „Funktionseinheiten“ beschäftigen. Neben einem verbesserten mechanistischen Verständnis von Transportvorgängen stellen die erarbeiteten Transportinhibitoren Vorstufen zur Weiterentwicklung möglicher Wirkstoffe dar. Die im Rahmen dieser Arbeit etablierte Technologie-Plattform und molekularen Werkzeuge stellen darüber hinaus eine wichtige Voraussetzung dar, um eine systematische Suche nach möglichen Wirkstoffen im Forschungsfeld der „Chemischen Biomedizin“ voranzutreiben.

Comparative genomics of metabolic networks of free-living and parasitic eukaryotes

Background Obligate endoparasites often lack particular metabolic pathways as compared to free-living organisms. This phenomenon comprises anabolic as well as catabolic reactions. Presumably, the corresponding enzymes were lost in adaptation to parasitism. Here we compare the predicted core metabolic graphs of obligate endoparasites and non-parasites (free living organisms and facultative parasites) in order to analyze how the parasites' metabolic networks shrunk in the course of evolution. Results Core metabolic graphs comprising biochemical reactions present in the presumed ancestor of parasites and non-parasites were reconstructed from the Kyoto Encyclopedia of Genes and Genomes. While the parasites' networks had fewer nodes (metabolites) and edges (reactions), other parameters such as average connectivity, network diameter and number of isolated edges were similar in parasites and non-parasites. The parasites' networks contained a higher percentage of ATP-consuming reactions and a lower percentage of NAD-requiring reactions. Control networks, shrunk to the size of the parasites' by random deletion of edges, were scale-free but exhibited smaller diameters and more isolated edges. Conclusions The parasites' networks were smaller than those of the non-parasites regarding number of nodes or edges, but not regarding network diameters. Network integrity but not scale-freeness has acted as a selective principle during the evolutionary reduction of parasite metabolism. ATP-requiring reactions in particular have been retained in the parasites' core metabolism while NADH- or NADPH-requiring reactions were lost preferentially.

Outbreaks of an ulcerative and haemorrhagic disease in Arctic char Salvelinus alpinus caused by Aeromonas salmonicida subsp. smithia

Arctic char Salvelinus alpinus farmed in different places in Austria and free of the viral diseases viral haemorrhagic septcaemia (VHS), infectious haematopoietic necrosis (IHN) and infectious pancreatic necrosis (IPN) experienced disease and mortality. Diseased fish showed skin ulceration and pathological signs of sepsis. Aeromonas sp. was isolated as pure culture from the kidney of freshly euthanized diseased fish. Three independent isolates from outbreaks that occurred on 2 of the affected farms were analyzed phylogenetically by DNA sequence analysis of the rrs and gyrB genes and phenotypically with biochemical reactions. All 3 isolates were identified as Aeromonas salmonicida subsp. smithia. Analysis of virulence genes in these isolates revealed the presence of a Type III secretion system as well as several related virulence effector genes including aexT, encoding the Aeromonas exotoxin AexT, aopP and aopH. These genes are characteristic for virulent strains of typical and atypical subspecies of A. salmonicida.

Routine phenotypic identification of bacterial species of the family Pasteurellaceae isolated from animals

Pasteurellaceae are bacteria with an important role as primary or opportunistic, mainly respiratory, pathogens in domestic and wild animals. Some species of Pasteurellaceae cause severe diseases with high economic losses in commercial animal husbandry and are of great diagnostic concern. Because of new data on the phylogeny of Pasteurellaceae, their taxonomy has recently been revised profoundly, thus requiring an improved phenotypic differentiation procedure to identify the individual species of this family. A new and simplified procedure to identify species of Actinobacillus, Avibacterium, Gallibacterium, Haemophilus, Mannheimia, Nicoletella, and Pasteurella, which are most commonly isolated from clinical samples of diseased animals in veterinary diagnostic laboratories, is presented in the current study. The identification procedure was evaluated with 40 type and reference strains and with 267 strains from routine diagnostic analysis of various animal species, including 28 different bacterial species. Type, reference, and field strains were analyzed by 16S ribosomal RNA (rrs) and rpoB gene sequencing for unambiguous species determination as a basis to evaluate the phenotypic differentiation schema. Primary phenotypic differentiation is based on beta-nicotinamide adenine dinucleotide (beta-NAD) dependence and hemolysis, which are readily determined on the isolation medium. The procedure divides the 28 species into 4 groups for which particular biochemical reactions were chosen to identify the bacterial species. The phenotypic identification procedure allowed researchers to determine the species of 240 out of 267 field strains. The procedure is an easy and cost-effective system for the rapid identification of species of the Pasteurellaceae family isolated from clinical specimens of animals.

