Physical and mechanical characteristic of particleboards produced with residues of sugarcane and stem leaves of bamboo bonded with castor oil adhesive

In this research the aim was produce a particleboard with alternative materials and evaluated its physical and mechanical characteristics. The raw materials used are residues from sucarcane bagasse (SC) (Saccharum officinarum) and stem leaves of bamboo (B) (Dendrocalamus giganteus), bonded with a bi component adhesive based on castor oil. It was produced particleboards with five different traces: 100% SC, 75% SC+25% B, 50% SC+50% B, 25% SC +75%B and 100 % B. Their physical and mechanical characteristics were evaluated accordingly to Brazilian standard NBR 14810-3. Regarding the results obtained, it can be detached that for physical and mechanical evaluation it is evident a negative relation among the amount the sugarcane bagasse and their physical and mechanical characteristics, that is particleboards with low concentrations of sugarcane bagasse had better results. However all particleboards could be recommended for use as sealing particleboards in the segment of civil construction.

Monitoramento do tempo de prensagem e do comportamento da temperatura através da espessura de painéis LVL (Laminated veneer lumber)

The aim of this study was to analyze the behavior of the flow of heat (temperature) through the thickness of panels LVL (Laminated veneer lumber) produced with phenol formaldehyde adhesive, in laboratorial and industrial scales. Experimental program was conducted with five LVL panels (three produced in laboratorial scale and two in industrial scale) with different arrangements of a mix of commercial veneers from tropical pinus from the south region of Sao Paulo State, Brazil, bonded using phenol formaldehyde adhesive. The temperature inside the panels during the pressing process was evaluated using thermocouples type T (cooper-constantan), installed mostly in the center of the glue lines and connected to a data acquisition system. The graphics of temperature as a function of the time showed a gradual increase of temperature up to pre-set values, remaining constant from them. The temperature reached at the center of the panels was adequate to promote the curing of the adhesive. These pre-set values were similar to the minimum values presented by other authors and manufacturers of these adhesives that affirm that temperatures above 100ºC at the center of laminated panels bonded with phenolic adhesives are sufficient to ensure proper cure of the resin. The time necessary for curing of the adhesives confirmed the validity of practical expressions provided by adhesive manufacturers.

SOCIAL MONOGAMY AND BIPARENTAL CARE OF THE NEOTROPICAL SOUTHERN BAMBOO RAT (KANNABATEOMYS AMBLYONYX)

We analyzed social patterns indicative of the mating system and parental care in a population of the southern bamboo rat (Kannabateomys amblyonyx). This arboreal rodent feeds exclusively on bamboo stems and leaves. We conducted fieldwork from August 2003 to October 2004 in southern Brazil (30 degrees 20`-30 degrees 27`S, 50 degrees 50`-51 degrees 05`W), in patches of introduced Chinese bamboo (Bambusa tuldoides). We captured 18 individuals, 7 of which were adults that received radiotransmitters and were followed from 1 to 12 months. Another 5 animals (adults or subadults) received colored collars. We observed paternal care, delayed juvenile dispersal, and reduced degree of sexual dimorphism, all of which are traits typical of social monogamy. Mated males showed a direct parental behavioral repertoire similar to that of females (with the obvious exception of nursing), including grooming, huddling, and food provisioning. Potential monogamy in this species seems to be a flexible strategy linked to low density of bamboo patches. Females were confined to widely spaced., small home ranges, decreasing the possibility of male defense of and access to > 1 female. The arboreal habits of the species possibly increase the risk of inexperienced young falling from trees or else being depreciated when moving exposed through branches. This risk is probably reduced by the extensive biparental care observed, including the providing of low-energy plant food to young in the nest.

