Análise física da estrutura do tecido ósseo bovino

There are diseases in vertebrates associated with the structure of bone tissue that directly affect the locomotor system of the animal. Being a endoskeleton, the diagnosis of these diseases becomes difficult in vivo. The characterization of the physical structure of the bone tissue of healthy animals becomes a major tool in the diagnosis comparison of live animals. Thus, the objective of this work is to determine the average value of the key physical properties of the bone structure used in the clinical diagnosis, such as: bone density, porosity, and mass attenuation coefficient of 59.6 keV photons of bone tissue and bovine and equine check variations in these values. The samples were provided by the pathology department of the Faculty of Veterinary Medicine and Zootechny of Botucatu-SP, which are of one male equine and one female bovine animals, using the radio and metacarpus, together with these materials were supplied the historic them. They were withdrawn ten samples in cuts of 10cm over the bone . These samples were submitted to the wet method of immersion in water for the density, by the method of attenuation of gamma radiation of radioisotope 241Am, it is estimated the mass attenuation coefficient, and then were dried in the oven for determining the content moisture. In determining the porosity of the samples was tight ground, in order to obtain the density of particles. The results for the mass attenuation coefficient of gamma radiation to the levels of saturated humidity, environment humidity, dry humidity respectively 0289 ± 0039; 0286 ± 0040 and 0297 ± 0042. And the density of particles was 2.2691 g/cm3

Associação de prótese fixa, implantes e estética periodontal para reabilitação de pacientes parcialmente edêntulos

Periodontitis is a chronic inflammatory disease that results in the destruction of teeth and their supporting tissues with subsequent tooth loss. The replacement of missing teeth for implant-supported restorations has proven to be a highly predictable treatment method with good long-term prognosis. However, some consequences of tooth loss prevents dental implant placement in an ideal position, where regenerative procedures are necessary for this type of rehabilitation. Less invasive procedures such as conventional prosthesis emerge as a therapeutic option in cases where there is enough bone structure for implants and patient´s non-acceptance for invasive procedures. Thus, this paper aims to present the resolution of rehabilitation through a noninvasive and multidisciplinary treatment. One female patient referred to the clinic presented maladaptive bilateral mandibular fixed prostheses, endodontic lesions, gingival recession, and root sensitivity. For proper resolution of this case, an association among osseointegrated implants, fixed partial prosthesis, tooth extraction, and aesthetic periodontal procedures with the use of subepithelial connective tissue graft was proposed. After two years, the patient shows excellent aesthetics and chewing. Within the limits of this scenario, this paper discusses the various factors that may affect the choice of a particular treatment modality for the rehabilitation of edentulous single spaces.

Avaliação do efeito osteoindutivo do PDGF-BB associado a diferentes carreadores na regeneração óssea em cavidades cirurgicamente criadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Exercício resistido no tratamento e prevenção de osteopenia de ratos machos jovens

Pós-graduação em Ciência Animal - FMVA

Princípios de redução das fraturas panfaciais: revisão de literatura

Are called panfacial fractures when the upper, middle and lower facial thirds present fractures concurrently. In clinical practice, came to imply the involvement of two facial thirds. Panfacial fractures are usually accompanied by other systemic lesions that impair the patient's life and therefore require primary treatment. Almost invariably are associated with damage to soft tissues and severe losses of bone structures which may lead to severe facial deformations and malocclusions. The panfacial fractures treatment is complex because often there isn’t a stable bone structure to guide the reduction of various fractures. Several orders of treatment have been proposed, but they are variations of the two classical approaches "bottom to top and inside-out" and "top to bottom and out-inside". The aim of this paper is to discuss the principles of management and panfacial fractures treatment, emphasizing the sequence of fracture reduction and highlighting its indications, advantages and disadvantages, through literature review and reports of surgical clinic cases. We conclude that the exact sequence of fracture reduction is not as important as developing a treatment plan that allows accurate positioning of the fractured segments.