Phylogenetic analysis of Pasteurella multocida subspecies and molecular identification of feline P. multocida subsp. septica by 16S rRNA gene sequencing

Pasteurella multocida is commonly found in the oral cavity of cats and dogs. In humans it is known as an opportunistic pathogen after bites from these animals. Phenotypic identification of P. multocida based on biochemical reactions is often limited and usually only done on a species level, even though 3 subspecies are described. For molecular taxonomy and diagnostic purposes a phylogenetic analysis of the three subspecies of P. multocida based on their 16S rRNA (rrs) gene sequence was therefore carried out. We found P. multocida subsp. septica on a distinguished branch on the phylogenetic tree of Pasteurellaceae, due to a 1.5% divergence of its rrs gene compared to the two other, more closely related subspecies multocida and gallicida. This phylogenetic divergence can be used for the identification of P. multocida subsp. septica by rrs gene determination since they form a phylogenetically well isolated and defined group as shown with a set of feline isolates. Comparison to routine phenotypic identification shows the advantage of the sequence-based identification over conventional methods. It is therefore helpful for future unambiguous identification and molecular taxonomy of P. multocida as well as for epidemiological investigations.

The ins and outs of phosphatidylethanolamine synthesis in Trypanosoma brucei.

Phospholipids are not only major building blocks of biological membranes but fulfill a wide range of critical functions that are often widely unrecognized. In this review, we focus on phosphatidylethanolamine, a major glycerophospholipid class in eukaryotes and bacteria, which is involved in many unexpected biological processes. We describe (i) the ins, i.e. the substrate sources and biochemical reactions involved in phosphatidylethanolamine synthesis, and (ii) the outs, i.e. the different roles of phosphatidylethanolamine and its involvement in various cellular events. We discuss how the protozoan parasite, Trypanosoma brucei, has contributed and may contribute in the future as eukaryotic model organism to our understanding of phosphatidylethanolamine homeostasis. This article is part of a Special Issue entitled Phospholipids and Phospholipid Metabolism.

Comparison of (31)P saturation and inversion magnetization transfer in human liver and skeletal muscle using a clinical MR system and surface coils.

(31)P MRS magnetization transfer ((31)P-MT) experiments allow the estimation of exchange rates of biochemical reactions, such as the creatine kinase equilibrium and adenosine triphosphate (ATP) synthesis. Although various (31)P-MT methods have been successfully used on isolated organs or animals, their application on humans in clinical scanners poses specific challenges. This study compared two major (31)P-MT methods on a clinical MR system using heteronuclear surface coils. Although saturation transfer (ST) is the most commonly used (31)P-MT method, sequences such as inversion transfer (IT) with short pulses might be better suited for the specific hardware and software limitations of a clinical scanner. In addition, small NMR-undetectable metabolite pools can transfer MT to NMR-visible pools during long saturation pulses, which is prevented with short pulses. (31)P-MT sequences were adapted for limited pulse length, for heteronuclear transmit-receive surface coils with inhomogeneous B1 , for the need for volume selection and for the inherently low signal-to-noise ratio (SNR) on a clinical 3-T MR system. The ST and IT sequences were applied to skeletal muscle and liver in 10 healthy volunteers. Monte-Carlo simulations were used to evaluate the behavior of the IT measurements with increasing imperfections. In skeletal muscle of the thigh, ATP synthesis resulted in forward reaction constants (k) of 0.074 ± 0.022 s(-1) (ST) and 0.137 ± 0.042 s(-1) (IT), whereas the creatine kinase reaction yielded 0.459 ± 0.089 s(-1) (IT). In the liver, ATP synthesis resulted in k = 0.267 ± 0.106 s(-1) (ST), whereas the IT experiment yielded no consistent results. ST results were close to literature values; however, the IT results were either much larger than the corresponding ST values and/or were widely scattered. To summarize, ST and IT experiments can both be implemented on a clinical body scanner with heteronuclear transmit-receive surface coils; however, ST results are much more robust against experimental imperfections than the current implementation of IT.

