Electrodeposition of gold from formaldehyde-sulfite baths: bath stability and deposits characterization

It was investigated Au(I)-sulfite baths containing formaldehyde. As a result, high stability was achieved for baths containing formaldehyde concentration close to 10 mL L-1 with a lifetime superior to 600 days. On the other hand, cyclic voltammograms indicated that the increase of formaldehyde concentration in the bath promotes decreasing of the maximum cathodic current, so that, if the formaldehyde concentration is high, the surface areal concentration of gold will be low. Also, the lowest surface roughness was obtained for 10 mL L-1 of formaldehyde.

Quaternary geology of the Campbellford, Trenton, Consecon, Tweed, Belleville, Wellington, Sydenham, Bath, and Yorkshire Island map-areas, Ontario /

Sediment relationships observed during geological mapping in southeastern Ontario indicate a relatively simple deglaciation history for the area during late Wisconsin time. The ice from the north (part of the Lake Simcoe lobe) and the Lake Ontario ice lobe, which were coalesced during most of late Wisconsin time, initially separated along the crest of the Oak Ridges Moraine. Available data indicate that the Oak Ridges Moraine is composed primarily of sediments pre-late Wisconsin in age capped by late Wisconsin till and interlobate deposits. Retreat of the northern ice was relatively steady and resulted in the deposition of the Dummer Moraines, a facies of the drumlinized till to the south. Retreat of the Lake Ontario ice lobe into the Lake Ontario basin was interrupted by a re-advance which covered the southeastern half of the map area. The northern ice had already retreated from the area by this time. The Lake Ontario lobe was fed through the St. Lawrence Valley, indicating that the Ottawa Valley was ice filled at this time. High level glacial lakes fronted the ice during deglaciation. These waters quickly fell to low levels as the ice retreated from the St. Lawrence Valley, opening lower outlets.

Studies on Chemical Bath Deposited Semiconducting Copper Selenide and Iron Sulfide Thin Films Useful For Photovoltaic Applications

Chemical bath deposition (CBD)is one of the simplest, very convient and probably the cheapest method for thin film preparation. Photovoltaic is the cleanest and the most efficient mode of conversion of energy to electrical power. Silicon is the most popular material in this field. The present study on chemical bath deposited semiconducting copper selenide and iron sulfide thin films useful for photovoltaic applications. Semiconducting thin films prepared by chemical deposition find applications as photo detectors, solar control coatings and solar cells. Copper selenide is a p-type semiconductor that finds application in photovolitics. Several heterojunction systems such as Cu2-xSe/ZnSe (for injection electro luminescence), Cu2Se/AgInSe2 and Cu2Se/Si (for photodiodes), Cu2-xSe/CdS, Cu2-xSe/CdSe, CuxSe/InP and Cu2-xSe/Si for solar cells are reported. A maximum efficiency of 8.3% was achieved for the Cu2-xSe/Si cell, various preparation techniques are used for copper selenide like vacuum evaporation, direct reaction, electrodeposition and CBD. Instability of the as-prepared films was investigation and is accounted as mainly due to deviation from stoichiometry and the formation of iron oxide impurity. A sulphur annealing chamber was designed and fabricated for this work. These samples wee also analysed using optical absorption technique, XPS (X-ray Photoelectron Spectroscopy) and XRD.(X-Ray Diffraction).The pyrite films obtained by CBD technique showed amorphous nature and the electrical studies carried out showed the films to be of high resistive nature. Future work possible in the material of iron pyrite includes sulphur annealing of the non-stochiometric iron pyrite CBD thin films in the absence of atmospheric oxygen

Visiting england, II : un tomb per Anglaterra, II. 'Visitando Inglaterra, II : una vuelta por Inglaterra, II'.

Expone la historia y los paisajes de Inglaterra que presenta escenas de la vida social y cultural junto con imágenes de ciudades tan emblemáticas como Stratford-upon-Avon, Bath y Cambridge entre otros.

Time to get out of the bath, Shirley.

Es hora de salir del baño, pero Shirley no oye a su madre. Ella está soñando, flota en un mundo de aventuras, en una secreta tierra con bosques verdes, donde viven caballeros valientes montados en caballos blancos, en el que ella participa como uno más de ellos en un torneo, donde los reyes y las reinas flotan con sus flotadores en el foso alrededor del castillo.