Modelagem e análise de tensão em estrutura óssea com implante metálico, através do método dos elementos finitos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

TOMOGRAPHIC ANALYSIS FOR C2 SCREW PLACEMENT IN RHEUMATOID ARTHRITIS PATIENTS

Objective: A morphological analysis of the bone structure of 02 in patients with rheumatoid arthritis in order to enhance the security of the stabilization procedures for this vertebra. Methods: We retrospectively analyzed 20 CT scans of the cervical spine performed in patients with rheumatoid arthritis; the following parameters were measured: spinolaminar angle, thickness and length of C2 lamina. Results: The mean values are: 5.92mm and 5.87mm for thickness of right and left laminae retrospectively, 27.75mm for right lamina length and 27.94mm for left lamina length, and 44.7 degrees for spinolaminar angle. Conclusion: The values obtained are consistent with studies in normal subjects published by other groups, with no apparent need for change in the screw placement technique. Level of Evidence IV, Case Series.

Lanthanum carbonate, like sevelamer-HCl, retards the progression of vascular calcification and atherosclerosis in uremic apolipoprotein E-deficient mice

Atherosclerosis and vascular calcification (VC) progression in chronic kidney disease is favored by disturbances of mineral metabolism. We compared the effect of phosphate binder lanthanum (La) carbonate with sevelamer-HCl on atherosclerosis, VC and bone structure and function in mice with chronic renal failure (CRF). Apolipoprotein E-deficient (apoE(-/-)) mice were randomized to one non-CRF and three CRF groups, fed with standard diet (one non-CRF and one CRF) or diet supplemented with either 3% lanthanum carbonate (La3%) or 3% sevelamer-HCl (Sev3%). Both La3% and Sev3% supplemented CRF mice displayed a decrease of serum phosphorus, calcification at both intimal and medial aortic sites and atherosclerosis. This was associated with a reduction of plaque Type I collagen expression by both binders and of positive nitrotyrosine staining in response to sevelamer-HCl only. Increased mineral apposition and bone formation rates in unsupplemented CRF mice were reduced by Sev3% but not by La3%. The beneficial effects of La carbonate and sevelamer-HCl on the progression of VC and atherosclerosis in CRF mice could be mainly due to a decrease in phosphate retention and likewise a reduction of arterial Type I collagen expression. The effect of La carbonate differed from that of sevelamer-HCl in that it did not appear to exert its vascular effects via changes in oxidative stress or bone remodeling in the present model.

Macroscopic and microbiological alterations of bird and small mammal bones buried in a Cerrado biome (south western Brazil)

In this paper, we present the results of an experimental approach developed to study the macroscopic and microbiological alteration of bird and small mammal bones buried under a Cerrado biome. The first experiment evaluated the macroscopic alteration of cooked and fresh carcasses buried through the dry and rainy seasons. The second experiment analyzed the mycobiota associated to the decomposition of a complete bird that remained buried for almost a year. Results show that in tropical forest environments: 1) bone structure and pre-taphonomic factors determine its differential alteration by biochemical processes; 2) fungal populations associated to the decomposition of animal remains depend on soil chemistry and ecological dynamics; 3) even in a corrosive environment, bird bones are more capable of surviving to several mycological decomposition steps. (C) 2011 Elsevier Ltd. All rights reserved.

Development of in vitro methods to test acetabular prosthetic reconstructions (messa a punto di metodi in vitro per la caratterizzazione biomeccanica di ricostruzioni acetabolari)

The revision hip arthroplasty is a surgical procedure, consisting in the reconstruction of the hip joint through the replacement of the damaged hip prosthesis. Several factors may give raise to the failure of the artificial device: aseptic loosening, infection and dislocation represent the principal causes of failure worldwide. The main effect is the raise of bone defects in the region closest to the prosthesis that weaken the bone structure for the biological fixation of the new artificial hip. For this reason bone reconstruction is necessary before the surgical revision operation. This work is born by the necessity to test the effects of bone reconstruction due to particular bone defects in the acetabulum, after the hip prosthesis revision. In order to perform biomechanical in vitro tests on hip prosthesis implanted in human pelvis or hemipelvis a practical definition of a reference frame for these kind of bone specimens is required. The aim of the current study is to create a repeatable protocol to align hemipelvic samples in the testing machine, that relies on a reference system based on anatomical landmarks on the human pelvis. In chapter 1 a general overview of the human pelvic bone is presented: anatomy, bone structure, loads and the principal devices for hip joint replacement. The purpose of chapters 2 is to identify the most common causes of the revision hip arthroplasty, analysing data from the most reliable orthopaedic registries in the world. Chapter 3 presents an overview of the most used classifications for acetabular bone defects and fractures and the most common techniques for acetabular and bone reconstruction. After a critical review of the scientific literature about reference frames for human pelvis, in chapter 4, the definition of a new reference frame is proposed. Based on this reference frame, the alignment protocol for the human hemipelvis is presented as well as the statistical analysis that confirm the good repeatability of the method.