Biosensors based on vertically interrogated optofluidic sensing cells

El objetivo de la presente tesis doctoral es el desarrollo de un nuevo concepto de biosensor óptico sin marcado, basado en una combinación de técnicas de caracterización óptica de interrogación vertical y estructuras sub-micrométricas fabricadas sobre chips de silicio. Las características más importantes de dicho dispositivo son su simplicidad, tanto desde el punto de vista de medida óptica como de introducción de las muestras a medir en el área sensible, aspectos que suelen ser críticos en la mayoría de sensores encontrados en la literatura. Cada uno de los aspectos relacionados con el diseño de un biosensor, que son fundamentalmente cuatro (diseño fotónico, caracterización óptica, fabricación y fluídica/inmovilización química) son desarrollados en detalle en los capítulos correspondientes. En la primera parte de la tesis se hace una introducción al concepto de biosensor, en qué consiste, qué tipos hay y cuáles son los parámetros más comunes usados para cuantificar su comportamiento. Posteriormente se realiza un análisis del estado del arte en la materia, enfocado en particular en el área de biosensores ópticos sin marcado. Se introducen también cuáles son las reacciones bioquímicas a estudiar (inmunoensayos). En la segunda parte se describe en primer lugar cuáles son las técnicas ópticas empleadas en la caracterización: Reflectometría, Elipsometría y Espectrometría; además de los motivos que han llevado a su empleo. Posteriormente se introducen diversos diseños de las denominadas "celdas optofluídicas", que son los dispositivos en los que se va a producir la interacción bioquímica. Se presentan cuatro dispositivos diferentes, y junto con ellos, se proponen diversos métodos de cálculo teórico de la respuesta óptica esperada. Posteriormente se procede al cálculo de la sensibilidad esperada para cada una de las celdas, así como al análisis de los procesos de fabricación de cada una de ellas y su comportamiento fluídico. Una vez analizados todos los aspectos críticos del comportamiento del biosensor, se puede realizar un proceso de optimización de su diseño. Esto se realiza usando un modelo de cálculo simplificado (modelo 1.5-D) que permite la obtención de parámetros como la sensibilidad y el límite de detección de un gran número de dispositivos en un tiempo relativamente reducido. Para este proceso se escogen dos de las celdas optofluídicas propuestas. En la parte final de la tesis se muestran los resultados experimentales obtenidos. En primer lugar, se caracteriza una celda basada en agujeros sub-micrométricos como sensor de índice de refracción, usando para ello diferentes líquidos orgánicos; dichos resultados experimentales presentan una buena correlación con los cálculos teóricos previos, lo que permite validar el modelo conceptual presentado. Finalmente, se realiza un inmunoensayo químico sobre otra de las celdas propuestas (pilares nanométricos de polímero SU-8). Para ello se utiliza el inmunoensayo de albumina de suero bovino (BSA) y su anticuerpo (antiBSA). Se detalla el proceso de obtención de la celda, la funcionalización de la superficie con los bioreceptores (en este caso, BSA) y el proceso de biorreconocimiento. Este proceso permite dar una primera estimación de cuál es el límite de detección esperable para este tipo de sensores en un inmunoensayo estándar. En este caso, se alcanza un valor de 2.3 ng/mL, que es competitivo comparado con otros ensayos similares encontrados en la literatura. La principal conclusión de la tesis es que esta tipología de dispositivos puede ser usada como inmunosensor, y presenta ciertas ventajas respecto a los actualmente existentes. Estas ventajas vienen asociadas, de nuevo, a su simplicidad, tanto a la hora de medir ópticamente, como dentro del proceso de introducción de los bioanalitos en el área sensora (depositando simplemente una gota sobre la micro-nano-estructura). Los cálculos teorícos realizados en los procesos de optimización sugieren a su vez que el comportamiento del sensor, medido en magnitudes como límite de detección biológico puede ser ampliamente mejorado con una mayor compactación de pilares, alcanzandose un valor mínimo de 0.59 ng/mL). The objective of this thesis is to develop a new concept of optical label-free biosensor, based on a combination of vertical interrogation optical techniques and submicron structures fabricated over silicon chips. The most important features of this device are its simplicity, both from the point of view of optical measurement and regarding to the introduction of samples to be measured in the sensing area, which are often critical aspects in the majority of sensors found in the literature. Each of the aspects related to the design of biosensors, which are basically four (photonic design, optical characterization, fabrication and fluid / chemical immobilization) are developed in detail in the relevant chapters. The first part of the thesis consists of an introduction to the concept of biosensor: which elements consists of, existing types and the most common parameters used to quantify its behavior. Subsequently, an analysis of the state of the art in this area is presented, focusing in particular in the area of label free optical biosensors. What are also introduced to study biochemical reactions (immunoassays). The second part describes firstly the optical techniques used in the characterization: reflectometry, ellipsometry and spectrometry; in addition to the reasons that have led to their use. Subsequently several examples of the so-called "optofluidic cells" are introduced, which are the devices where the biochemical interactions take place. Four different devices are presented, and their optical response is calculated by using various methods. Then is exposed the calculation of the expected sensitivity for each of the cells, and the analysis of their fabrication processes and fluidic behavior at the sub-micrometric range. After analyzing all the critical aspects of the biosensor, it can be performed a process of optimization of a particular design. This is done using a simplified calculation model (1.5-D model calculation) that allows obtaining parameters such as sensitivity and the detection limit of a large number of devices in a relatively reduced time. For this process are chosen two different optofluidic cells, from the four previously proposed. The final part of the thesis is the exposition of the obtained experimental results. Firstly, a cell based sub-micrometric holes is characterized as refractive index sensor using different organic fluids, and such experimental results show a good correlation with previous theoretical calculations, allowing to validate the conceptual model presented. Finally, an immunoassay is performed on another typology of cell (SU-8 polymer pillars). This immunoassay uses bovine serum albumin (BSA) and its antibody (antiBSA). The processes for obtaining the cell surface functionalization with the bioreceptors (in this case, BSA) and the biorecognition (antiBSA) are detailed. This immunoassay can give a first estimation of which are the expected limit of detection values for this typology of sensors in a standard immunoassay. In this case, it reaches a value of 2.3 ng/mL, which is competitive with other similar assays found in the literature. The main conclusion of the thesis is that this type of device can be used as immunosensor, and has certain advantages over the existing ones. These advantages are associated again with its simplicity, by the simpler coupling of light and in the process of introduction of bioanalytes into the sensing areas (by depositing a droplet over the micro-nano-structure). Theoretical calculations made in optimizing processes suggest that the sensor Limit of detection can be greatly improved with higher compacting of the lattice of pillars, reaching a minimum value of 0.59 ng/mL).