Characterization and properties of blended cement matrices containing activated bamboo leaf wastes

The worldwide production of bamboo generates large volumes of leaf wastes, which are deposited in landfills or burned in an uncontrolled manner, with negative effects in the environment. The ash obtained by calcining of the bamboo leaf waste, shows good qualities as supplementary cementing material for the production of blended cements. The current paper shows a detailed scientific study of a Brazilian bamboo leaf ash (BLA) calcined at 600 degrees C in small scale condition, by using different techniques (XRF, XRD, SEM/EDX, FT-IR, TG/DTG) and technical study in order. to analyse the behaviour of this ash in blended cements elaborated with 10% and 20% by mass of BLA. The results stated that this ash shows a very high pozzolanic activity, with a reaction rate constant K of the order of 10(-1)/h and type I CSH gel was the main hydrated phase obtained from pozzolanic reaction. The BLA blended cements (10% and 20%) complied with the physical and mechanical requirements of the existing European standards. (c) 2012 Elsevier Ltd. All rights reserved.

Bamboo overabundance alters forest structure and dynamics in the Atlantic Forest hotspot

With fast growth rates and clonal reproduction, bamboos can rapidly invade forest areas, drastically changing their original structure. In the Brazilian Atlantic Forest, where recent mapping efforts have shown that woody bamboos dominate large areas, the present study assessed the differences in soil and vegetation between plots dominated (>90% of bamboo coverage) and not dominated (<10% of coverage) by the native Guadua tagoara. Surface soil was physically and chemically analyzed, and trees at three size classes (seedling, sapling, and adult) were counted, identified and measured. New inventories were conducted to assess recruitment, mortality, and damage rates. Bamboo plots had more fertile soils (higher bases saturation and lower potential acidity) due to the preferential occurrence of G. tagoara on more clayey soils. Bamboo-dominated plots had lower density of adult trees (diameter >5 cm) and lower species density. In addition, overall tree diameter distribution was very different between environments, with bamboo plots having greater concentration of small-sized trees. Such differences are probably related to the general tendency of higher mortality, recruitment, and damage rates in bamboo plots. Greater physical (wind and bamboo-induced damages) and physiological stress (heat and light) in bamboo plots are probable causes of bamboo-dominated plots being more dynamic. Finally, we discuss the differences between Atlantic and Amazonian Guadua-dominated forests, causes, and possible consequences of bamboo overabundance to the Atlantic Forest conservation. (C) 2012 Elsevier Ltd. All rights reserved.

Thermo and mechanical cycling and veneering method do not influence Y-TZP core/veneer interface bond strength

Objectives: The purpose of this study was to evaluate the influence of thermal and mechanical cycling and veneering technique on the shear bond strength of Y-TZP (yttrium oxide partially stabilized tetragonal zirconia polycrystal) core–veneer interfaces. Materials and methods: Cylindrical Y-TZP specimens were veneered either by layering (n = 20) or by pressing technique (n = 20). A metal ceramic group (CoCr) was used as control (n = 20). Ten specimens for each group were thermal and mechanical cycled and then all samples were subjected to shear bond strength in a universal testing machine with a 0.5 mm/min crosshead speed. Mean shear bond strength (MPa) was analysed with a 2-way analysis of variance and Tukey’s test ( p < 0.05). Failure mode was determined using stereomicroscopy and scanning electron microscopy (SEM). Results: Thermal and mechanical cycling had no influence on the shear bond strength for all groups. The CoCr group presented the highest bond strength value ( p < 0.05) (34.72 7.05 MPa). There was no significant difference between Y-TZP veneered by layering (22.46 2.08 MPa) or pressing (23.58 2.1 MPa) technique. Failure modes were predominantly adhesive for CoCr group, and cohesive within veneer for Y-TZP groups. Conclusions: Thermal and mechanical cycling, as well as the veneering technique does not affect Y-TZP core–veneer bond strength. Clinical significance: Different methods of veneering Y-TZP restorations would not influence the clinical performance of the core/veneer interfaces.