The lifestyle of our kids (LOOK) project: outline of methods

This methods paper outlines the overall design of a community-based multidisciplinary longitudinal study with the intent to stimulate interest and communication from scientists and practitioners studying the role of physical activity in preventive medicine. In adults, lack of regular exercise is a major risk factor in the development of chronic degenerative diseases and is a major contributor to obesity, and now we have evidence that many of our children are not sufficiently active to prevent early symptoms of chronic disease. The lifestyle of our kids (LOOK) study investigates how early physical activity contributes to health and development, utilizing a longitudinal design and a cohort of eight hundred and thirty 7-8-year-old (grade 2) school children followed to age 11-12 years (grade 6), their average family income being very close to that of Australia. We will test two hypotheses, that (a) the quantity and quality of physical activity undertaken by primary school children will influence their psychological and physical health and development; (b) compared with existing practices in primary schools, a physical education program administered by visiting specialists will enhance health and development, and lead to a more positive perception of physical activity. To test the first hypothesis we will monitor all children longitudinally over the 4 years. To test the second we will involve an intervention group of 430 children who receive two 50min physical education classes every week from visiting specialists and a control group of 400 who continue with their usual primary school physical education with their class-room teachers. At the end of grades 2, 4, and 6 we will measure several areas of health and development including blood risk factors for chronic disease, cardiovascular structure and function, physical fitness, psychological characteristics and perceptions of physical activity, bone structure and strength, motor control, body composition, nutritional intake, influence of teachers and family, and academic performance.

Prosthetically driven, computer-guided implant planning for the edentulous maxilla: a model study

OBJECTIVES: To analyze computer-assisted diagnostics and virtual implant planning and to evaluate the indication for template-guided flapless surgery and immediate loading in the rehabilitation of the edentulous maxilla. MATERIALS AND METHODS: Forty patients with an edentulous maxilla were selected for this study. The three-dimensional analysis and virtual implant planning was performed with the NobelGuide software program (Nobel Biocare, Göteborg, Sweden). Prior to the computer tomography aesthetics and functional aspects were checked clinically. Either a well-fitting denture or an optimized prosthetic setup was used and then converted to a radiographic template. This allowed for a computer-guided analysis of the jaw together with the prosthesis. Accordingly, the best implant position was determined in relation to the bone structure and prospective tooth position. For all jaws, the hypothetical indication for (1) four implants with a bar overdenture and (2) six implants with a simple fixed prosthesis were planned. The planning of the optimized implant position was then analyzed as follows: the number of implants was calculated that could be placed in sufficient quantity of bone. Additional surgical procedures (guided bone regeneration, sinus floor elevation) that would be necessary due the reduced bone quality and quantity were identified. The indication of template-guided, flapless surgery or an immediate loaded protocol was evaluated. RESULTS: Model (a) - bar overdentures: for 28 patients (70%), all four implants could be placed in sufficient bone (total 112 implants). Thus, a full, flapless procedure could be suggested. For six patients (15%), sufficient bone was not available for any of their planned implants. The remaining six patients had exhibited a combination of sufficient or insufficient bone. Model (b) - simple fixed prosthesis: for 12 patients (30%), all six implants could be placed in sufficient bone (total 72 implants). Thus, a full, flapless procedure could be suggested. For seven patients (17%), sufficient bone was not available for any of their planned implants. The remaining 21 patients had exhibited a combination of sufficient or insufficient bone. DISCUSSION: In the maxilla, advanced atrophy is often observed, and implant placement becomes difficult or impossible. Thus, flapless surgery or an immediate loading protocol can be performed just in a selected number of patients. Nevertheless, the use of a computer program for prosthetically driven implant planning is highly efficient and safe. The three-dimensional view of the maxilla allows the determination of the best implant position, the optimization of the implant axis, and the definition of the best surgical and prosthetic solution for the patient. Thus, a protocol that combines a computer-guided technique with conventional surgical procedures becomes a promising option, which needs to be further evaluated and improved.