Genetic differentiation between hosts and locations in populations of latent Botrytis cinerea in southern England

This study tested the hypothesis that aggressive, localized infections and asymptomatic systemic infections were caused by distinct specialized groups of Botrytis cinerea, using microsatellite genotypes at nine loci of 243 isolates of B. cinerea obtained from four hosts (strawberry (Fragaria ´ananassa), blackberry (Rubus fruticosus agg.), dandelion, (Taraxacum of®- cinale agg.) and primrose (Primula vulgaris)) in three regions in southern England (in the vicinities of Brighton, Reading and Bath). The populations were extremely variable, with up to 20 alleles per locus and high genic diversity. Each host in each region had a population of B. cinerea with distinctive genetic features, and there were also consistent host and regional distinctions. The B. cinerea population from strawberry was distinguished from that on other hosts, including blackberry, most notably by a common 154-bp amplicon at locus 5 (present in 35 of 77 samples) that was rare in isolates from other hosts (9¤166), and by the rarity (3¤77) of a 112-bp allele at locus 7 that was common (58¤166) in isolates from other hosts. There was signi®cant linkage disequilibrium overall within the B. cinerea populations on blackberry and strawberry, but with quite different patterns of association among isolates from the two hosts. No evidence was found for differentiation between populations of B. cinerea from systemically infected hosts and those from locally infected fruits.

Occasional publishers: producing and marketing books in England 1771–1844

Purpose – To investigate the way in which a series of related printing businesses, owned by members of the Gye and Balne families in Bath and London from 1771 to 1844, selected and marketed their titles when they ventured into book printing and publishing. Design/methodology/approach – The basis of this research is extensive archival research analyzing primary sources, mainly the books and ephemera printed by the various firms, supported by information in contemporary newspapers and journals and in biographies of printers and publishers. Findings – The focus of these businesses was not solely on production but that marketing was also considered, and that there was each title was conceived and produced with a particular market in mind. In doing so it provides evidence of relatively advanced marketing strategies in use before 1850 and thus questions the validity of the four-eras model of marketing history. Research limitations/implications – The available primary sources are limited; while a number of books and other printed items have survived there are no extant accounts, correspondence, or other records for any of the firms that were studied. Originality/value – There has been very little research into the way small businesses during this period approached the marketing of their products. This paper is a potential model for further such historical research and also provides an example of how research into specific companies can illuminate the larger history of marketing, potentially changing the way in which we understand the development of consumer society.

Flexural strength of acrylic resin repairs processed by different methods: water bath, microwave energy and chemical polymerization

Denture fractures are common in daily practice, causing inconvenience to the patient and to the dentists. Denture repairs should have adequate strength, dimensional stability and color match, and should be easily and quickly performed as well as relatively inexpensive. Objective: The aim of this study was to evaluate the flexural strength of acrylic resin repairs processed by different methods: warm water-bath, microwave energy, and chemical polymerization. Material and methods: Sixty rectangular specimens (31x10x2.5 mm) were made with warm water-bath acrylic resin (Lucitone 550) and grouped (15 specimens per group) according to the resin type used to make repair procedure: 1) specimens of warm water-bath resin (Lucitone 550) without repair (control group); 2) specimens of warm water-bath resin repaired with warm water-bath; 3) specimens of warm water-bath resin repaired with microwave resin (Acron MC); 4) specimens of warm water-bath resin repaired with autopolymerized acrylic resin (Simplex). Flexural strength was measured with the three-point bending in a universal testing machine (MTS 810 Material Test System) with load cell of 100 kgf under constant speed of 5 mm/min. Data were analyzed statistically by Kruskal-Wallis test (p<0.05). Results: The control group showed the best result (156.04 +/- 1.82 MPa). Significant differences were found among repaired specimens and the results were decreasing as follows: group 3 (43.02 +/- 2.25 MPa), group 2 (36.21 +/- 1.20 MPa) and group 4 (6.74 +/- 0.85 MPa). Conclusion: All repaired specimens demonstrated lower flexural strength than the control group. Repairs with autopolymerized acrylic resin showed the lowest flexural strength.

Leachability of degradation products from hard chairside reline resins in artificial saliva: effect of water-bath post-polymerization treatment

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)