Vergleich der umweltrelevanten Faktoren von Holzfurnierlagenverbundwerkstoffen (WVC – Wood Veneer Composite) und metallischen Werkstoffen am Praxisbeispiel eines Skidfördersystems

Für eine Beurteilung von Produkten bzw. Produktsystemen im Maschinenbau spielen neben technischen Kennwerten immer mehr die Umweltauswirkungen der Systeme eine wichtige Rolle. Diese Anforderungen haben die Nachfrage für nachhaltige und umweltfreundliche Konstruktionswerkstoffe im Maschinenbau erhöht. Eine Möglichkeit für solche ökologisch vorteilhaften Werkstoffe stellen ausgewählte Holzwerkstoffe dar. Mit diesen Holzwerkstoffen sollen technische Produkte entwickelt werden, welche den Unternehmen die Möglichkeit eröffnet, ihren unternehmerischen Beitrag zur Nachhaltigkeit zu steigern und wirtschaftliche Vorteile zu erzielen. Durch diesen Ansatz ist ein gewisses Maß an Ressourcen- und Energieeffizienz verbunden, dass sich kurzfristig und / oder langfristig wirtschaftlich lohnt. Ein damit verbundener gesellschaftlicher Imagegewinn erzeugt einen zusätzlichen Nutzen. Als sogenannte GLP (Green Logistics Plant) wird diese Art der Holzkonstruktion gegenwärtig im Bereich der Fördertechnik entwickelt und angewendet. Ein Anwendungsbeispiel innerhalb der GLP stellt das Gestellsystem für einen Skidförderer dar. Um die ökologische Wirkung der Konstruktionswerkstoffe transparent und nachvollziehbar zu untersuchen, werden vordergründig die Kategorien des Treibhauspotenzials und des (Primär-) Energieaufwandes genutzt. Weiterhin werden die Wirkungskategorien Versauerung, Eutrophierung, Sommersmog und Ozonabbau analysiert. Ergänzend zu bestehenden Untersuchungen soll die ökologische Vorteilhaftigkeit von Holzfurnierlagenverbundwerkstoffe (Wood Veneer Composite – WVC), Baustahl, verzinktem Stahl und Aluminiumlegierungen in der Lebensphase Produktion untersucht werden. Anschließend werden die Ergebnisse auf das Gestell eines Skid-Fördersystems aus WVC und Baustahl übertragen.

The open reading frame of bamboo mosaic potexvirus satellite RNA is not essential for its replication and can be replaced with a bacterial gene.

A satellite RNA of 836 nt depends on the bamboo mosaic potexvirus (BaMV) for its replication and encapsulation. The BaMV satellite RNA (satBaMV) contains a single open reading frame encoding a 20-kDa nonstructural protein. A full-length infectious cDNA clone has been generated downstream of the T7 RNA polymerase promoter. To investigate the role of the 20-kDa protein encoded by satBaMV, satBaMV transcripts containing mutations in the open reading frame were tested for their ability to replicate in barley protoplasts and in Chenopodium quinoa using BaMV RNA as a helper genome. Unlike other large satellite RNAs, mutants in the open reading frame did not block their replication, suggesting that the 20-kDa protein is not essential for satBaMV replication. Precise replacement of the open reading frame with sequences encoding chloramphenicol acetyltransferase resulted in high level expression of chloramphenicol acetyltransferase in infected C. quinoa, indicating that satBaMV is potentially useful as a satellite-based expression vector.

The genetic link between the Chinese bamboo partridge (Bambusicola thoracica) and the chicken and junglefowls of the genus Gallus.

Further comparison of mitochondrial control-region DNA base sequences of 16 avian species belonging to the subfamily Phasianinae revealed the following: (i) Generalized perdicine birds (quails and partridges) are of ancient lineages. Even the closest pair, the common quail (Coturnix coturnix japonica) and the Chinese bamboo partridge (Bambusicola thoracica), maintained only 85.71% identity. (ii) The 12 species of phasianine birds previously and presently studied belonged to three distinct branches. The first branch was made exclusively of members of the genus Gallus, while the second branch was made of pheasants of the genera Phasianus, Chrysolophus, and Syrmaticus. Gallopheasants of the genus Lophura were distant cousins to these pheasants. The great argus (Argusianus argus) and peafowls of the genus Pavo constituted the third branch. The position of peacock-pheasants of the genus Polyplectron in the third branch was similar to that of the genus Lophura in the second branch. Members of the fourth phasianine branch, such as tragopans and monals, were not included in the present study. (iii) The one perdicine species, Bambusicola thoracica, was more closely related to phasianine genera Gallus and Pavo than to members of other perdicine genera. The above might indicate that Bambusicola belong to one-stem perdicine lineage that later splits into two sublineages that yielded phasianine birds, one evolving to Gallus, and the other differentiating toward Pavo and its allies.