Aproximação facial forense: relação entre as estruturas ósseas e a porção inferior do nariz

Este trabalho teve o propósito de avaliar a relação entre a cartilagem alar e a abertura piriforme a partir de imagens de tomografia computadorizada cone-beam e a relação do nariz com o padrão esquelético vertical da face. A pesquisa foi realizada com 96 imagens de indivíduos de ambos os sexos (49 masculino e 47 feminino), com idades entre 18 e 65 anos classificados de acordo com sua tipologia facial. Para a realização das marcações e mensurações de interesse foi utilizado o software OsiriX. A tipologia facial foi acessada através de três metodologias: índice facial, ângulo goníaco e proporção entre as alturas faciais. No corte axial da imagem de tomografia computadorizada, foram aferidas quatro grandezas lineares: largura do nariz externo, distância entre as inserções alares, extensão da base da abertura piriforme e máxima largura da abertura piriforme. Todas as grandezas foram mensuradas por dois examinadores em concordância. A análise dos resultados obtidos mostrou que há correlação entre as larguras do nariz externo e da abertura piriforme e entre a base da cavidade nasal e a distância entre as inserções alares. A largura da abertura piriforme aumenta proporcionalmente mais que a do nariz. Além disso, a tipologia facial longa associa-se à largura nasal.

A biological-inspired support frame for an artificial cornea

Bilateral corneal blindness represents a quarter of the total blind, world-wide. The artificial cornea in assorted forms, was developed to replace opaque non-functional corneas and to return sight in otherwise hopeless cases that were not amenable to corneal grafts; believed to be 2% of corneal blind. Despite technological advances in materials design and tissue engineering no artificial cornea has provided absolute, long-term success. Formidable problems exist, due to a combination of unpredictable wound healing and unmanageable pathology. To have a solid guarantee of reliable success an artificial cornea must possess three attributes: an optical window to replace the opaque cornea; a strong, long term union to surrounding ocular tissue; and the ability to induce desired host responses. A unique artificial cornea possesses all three functional attributes- the Osteo-odonto-keratoprosthesis (OOKP). The OOKP has a high success rate and can survive for up to twenty years, but it is complicated both in structure and in surgical procedure; it is expensive and not universally available. The aim of this project was to develop a synthetic substitute for the OOKP, based upon key features of the tooth and bone structure. In doing so, surgical complexity and biological complications would be reduced. Analysis of the biological effectiveness of the OOKP showed that the structure of bone was the most crucial component for implant retention. An experimental semi-rigid hydroxyapatite framework was fabricated with a complex bone-like architecture, which could be fused to the optical window. The first method for making such a framework, was pressing and sintering of hydroxyapatite powders; however, it was not possible to fabricate a void architecture with the correct sizes and uniformity of pores. Ceramers were synthesised using alternative pore forming methods, providing for improved mechanical properties and stronger attachment to the plastic optical window. Naturally occurring skeletal structures closely match the structural features of all forms of natural bone. Synthetic casts were fabricated using the replamineform process, of desirable natural artifacts, such as coral and sponges. The final method of construction by-passed ceramic fabrication in favour of pre-formed coral derivatives and focused on methods for polymer infiltration, adhesion and fabrication. Prototypes were constructed and evaluated; a fully penetrative synthetic OOKP analogue was fabricated according to the dimensions of the OOKP. Fabrication of the cornea shaped OOKP synthetic analogue was also attempted.

Modelaje geométrico de estructura ósea

En CAD/CAGC/CG la organización topológica de datos de formas geométricas presenta dificultades: (i) las características matemáticas de la superficie dependen de la consideraciones no geométricas, (ii) los datos presentan una aleatoriedad por efectos del muestreo, y, (iii) una digitalización xyz incluye en general varias direcciones e intervalos de muestreo -- En consecuencia, esta investigación presenta herramientas (portables a diferentes servidores CAD) para la organización topológica de datos de digitalizaciones y un caso de recuperación de formas óseas -- En los dos casos los resultado obtenidos rompen la combinación cerrada hardware - software propietarios tradicionales, con la consecuente reducción en costos de tecnología