Separating Growth from Elastic Deformation during Cell Enlargement1

Plants change size by deforming reversibly (elastically) whenever turgor pressure changes, and by growing. The elastic deformation is independent of growth because it occurs in nongrowing cells. Its occurrence with growth has prevented growth from being observed alone. We investigated whether the two processes could be separated in internode cells of Chara corallina Klien ex Willd., em R.D.W. by injecting or removing cell solution with a pressure probe to change turgor while the cell length was continuously measured. Cell size changed immediately when turgor changed, and growth rates appeared to be altered. Low temperature eliminated growth but did not alter the elastic effects. This allowed elastic deformation measured at low temperature to be subtracted from elongation at warm temperature in the same cell. After the subtraction, growth alone could be observed for the first time. Alterations in turgor caused growth to change rapidly to a new, steady rate with no evidence of rapid adjustments in wall properties. This turgor response, together with the marked sensitivity of growth to temperature, suggested that the growth rate was not controlled by inert polymer extension but rather by biochemical reactions that include a turgor-sensitive step.

Mutant LexA proteins with specific defects in autodigestion.

In self-processing biochemical reactions, a protein or RNA molecule specifically modifies its own structure. Many such reactions are regulated in response to the needs of the cell by an interaction with another effector molecule. In the system we study here, specific cleavage of the Escherichia coli LexA repressor, LexA cleaves itself in vitro at a slow rate, but in vivo cleavage requires interaction with an activated form of RecA protein. RecA acts indirectly as a coprotease to stimulate LexA autodigestion. We describe here a new class of lexA mutants, lexA (Adg-; for autodigestion-defective) mutants, termed Adg- for brevity. Adg- mutants specifically interfered with the ability of LexA to autodigest but left intact its ability to undergo RecA-mediated cleavage. The data are consistent with a conformational model in which RecA favors a reactive conformation capable of undergoing cleavage. To our knowledge, this is the first example of a mutation in a regulated self-processing reaction that impairs the rate of self-processing without markedly affecting the stimulated reaction. Had wild-type lexA carried such a substitution, discovery of its self-processing would have been difficult; we suggest that, in other systems, a slow rate of self-processing has prevented recognition that a reaction is of this nature.

Kinetic discrimination in T-cell activation.

We propose a quantitative model for T-cell activation in which the rate of dissociation of ligand from T-cell receptors determines the agonist and antagonist properties of the ligand. The ligands are molecular complexes between antigenic peptides and proteins of the major histocompatibility complex on the surfaces of antigen-presenting cells. Binding of ligand to receptor triggers a series of biochemical reactions in the T cell. If the ligand dissociates after these reactions are complete, the T cell receives a positive activation signal. However, dissociation of ligand after completion of the first reaction but prior to generation of the final products results in partial T-cell activation, which acts to suppress a positive response. Such a negative signal is brought about by T-cell ligands containing the variants of antigenic peptides referred to as T-cell receptor antagonists. Results of recent experiments with altered peptide ligands compare favorably with T-cell responses predicted by this model.