Ventilated Stone Veneer: Mechanical Behaviour, Calculation Methodologies, Major Pathologies and Existing Tests

The increase of building pathologies related to the use of stone materials and the use of ventilated stone veneers, requires the reformulation of design concepts in building façades and also the reformulation of the architectural project. The aim of this paper is to identify, analyze and evaluate synthetically building pathologies in stone ventilated façades in order to obtain the main technical conditions to be considered in the architectural design, by interpreting its mechanical behavior and capabilities to prevent such pathologies and to ensure the proper features during the building lifetime. The methodology is based on both laboratory stone tests and in situ tests about construction systems, by analyzing physical and mechanical behavior of the outer layer in relation to other building requirements. The results imply the need of proper sizing, specific quality control and practical application of calculation methods, to control high concentration pressures in ventilated façades by reaching appropriate project solutions. In conclusion, the research about different pathologies of stone ventilated façades, the study of their mechanical behavior, their anchorage and their connection with their constructive aspects, will help to improve the construction quality of the stone ventilated façade in buildings and to enhance the use of natural stone in modern architecture.

Under the veneer of decentralisation. Ukraine's modernisation efforts stall due to lack of local government reform. OSW Commentary No. 102, 2013-02-12

President Viktor Yanukovych and his Party of Regions have been repeating the pledge to decentralise power in Ukraine and to give local government a greater decision-making role ever since the party appeared on the Ukrainian political scene. The implementation of this reform is crucial both for the economic recovery of Ukraine’s regions and the overall modernisation efforts of the Ukrainian state. At present relations between central government and the regions are regulated by Soviet-era legislation that fails to address the modern-day challenges facing Ukraine. The political elite in the country, including the opposition, appear to have reached consensus on the importance of the decentralisation reform. The first attempts to implement changes in this area were made in the late 1990s, followed by a comprehensive reform programme developed between 2007 and 2009 by Yulia Tymoshenko’s government. In 2012, the Constitutional Assembly under the President of Ukraine appointed a team of experts who drafted a document detailing the reform of local government and the territorial organisation of power1. The document envisages the implementation of what effectively are two major reforms: (1) an administrative-territorial reform, which would help consolidate the fragmented administrative structure, creating larger and more economically self-sufficient administrative units, and (2) local government reform, focusing on creating clearly defined powers for local authorities with a view to securing government funding for specific tasks delegated from central government. Nonetheless, despite these measures, and in spite of the rhetoric coming from President Yanukovych and other members of the Party of Regions, it seems unlikely that the reform will be implemented in the foreseeable future. A series of concrete political decisions taken by the president over the past three years indicate that Yanukovych has not abandoned his plan to build a highly centralised political system. This in turn limits the capacity to govern of local authorities and further restricts the sources of funding for Ukraine’s regions. This apparent resistance to change stems from the fact that by implementing the proposed reforms, the president and his political allies would be forced to relinquish much of their control over the political processes taking place in the country and would have to free up the distribution of budgetary resources between Kyiv and the regions. The implementation of the reform within the specified timeframe (i.e. by 2015) is also unlikely due to the upcoming presidential election and the deteriorating economic situation in Ukraine. Without a comprehensive reform of local government, however, Ukraine will be unable to undertake effective modernisation measures, which are key for the socio-economic development of the country’s regions.

Tomb, excavated artifact, Rabbits, Birds, Bamboo and Flowers, center portion: birds and flowers; from the western interior wall of the outer (xiaozhang) coffin

Liaoning. Faku. Yemaotai; hanging scroll, ink and colors on silk

Bamboo and Rocks

Wang Meng; 2 ft. 6 25/64 in. x 10 5/8 in.; hanging scroll, ink on paper

Bamboo and Rocks: upper portion

Wang Meng; hanging scroll, ink on paper

Bamboo and Rocks: lower portion

Wang Meng; hanging scroll, ink on paper