Infrared microspectroscopy of inflammatory process and colon tumors.

According to the last global burden of disease published by the World Health Organization, tumors were the third leading cause of death worldwide in 2004. Among the different types of tumors, colorectal cancer ranks as the fourth most lethal. To date, tumor diagnosis is based mainly on the identification of morphological changes in tissues. Considering that these changes appears after many biochemical reactions, the development of vibrational techniques may contribute to the early detection of tumors, since they are able to detect such reactions. The present study aimed to develop a methodology based on infrared microspectroscopy to characterize colon samples, providing complementary information to the pathologist and facilitating the early diagnosis of tumors. The study groups were composed by human colon samples obtained from paraffin-embedded biopsies. The groups are divided in normal (n=20), inflammation (n=17) and tumor (n=18). Two adjacent slices were acquired from each block. The first one was subjected to chemical dewaxing and H&E staining. The infrared imaging was performed on the second slice, which was not dewaxed or stained. A computational preprocessing methodology was employed to identify the paraffin in the images and to perform spectral baseline correction. Such methodology was adapted to include two types of spectral quality control. Afterwards the preprocessing step, spectra belonging to the same image were analyzed and grouped according to their biochemical similarities. One pathologist associated each obtained group with some histological structure based on the H&E stained slice. Such analysis highlighted the biochemical differences between the three studied groups. Results showed that severe inflammation presents biochemical features similar to the tumors ones, indicating that tumors can develop from inflammatory process. A spectral database was constructed containing the biochemical information identified in the previous step. Spectra obtained from new samples were confronted with the database information, leading to their classification into one of the three groups: normal, inflammation or tumor. Internal and external validation were performed based on the classification sensitivity, specificity and accuracy. Comparison between the classification results and H&E stained sections revealed some discrepancies. Some regions histologically normal were identified as inflammation by the classification algorithm. Similarly, some regions presenting inflammatory lesions in the stained section were classified into the tumor group. Such differences were considered as misclassification, but they may actually evidence that biochemical changes are in course in the analyzed sample. In the latter case, the method developed throughout this thesis would have proved able to identify early stages of inflammatory and tumor lesions. It is necessary to perform additional experiments to elucidate this discrepancy between the classification results and the morphological features. One solution would be the use of immunohistochemistry techniques with specific markers for tumor and inflammation. Another option includes the recovering of the medical records of patients who participated in this study in order to check, in later times to the biopsy collection, whether they actually developed the lesions supposedly detected in this research.

Proton Conducting Devices and Materials

Thesis (Ph.D.)--University of Washington, 2016-06

Stochastic models for regulatory networks of the genetic toggle switch

Bistability arises within a wide range of biological systems from the A phage switch in bacteria to cellular signal transduction pathways in mammalian cells. Changes in regulatory mechanisms may result in genetic switching in a bistable system. Recently, more and more experimental evidence in the form of bimodal population distributions indicates that noise plays a very important role in the switching of bistable systems. Although deterministic models have been used for studying the existence of bistability properties under various system conditions, these models cannot realize cell-to-cell fluctuations in genetic switching. However, there is a lag in the development of stochastic models for studying the impact of noise in bistable systems because of the lack of detailed knowledge of biochemical reactions, kinetic rates, and molecular numbers. in this work, we develop a previously undescribed general technique for developing quantitative stochastic models for large-scale genetic regulatory networks by introducing Poisson random variables into deterministic models described by ordinary differential equations. Two stochastic models have been proposed for the genetic toggle switch interfaced with either the SOS signaling pathway or a quorum-sensing signaling pathway, and we have successfully realized experimental results showing bimodal population distributions. Because the introduced stochastic models are based on widely used ordinary differential equation models, the success of this work suggests that this approach is a very promising one for studying noise in large-scale genetic regulatory networks.

Stochastic delay differential equations for genetic regulatory networks

Time delay is an important aspect in the modelling of genetic regulation due to slow biochemical reactions such as gene transcription and translation, and protein diffusion between the cytosol and nucleus. In this paper we introduce a general mathematical formalism via stochastic delay differential equations for describing time delays in genetic regulatory networks. Based on recent developments with the delay stochastic simulation algorithm, the delay chemical masterequation and the delay reaction rate equation are developed for describing biological reactions with time delay, which leads to stochastic delay differential equations derived from the Langevin approach. Two simple genetic regulatory networks are used to study the impact of' intrinsic noise on the system dynamics where there are delays. (c) 2006 Elsevier B.V. All rights reserved.